be preempted here as this will enter back into this function, but the
hardware could be in an inconsistant state, and the vfp unit will be off
when switced back to this function.
Sponsored by: The FreeBSD Foundation
copying the pcb. These values may have been changed just before the call
to fork and without a call to cpu_switch, where they would have been saved.
Sponsored by: The FreeBSD Foundation
initial thread. It is read by the ELF image activator as the virtual
size of the PT_GNU_STACK program header entry, and can be specified by
the linker option -z stack-size in newer binutils.
The soft RLIMIT_STACK is auto-increased if possible, to satisfy the
binary' request.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This requires a patch to redirect the output to a separate DAC when
the headphones are used. While there, add device strings for Intel
Broadwell HDA controllers and Realtek ALC292 codecs.
MFC after: 1 week
If the direction is not PF_OUT we can never be forwarding. Some input packets
have rcvif != ifp (looped back packets), which lead us to ip6_forward() inbound
packets, causing panics.
Equally, we need to ensure that packets were really received and not locally
generated before trying to ip6_forward() them.
Differential Revision: https://reviews.freebsd.org/D2286
Approved by: gnn(mentor)
AC_ADVINFO_CHANGED.
Without this change, newly inserted hard disks won't always have their
physical path device nodes created. The problem reproduces most readily
when attaching a large number of disks at once.
Differential Revision: https://reviews.freebsd.org/D2290
Reviewed by: mav, imp
MFC after: 2 weeks
Sponsored by: Spectra Logic
set past this point in the code. The packet should be dropped and
not massaged as it is here.
Differential Revision: https://reviews.freebsd.org/D2266
Submitted by: eri
Sponsored by: Rubicon Communications (Netgate)
the capability do not try to take the mutex at all.
Replaces misbegotten attempt from reverted commit 281276
Pointed out by: glebius
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D2262
'BUS_PROBE_DEFAULT'. This allows bhyve's 'ppt' driver to claim ownership
of the device and pass it through to the guest.
In the common case where there are no competing drivers for USB controllers
this change is a no-op.
Reviewed by: hselasky
MFC after: 2 weeks
x86 symlink on i386 and amd64. Before this incorrect symlinks were being
created on armi and i386.
Differential Revision: https://reviews.freebsd.org/D2283
Reviewed by: emaste, imp
Sponsored by: The FreeBSD Foundation
use PAE format for the page tables, but does not incur other
consequences of the full PAE config. In particular, vm_paddr_t and
bus_addr_t are left 32bit, and max supported memory is still limited
by 4GB.
The option allows to have nx permissions for memory mappings on i386
kernel, while keeping the usual i386 KBI and avoiding the kernel data
sizing problems typical for the PAE config.
Intel documented that the PAE format for page tables is available
starting with the Pentium Pro, but it is possible that the plain
Pentium CPUs have the required support (Appendix H). The goal is to
enable the option and non-exec mappings on i386 for the GENERIC
kernel. Anybody wanting a useful system on 486, have to reconfigure
the modern i386 kernel anyway.
Discussed with: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This is only the minimum set of files needed to boot in qemu. As such it is
missing a few things.
The bus_dma code is currently only stub functions with a full implementation
from the development tree to follow.
The gic driver has been copied as the interrupt framework is different. It
is expected the two drivers will be merged by the arm intrng project,
however this will need to be imported into the tree and support for arm64
would need to be added.
This includes code developed by myself, SemiHalf, Ed Maste, and Robin
Randhawa from ARM. This has been funded by the FreeBSD Foundation, with
early development by myself in my spare time with assistance from Robin.
Differential Revision: https://reviews.freebsd.org/D2199
Reviewed by: emaste, imp
Relnotes: yes
Sponsored by: The FreeBSD Foundation
There are a few differences between the two. On arm we need to provide a
list of addresses we may be mapping before we have initialised the virtual
memory subsystem, however on arm64 we allocate a small (2MiB for a 4k
granule) range to be used for such purposes.
Differential Revision: https://reviews.freebsd.org/D2249
Sponsored by: The FreeBSD Foundation
public_ifa6 may be set to NULL after taking a reference to a previous
address list element. Instead, only take the reference after leaving the
loop but before releasing the address list lock.
Differential Revision: https://reviews.freebsd.org/D2253
Reviewed by: ae
MFC after: 2 weeks
This uses a non-standard (who would guess that) inlining method
that is useful for legacy GNU software. This attribute was added
in GCC 4.1.3. Older versions of clang would just ignore the
attribute but as lately it is supported also there.
This is currently unused but it is required for the
FORTIFY_SOURCE extension.
handles versions 0.1 and 0.2 of the standard on 32-bit ARM.
With this driver we can shutdown in QEMU. Further work is needed to
turn secondary cores on on boot and to support later revisions of the
specification.
Submitted by: Robin Randhawa <Robin.Randhawa at ARM.com>
Sponsored by: The FreeBSD Foundation
"Intelб╝ Processor Vendor-Specific ACPI Interface Specification",
issied Dec 2014. Previous revision 005 was from Sep 2006.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The carambola2 exposes all the gpio pins, but some are reserved for
core functions (eg usb, ethernet, etc.) Others are configured by default
to be available as normal GPIO pins to do interesting things with.
GPIO 18->23 is the I2S, SLIC and SPDIF device pins, but none of those
are currently used. So, just allow those to show up.
Tested:
* AR9344, Carambola 2
* (.. bitbang SPI to an Adafruit LCD via libgpio, because FreeBSD could
do with more shiny output devices that aren't network interfaces.)
TODO:
There are some other pins aren't currently included here, but should be.
The LED pins are for the internal switch inside the AR9344.
* GPIO 0+1 are "LED0 + LED1", but they're tied to high for bootstrapping.
* GPIO 13-17 are "LED2..7", but they're tied (H, L, L, L, H) for bootstrapping.
* GPIO 11 and 12 are UART RTS/CTS or I2S; but GPIO 12 is tied L for bootstrap.
Check whether the page being requested is either resident or on swap. If
not, read from the zero_region instead of instantiating an unnecessary page.
This avoids consuming memory for sparse files on tmpfs, when they are read
by applications that do not use SEEK_HOLE/SEEK_DATA (which is most of them).
Reviewed by: kib
MFC after: 1 week
Sponsored by: Spectra Logic
To accomplish this, we must put the Synaptics hardware in passthrough
mode when talking to the trackpoint.
I only performed minor style modifications.
Submitted by: Jan Kokemüller <jan.kokemueller at gmail.com>
MFC after: 1 week
Enable two finger scrolling by default and disable the edge scrolling if
the touchpad has no physical zone for it. Disable directional scrolling
by default to avoid using extended buttons as scroll buttons.
Add support for ClickPad. On Lenovo laptops, this is the button
reported when one presses the touchpad.
While there, fix a problem where the extended buttons were not reporting
the button release event correctly: we need to save the state of the
buttons and report it to sysmouse until we receive a packet from the
touchpad indicating the button has been released. This makes it
possible to use an extended button to resize a window. On Lenovo
laptops, the major buttons are actually reported as extended buttons.
Tested by: many (current@)
MFC after: 1 week
This is needed with the pl011 driver. Before this change it would default
to a shift of 0, however the hardware places the registers at 4-byte
addresses meaning the value should be 2.
This patch fixes this for the pl011 when configured using the fdt. The
other drivers have a default value of 0 to keep this a no-op.
MFC after: 1 week
supply clk81 information. It also changes the hardware strings
in some of the drivers to match what's present in the GNU files.
Submitted by: John Wehle
Reviewed by: imp
