- Add vm_phys_early_add_seg(), complementing vm_phys_early_alloc(), to
ensure that segments registered during hammer_time() are placed in the
right domain. Otherwise, since the SRAT is not parsed at that point,
we just add them to domain 0, which may be incorrect and results in a
domain with only several MB worth of memory.
- Fix uma_startup1() to try allocating memory for zones from any domain.
If domain 0 is unpopulated, the allocation will simply fail, resulting
in a page fault slightly later during boot.
- Change _vm_phys_domain() to return -1 for addresses not covered by the
affinity table, and change vm_phys_early_alloc() to handle wildcard
domains. This is necessary on amd64, where the page array is dense
and pmap_page_array_startup() may allocate page table pages for
non-existent page frames.
Reported and tested by: Rafael Kitover <rkitover@gmail.com>
Reviewed by: cem (earlier version), kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25001
This is in preparation for booting via loader(8). Lift these macros from arm64
so we don't need to worry about the size when inserting new elements. This
could have been done in r359673, but I didn't think I would be returning to
this function so soon.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D24910
r359374 introduced crypto_apply function which takes as argument a function pointer
that is expected to return an int, however aesni hash update functions
return void.
Because of that the function pointer passed was simply cast with
its return value changed.
This resulted in undefined behavior, in particular when mbuf is used, (ipsec)
m_apply checks return value of function pointer passed to it
and in our case bogusly fails after calculating hash of the first mbuf
in chain.
Fix it by changing signatures of sha update routines in aesni and
dropping the casts.
Submitted by: Kornel Duleba
Reviewed by: jhb, cem
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D25030
If there's no data to read from xenstore short-circuit
xctrl_on_watch_event to return early, there's no reason to continue
since the lack of data would prevent matching against any known event
type.
Sponsored by: Citrix Systems R&D
MFC with: r352925
MFC after: 1 week
The correct type to use to represent disk sectors is blkif_sector_t
(which is an uint64_t underneath). This avoid truncation of the disk
size calculation when resizing on i386, as otherwise the calculation
of d_mediasize in xbd_connect is truncated to the size of unsigned
long, which is 32bits on i386.
Note this issue didn't affect amd64, because the size of unsigned long
is 64bits there.
Sponsored by: Citrix Systems R&D
MFC after: 1 week
On amd64 we already avoid using memory below 4GB in order to prevent
clashes with MMIO regions, but i386 was allowed to use any hole in
the physical memory map in order to map Xen pages.
Limit this to memory above the 1MB boundary on i386 in order to avoid
clashes with the MMIO holes in that area.
Sponsored by: Citrix Systems R&D
MFC after: 1 week
fib[46]_lookup_nh_ represents pre-epoch generation of fib api,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Conversion is straight-forwarded, as the only 2 differences are
requirement of running in network epoch and the need to handle
RTF_GATEWAY case in the caller code.
Differential Revision: https://reviews.freebsd.org/D24974
fib4_lookup_nh_ represents pre-epoch generation of fib api,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Switch call to use new fib4_lookup(), allowing to eventually
deprecate old api.
Differential Revision: https://reviews.freebsd.org/D24977
fib4_lookup_nh_ represents pre-epoch generation of fib api,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Conversion is straight-forwarded, as the only 2 differences are
requirement of running in network epoch and the need to handle
RTF_GATEWAY case in the caller code.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24976
fib6_lookup_nh_ represents pre-epoch generation of fib api,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Conversion is straight-forwarded, as the only 2 differences are
requirement of running in network epoch and the need to handle
RTF_GATEWAY case in the caller code.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24973
fibX_lookup_nh_ represents pre-epoch generation of fib api,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Use specialized fib[46]_check_urpf() from newer KPI instead,
to allow removal of older KPI.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24978
Found by running libc tests with radix enabled.
Detect unsigned integer wrapping with a postcondition.
Note: Radix MMU is not enabled by default yet.
Sponsored by: Tag1 Consulting, Inc.
For kernel tls, sosend() needs to call ktls_frame() on the mbuf list
to be sent. Without this patch, this was only done when sosend()'s
arguments used a uio_iov and not when an mbuf list is passed in.
