MD_READONLY flag for the md device automatically instantiated during
kernel init for an mdroot filesystem.
Note that there is specifically and by design no tunable or sysctl
control over this feature. Without this option, you already have control
over whether the mdroot fs is writeable using vfs.root.mountfrom.options
from loader(8), the root_rw_mount rcvar, and by using "mount -u[rw] /"
or equivelent on the fly. This option is being added to provide a way
to make the mdroot fs truly immutable before userland code begins running.
Differential Revision: https://reviews.freebsd.org/D13411
Initial update to the ixgbe PF and VF drivers to support the iflib interface.
The PF driver version is bumped to 4.0.0, and the VF driver version is bumped to 2.0.0.
Special thanks to sbruno@ for the support in helping make this conversion happen.
Submitted by: Jeb Cramer <cramerj@intel.com>, Krzysztof Galazka (Chris) <krzysztof.galazka@intel.com>, Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: sbruno@, shurd@, #IntelNetworking
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>, Sergey Kozlov <kozlov.sergey.404@gmail.com>
Sponsored by: Limelight Networks, Intel Corporation
Differential Revision: https://reviews.freebsd.org/D11727
This will attempt to use a different thread/core on the same L2
cache when possible, or use the same cpu as the rx thread when not.
If SMP isn't enabled, don't go looking for cores to use. This is mostly
useful when using shared TX/RX queues.
Reviewed by: sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12446
r326987 enabled two #if 0'd-out EMLINK checks in zfs_link_create() for
link overflow. However, one of the checks (when the vnode adding a link
is a directory such as for mkdir) always returned even if the link did not
overflow. Change this to only return early if it needs to report an
EMLINK error.
Reported by: db, shurd
Sponsored by: Chelsio Communications
Set FUSE_LINK_MAX to UINT32_MAX instead of LINK_MAX to match the maximum
link count possible in the 'nlink' field of 'struct fuse_attr'.
Sponsored by: Chelsio Communications
On the one hand, FIFOs should respect other variables not supported by
the fifofs vnode operation (such as _PC_NAME_MAX, _PC_LINK_MAX, etc.).
These values are fs-specific and must come from a fs-specific method.
On the other hand, filesystems that support FIFOs are required to
support _PC_PIPE_BUF on directory vnodes that can contain FIFOs.
Given this latter requirement, once the fs-specific VOP_PATHCONF
method supports _PC_PIPE_BUF for directories, it is also suitable for
FIFOs permitting a single VOP_PATHCONF method to be used for both
FIFOs and non-FIFOs.
To that end, retire all of the FIFO-specific pathconf methods from
filesystems and change FIFO-specific vnode operation switches to use
the existing fs-specific VOP_PATHCONF method. For fifofs, set it's
VOP_PATHCONF to VOP_PANIC since it should no longer be used.
While here, move _PC_PIPE_BUF handling out of vop_stdpathconf() so that
only filesystems supporting FIFOs will report a value. In addition,
only report a valid _PC_PIPE_BUF for directories and FIFOs.
Discussed with: bde
Reviewed by: kib (part of a larger patch)
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D12572
Previously, it silently only supported auto, instead, log a message
indicating why only auto is supported.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D13358
It's possible to change the SFP module when link is down, which would
change the available media types. This is part of D13358.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
New Stratus bnxt devices require support for short HWRM commands for VFs
to function. Enable their use, but only use them if it's both supported
and required... prefer the long HWRM commands when possible.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D13269?id=36180
Add a new TMPFS_LINK_MAX to use in place of LINK_MAX for link overflow
checks and pathconf() reporting. Rather than storing a full 64-bit
link count, just use a plain int and use INT_MAX as TMPFS_LINK_MAX.
Discussed with: bde
Reviewed by: kib (part of a larger patch)
Sponsored by: Chelsio Communications
This uses NANDFS_LINK_MAX instead of LINK_MAX for link overflow checks
and the value reported by pathconf() / fpathconf().
Sponsored by: Chelsio Communications
Having all filesystems fall through to default values isn't always correct
and these values can vary for different filesystem implementations. Most
of these changes just use the existing default values with a few exceptions:
- Don't report CHOWN_RESTRICTED for ZFS since it doesn't do the exact
permissions check this claims for chown().
- Use NANDFS_NAME_LEN for NAME_MAX for nandfs.
- Don't report a LINK_MAX of 0 on smbfs. Now fail with EINVAL to
indicate hard links aren't supported.
Requested by: bde (though perhaps not this exact implementation)
Reviewed by: kib (earlier version)
MFC after: 1 month
Sponsored by: Chelsio Communications
The script originally supported embedding an mfs into ELF files or any
other type of file, because it searched for magic strings to mark the
beginning and end of the embeddable section. It was later modified to
read the section offset and length via readelf, which made it work for
ELF only. Restore the ability to update arbitrary file types by using
the readelf technique for ELF, and the magic string technique for all
others (including PE/COFF files like loader.efi).
Submitted by: Zakary Nafziger <worldofzak@gmail.com>
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12746
- Define a NFS_LINK_MAX as UINT32_MAX to match the wire protocol.
- Use NFS_LINK_MAX instead of LINK_MAX as the fallback value reported
for a PATHCONF RPC by the NFS server.
- Use NFS_LINK_MAX instead of LINK_MAX as the default value reported
by the NFS client pathconf() if not overridden by the NFS server.
- When reading the link count out of an RPC reply, read the full 32
bits instead of the lower 16 bits.
