- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
uses white) so base the color of the border on SC_NORM_ATTR rather
than hardcoding BG_BLACK.
- Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings
(see also sys/dev/syscons/syscons.h rev. 1.82).
syscons(4) and its pseudo-devices don't get confused (including by
other device drivers) with the system controller devices which are
also termed 'sc' in the OFW tree (and which we probably want to
interface with hwpmc(4) one day).
VTB_FRAMEBUFFER specific code. On sparc64 we don't use a buffer of
type VTB_FRAMEBUFFER (see syscons.c) and excluding the respective
code here allows to compile syscons(4) without isa(4).
Requested by: joerg, marcel, yongari
a band-aid allowing to call this function savely multiple times, e.g.
during sckbdprobe() and sc_probe_unit(). Otherwise calling it a second
time results in a non-working keyboard. This needs a lot of more work
to actually do the right thing and work like expected.
- Let sunkbd_configure() return the number of the found keyboards, i.e.
1 in case probing succeeds, as it's expected. The return values of the
keyboard configure functions however currently aren't checked so this
doesn't make a difference at the moment.
- Use FBSDID.
Use bus_generic_probe() and add a bus_add_child() interface method to
allow device drivers to use the identify method to add themselves if
need be (e.g. syscons(4)).
- Use FBSDID.
consist of the expected number of address and size cells (we can't use
dynamic arrays here because at the point in the boot process when this
code is used malloc() doesn't work, yet). This fixes a Fast Data Access
MMU Miss when uart(4) (erroneously) calls OF_decode_addr() to decode
the address of PS/2 keyboards. PS/2 keyboards use a different and also
undocumented scheme at the first parent node than mapping at 'ranges'
properties. It's however not worth implementing that other scheme and
actually also fits atkbdc(4) better to just start at the first parent
node of PS/2 keyboards which is the 8042 controller (I have atkbdc(4)
working that way).
- Use FBSDID.
MFC after: 1 month
which doesn't assume a hardware cursor on __sparc64__ rather than on
DEV_CREATOR. If we want to include more than one framebuffer driver in
e.g. the GENERIC kernel all drivers have to work the same way. Now that
DEV_CREATOR is no longer used remove it from options.sparc64.
and restoring the metadata. In particular, the metadata-restore
functions now all accept a file descriptor and a pathname. If the
file descriptor is set and the platform supports the appropriate
syscall, restore the metadata through the file descriptor. Otherwise,
restore it through the pathname. This is complicated by varying
syscall support (FreeBSD has an fchmod(2) but no fchflags(2), for
example) and because non-file entries don't have an fd to use in
restoring attributes (for example, mknod(2) doesn't return a file
handle).
MFC after: 14 days
address. One was alltraps_with_regs_pushed, the other was calltrap.
When the stack tracer walks up, it looks for magic symbol names to
determine how to parse non-standard stack frames, such as a trapframe.
It was looking for "calltrap". Which of the two symbols you got depended
on things like Phase of moon, etc. If you were unlucky, you got a
garbage stack trace for things like 'debug.trace_on_panic', which would
completely hide the actual source of the problem.
of MCOUNT to have a C version and an asm version with the same name and
not have LOCORE ifdefs to distinguish them. <machine/profile.h> provides
a C version and <machine/asmacros.h> provides an assembler version.
Discussed with: bde
shell meta characters it is not passed to the shell, but the command
is executed directly (given that the line is not a shell builtin) and
that the line with a meta character is passed to the shell.
controllers of Sun PCIO-2 chips which are used onboard in most of
the newer PCI-based sun4u machines (cosmetic change as they were also
already probed as generic FWOHCI without this). As with gem(4), hme(4)
and ohci(4) detect whether their intpin register is valid and correct
it if necessary, i.e. set the respective IVAR to the right value for
allocating the IRQ resource, as some of them come up having it set
to 0 (in fact in all machines I'm currently aware of the FireWire
part being enabled). This fixes attaching affected controllers.
Apporved by: simokawa
Tested by: Michiel Boland <michiel@boland.org>
MFC after: 1 month
in case of IP fast forwarding. Enqueue a taskqueue(9) task instead of
calling xl_rxeof() directly.
Reported & tested by: Slava Alpatov
Reviewed by: wpaul
MFC after: 1 week
pointer. If kernel malloc(0) returns a valid pointer, it needs to be
freed. If it returns NULL, it's ok to free this also.
Submitted by: pjd
Reviewed by: imp, dfr
Obtained from: Coverity Prevent
