When a rescue retransmission is successful, rather than
inserting new holes to the left of it, adjust the old
rescue entry to cover the missed sequence space.
Also, as snd_fack may be stale by that point, pull it forward
in order to never create a hole left of snd_una/th_ack.
Finally, with DSACKs, tcp_sack_doack() may be called
with new full ACKs but a DSACK block. Account for this
eventuality properly to keep sacked_bytes >= 0.
MFC after: 3 days
Reviewed By: kbowling, tuexen, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29835
This change makes the TCP LRO code more generic and flexible with regards
to supporting multiple different TCP encapsulation protocols and in general
lays the ground for broader TCP LRO support. The main job of the TCP LRO code is
to merge TCP packets for the same flow, to reduce the number of calls to upper
layers. This reduces CPU and increases performance, due to being able to send
larger TSO offloaded data chunks at a time. Basically the TCP LRO makes it
possible to avoid per-packet interaction by the host CPU.
Because the current TCP LRO code was tightly bound and optimized for TCP/IP
over ethernet only, several larger changes were needed. Also a minor bug was
fixed in the flushing mechanism for inactive entries, where the expire time,
"le->mtime" was not always properly set.
To avoid having to re-run time consuming regression tests for every change,
it was chosen to squash the following list of changes into a single commit:
- Refactor parsing of all address information into the "lro_parser" structure.
This easily allows to reuse parsing code for inner headers.
- Speedup header data comparison. Don't compare field by field, but
instead use an unsigned long array, where the fields get packed.
- Refactor the IPv4/TCP/UDP checksum computations, so that they may be computed
recursivly, only applying deltas as the result of updating payload data.
- Make smaller inline functions doing one operation at a time instead of
big functions having repeated code.
- Refactor the TCP ACK compression code to only execute once
per TCP LRO flush. This gives a minor performance improvement and
keeps the code simple.
- Use sbintime() for all time-keeping. This change also fixes flushing
of inactive entries.
- Try to shrink the size of the LRO entry, because it is frequently zeroed.
- Removed unused TCP LRO macros.
- Cleanup unused TCP LRO statistics counters while at it.
- Try to use __predict_true() and predict_false() to optimise CPU branch
predictions.
Bump the __FreeBSD_version due to changing the "lro_ctrl" structure.
Tested by: Netflix
Reviewed by: rrs (transport)
Differential Revision: https://reviews.freebsd.org/D29564
MFC after: 2 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Extract the state killing code from pfioctl() and rephrase the filtering
conditions for readability.
No functional change intended.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29795
All cross-building patches have been merged to stable/13 so it should
also build fine on macOS+Linux.
Reviewed By: uqs
MFC after: immediately
Differential Revision: https://reviews.freebsd.org/D29831
In clang 12.0.0.rc2, going from weak to global is now a hard error:
```
/usr/src/stand/libsa/amd64/_setjmp.S:67:25: error: _longjmp changed binding to STB_GLOBAL
.text; .p2align 4,0x90; .globl _longjmp; .type _longjmp,@function; _longjmp:; .cfi_startproc
```
And the other way is a warning, but we have -Werror:
```
error: __start_set_Xcommand_set changed binding to STB_WEAK [-Werror,-Winline-asm]
error: __stop_set_Xcommand_set changed binding to STB_WEAK [-Werror,-Winline-asm]
```
ref: https://reviews.llvm.org/D90108
Reviewed By: arichardson
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29159
At a recent testing event I found out that I had misinterpreted
RFC5661 where it describes the stripe size in the File Layout's
nfl_util field. This patch fixes the pNFS File Layout server
so that it returns the correct value to the NFSv4.1/4.2 pNFS
enabled client.
This affects almost no one, since pNFS server configurations
are rare and the extant pNFS aware NFS clients seemed to
function correctly despite the erroneous stripe size.
It *might* be needed for correct behaviour if a recent
Linux client mounts a FreeBSD pNFS server configuration
that is using File Layout (non-mirrored configuration).
MFC after: 2 weeks
For some reason the ld128 log1pl() implementation is less accurate than
logl(), but does at least guarantee precision >= the ld80 implementation.
Mark log1p_accuracy_tests as XFAIL for ld128 and increase the log1p tolerance
to the ld80 equivalent in accuracy_tests to avoid losing test coverage for
the other functions.
PR: 253984
Reviewed By: ngie, dim
Differential Revision: https://reviews.freebsd.org/D29039
While most 64-bit architectures have an assembly implementation of this
file, RISC-V does not. As we now store 8 bytes instead of 4 it should speed
up RISC-V.
Reviewed By: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29536
While most 64-bit architectures have an assembly implementation of this
file RISC-V does not. As we now copy 8 bytes instead of 4 it should speed
up RISC-V. Using intptr_t instead of int also allows using this file for
CHERI pure-capability code since trying to copy pointers using integer
loads/stores will invalidate pointers.
Reviewed By: kib
Obtained from: CheriBSD (partially)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29535
Upstream flex has added a yynoreturn, so this diff is no longer needed.
Partially reverts r181269. Also regenerate the pre-generated files that
are used for bootstrapping.
Reviewed By: jkim
Differential Revision: https://reviews.freebsd.org/D29679
Apple clang uses a different versioning scheme, so if we enable or
disable certain warnings for Clang 11+, those might not be supported
in Apple Clang 11+. This adds 'apple-clang' to COMPILER_FEATURES, so that
bootstrap tools Makefiles can avoid warnings on macOS.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D29680
Use NULL for pointers instead of '0' (though hey are the same thing in
these cases). Ditto for using the zero character '\0' instead of a naked
0 (ditto).