Reviewed by: rmacklem (earlier version)
Sponsored by: Chelsio Communications
This method handles _PC_FILESIZEBITS, _PC_SYMLINK_MAX, and _PC_NO_TRUNC.
For other values it defers to vop_stdpathconf().
MFC after: 1 month
Sponsored by: Chelsio Communications
- Define a ZFS_LINK_MAX as the ZFS version of LINK_MAX which is set to
UINT64_MAX to match the on-disk format.
- Enable the currently #if 0'd code to check for link overflows and
return EMLINK.
- Don't clamp the link count reported in stat() to LINK_MAX as that is
still the 16-bit limit, but report the full link counts. Also,
avoid possibly overflowing the reported link count to 0 when adjusting
the link count to account for ".snapshot".
- Update the LINK_MAX reported by pathconf() to report ZFS_LINK_MAX
rather than LINK_MAX (but clamped to LONG_MAX for 32-bit systems).
Reviewed by: avg (earlier version)
Sponsored by: Chelsio Communications
The method handles NAME_MAX and LINK_MAX explicitly. For all other
pathconf variables, the method passes the request down to the underlying
file descriptor. This requires splitting a kern_fpathconf() syscallsubr
routine out of sys_fpathconf(). Also, to avoid lock order reversals with
vnode locks, the fdescfs vnode is unlocked around the call to
kern_fpathconf(), but with the usecount of the vnode bumped.
MFC after: 1 month
Sponsored by: Chelsio Communications
The firmware is always in little endian, use htole*() for all request fields
larger than one byte.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Email address has changed, uses consistent name (Matthew, not Matt)
Reported by: Matthew Macy <mmacy@mattmacy.io>
Differential Revision: https://reviews.freebsd.org/D13537
gmirror does not perform any sorting of I/O requests, so the bioq API
doesn't provide any advantages over plain TAILQs. The API also does not
provide operations needed by an upcoming change.
No functional change intended. The diff shrinks the geom_mirror.ko
text and the gmirror softc slightly.
Tested by: pho (part of a larger patch)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Add atomic_load_<type> and atomic_store_<type>, and explain why they
exist.
Define the synchronizes-with relationship and its effects.
Reorder and revise some of the existing text. For example, more
precisely describe when ordinary accesses are atomic.
Reviewed by: jhb, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13522
the 32-bit cookie can be sign-extended on its way out of the loader and
through Open Firmware. If sign-extended, the in-kernel check of its value
would fail on 64-bit systems, resulting in a mountroot prompt. Solve this
by telling the kernel to ignore the high-order bits.
PR: kern/224437
Submitted by: Gustavo Romero
applied relocation offset in link_elf.c works as intended. We may want to
revisit how that works in future, for example by having elf_reloc_self()
actually store the numbers it is using rather than computing them later,
but this fixes symbol lookup after r326203.
Reported by: andreast@
Pointy hat to: me
The IA32 memory model guarantees that all writes are seen in the program
order. Also, any access to the uncacheable memory flushes the store
buffers. As the consequence, SFENCE instruction is (almost) never needed,
in particular, it is not needed to ensure the correct order of updates as
seen by a PCIe device.
Use atomic_thread_fence_rel() instead of wb() to only emit compiler barriers
on x86 there. Other architectures get the right barrier instruction as
well.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies
MFC after: 1 week
In this case volatile qualifiers enusre that a compiler does not
optimize the accesses out.
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13534
They provide relaxed-ordered atomic access semantic. Due to the
FreeBSD memory model, the operations are syntaxical wrappers around
the volatile accesses. The volatile qualifier is used to ensure that
the access not optimized out and in turn depends on the volatile
semantic as implemented by supported compilers.
The motivation for adding the operation is to help people coming from
other systems or knowing the C11/C++ standards where atomics have
special type and require use of the special access operations. It is
still the case that FreeBSD requires plain load and stores of aligned
integer types to be atomic.
Suggested by: jhb
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13534
changed worked to capture dumps for me. However, the test for
SCHEDULER_STOPPED() isn't right. We can also call the dump routine
from ddb, in which case the scheduler is still running. This leads to
an assertion panic that we're sleeping when we shouldn't. Instead, use
the proper test for dumping or not. This brings us in line with other
places that do special things while we're doing polled I/O like this.
Noticed by: pho@
Differential Revision: https://reviews.freebsd.org/D13531
removing this argument, and expanding when rc is NULL. This
effectively completes the back out of custom scripts for tftp booted
loaders from r269153 that was started in r292344 with the new path
tricks that obsoleted it.
Submitted by: Netflix
shell scripts in scripts don't need
to be chmod +x to work. In fact most are not.
Of the tests I found from a simple search:
65 are chmod +x
84 are chmod -x
simply disable the check for test shell scripts.
Recommit requested by: cem, rgrimes
By the ACPI standard (ACPI 5 chapter 8.4 Declaring Processors) Processors
can be implemented in 2 distinct ways:
* Through a Processor object type (which provides P_BLK)
* Through a Device object type
Prior to this change, the FreeBSD driver only supported the former. AMD
Epyc / Poweredge systems we are testing both implement the latter only. Add
the missing support.
Because P_BLK is not defined in the device object case, C-states entering
must be completely controlled via _CST methods rather than P_LVL2/3.
John Baldwin points out that ACPI 6.0 formally deprecates the Processor
keyword, so eventually processors will only be enumerated as Device objects.
Submitted by: attilio
Reviewed by: jhb, markj, Anton Rang <rang AT acm.org>
Relnotes: maybe
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13457
