This is the general support to allow the use of GPIO pins as interrupt
sources for direct gpiobus children.
The use of GPIO pins as generic interrupt sources (for an ethernet driver
for example) will only be possible when arm/intrng is complete. Then, most
of this code will need to be rewritten, but it works for now, is better
than what we have and will allow further developments.
Tested on: ar71xx (RSPRO), am335x (BBB), bcm2835 (Raspberry pi)
Differential Revision: https://reviews.freebsd.org/D999
Reviewed by: rpaulo
This rounding up was lost in a mismerge of illumos code.
See r268075 MFV r267565.
After that commit zio_compress_data() no longer performs any compressed
size adjustment, so it needs to be done externally. On FreeBSD we round
up the size using vdev_ashift rather than SPA_MINBLOCKSIZE so that 4KB
devices are properly supported.
Additionally, zero out the buffer tail only if compression succeeds.
The compression is considered successful if the size of compressed
data after rounding up to account for the vdev ashift is less than the
original data size. It does not make sense to have the data compressed
if all the savings are lost to rounding up.
With the new zio_compress_data() it could have been possible that the
rounded compressed size would be greater than the original size and thus
we could zero beyond the allocated buffer if the zeroing code was kept
at the original place.
Discussed with: delphij, gibbs
MFC after: 2 weeks
X-MFC with: r274627
Size of physical ZIOs must never be implicitly adjusted, it's
a responsibility of a caller to make sure that such a ZIO has proper offset
and size.
Discussed with: delphij, gibbs
MFC after: 2 weeks
After r265152 TRIM requests are ZIO_TYPE_FREE instead of ZIO_TYPE_IOCTL
this meant file backed vdevs to attempted to process the ZIO as a write
causing a panic.
We now disable TRIM on file backed vdevs and ASSERT the ZIO types supported
by each vdev type to ensure we explicity support the ZIO type being
processed.
Also ensure that TRIM on init is not procesed for devices which declare they
didn't support TRIM via vdev_notrim.
PR: 195061, 194976, 191573
Sponsored by: Multiplay
Update route MTU in case of ifnet MTU change.
Add new RTF_FIXEDMTU to track explicitly specified MTU.
Old behavior:
ifconfig em0 mtu 1500->9000 -> all routes traversing em0 do not change MTU.
User has to manually update all routes.
ifconfig em0 mtu 9000->1500 -> all routes traversing em0 do not change MTU.
However, if ip[6]_output finds route with rt_mtu > interface mtu, rt_mtu
gets updated.
New behavior:
ifconfig em0 mtu 1500->9000 -> all interface routes in all fibs gets updated
with new MTU unless RTF_FIXEDMTU flag set on them.
ifconfig em0 mtu 9000->1500 -> all routes in all fibs gets updated with new
MTU unless RTF_FIXEDMTU flag set on them AND rt_mtu is less than ifp mtu.
route add ... -mtu XXX automatically sets RTF_FIXEDMTU flag.
route change .. -mtu 0 automatically removes RTF_FIXEDMTU flag.
PR: 194238
MFC after: 1 month
CR: D1125
We used to invalidate the cache for PREREAD alone, or writeback+invalidate
for PREREAD with PREWRITE, then treat POSTREAD as a no-op. Prefetching on
modern systems can lead to parts of a DMA buffer getting pulled into the
caches while DMA is in progress (due to access of "nearby" data), so it's
mandatory to invalidate during the POSTREAD sync even if a PREREAD
invalidate also happened.
In the PREREAD case the invalidate is done to ensure that there are no
dirty cache lines that might get automatically evicted during the DMA,
corrupting the buffer. In a PREREAD+PREWRITE case the writeback which is
required for PREWRITE handling is suffficient to avoid corruption caused
by eviction and no invalidate need be done until POSTREAD time.
Submitted by: Michal Meloun <meloun@miracle.cz>
The PREWRITE handling does a writeback of any dirty cachelines, so there's
no danger of an eviction during the DMA corrupting the buffer. There will
be an invalidate done during POSTREAD, so doing it before the read too is
wasted time.
Due to adapter->hw.fc.requested_mode is filled with default value
after ixgbe_initialize_receive_units(), this leads to enabling
DROP_EN in most cases.
Tested by: ae
MFC after: 1 week
Like in r259717, the prority goes from "error" to "debug" to avoid
spamming logs when the connectors are polled.
PR: 194770
Submitted by: Larry Rosenman <ler@lerctr.org>
MFC after: 1 week
This significantly reduces lock contention when adding/removing knotes
on busy multi-kq system... Next step is to cache these references per
kq.. i.e. kq refs it once and keeps a local ref count so that the same
refs don't get accessed by many cpus...
only allocate a knote when we might use it...
Add a new flag, _FORCEONESHOT.. This allows a thread to force the
delivery of another event in a safe manner, say waking up an idle http
connection to force it to be reaped...
If we are _DISABLE'ing a knote, don't bother to call f_event on it, it's
disabled, so won't be delivered anyways..
Tested by: adrian
on i386 PAE. Previously, VM_PHYSSEG_SPARSE could not be used on amd64 and
i386 because vm_page_startup() would not create vm_page structures for the
kernel page table pages allocated during pmap_bootstrap() but those vm_page
structures are needed when the kernel attempts to promote the corresponding
kernel virtual addresses to superpage mappings. To address this problem, a
new public function, vm_phys_add_seg(), is introduced and vm_phys_init() is
updated to reflect the creation of vm_phys_seg structures by calls to
vm_phys_add_seg().
Discussed with: Svatopluk Kraus
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
for cache maintenance operations, but ensure that all prior writes have
reached memory when doing a PREWRITE sync.
Submitted by: Michal Meloun <meloun@miracle.cz>
I did this wrong - I should've included a state flag for each callout
to see if it was supposed to run or not. I didn't do that.
Instead, just use mutexes anyway.
Suggested by: jhb
- Add a per-device mutex to the softc and use it for bus_dma tags,
CAM SIMs, callouts, and interrupt handler.
- Switch from timeout(9) to callout(9).
- Add a separate global mutex to protect the global event buffer ring.
- Return completed index from iir_intr_locked() and remove the global
gdt_wait_* variables.
- Remove global list of gdt softcs and replace its use with
devclass_get_device().
- Use si_drv1 to store softc pointer in the SDEV_PER_HBA case instead
of minor numbers.
- Do math on osreldate instead of dubious char math on osrelease[]
that didn't work on 10.0+.
- Use bus_*() instead of bus_space_*().
- Use device_printf() instead of printf() with a unit number.
Tested by: no one
Not all consumers providing fdp to copy from want files.
Perhaps these functions should be reorganized to better express the outcome.
This fixes up panics after r273895 .
Reported by: markj
to the build in either sys/conf/files* or sys/modules/dpt/Makefile. Also,
it was denoted as "doesn't quite work yet" when the file was initially added
(which may account for it never having been hooked up to the build).
uc_busy value, and not its address [1].
Remove the single use of the macro, write KASSERT() explicitely in the
code of umtxq_sleep_pi().
Submitted by: Eric van Gyzen <eric@vangyzen.net> [1]
MFC after: 1 week
have both kern_open() and kern_openat(); change the callers to use
kern_openat().
This removes one (sometimes two) levels of indirection and
consolidates arguments checks.
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
