There's problems with them. The order of efi stuff isn't quite right,
and there's various problems. Revert until thos problems can be fixed.
Reviewed by: kevans@
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
pf ioctls frequently take a variable number of elements as argument. This can
potentially allow users to request very large allocations. These will fail,
but even a failing M_NOWAIT might tie up resources and result in concurrent
M_WAITOK allocations entering vm_wait and inducing reclamation of caches.
Limit these ioctls to what should be a reasonable value, but allow users to
tune it should they need to.
Differential Revision: https://reviews.freebsd.org/D15018
Now that 10 years have passed since the original limit of 10000 was
committed, bump it a little bit.
Spinning waiting for writers is semi-informed in the sense that we always
know if the owner is running and base the decision to spin on that.
However, no such information is provided for read-locking. In particular
this means that it is possible for a write-spinner to completely waste cpu
time waiting for the lock to be released, while the reader holding it was
preempted and is now waiting for the spinner to go off cpu.
Nonetheless, in majority of cases it is an improvement to spin instead of
instantly giving up and going to sleep.
The current approach is pretty simple: snatch the number of current readers
and performs that many pauses before checking again. The total number of
pauses to execute is limited to 10k. If the lock is still not free by
that time, go to sleep.
Given the previously noted problem of not knowing whether spinning makes
any sense to begin with the new limit has to remain rather conservative.
But at the very least it should also be related to the machine. Waiting
for writers uses parameters selected based on the number of activated
hardware threads. The upper limit of pause instructions to be executed
in-between re-reads of the lock is typically 16384 or 32678. It was
selected as the limit of total spins. The lower bound is set to
already present 10000 as to not change it for smaller machines.
Bumping the limit reduces system time by few % during benchmarks like
buildworld, buildkernel and others. Tested on 2 and 4 socket machines
(Broadwell, Skylake).
Figuring out how to make a more informed decision while not pessimizing
the fast path is left as an exercise for the reader.
Add a -R option to setfacl to operate recursively on directories, along
with the accompanying flags -H, -L, and -P (whose behaviour mimics
chmod).
A patch was submitted with PR 155163, but this is a new implementation
based on comments raised in the Phabricator review for that patch
(review D9096).
PR: 155163
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Reviewed by: jilles
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14934
Sometimes the values contain geli passphrases being communicated from
loader(8) to the kernel, and some day the compiler may decide to start
eliding calls to memset() for a pointer which is not dereferenced again
before being passed to free().
Most other architectures already re-enter KDB on faults, powerpc and mips
are the only outliers. Correct this for powerpc, so that now bad addresses
can be handled gracefully instead of panicking.
Switch to standard FDT-base driver behavior and don't attach
if node "status" property value nn DTS is not set to "okay"
On RPi PWM by default is disabled, to enable it pwm.dtbo
from official repo[1] should be copied to overlays directory
on SD card FAT partition and "dtoverlay=pwm" line added to
config.txt. For more details see pwm overlay documentation[2]
sysutils/rpi-firmware port now includes overlays, so they
can be installed as a part of release image build.
[1] https://github.com/raspberrypi/firmware/tree/master/boot
[2] https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README
No objections from: phk@
This makes it easier to identify the individual partition types and
facilitates comparisons across architectures.
Reviewed by: gjb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
To avoid blocking on the context lock in the swi thread and risk potential
deadlocks, this change protects lighter weight updates that only need to
be consistent with each other with their own lock.
Submitted by: Matthew Macy <mmacy@mattmacy.io>
Reviewed by: shurd
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14967
This allows NIC drivers to sleep on polling config operations.
Submitted by: Matthew Macy <mmacy@mattmacy.io>
Reviewed by: shurd
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14982
GEOM ELI may double ask the password during boot. Once at loader time, and
once at init time.
This happens due a module loading bug. By default GEOM ELI caches the
password in the kernel, but without the MODULE_VERSION annotation, the
kernel loads over the kernel module, even if the GEOM ELI was compiled into
the kernel. In this case, the newly loaded module
purges/invalidates/overwrites the GEOM ELI's password cache, which causes
the double asking.
MFC Note: There's a pc98 component to the original submission that is
omitted here due to pc98 removal in head. This part will need to be revived
upon MFC.
Reviewed by: imp
Submitted by: op
Obtained from: opBSD
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14992
CAM_SEL_TIMEOUT was introduced in
https://reviews.freebsd.org/D7521 (r304251), which claimed:
"VM shall response to CAM layer with CAM_SEL_TIMEOUT to filter those
invalid LUNs. Never use CAM_DEV_NOT_THERE which will block LUN scan
for LUN number higher than 7."
But it turns out this is not correct:
I think what really filters the invalid LUNs in r304251 is that:
before r304251, we could set the CAM_REQ_CMP without checking
vm_srb->srb_status at all:
ccb->ccb_h.status |= CAM_REQ_CMP.
r304251 checks vm_srb->srb_status and sets ccb->ccb_h.status properly,
so the invalid LUNs are filtered.
