The interesting thing is that looking through Darren's commit logs,
the line containing an extern ppsratecheck() definition was removed
from the v5-1-RELEASE branch but not from HEAD (I have taken his
CVS tree and converted it to GIT). There is a commit adding an
additional #if defined to the empty block. I can only assume that
this was intentional for something later. Looking through HEAD the
extern ppsratecheck() is there. However if we put it back it would
conflict with a static ppsratecheck() definition in fil.c when
building ipftest.
Therefore we remove this empty block.
ppsratecheck() is a function in the FreeBSD kernel. However ipftest
cannot call the ppsratecheck() in the kernel. Therefore one exists in
fil.c for use when building the userland ipftest utility which
approximates the packet filter in userland for testing of ipfilter
rules against packets captured with tcpdump.
MFC after: 1 week
The vnode is not opened, so it ends up with the malloced buffers otherwise.
Reported and tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The presence of allocated v_object does not imply that the buffer is
necessary VMIO kind. Buffer might has been allocated before the
object created, then the buffer is malloced. Although we try to avoid
such situation, it seems to be still legitimate.
Reported and tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Error messages in gai_strerror(3) vary largely among OSs.
For new software we largely replaced the obsoleted EAI_NONAME and
with EAI_NODATA but we never updated the corresponding message to better
match the intended use. We also have references to ai_flags and ai_family
which are not very descriptive for non-developer end users.
Bring new new error messages based on informational RFC 3493, which has
obsoleted RFC 2553, and make them consistent among the header adn
manpage.
MFC after: 1 month
Differentical Revision: D18630
framework is available. pfil(9) has been in FreeBSD since FreeBSD 5
and according to svn log was first committed to HEAD in 2000, therefore
it is safe to say the check is no longer needed in FreeBSD.
pfil(9) first appeared in NetBSD 1.3 (hence the name NETBSD_PF).
Therefore it is safe to say that it is supported by every NetBSD system
today. The framework also exists in illumos.
As ipfilter code is shared and exchanged between FreeBSD and NetBSD, and
at some point in the future illumos too, and as all three platforms have
pfil(9), the redundant NETBSD_PF #defines and #ifdefs are removed.
MFC after: 1 week
g_io_deliver() finishing initialization of the bio, but g_io_deliver()
actually destroys the bio. INVARIANTS makes the bug obvious by
overwriting the bio with garbage.
Restore the old order for calling devstat (except don't restore not calling
it for the error case), and translate to the devstat KPI so that this order
works.
Reviewed by: kib
To check if txsync can be skipped, it is necessary to look for
unseen TX space. However, this means comparing ring->cur
against ring->tail, rather than ring->head against ring->tail
(like nm_ring_empty() does).
This change also adds some more comments to explain the optimization
performed at the beginning of netmap_poll().
MFC after: 3 days
Sponsored by: Sunny Valley Networks
The bug was introduced by r339639, although it is present in the upstream
netmap code since 2015. It is due to resetting the want_rx variable to
POLLIN, rather than resetting it to POLLIN|POLLRDNORM.
It only affects select(), which uses POLLRDNORM. poll() is not affected,
because it uses POLLIN.
Also, it only affects FreeBSD, because Linux skips the optimization
implemented by the piece of code where the bug occurs.
MFC after: 3 days
Sponsored by: Sunny Valley Networks
Quick follow-up to r342362: options can appear multiple times now, so
clean up all of them as needed. For non-OPTIONS options, this has no effect
since they're already de-duplicated.
MFC after: 1 week
X-MFC-With: r342362
config(8)'s option handling has been written to allow duplicate options; if
the value changes, then the latest value is used and an informative message
is printed to stderr like so:
/usr/src/sys/amd64/conf/TEST: option "VERBOSE_SYSINIT" redefined from 0 to 1
Currently, this is only a possibility for cpu types, MAXUSERS, and
MACHINE_ARCH. Anything else duplicated in a config file will use the first
value set and error about duplicated options on subsequent appearances,
which is arguably unfriendly since one could specify:
include GENERIC
nooptions VERBOSE_SYSINIT
options VERBOSE_SYSINIT
to redefine the value later anyways.
