This change removes TRAP_INTERRUPT and TRAP_TIMERINT frame types.
Their names are a bit confusing: trap + interrupt, what is that?
The TRAP_TIMERINT name is too specific -- can it only be used for timer
"trap-interrupts"? What is so special about them?
My understanding of the code is that INTERRUPT, TRAP_INTERRUPT and
TRAP_TIMERINT differ only in how an offset from callee's frame pointer to a
trap frame on the stack is calculated. And that depends on a number of
arguments that a special handler passes to a callee (a function with a
normal C calling convention).
So, this change makes that logic explicit and collapses all interrupt frame
types into the INTERRUPT type.
Reviewed by: markj
Discussed with: kib, jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22303
[libc++] Harden usage of static_assert against C++03
In C++03, we emulate static_assert with a macro, and we must
parenthesize multiple arguments.
llvm-svn: 373328
This is a follow-up to r354460, which causes errors for pre-C++11
programs using <cmath>, similar to:
/usr/include/c++/v1/cmath:622:68: error: too many arguments provided to
function-like macro invocation
Reported by: antoine
MFC after: immediately (because of ports breakage)
If cu reads an EOF on the input side, it goes into a tight loop
sending a garbage byte to the remote. With this change, it exits
gracefully, along with its child.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
For the PROBEWP and PROBERC* states, add assertiosn that both the da device
state is in the right state, as well as the ccb state is the right one when we
enter dadone_probe{wp,rc}. This will ensure that we don't sneak through when
we're re-probing the size and write protection status of the device and thereby
leak a reference which can later lead to an invalidated peripheral going away
before all references are released (and resulting panic).
Reviewed by: scottl, ken
Differential Revision: https://reviews.freebsd.org/D22295
There are contexts where releasing the ccb triggers dastart() to be run
inline. When da was written, there was always a deferral, so it didn't matter
much. Now, with direct dispatch, we can call dastart from the dadone*
routines. If the probe state isn't updated, then dastart will redo things with
stale information. This normally isn't a problem, because we run the probe state
machine once at boot... Except that we also run it for each open of the device,
which means we can have multiple threads racing each other to try to kick off
the probe. However, if we update the state before we release the CCB, we can
avoid the race. While it's needed only for the probewp and proberc* states, do
it everywhere because it won't hurt the other places.
The race here happens because we reprobe dozens of times on boot when drives
have lots of partitions. We should consider caching this info for 1-2 seconds
to avoid this thundering hurd.
Reviewed by: scottl, ken
Differential Revision: https://reviews.freebsd.org/D22295
Besides the confusing name, this type is effectively unused.
In all cases where it could be set, the INTERRUPT type is set by the
earlier code. The conditions for TRAP_INTERRUPT are a subset of the
conditions for INTERRUPT.
Reviewed by: kib, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22305
exploits the sparsity of allocated blocks in a range, without
issuing an "are you there?" query for every block in the range.
swap_pager_copy() is not so smart. Modify the implementation
of swap_pager_meta_free() slightly so that swap_pager_copy()
can use that smarter implementation too.
Based on an observation of: Yoshihiro Ota (ota_j.email.ne.jp)
Reviewed by: kib,alc
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22280
to the PCB hash. The function doesn't modify the hash. It always
asserted write lock historically, but with epoch conversion this
fails in some special cases.
Reviewed by: rwatson, bz
Reported-by: syzbot+0b0488ca537e20cb2429@syzkaller.appspotmail.com
When reporting a process' stats, we can't just provide the tty as an
unsigned long, as if we have no controlling tty, the tty would be NODEV, or
-1. Instaed, just special-case NODEV.
Submitted by: Juraj Lutter <otis@sk.FreeBSD.org>
MFC after: 1 week
Don't depend on CPUTYPE to define powerpcspe CFLAGS, they should be set
unconditionally. This reduces duplication. Also, set some CFLAGS as
gcc-only, because clang's SPE support always uses the SPE ABI, it's not an
optional feature.
This saves some memory, around 256K I think. It removes some code,
e.g. KPTI does not need to specially map common_tss anymore. Also,
common_tss become domain-local.
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D22231
The r354367 is reverted since it is subsumed by this, more complete, approach.
Suggested by: markj
Reviewed by: alc. glebius, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D22242
There is no reason why the pmap_invalidate_all() in pmap_remove_pages()
must be performed before the final PV list lock release. Move it past
the lock release.
Eliminate a stale comment from pmap_page_test_mappings(). We implemented
a modified bit in r350004.