Reviewed by: markj@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29847
Add support for current and future client platform PCI IDs. These are
all I219 variants and have no known driver changes versus previous
generation client platform I219 variants.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29801
There are a number of issues in the e1000 multicast filter handling
that have been present for a long time. Take the updated approach from
ixgbe(4) which does not have the issues.
The issues are outlined in the PR, in particular this solves crossing
over and under the hardware's filter limit, not programming the
hardware filter when we are above its limit, disabling SBP (show bad
packets) when the tunable is enabled and exiting promiscuous mode, and
an off-by-one error in the em_copy_maddr function.
PR: 140647
Reported by: jtl
Reviewed by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29789
We don't need to set the bits here since the if/else if/else statements
fully cover setting these bit pairs.
Reported by: markj
Reviewed by: markj, erj
Approved by: #intel_networking
MFC aftter: 1 week
Differential Revision: https://reviews.freebsd.org/D29827
We generally want to build and test on the highest release version, and
FreeBSD 13.0 also brings some performance benefits.
Reviewed by: lwhsu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29842
Apparently new dialog does not like the height of 2 for the
timebox widget, use 0 (minimum size) instead.
Do the same for calendar widget as it does not change the
appearance and to prevent possible future surprises.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29720
Only allocate struct_mm after we checked that other threads do not carry
useful mm_struct. If they don't, drop process lock, allocate, and recheck.
Note that for M_NOWAIT allocations we could avoid dropping process lock,
but I do not think that this increased complexity is useful.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
Create and use zones for task and mm. Reserve items in zones based on the
estimation of the max number of interrupts in the system. Use M_USE_RESERVE
to allow to take reserved items when allocation occurs from the interrupt
thread context.
Of course, this would only work first time we allocate the task for
interrupt thread. If interrupt is deallocated and allocated anew,
creating a new thread, it might be that zone is depleted. It still
should be good enough for practical uses.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
For anonymous objects, provide a handle kvo_me naming the object,
and report the handle of the backing object. This allows userspace
to deconstruct the shadow chain. Right now the handle is the address
of the object in KVA, but this is not guaranteed.
For the same anonymous objects, report the swap space used for actually
swapped out pages, in kvo_swapped field. I do not believe that it is
useful to report full 64bit counter there, so only uint32_t value is
returned, clamped to the max.
For kinfo_vmentry, report anonymous object handle backing the entry,
so that the shadow chain for the specific mapping can be deconstructed.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29771
In particular, this avoids malloc(9) calls when from early tunable handling,
with no working malloc yet.
Reported and tested by: mav
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This also partially reverts r326025 (8a16b7a18f). I do not see any
point of adding SPDX tag in generated file.
MFC after: 3 days
Submitted by: Dan McGregor <dan.mcgregor@usask.ca> (initial version)
Differential Revision: https://reviews.freebsd.org/D28596
Usually rule counters are reset to zero on every update of the ruleset.
With keepcounters set pf will attempt to find matching rules between old
and new rulesets and preserve the rule counters.
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29780
PFRULE_REFS should never be used by userspace, so hide it behind #ifdef
_KERNEL.
MFC after: never
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29779
Split the PFRULE_REFS flag from the rule_flag field. PFRULE_REFS is a
kernel-internal flag and should not be exposed to or read from
userspace.
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29778
IEEE Std 802.1D-2004 Section 17.14 defines permitted ranges for timers.
Incoming BPDU messages should be checked against the permitted ranges.
The rest of 17.14 appears to be enforced already.
PR: 254924
Reviewed by: kp, donner
Differential Revision: https://reviews.freebsd.org/D29782
This is required for the current Arch Linux binaries to work.
PR: 254112
Reviewed By: emaste
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D29218
This commit should not have introduced any functional changes, but
apparently it did. This appears to have broken LDAP setups.
Reverting for now. Will reland once I have fixed the breakage.
This reverts commit 5245bf7b92.
Reported By: Александр Недоцуков, brd
MFC after: immediately
- Use malloc(9) to allocate ivhd_hdrs list. The previous assumption
that there are at most 10 IVHDs in a system is not true. A counter
example would be a system with 4 IOMMUs, and each IOMMU is related
to IVHDs type 10h, 11h and 40h in the ACPI IVRS table.
- Always scan through the whole ivhd_hdrs list to find IVHDs that has
the same DeviceId but less prioritized IVHD type.
Sponsored by: The FreeBSD Foundation
MFC with: 74ada297e8
Reviewed by: grehan
Approved by: lwhsu (mentor)
Differential Revision: https://reviews.freebsd.org/D29525
The NAV (network allocation vector) register reflects the current MAC
tracking of NAV - when it will stay quiet before transmitting.
Other devices transmit their frame durations in their 802.11 PHY headers
and all devices that hear a frame - even if it's one in an encoding
they don't understand - will understand the low bitrate PHY header that
includes the frame duration. So, they'll set NAV to this value so
they'll stay quiet until the transmit completes.
Anyway, sometimes the PHY NAV header is garbled and sometimes, notably
older broadcom devices, will fake a long NAV so they can get "cleaner" air
for local calibration. When this happens, the hardware will stay quiet
for quite some time and this can lead to missed/stuck beacons, or
(for Very Large Values) a MAC hang.
This code just adds the ability to get/set the NAV; the driver will
need to take care of using it during transmit hangs and beacon misses
to see if it's due to a trash looking NAV.
