Commit Graph

158734 Commits

Author SHA1 Message Date
pjd
78cb45a022 Correct typo in comment. 2009-09-06 07:30:21 +00:00
pjd
ce8377f813 Correct comment. 2009-09-06 07:29:22 +00:00
pjd
e62171fc99 Synchornize description in manual page with strerror() output. 2009-09-06 07:22:09 +00:00
pjd
e816f77286 Add support for changing providers priority.
Submitted by:	Mel Flynn
2009-09-06 06:52:06 +00:00
pjd
4a0af0108a Update copyright years. 2009-09-06 06:49:59 +00:00
pjd
e091741877 For any given subcommand allow to specify multi-line usage (separated by \n).
Submitted by:	Mel Flynn
2009-09-06 06:48:50 +00:00
qingli
5b9cf14b54 The addresses that are assigned to the loopback interface
should be part of the kernel routing table.

Reviewed by:	bz
MFC after:	immediately
2009-09-05 20:24:37 +00:00
bz
fb643392b2 In the NEXTADDR macro use SA_SIZE() rather than directly using
sizeof(), as introduced in r186119, for advancing the current
position into the buffer.
See comment in net/route.h for a description of the difference.
This makes ndp -s work again.

Reviewed by:	qingli
X-MFC after:	now
2009-09-05 16:51:51 +00:00
qingli
831e6c957c This patch fixes an address scope violation. Considering the
scenario where an anycast address is assigned on one interface,
and a global address with the same scope is assigned on another
interface. In other words, the interface owns the anycast
address has only the link-local address as one other address.
Without this patch, "ping6" the anycast address from another
station will observe the source address of the returned ICMP6
echo reply has the link-local address, not the global address
that exists on the other interface in the same node.

Reviewed by:	bz
MFC after:	immediately
2009-09-05 16:50:55 +00:00
qingli
0cca60c70d This patch fixes the following issues:
- Interface link-local address is not reachable within the
  node that owns the interface, this is due to the mismatch
  in address scope as the result of the installed interface
  address loopback route. Therefore for each interface
  address loopback route, the rt_gateway field (of AF_LINK
  type) will be used to track which interface a given
  address belongs to. This will aid the address source to
  use the proper interface for address scope/zone validation.
- The loopback address is not reachable. The root cause is
  the same as the above.
- Empty nd6 entries are created for the IPv6 loopback addresses
  only for validation reason. Doing so will eliminate as much
  of the special case (loopback addresses) handling code
  as possible, however, these empty nd6 entries should not
  be returned to the userland applications such as the
  "ndp" command.
Since both of the above issues contain common files, these
files are committed together.

Reviewed by:	bz
MFC after:	immediately
2009-09-05 16:43:16 +00:00
trasz
36333bfcba Improve wording.
Discussed with:	pjd, cperciva, rink, wkoszek and des, in order of appearance.
2009-09-05 15:08:58 +00:00
kib
167fe991d6 Handle zero size for posix_memalign. Return NULL or unique address
according to the 'V' option.

PR:	standards/138307
MFC after:	1 week
2009-09-05 13:32:05 +00:00
imp
b620cd133b These checks against BUSY aren't needed: the newbus layer does this
already with the appropriate locks held...  There's no need to do it
here, so just delete the checks.
2009-09-05 08:38:25 +00:00
imp
6caec3bcfe Go ahead and mention the CVS branch name as well as the svn branch name. 2009-09-05 08:09:35 +00:00
imp
d7b297b969 Note migration of tunable from hw.bus.devctl_disable to
hw.bus.devctl_queue.  The sysctl interface provides legacys upport for
the latter sysctl, but the tunable support was removed.

MFC after:	1 day
2009-09-05 08:08:14 +00:00
jfv
65def14c86 If an interface is brought up with no cable it will experience
watchdog resets, this is due to a missing check for link in the
new multiqueue start code.

MFC: 3 days
2009-09-04 22:45:07 +00:00
sam
4975956f2e must also plumb static wep keys to the local sta db in sta mode; not
sure when this became necessary and might be caused by some missing
code to do auto-configuration of DWDS usage

Noticed by:	Felix Feng <unixwind@gmail.com>
2009-09-04 22:34:57 +00:00
trasz
df693f271c Add NFSv4 ACL support to mv(1).
Reviewed by:	rwatson
2009-09-04 21:49:37 +00:00
jhb
81de4d9abd Fill the reverse RSS map with 0xff's so that the subsequent loop to
calculate the values will work properly.

Reviewed by:	np
MFC after:	1 month
2009-09-04 21:00:45 +00:00
trasz
825ace402b Add NFSv4 ACL support to find(1).
Reviewed by:	rwatson
2009-09-04 20:01:16 +00:00
mav
ff8e63fcdf Remove artificial MAX_IO_SIZE constant, equal to DFLTPHYS * 2. Use MAXPHYS
instead. It is NULL change for GENERIC kernel, but allows 'fast' mode to
work on systems with increased MAXPHYS.
2009-09-04 19:20:46 +00:00
jamie
319f7fbbc6 Allow a jail's name to be the same as its jid (which is the default if no
name is specified), but still disallow other numeric names.

Reviewed by:	zec
Approved by:	bz (mentor)
MFC after:	3 days
2009-09-04 19:00:48 +00:00
kmacy
3b3dc09e7a remove stale references to RTF_CLONING and RTF_LLINFO
MFC after:	3 days
2009-09-04 18:52:26 +00:00
mav
0c14213e1e Add to camcontrol cmd support for sending arbitrary ATA commands.
It could be used for broad range of tasks, such as configuring drive
power management modes, caching, security and any other features and tasks,
not supported by existing drivers.
2009-09-04 18:21:40 +00:00
kib
942ebf5dc6 Add missing ';'. 2009-09-04 14:53:12 +00:00
trasz
7456ddb038 Add NFSv4 ACL support to getfacl(1).
Reviewed by:	rwatson
2009-09-04 10:22:29 +00:00
trasz
5ee8242d81 Make umass(4) pass device USB serial number to CAM, making it possible
to e.g. retrieve it using camcontrol(8).