MFC after: 1 week
According to the OPAL documentation, only the POWER8 (PHB3) should use
the register write TCE reset method. All others should use the OPAL
call.
On POWER9 the call is semantically identical to the register write, with
a wait for completion.
Previously ntb_transport(4) required at least 6 scratchpad registers,
plus 2 more for each additional memory window. That is too much for some
configurations, where several drivers have to share resources of the same
NTB hardware. This patch introduces new compact version of the protocol,
requiring only 3 scratchpad registers, plus one more for each additional
memory window. The optimization is based on fact that neither of version,
number of windows or number of queue pairs really need more then one byte
each, and window sizes of 4GB are not very useful now. The new protocol
is activated automatically when the configuration is low on scratchpad
registers, or it can be activated explicitly with loader tunable.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Address Lookup Table (A-LUT) being enabled allows to specify separate
translation for each 1/128th or 1/256th of the BAR2. Previously it was
used only to limit effective window size by blocking access through some
of A-LUT elements. This change allows A-LUT elements to also point
different memory locations, providing to upper layers several (up to 128)
independent memory windows. A-LUT hardware allows even more flexible
configurations than this, but NTB KPI have no way to manage that now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This is an exceptional case; generally found during controller errors.
A panic when we attempt to acess slot->curcmd->data is less ideal than
warning, and other verbiage will be emitted to indicate the exact error.
The current linux man page and testing done on a fairly recent linux5.n
kernel have identified two changes to the semantics of the linux
copy_file_range system call.
Since the copy_file_range(2) system call is intended to be linux compatible
and is only currently in head/current and not used by any commands,
it seems appropriate to update the system call to be compatible with
the current linux one.
The first of these semantic changes was changed to be compatible with
linux5.n by r354564.
For the second semantic change, the old linux man page stated that, if
infd and outfd referred to the same file, EBADF should be returned.
Now, the semantics is to allow infd and outfd to refer to the same file
so long as the byte ranges defined by the input file offset, output file offset
and len does not overlap. If the byte ranges do overlap, EINVAL should be
returned.
This patch modifies copy_file_range(2) to be linux5.n compatible for this
semantic change.
via 'diskinfo -v'. This avoids the need to track it down via CAM,
and should also work for disks that don't use CAM. And since it's
inherited thru the GEOM hierarchy, in most cases one doesn't need
to walk the GEOM graph either, eg you can use it on a partition
instead of disk itself.
Reviewed by: allanjude, imp
Sponsored by: Klara Inc
Differential Revision: https://reviews.freebsd.org/D22249
consistency checking slows performance dramatically. This change
reduces the number of assertions checked by completely walking the
vm_map tree only when the write-lock is released, and only then if the
number of modifications to the tree since the last walk exceeds the
number of tree nodes.
Reviewed by: alc, kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22163
The current linux man page and testing done on a fairly recent linux5.n
kernel have identified two changes to the semantics of the linux
copy_file_range system call.
Since the copy_file_range(2) system call is intended to be linux compatible
and is only currently in head/current and not used by any commands,
it seems appropriate to update the system call to be compatible with
the current linux one.
The old linux man page stated that, if the
offset + len exceeded file_size for the input file, EINVAL should be returned.
Now, the semantics is to copy up to at most file_size bytes and return that
number of bytes copied. If the offset is at or beyond file_size, a return
of 0 bytes is done.
This patch modifies copy_file_range(2) to be linux compatible for this
semantic change.
A separate patch will change copy_file_range(2) for the other semantic
change, which allows the infd and outfd to refer to the same file, so
long as the byte ranges do not overlap.
This was once set, but I removed it by the time I committed it because both
configurations use the same POWER_ID. This can be separated back out if the
situation changes.
DMA is currently disabled while I work out why it's broken, but this is
enough for upstream U-Boot + rpi-firmware + our rpi3-psci-monitor to boot
with the right config.
The RPi 4 is still not in a good "supported" state, as we have no
USB/PCI-E/Ethernet drivers, but if air-gapped pies only able to operate over
cereal is your thing, here's your guy.
Submitted by: Robert Crowston (with modifications)
In the EFI implementation in U-Boot no ConOut efi variable is created,
this cause loader to fallback to TERM_EMU implementation which is very
very very slow (and uses the ConOut device in the system table anyway).
The UEFI spec aren't clear as if this variable needs to exists or not.
Reviewed by: imp, kevans
- add support for log2 based dividers
- use proper write mask when writing to divider register
MFC after: 3 weeks
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D22283