I changed my code version to r304251 but replaced the CAM_SEL_TIMEOUT
with CAM_DEV_NOT_THERE, and I confirmed the invalid LUNs can also be
filtered, and I successfully hot-added and hot-removed 8 disks to/from
the VM without any issue.
CAM_SEL_TIMEOUT has an unwanted side effect -- see cam_periph_error():
For a selection timeout, we consider all of the LUNs on
the target to be gone. If the status is CAM_DEV_NOT_THERE,
then we only get rid of the device(s) specified by the
path in the original CCB.
This means: for a VM with a valid LUN on 3:0:0:0, when the VM inquires
3:0:0:1 and the host reports 3:0:0:1 doesn't exist and storvsc returns
CAM_SEL_TIMEOUT to the CAM layer, CAM will detech 3:0:0:0 as well: this
is the bug I reported recently:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=226583
PR: 226583
Reviewed by: mav
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D14690
have moved from the u-boot-rpi3 share directory to the default
rpi-firmware share directory. Remove the files from UBOOT_FILES
and append the DTB file to a DTB_FILES list so the correct path
is used, fixing a build failure.
Sponsored by: The FreeBSD Foundation
Make int_external_input, int_decrementer, and int_performance_counter all
now use trap_common, just like on AIM. The effects of this are:
* All traps are now properly displayed in ddb. Previously traps from
external input, decrementer, and performance counters, would display as
just basic stack traces. Now the frame is displayed.
* External interrupts are now handled with interrupts enabled, so handling
can be preempted. This seems to fix a hang found post-r329882.
Export additional information which may be helpful to userspace
consumers and rename the sysctl to net.inet.tcp.function_info.
Sponsored by: Netflix, Inc.
Provide long options --bytes and --lines to match -c and -n respectively.
This improves head(1)'s compatibility with its GNU counterpart in a sensible
way.
Reviewed by: eadler (previous version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D14139
Add --blocks, --bytes, and --lines long options for -b, -c, and -n
respectively. This improves tail(1)'s compatibility with its GNU counterpart
in a straightforward way.
Reviewed by: eadler (earlier version)
MFC after: 3 days
Page daemon output is now regulated by a PID controller with a setpoint
of v_free_target. Moreover, the page daemon now wakes up regularly
rather than waiting for a wakeup from another thread. This means that
the free page count is unlikely to drop below the old
zfs_arc_free_target value, and as a result the ARC was not readily
freeing pages under memory pressure. Address the immediate problem by
updating zfs_arc_free_target to match the page daemon's new behaviour.
Reported and tested by: truckman
Discussed with: jeff
X-MFC with: r329882
Differential Revision: https://reviews.freebsd.org/D14994
This helps catch cases where an instrumented function is called while
in probe context.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
MFC after: 2 weeks
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D14863
Now, as all platform code and drivers support Linux
DT binding, safely remove deprecated sources and rely
on sys/gnu/dts from now on.
Obtained from: Semihalf
Sponsored by: Stormshield
This will allow us to verify if passphrase and key is valid without
decrypting whole device.
Reviewed by: cem@, allanjude@
Differential Revision: https://reviews.freebsd.org/D15000
Do not build or install pf tests if WITHOUT_PF is set. This fixes the build
failure with WITHOUT_PF=yes.
Reported by: Vladimir Zakharov <zakharov.vv@gmail.com>
Some devices cannot rely on the switch MDIO address passed in the DTB
for specifying single/multi-chip addressing mode. Introduce new property
"single-chip-addressing" which added to DTS will force single-chip mode.
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14800
Linux device tree binding, whose usage is obligatory,
comprises faulty representation of Marvell cryptographic
engine (CESA) - two engines are artificially gathered into
single DT node, in order to avoid certain SW limitation.
This patch improves the cesa driver to support above binding,
depending on compatible string, which helps to ensure
backward compatibility.
Submitted by: Patryk Duda
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14760
The code now has a single, consistant flow for all three ioctl
variants. ifdefs and for pre-FreeBSD-7 compatability are moved to
functions and macros. So the flow is alwasy the same, we impose
the cost of allocating, copying to, updating from, and freeing a
copy of struct pci_conf_io on all paths.
This change will allow PCIOCGETCONF32 support currently in
sys/compat/freebsd32/freebsd32_ioctl.c to be moved here.
Reviewed by: kib, jhb
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14978
Change OF_getencprop_alloc semantics to be combination of malloc and
OF_getencprop and return size of the property, not number of elements
allocated.
For the use cases where number of elements is preferred introduce
OF_getencprop_alloc_multi helper function that copies semantics
of OF_getencprop_alloc prior to this change.
This is to make OF_getencprop_alloc and OF_getencprop_alloc_multi
function signatures consistent with OF_getencprop_alloc and
OF_getencprop_alloc_multi.
Functionality-wise this patch is mostly rename of OF_getencprop_alloc
to OF_getencprop_alloc_multi except two calls in ofw_bus_setup_iinfo
where 1 was used as a block size.
It's had a good life, but it's not really configurable and not really used.
Obtained from: opBSD (with some changes)
Differential Revision: https://reviews.freebsd.org/D14991