Reviewed by:	scottl, hps (earlier version)
Obtained from:	Wheel Sp. z o.o. (http://www.wheel.pl)
2009-09-04 09:57:03 +00:00
pjd
6552caebd3 If crypto operation is finished with EAGAIN, don't repeat operation from
the return context, but from the original context.
Before repeating operation clear DONE flag and error.

Reviewed by:	sam
Obtained from:	Wheel Sp. z o.o. (http://www.wheel.pl)
2009-09-04 09:48:18 +00:00
pjd
81e539fed7 Make serial numbers of daX disks visible by GEOM.
No objections from:	scottl
Obtained from:		Wheel Sp. z o.o. (http://www.wheel.pl)
2009-09-04 09:40:59 +00:00
pjd
39353b796a Simplify g_disk_ident_adjust() function and allow any printable character
in serial number.

Discussed with:	trasz
Obtained from:	Wheel Sp. z o.o. (http://www.wheel.pl)
2009-09-04 09:39:06 +00:00
pjd
e49c4b7112 Remove 'ad:' prefix from disk serial number. We don't want serial number
to change when we reconnect the disk in a way that it is accessible through
CAM for example.

Discussed with:	trasz
2009-09-04 09:33:50 +00:00
des
b1eaddb48f Let the armchair generals handle this one. 2009-09-04 07:44:58 +00:00
ache
46887be63e Remove single occurance of HAS_CTYPE ifdef, ctype functions
used here for a long time and needs their header in anycase.
2009-09-04 07:44:27 +00:00
ache
fe4cbf528e 1) Remove single occurance of HAS_CTYPE ifdef, ctype functions
used here for a long time and needs their header in anycase.
2) Add (unsigned char) casts to more ctype macros.
3) Simplify menu input handling using ctype instead of range unguarded
hardcoded tricks.
2009-09-04 07:42:13 +00:00
julian
48d3390a19 whitespace commit
Submitted by:	bde@
2009-09-04 07:29:24 +00:00
ache
af07561a1f Add lv_LV
PR:             105100
Submitted by:   Aldis Berjoza <killasmurf86@gmail.com>
2009-09-04 06:26:40 +00:00
ache
a67bf071db Add lv_LV
PR:             105100
Submitted by:   Aldis Berjoza <killasmurf86@gmail.com>
2009-09-04 06:19:37 +00:00
ache
9d3cad54e0 Add lv_LV
PR:             105100
Submitted by:   Aldis Berjoza <killasmurf86@gmail.com>
2009-09-04 05:54:45 +00:00
julian
5ae8d08f60 Bring i386 up to date with amd64 and others.
The macros for PCPU can be slightly simplified, which makes the
resulting tangle qa lot easier to understand when trying to read them.

MFC after:	4 weeks
2009-09-04 05:40:06 +00:00
weongyo
29700115d8 fix a TX issue on big endian machines like powerpc or sparc64. Now
zyd(4) should work on all architectures.

Obtained from:	OpenBSD
2009-09-04 05:28:09 +00:00
pjd
b0ecf3a925 Don't bother obtaining the ident if we are not going to print it. 2009-09-03 22:19:09 +00:00
jfv
45a57a7a4a Stupid cut and paste error on a stats struct member, thanks
to Ryan at Small Tree for finding this one.
2009-09-03 22:00:42 +00:00
gnn
60eb51e7a3 Add ARP statistics to the kernel and netstat.
New counters now exist for:
requests sent
replies sent
requests received
replies received
packets received
total packets dropped due to no ARP entry
entrys timed out
Duplicate IPs seen

The new statistics are seen in the netstat command
when it is given the -s command line switch.

MFC after:	2 weeks
In collaboration with: bz
2009-09-03 21:10:57 +00:00
mav
5d151fa1f9 Round maxio for ATI SB600 to 64K.
Submitted by:	scottl@
2009-09-03 19:02:17 +00:00
ache
fce8a646ce Add lv_LV 2009-09-03 17:37:23 +00:00
imp
aa3a231576 Actually, stable/8 is what was created... 2009-09-03 17:13:54 +00:00
ache
5ff2e4de9c Add lv_LV, move lt_LT to common part 2009-09-03 17:12:45 +00:00
imp
2ba0fea9a7 Time for house-cleaning:
o remove all entries before RELENG_7 was branched, as is tradition[*].
o Update examples...  nobody cares about 5.x upgrades.
o minor format tweaking in a few places.
o update copyright (although at best I hold an editors copyright these days).
o Remove giving people permission to buy me beer.  I don't do enough for
  this document for that anymore...
2009-09-03 17:04:42 +00:00
ache
5476e08be1 Add lv_LV, move lt_LT to common part 2009-09-03 16:53:11 +00:00
remko
dcd2780b1c Do the first step in removing lukemftpd from the base system. Disconnect
it from the build.

If you are using the FTP daemon, please consider using the port ftp/tnftpd
which is the same FTP server, but newer and might have more/better
functionality.

This results in us providing only one ftp daemon by default.

Reviewed by:	bz
Approved by:	imp (mentor, implicit)
MFC after:	3 days
Silence from:	obrien
2009-09-03 16:34:20 +00:00