Commit Graph

238 Commits

Author SHA1 Message Date
David Greenman
e34ff1781d * Revision 2.3 93/09/29 15:10:16 davidg
* credit Charles Hannum
1993-09-29 22:15:53 +00:00
David Greenman
9699168bba * Revision 2.2 93/09/29 13:23:25 davidg
* added no multi-buffer override for 3c503
 *
 * Revision 2.1  93/09/29  12:32:12  davidg
 * changed multi-buffer count for 16bit 3c503's from 5 to 2 after
 * noticing that the transmitter becomes idle because of so many
 * packets to load.
 *
 * Revision 2.0  93/09/29  00:00:19  davidg
 * many changes, rewrites, additions, etc. Now supports the
 * NE1000, NE2000, WD8003, WD8013, 3C503, 16bit 3C503, and
 * a variety of similar clones. 16bit 3c503 now does multi
 * transmit buffers. Nearly every part of the driver has
 * changed in some way since rev 1.30.
1993-09-29 20:30:26 +00:00
Jordan K. Hubbard
0e583a0138 From: "Andrew A. Chernov, Black Mage" <ache@astral.msk.su>
AltGr Lock code for zero repeat count ommited, so AltGr Lock
works only one time and never again :-)
1993-09-29 00:42:10 +00:00
Jordan K. Hubbard
b5275b8103 Version number support for XFree86 1993-09-28 20:53:48 +00:00
Jordan K. Hubbard
fae56ff15f Change to sio for recognising the last serial port on a multiport
card correctly.

Updated syscons to 0.2e, added features for upcoming XFree86 2.0,
fixed crashbug.
1993-09-28 00:01:18 +00:00
David Greenman
ee0ccf358a * Revision 1.30 93/09/24 18:43:31 davidg
* fix bug where Compex boards ident themselves as 8003E's and the
 * 16bit override wasn't working
1993-09-25 01:50:15 +00:00
Rodney W. Grimes
92ed385a09 >From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 01:35:10 +1000
Julian writes:

>In fact DEVIDLE and FINDWORK ended up being basically equivalent.
>the bit I wonder about, is the returning of 0.. What (other than
>another request from somewhere else in the kernel) is going to start
>work on the next item on the queue?

I think removing FINDWORK would make things clearer.

Nothing much is going to start work on the next item.  However, it is
pointless to continue processing the queue for the same unready drive.
Aborting all reads and trying harder to perform all writes would be
better.
Julian writes.

> no, actually it should be:
> fdt = fd_data[FDUNIT(minor(dev))].ft;

Fixed.
From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 22:56:01 +1000
The fd driver reported the wrong cylinder/head/sector numbers after an
error (ST3 is only valid after a sense-drive command), and didn't report
fs block numbers (diskerr was not used).

There was an old problem with writes to block fd devices.   Try this:

1. write protect floppy in fd0.
2. tar cf /dev/fd0a /dev/null.  Repeat a few times.  Later writes tend to
   terminate earlier.
   3. un-write protect floppy.
   4. repeat step 2.  The writes tend to return 0, 2048, 4096, ... and then
      succeed.

This was caused by a bug in vfs__bios.c.  (The bug is fixed in NetBSD's
vfs_bio.c.)  fd.c sets bp->b_resid to nonzero after an error.  vfs__bios.c
was not initializing bp->b_resid.  This causes some writes to terminate
early (e.g., writes to block devices; see spec_write()).

Related funnies:

1. Nothing tries to write the residual bytes.
2. The wd driver sets bp->b_resid to 0 after an error, so there's no
   way anything else could write the residual bytes.
3. I use the block fd device for tar because the raw device seemed to
   have more bugs long ago, and because it ought to be able to handle
   buffering more transparently (I don't want to have to know the
   device size).  But spec_write() always uses the size BLKDEV_IOSIZE
   == 2048 which is too small.  For disks it should use the size of
   one track (rounded down to meet the next track boundary or the i/o
   size).  Here it would help if the DIOCGPART ioctl worked.  But
   DIOCGPART is not implemented for floppies, and the disk size is
   ignored except for partitions of type FS_BSDFFS.

