This was pretty harmless as netmasks on a POINTOPOINT
interface are pretty much ignored, but it looked funny.
Mention the configured netmask in ``show ipcp''.
Describe in more detail what a proxy arp entry is.
Added "options ATA_STATIC_ID" that wires ATA disks like the old wd driver.
Fixed problems:
Dont use more sectors/intr than the drive supports.
Fix announce of > 8.4G disks.
Dont call ad_interrupt/ad_transfer when no disks config'd.
Use the right page# for CDR write mode params.
Fix breakage when no PCI support in kernel.
Implement DEVFS stuff.
General code clenaup.
Higher numbers led to smaller quanta.
In discussion with BDE, change this parameter to be in uSecs
to make it machine independent,
and limit it to non zero multiples of 'tick' (rounding down).
Also make the variabel globally available so that the present function that
returns its value (used for posix scheduling I believe) can go away.
Submitted by: Bruce Evans <bde@freebsd.org>
the read lock around the subyte operations in mincore. After the lock is
reacquired, use the map's timestamp to determine if we need to restart
the scan.
This produced races resulting in panics and filesystem corruptions
under some circumstances.
Reviewed by: luoqi chen <luoqi@freebsd.org>
Reviewed by: Kirk McKusick <mckusick@mckusick.com>
Submitted by: Matt Dillon <dillon@freebsd.org>
time now.
For whatever reason, the kernel seems to have generated SIGIOs
previously without an initial fcntl(...,F_SETOWN), but does no longer.
This caused window(1) to wait indefinitely for input.
Also, undo rev 1.3 of wwspawn.c, it was not well-thought, and
apparently not even tested at all. The blindly (even in a nonsensical
place like the comment on top of the function) applied replacement of
vfork() by fork() totally ignored that window(1) *does* abuse the
feature of vfork() where a modification of the parent's address space
is possible (in this case, to notify the parent of an erred exec*).
Also, with vfork(), it is guaranteed that the parent is only woken up
after the exec*() happened, where the replacement by fork() made the
parent to almost always become runnable again before the child, in
which case the parent simply told `subprocess died'. Unfortunately,
working around _this_ seems to be a lot more of redesign work compared
to little gained value, so i think relying on the specifics of vfork()
is the simpler way.
Submitted by: Philipp Mergenthaler <un1i@rz.uni-karlsruhe.de>
Describe /dev/vinum/control*
Describe drive "referenced" state.
Remove warning about kldunload; it seems to work now.
Still more descriptions of how to debug things.
Wait4 zombies.
make_devices: Don't try if the /dev directory is mounted read-only.
Create daemon superdevice /dev/vinum/controld.
Format a couple of multiline comments conformant with style(9).
for us.
Rebuild the (almost empty) /dev/vinum directory.
vinum_start: remove superflous "read" parameter when starting with no
parameters.
vinum_stop: without an argument, stop Vinum and remove the kld if
it's idle.
vinum_saveconfig: New command to save configuration.
Change VINUM_SAVECONFIG: it now requires a parameter. 0 means
"configuration updates are finished, please save", and 1 means "please
just save the config". This second meaning is invoked by the new
"saveconfig" command to vinum(8).
Recognize "referenced" drives by the lack of a slash in the device
name, not by a NUL character.
vinum_scandisk: return error indication (ENOENT if we can't find any
vinum drive, otherwise 0).
VINUM_SAVECONFIG: change parameters.
Don't save config while we're reading it from disk.
Change the way we handle the daemon: if we can't communicate with it
for 1 second (which is possible), start a new one. The daemon saves
its pid in daemonpid; on each iteration of the main loop the daemon
checks whether it's still in favour. If not, it silently exits.
Also, when trying to communicate with the daemon, check daemonpid
first. If it's set to 0, don't even try.
Rename the VF_KERNELOP to VF_DISKCONFIG and checkkernel () to
checkdiskconfig (), which better describes their function.
Disable configuration updates if we have an error reading in the
configuration. This stops a "shoot-in-foot" problem where a mistake
can cause the configuration to be obliterated.
Tidy up some messages, which included superfluous \ns.
Recognize RAID-5 configuration information even in the non-RAID-5
version. This fixes shoot-in-foot problems where starting the wrong
version of vinum would kill RAID-5 plexes.
Recognize drives that have been referenced, but for which no physical
location is known. This is part of a modification which will
ultimately allow incrementally reading configurations. Such drives
will have a device name "unknown".
New function return_drive_space () returns space to a drive.
Previously this was part of free_sd ().
give_sd_to_drive: don't do it if the subdisk needs more space than the
drive has available.
config_sd: if reading config from disk, accept plex offset, drive
offset and length specs of -1 to indicate error conditions.
parse_config: return ENOENT if the "read" command doesn't find any
drives.
remove_sd_entry: don't do it, even by force, if it's open.
If the size of a striped or RAID-5 plex is not an integral multiple of
the stripe size, trim the size until it is.
reinstate update_volume_config, which had atrophied, to recalculate
the size of a volume if a plex has shrunk due to stripe size
considerations.
