Do not close/destroy opened consumer directly in case of disconnect. Instead
keep it existing until it will be closed in regular way in response to
upstream provider destruction. Delay geom destruction in the same way.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.
Do not close/destroy opened consumer directly in case of disconnect. Instead
keep it existing until it will be closed in regular way in response to
upstream provider destruction. Delay geom destruction in the same way.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.
r162200 delays provider orphanization until all running requests complete,
to workaround broken orphan() method implementation in some classes.
r215687 removes persistent periodic (10Hz) event thread wake ups.
Together these changes can indefinitely delay orphanization until some
other event wake up the event thread. One consequence of this is inability
of CAM to destroy device disconnected when busy and, as consequence, create
new one after reconnection.
While the best solution would be to revert r162200, it is not easy, as
some classes still look broken in that way. Instead conditionally wake up
event thread if there are some providers waiting for orphanization.
MFC after: 1 week
providers and consumers will be destroyed. Before take some actions
with a geom, check that it is not destroyed at the moment.
Tested by: nwhitehorn
MFC after: 1 week
start only one worker thread. For software crypto it will start by default
N worker threads where N is the number of available CPUs.
This is not optimal if hardware crypto is AES-NI, which uses CPU for AES
calculations.
Change that to always start one worker thread for every available CPU.
Number of worker threads per GELI provider can be easly reduced with
kern.geom.eli.threads sysctl/tunable and even for software crypto it
should be reduced when using more providers.
While here, when number of threads exceeds number of CPUs avilable don't
reduce this number, assume the user knows what he is doing.
Reported by: Yuri Karaban <dev@dev97.com>
MFC after: 3 days
- add support for volumes above 2TiB with Promise metadata format;
- enforse and document other limitations:
- Intel and Promise metadata formats do not support disks above 2TiB;
- NVIDIA metadata format does not support volumes above 2TiB.
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
with older FreeBSD versions:
- Add -V option to 'geli init' to specify version number. If no -V is given
the most recent version is used.
- If -V is given don't allow to use features not supported by this version.
- Print version in 'geli list' output.
- Update manual page and add table describing which GELI version is
supported by which FreeBSD version, so one can use it when preparing GELI
device for older FreeBSD version.
Inspired by: Garrett Cooper <yanegomi@gmail.com>
MFC after: 3 days
o Detect when Boot Camp is enabled (i.e. the MBR mirrors the GPT).
o When Boot Camp is enabled, update the MBR whenever we write the GPT.
o Creation of a Boot Camp enabled GPT is not supported.
o Automatically disable Boot Camp when the GPT has been changed so that
there's either no EFI partition or no HFS+ partition.
o The first 4 partitions (by index) get mirrored in the MBR.
Requested by, discussed with and tested by: kris@pcbsd.org
MFC after: 1 week
filesystems to be opened for writing. This functionality used to
be special-cased for just the root filesystem, but with this change
is now available for all UFS filesystems. This change is needed for
journaled soft updates recovery.
Discussed with: Jeff Roberson
This fixes the problem, when the secondary GPT header is not erased when
partition table destroyed. Move equal operations from g_part_gpt_create
and g_part_gpt_recover to the separate function g_gpt_set_defaults.
Reported by: dwhite
MFC after: 1 week
Remove message about non empty bootcode, we can not break something
while GEOM_PART_EBR_COMPAT is defined.
But without GEOM_PART_EBR_COMPAT any changes in EBR are allowed and we
can accidentally wipe the boot code. To do not break anything save
the first EBR chunk and keep it untouched each time when we are
changing EBR. Note that we are still not support boot code for EBR.
PR: kern/141235
MFC after: 1 month
disk drive. The boot0cfg(8) utility preserves these 4 bytes when is
writing bootcode to keep a multiboot ability.
Change gpart's bootcode method to keep DSN if it is not zero. Also
do not allow writing bootcode with size not equal to MBRSIZE.
PR: kern/157819
Tested by: Eir Nym
MFC after: 1 month
Since the only parameter that we check is size of bootcode, then
allow only two sizes: size of boot1 and size of /boot/boot.
This partially protects users from losing ability to boot if incorrect
bootcode is specified.
Requested by: ru
DEVFS, and make it accessible via the diskinfo utility.
Extend GEOM's generic attribute query mechanism into generic disk consumers.
sys/geom/geom_disk.c:
sys/geom/geom_disk.h:
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
- Allow disk providers to implement a new method which can override
the default BIO_GETATTR response, d_getattr(struct bio *). This
function returns -1 if not handled, otherwise it returns 0 or an
errno to be passed to g_io_deliver().
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
- Don't copy the serial number to dp->d_ident anymore, as the CAM XPT
is now responsible for returning this information via
d_getattr()->(a)dagetattr()->xpt_getatr().
sys/geom/geom_dev.c:
- Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM
attribute "GEOM::physpath", if possible. If the attribute request
returns a zero-length string, ENOENT is returned.
usr.sbin/diskinfo/diskinfo.c:
- If the DIOCGPHYSPATH ioctl is successful, report physical path
data when diskinfo is executed with the '-v' option.
Submitted by: will
Reviewed by: gibbs
Sponsored by: Spectra Logic Corporation
Add generic attribute change notification support to GEOM.
sys/sys/geom/geom.h:
Add a new attrchanged method field to both g_class
and g_geom.
sys/sys/geom/geom.h:
sys/geom/geom_event.c:
- Provide the g_attr_changed() function that providers
can use to advertise attribute changes.
- Perform delivery of attribute change notifications
from a thread context via the standard GEOM event
mechanism.
sys/geom/geom_subr.c:
Inherit the attrchanged method from class to geom (class instance).
sys/geom/geom_disk.c:
Provide disk_attr_changed() to provide g_attr_changed() access
to consumers of the disk API.
sys/cam/scsi/scsi_pass.c:
sys/cam/scsi/scsi_da.c:
sys/geom/geom_dev.c:
sys/geom/geom_disk.c:
Use attribute changed events to track updates to physical path
information.
sys/cam/scsi/scsi_da.c:
Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
events for this driver. When this event occurs, and
the updated buffer type references our physical path
attribute, emit a GEOM attribute changed event via the
disk_attr_changed() API.
sys/cam/scsi/scsi_pass.c:
Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
events for this driver. When this event occurs, update
the physical patch devfs alias for this pass instance.
Submitted by: gibbs
Sponsored by: Spectra Logic Corporation
They are media-dependent and may change in run-time, same as sectorsize
and/or mediasize.
SCSI devices return physical sector size and offset via READ CAPACITY(16)
command and so can not report it until media inserted or at least until
probe sequence completed. UNMAP support is also reported there.
geometry and partitions may start from withing the first track.
If we found such partitions, then do not reserve space of the
first track, only first sector.
partition tables and lost an ability to boot after r221788.
Also unhide an error message from bootverbose, this would help to
easier determine the problem.
probed and read successfull, but it contains invalid values (e.g.
overlapped partitions, offset or size is out of bounds), then table
will be rejected.
MFC after: 1 month