At this time, sosend() is never called with an mbuf list argument when
kernel tls is in use, but will be once nfs-over-tls has been incorporated
into head.
Reviewed by: gallatin, glebius
Differential Revision: https://reviews.freebsd.org/D24674
Until net80211 grows a specific ticks type that matches the system,
manually use the same type as the kernel/net80211 'ticks' type
(signed int.)
Tested:
* AR9380, STA mode
The list of arches list there matches the list of arches where
default VM_NRESERVLEVEL > 0. Before sparc64 removal, that was the
only arch that defined VM_NRESERVLEVEL > 0 to help with cache coloring,
but did not implemented superpages. Now it can be simplified.
Submitted by: alc
Reviewed by: markj
During any kind of shutdown, kern_reboot calls geli's pre_sync event hook,
which tries to destroy all unused geli devices. But during a panic, geli
can't destroy any devices, because the scheduler is stopped, so it can't
switch threads. A livelock results, and the system never dumps core.
This commit fixes the problem by refusing to destroy any devices during
panic, used or otherwise.
PR: 246207
Reviewed by: jhb
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D24697
The scan task refactoring stuff circa 2014-2016 broke the blocking task
into a taskqueue with some async bits, but it apparently broke scans
being interrupted by traffic.
Notably - the new "field" SCAN_PAUSE sets both SCAN_INTERRUPT and SCAN_CANCEL,
and a bunch of existing code was checking for SCAN_CANCEL only and breaking
the scan. Unfortunately it was then (a) cancelling the scan entirely and
(b) not notifying userland that scan was done.
So:
* Update the calls to scan_end() to only pass in 1 (saying the scan is complete)
if SCAN_CANCEL is set WITHOUT SCAN_INTERRUPT. If both are set then yes,
the scan is interrupted, but it isn't canceled - it's just paused.
* Update the "did the scan flags change whilst the driver was called" logic
to check for canceled scans, not interrupted scans.
* The "scan done" logic now explicitly checks for either interrupted or
completed scans. This accounts for the situation where a scan is being
aborted via traffic but it ALSO happens to have finished (ie the last
channel was checked.)
This doesn't ENTIRELY fix scanning as the resume function is broken
due to incorrect ticks math. Thus, the second half of this patch
changes the ieee80211_ticks_*() macros to use int instead of long,
matching the logic that the TCP code does with ticks and handles
wrapping / negative ticks values. If cast to long then the wrapping
math wouldn't work right (ie, if ticks was actually negative,
ie, after the system has been up for a while.)
This allows contbgscan() to correctly calculate if a scan should
continue based on ticks and ic->ic_lastdata .
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D25031
Fix the netinet/netinet6 divert tests falsely reporting 'ipdivert module is
not loaded' when the divert module is built into the kernel
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D25026
This function convert a char * to a u16.
Simply use strtoul and cast to compare for ERANGE
Sponsored-by: The FreeBSD Foundation
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D24996
This macros swap an rcu pointer with a normal pointer.
The condition only seems to be used for debug/warning under linux, ignore
for now.
Sponsored-by: The FreeBSD Foundation
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D24954
Only add check_add_overflow and check_mul_overflow as those are the only
two needed function by DRM v5.3.
Both gcc and clang have builtin to do this check so use them directly
but throw an error if the compiler/code checker doesn't support this builtin.
Sponsored-by: The FreeBSD Foundation
Reviewed by: hselsasky
Differential Revision: https://reviews.freebsd.org/D25015
Add minimal support for creating stage 2 IPA -> PA mappings. For this we
need to:
- Create a new vmid set to allocate a vmid for each Virtual Machine
- Add the missing stage 2 attributes
- Use these in pmap_enter to create a new mapping
- Handle stage 2 faults
The vmid set is based on the current asid set that was generalised in
r358328. It adds a function pointer for bhyve to use when the kernel needs
to reset the vmid set. This will need to call into EL2 and invalidate the
TLB.