Bruce
1993-09-23 15:22:57 +00:00
David Greenman
60381058cd rewrote interrupt code to be cleaner, fixed up some other parts
to make it easier to add future board types.
1993-09-22 17:47:43 +00:00
Rodney W. Grimes
dc4ff321f2 Removed $Log$ section and patch kit headers. And here is the full
message for Bruces changes:

>From: bde@kralizec.zeta.org.au (Bruce Evans)
>Subject: fixes for fd driver

I think I've fixed some bugs in the 0.2.4 fd driver.

1. The main cause of hangs was that there was no timeout for seeks.  So
   attempting i/o with no floppy in the drive hung iff a seek was required.

2. Opens of unattached drives were allowed.  The kernel usually paniced
   soon after due to a bad pointer.

3. Some timeout functions ran at splclock() instead of splbio().  This
   may not have mattered.

4. The state machine was left in a funny state after a timeout.

5. Some function headers were new-style.

6. I picked up some code posted the other day to implement label ioctls.
   Now `disklabel fd0' works.  See a comment for how to modify conf.c.
1993-09-15 23:27:45 +00:00
Rodney W. Grimes
02aa90d831 >From: paul@u.tvt.se (Paul Pries)
>Subject: Bad bug in kbdtables.h [FreeBSD]

I found a bug in /sys/i386/isa/kbdtables.h which contain the
different keyboard layouts for syscons.  This regards all tables exept
the Danish and US.  When compiling the kernel with any other keymapping
than Danish or none at all (US), you get an error that 'key_map' is undefined.
This is because there is a typo in the name of the struct containing
the tables, keymap intead of key_map.
1993-09-15 23:03:21 +00:00
Jordan K. Hubbard
f5f7ba035f Bruce's multifarious patches for the floppy driver (not well tested, but
since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Rodney W. Grimes
e793dbb026 From guido@gvr.win.tue.nl Wed Sep 8 13:34:16 1993
That is because TIOCMGET was broken. Yes...this is known for some time
and no, we (Bruce and me) never posted it. Why? Simply because we choose
to post fixes when we fixed most of the bugs.

Anyway..now that the slip problems are coming, here is a fix for
correct TIOCMGET behaviour.

-Guido
Note: this should be tested first (Rich?).  Tested by rgrimes
1993-09-10 16:59:16 +00:00
David Greenman
1df5695c0a As of this revision, all known bugs have been fixed. Some of the fixes include:
1) fixed 3c503 lock-up if the thinwire cable was disconnected at boot time
2) 8013EBT boards now work (quite well!) in 16bit/16k mode
3) ED_NO_DOUBLE_BUFFERING flag now works
4) slightly higer performance (about 3%) with 16bit WD/SMC boards
5) support for WD8013WC (10BaseT) boards

   Additionally, the probe code has been reorganized to be much cleaner. This
revision of the driver is 1.25. The release notes have been updated as well.
1993-09-09 07:01:23 +00:00
Jordan K. Hubbard
cc4dfeaaa0 Soren's latest syscons changes. 1993-09-08 22:11:48 +00:00
Rodney W. Grimes
bfdbfb98fd From michaele@vice.ico.tek.com Wed Sep 8 09:50:45 1993
Subject: Re: Some small errors in GAMMA
4.      Move printf("\n"); at line 491 in "/sys/i386/isa/sio.c" to after
        COM_MULTIPORT block at line 512.
From rgrimes:
The above would cause the word (multiport) with out a new line to
appear after the uart type message if you had COM_MULTIPORT enabled.
1993-09-08 17:38:05 +00:00
Rodney W. Grimes
4ada418a9b Replaced the return (1)'s with return (IO_KBDSIZE) in the probe code so
that the printfs during the probing prints the range instead of just the
start address.
1993-08-28 13:26:30 +00:00
Rodney W. Grimes
89bc97311a xxxprobe now returns the correct number of I/O registers used so that
the probe output during boot gives the I/O range instead of just the
starting address
1993-08-28 03:02:52 +00:00
Rodney W. Grimes
3c742f974a Added from: line to reference the pccons.c derivation of this code, otherwise
the BSD copyright would be very bad to have on this file.
1993-08-20 17:19:29 +00:00
Rodney W. Grimes
3b3837db61 Fixed poor timeout code in out_fdc. The timeout counter was not being
reinitialized between while loops.  Added comments about what was going
on in the out_fdc routine.

out_fdc now returns if the direction bit is not set in time instead of
trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
David Greenman
0d1a37c0f1 * Fixed problem where some rev 8013EBT boards want the DCR_LS flag
* set in order to work in 16bit mode.