Reported by: mmacy
MFC after: 1 week
The nvmecontrol code that did the devlist assumed that we had a
tightly-packed allocation of units. Since pci writing exists, this
isn't the case. Loop over the first 256 units, which is a reasonable
number of possible units.
Sponsored by: Netflix
clustering is not done. The bug caused extreme slowness for large
files in some cases.
There is no way to tell VOP_BMAP() how many blocks are wanted, so for
all file systems it has to waste time in some cases by searching for
more contiguous blocks than will be accessed. For msdosfs, it also
clobbered the fatchain cache in these cases by advancing the cache to
point to the chain entry for block that won't be read. This makes
the cache useless for the next sequential i/o (or VOP_BMAP()), so the
fat chain is searched from the beginning. The cache only has 1 relevant
entry, so it is similarly useless for random i/o.
Fix this by only advancing the cache to point to the chain entry for
the first block that will be read. Clustering uses results from
VOP_BMAP(), so when more than 1 block is read by clustering, the cache
is not advanced as optimally as before, but it is at most 1 cluster
size behind and searching the chain through the blocks for this cluster
doesn't take too long.
Add a generic mechanism to override mp?_wait_command's timeout behavior,
which continues to invoke reinit by default. Invokers who set
cm_timeout_handler may avoid automatic reinit and do their own handling.
Adapt mp?sas_get_sata_identify to this mechanism and remove its callout
hack.
Reviewed by: scottl
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18614
In the event that the ID command timed out, mps(4)/mpr(4) did not free the
command until it could be cancelled. However, it freed the associated
buffer (cm_data). Fix the lifetime issue by freeing the associated buffer
only after Abort Task or controller reset.
Reviewed by: scottl
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18612
mainly clustering and read-ahead.) Copy the initialization from ffs,
and also copy a couple of lines of ffs's nearby style for initialization
order and whitespace.
A correct fix would de-duplicate the initialization and fix bitrot in it
instead of adding another instance of the duplication. Complications to
use the size preferred by the device have been reduced to hard-coding
slightly pessimal and/or inconsistent defaults, using large code that was
almost needed to support the complications.
For msdosfs, the result was that mnt_iosize_max was DFTLPHYS (64K) but is
now MAXPHYS (128K).
Small modifications to the nmreplay man page.
Used igor and mandoc tools to fix warnings and errors.
Reviewed by: bcr
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18629
Changelist:
- General reformatting
- Fix packet duplication in cons(). Whenever cons() reached the
burst limit it would send all pending packets without advancing
head. This caused the last injected packet to be sent again in
the next round.
- Fix full-speed transmissions after first loop.
MFC after: 3 days
This code validates the netmap buf_size against the interface MTU
and maximum descriptor size, to make sure the values are consistent.
Moving this functionality to its own function is needed because this
function is also called by Linux-specific code.
MFC after: 3 days
implement not double-caching for reads from vnode-backed md devices.
Use VOP_ADVISE() similarly instead of !IO_DIRECT unsimilarly for writes.
Add a "cache" option to mdconfig to allow changing the default of not
caching.
This depends on a recent commit to fix VOP_ADVISE(). A previous version
had optimizations for sequential i/o's (merge the i/o's and only uncache
for discontiguous i/o's and for full blocks), but optimizations and
knowledge of block boundaries belong in VOP_ADVISE(). Read-ahead should
also be handled better, by supporting it in md and discarding it in
VOP_ADVISE().
POSIX_FADV_DONTNEED is ignored by zfs, but so is IO_DIRECT.
POSIX_FADV_DONTNEED works better than IO_DIRECT if it is not ignored,
since it only discards from the buffer cache immediately, while
IO_DIRECT also discards from the page cache immediately.