The stage 2 attributes have been added. To simplify setting these fields
two new functions are added to get the memory type and protection fields.
These are slightly different on stage 1 and stage 2 tables. We then use
them in pmap_enter to set the new level 3 entry to be stored.
The D-cache on all entries is cleaned to the point of coherency. This is
to allow the data to be visible to the VM. To allow for userspace to load
code when creating a new executable entry an invalid entry is created. When
the VM tried to use it the I-cache is invalidated. As the D-cache has
already been cleaned this will ensure the I-cache is synchronised with the
D-cache.
When the hardware implements a VPIPT I-cache we need to either have the
correct VMID set or invalidate it from EL2. As the host kernel will have
the wrong VMID set we need to call into EL2 to clean it. For this a second
function pointer is added that is called when this invalidation is needed.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D23875
With IFUNC support in the kernel, we can finally get rid of our poor-man's
ifunc for pmap, utilizing kobj. Since moea64 uses a second tier kobj as
well, for its own private methods, this adds a second pmap install function
(pmap_mmu_init()) to perform pmap 'post-install pre-bootstrap'
initialization, before the IFUNCs get initialized.
Reviewed by: bdragon
In this context, 0 actually means 0 (i.e. this is a li instruction).
While most assemblers will ignore this, I did have a compile failure at one
point when using an external toolchain.
In the future, we should use the li syntax to make this clearer.
Sponsored by: Tag1 Consulting, Inc.
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.
These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.
For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.
A man page for this driver will be forthcoming.
MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959
It is wrong to relate on __FreeBSD_version, either from
include/param.h, kernel, or libc, to check for rtld features.
Rtld might be from newer world than the running userspace.
Add special private symbols exported by rtld itself, to indicate the
changes in runtime behavior, and features that cannot be otherwise
detected or deduced at runtime.
Note that the symbols are not exported from libc, so they intentionally
cannot be linked against, and exported from the private namespace from rtld.
Consumers are required to use dlsym(3). For instance, for
_rtld_version_laddr_offset, user should do
ptr = dlsym(RTLD_DEFAULT, "_rtld_version_laddr_offset")
or even
ptr = dlvsym(RTLD_DEFAULT, "_rtld_version_laddr_offset",
"FBSDprivate_1.0");
Non-null ptr means that the change is present.
Also add _rtld_version__FreeBSD_version indicator to report the
headers version used at time of the rtld build.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24982
A recent kernel change caused the previously unused atomic_cmpset_masked() to
be used.
It had a typo in it.
Instead of reading the old value from an uninitialized variable, read it
from the passed-in pointer as intended.
This fixes crashes on 64 bit Book-E.
Obtained from: jhibbits
Driver version upgrade is connected with support for the new device
fetures, like Tx drops reporting or disabling meta caching.
Moreover, the driver configuration from the sysctl was reworked to
provide safer and better flow for configuring:
* number of IO queues (new feature),
* drbr size on Tx,
* Rx queue size.
Moreover, a lot of minor bug fixes and improvements were added.
Copyright date in the license of the modified files in this release was
updated to 2020.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
There is no guarantee from bus_dmamap_load_mbuf_sg() for matching
mbuf chain segments to dma physical segments.
This patch ensure correctly mapping to LLQ header and DMA segments.
Submitted by: Ido Segev <idose@amazon.com>
Obtained from: Amazon, Inc.
There is ena_free_all_io_rings_resources() called twice on device
detach:
ena_detach():
ena_destroy_device():
/* First call */
ena_free_all_io_rings_resources()
/* Second call */
ena_free_all_io_rings_resources()
The double-free causes panic() on kldunload, for example.
As the ena_destroy_device() is also called by ena_reset_task() it is
better to stay unchanged. Thus, remove the "Second call" of the function.
Submitted by: Maciej Bielski <mba@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Determined by a flag passed from the device. No metadata is set within
ena_tx_csum when caching is disabled.
Submitted by: Maciej Bielski <mba@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If requested size of IO queues is not supported try to decrease it until
finding the highest value that can be satisfied.
Submitted by: Maciej Bielski <mba@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