   Seems also to improve performance by 15%! (?!) I think there might
be more to this flag than the manual says.
1993-08-02 10:36:05 +00:00
Jordan K. Hubbard
c3b435bb51 Updated syscons to 0.2b - please test this! It won't be in the ALPHA
release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
David Greenman
269312019a * Applied fixes from Bruce Evans to fix COW bugs, >1MB kernel loading,
profiling, and various protection checks that cause security holes
  and system crashes.
* Changed min/max/bcmp/ffs/strlen to be static inline functions
  - included from cpufunc.h in via systm.h. This change
  improves performance in many parts of the kernel - up to 5% in the
  networking layer alone. Note that this requires systm.h to be included
  in any file that uses these functions otherwise it won't be able to
  find them during the load.
* Fixed incorrect call to splx() in if_is.c
* Fixed bogus variable assignment to splx() in if_ed.c
1993-07-27 10:52:31 +00:00
David Greenman
49386830c3 * Added include of systm.h to pick up inlined min/max/bcmp if you have
* them in cpufunc.h. Modified wait loop in reset to look a little better.
 * Added read for talley counters to prevent an infinite loop on old
 * 8003E's if they (the counters) overflow.
1993-07-27 03:13:50 +00:00
Jordan K. Hubbard
916347f77e Added necessary files for syscons (may move font include later, but for now
it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
David Greenman
d0338d9612 Fixed logic problem which caused a bogus value to be written to the 3c503
asic register even if the board isn't a 3c503. This caused old 8003E's not
to work because they ignore IO address bits >10bits and the 3c503 asic is
located at +0x400....the offset was ignored by the 8003E and so the
value was written to one of the NIC registers. The bug was discovered by
Wolfgang Solfrank.
1993-07-25 23:43:30 +00:00
David Greenman
69a164c5e3 Added config file override for memory size and added flags to force
8bit or 16bit operation, and a flag to disable transmitter double buffering.
   See the updated "ed.relnotes" file for information about how to set
the flags.
   This should be considered the first "production"  release. It still
needs a manual page, though.
1993-07-20 23:16:50 +00:00
Jordan K. Hubbard
ba52f64934 Applied Andrew's patch to fix loop-on-logout problem. 1993-07-20 02:06:49 +00:00
Jordan K. Hubbard
c58613f344 Changed comment relating to memsize to be a little less misleading. 1993-07-20 02:02:12 +00:00
Jordan K. Hubbard
2a1e5244b2 Fixed to allow iosiz config parameter to override what was (for me,
incorrectly) probed.  This allows you more flexibility in getting weird
WD 80x3 clones to work.
1993-07-20 01:39:24 +00:00
Jordan K. Hubbard
bb5d729efe Removed check for interrupting board before interrupts were enabled.
This should result in more AST clones getting seen.
1993-07-20 00:22:30 +00:00
Rodney W. Grimes
7ea04e18b1 Fixed sccs id to be From:\n com.c xxxx. The sccs id was changed by the
patch kit and it should not have been.
1993-07-18 21:27:57 +00:00
David Greenman
2a6c898016 Modified attach printf's so that the output is compatible with the "new"
way of doing things. There still remain several drivers that need to
be updated.  Also added a compile-time option to pccons to switch the
control and caps-lock keys (REVERSE_CAPS_CTRL) - added for my personal
sanity.
1993-07-15 17:53:14 +00:00
David Greenman
43d5830f3d fixed bugs in the probe routine uncovered by the previous fix. 1993-06-27 10:28:28 +00:00
David Greenman
3340e10399 fixed bug in probe that causes it to complain about 'Invalid irq configuration'
if the interface isn't present in the system.
1993-06-26 02:32:26 +00:00
David Greenman
c8378b88c6 Second beta release of device driver for SMC/WD 80x3 ethernet boards +
some additional comments.
1993-06-23 16:22:04 +00:00
David Greenman
258445a954 Second beta release of device driver for WD/SMC 80x3 and 3c503 ethernet boards 1993-06-22 12:10:07 +00:00
David Greenman
8eece53087 Beta release of device driver for SMC/WD80x3 and 3C503 ethernet boards. 1993-06-14 22:21:25 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00