IO_DIRECT was not used for writes since it was claimed to be too slow,
but most of the slowness for writes is from doing them synchronously by
default. Non-synchronous writes still deadlock in many cases.
IO_DIRECT only has a special implementation for ffs reads with DIRECTIO
configured. Otherwise, if it is not ignored than it uses the buffer and
page caches normally except for discarding everything after each i/o,
and then it has much the same overheads as POSIX_FADV_DONTNEED. The
overheads for reading with ffs and DIRECTIO were similar in tests of md.
Reviewed by: kib
POSIX_FADV_DONTNEED). The most broken case was for applications that
advise for the whole file and then do block-aligned i/o's 1 block at
a time. Then advice is sent to VOP_ADVISE() 1 block at a time, but
in vop_stdadvise() the 1-block advice was turned into 0-block advice
for the buffer cache part.
The bugs were caused partly by callers representing the region as
(a_start, a_end), where a_end is actually the maximum, and everything
else representing the region as (start, end) where 'end' is actually
the end (1 after the maximum). The maximum a_end must be rounded up,
but was rounded down. Also, rounding to page boundaries was inconsistent.
The bugs and fixes have no effect for zfs and other file systems that
don't use the buffer cache or the page cache. Most or all file systems
currently use the default VOP_FADVISE(), but it finds a null buffer cache
and a null page cache for file systems that don't use normal methods.
Reviewed by: kib
be called before VFS_ROOT() is called. Move the call for VFS_STATFS()
so that it is done after VFS_MOUNT(), but before VFS_ROOT().
This change actually improves the robustness of the mount system
call because it returns an error rather than failing silently
when VFS_STATFS() returns failure.
Reported by: Rebecca Cran <rebecca@bluestop.org>
Sponsored by: Netflix
When the NFSv4 server was coded, I believed that the specification authors
did not want NFSv4 servers to require a client to use a reserved port#.
However, recently it has been noted that the Linux NFSv4 server does support
a check for a reserved port#.
Since both the FreeBSD and Linux NFSv4 clients use a reserved port# by
default, enabling vfs.nfsd.nfs_privport to require a reserved port# for
NFSv4 the same as it does for NFSv2, 3 seems reasonable.
The only case where this could cause a POLA violation is a FreeBSD NFSv4
server with vfs.nfsd.nfs_privport set, but with NFSv4 clients doing mounts
without using a reserved port# (< 1024).
Tested by: chaz.newton58@gmail.com
PR: 234106
MFC after: 1 week
Move static variable definition (cdevsw) to a more conventional location
(the C file it is used in), rather than a header.
This fixes the GCC warning, -Wunused-variable ("defined but not used") when
the tpm20.h header is included in files other than tpm20.c (e.g.,
tpm_tis.c).
X-MFC-with: r342084
Sponsored by: Dell EMC Isilon
Currently, the installer uses pre-created 800KB FAT12 filesystems that
it dd's onto the ESP partition.
This changeset improves that by having the installer generate a FAT32
filesystem directly onto the ESP using newfs_msdos and then copying
loader.efi into /EFI/freebsd.
For live installs it then runs efibootmgr to add a FreeBSD boot entry
in the BIOS.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17947
The reason for this change is that currently, a send/recv
takes many hours to time out.
This is suboptimal in the bootloader because it means for example
that NFS will take hours to fail before allowing subsequent access
methods such as gzip to be tried.
Setting MAXWAIT to 300 seconds (5 minutes) still allows slow
connections of 1Mb to be used to download a 30MB kernel file.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18544
When receiving TCP segments the stack protects itself by limiting
the resources allocated for a TCP connections. This patch adds
an exception to these limitations for the TCP segement which is the next
expected in-sequence segment. Without this patch, TCP connections
may stall and finally fail in some cases of packet loss.
Reported by: jhb@
Reviewed by: jtl@, rrs@
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D18580
