Replace hardcoded sizes by nitems and sizeof
Replace CTLFLAG_NEEDGIANT with CTLFLAG_MPSAFE, I run this driver since a few
years with CTLFLAG_MPSAFE w/o issues.
Replace hardcoded sizes by nitems and sizeof
Replace CTLFLAG_NEEDGIANT with CTLFLAG_MPSAFE, I run this driver since a few
years with CTLFLAG_MPSAFE w/o issues.
Add a HACK to handle a special case for a sensor location.
Since switch to the lockless grab, shared busy for ahead/behind pages
allows other threads to validate and map the pages readonly.
Reviewed by: avg, jeff, markj
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D23986
32-bit Book-E doesn't set UMA_MD_SMALL_ALLOC, and 32-bit OEA platforms
have a 32-bit vm_paddr_t. Moreover, this code was wrong in that it
leaked the page if the check failed.
Reviewed by: jhibbits
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23991
The aim is to reduce the boilerplate needed today to define and
initialize global counters. Also add SI_SUB_COUNTER to the sysinit
ordering.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23977
file systems to safely access their disk devices, and adapt FFS to use it.
Also add a new BO_NOBUFS flag to allow enforcing that file systems using
mntfs vnodes do not accidentally use the original devfs vnode to create buffers.
Reviewed by: kib, mckusick
Approved by: imp (mentor)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D23787
Reland r374450 with Richard Smith's comments and test fixed.
The behavior from the original patch has changed, since we're no
longer allowing LLVM to just ignore the alignment. Instead, we're
just assuming the maximum possible alignment.
Differential Revision: https://reviews.llvm.org/D68824
llvm-svn: 374562
This fixes 'Assertion failed: (Alignment != 0 && "Invalid Alignment"),
function CreateAlignmentAssumption', when building recent versions of
v8, which invoke __builtin_assume_aligned() with its alignment argument
set to 4GiB or more.
Clang will now report a warning, and show the maximum possible alignment
instead, e.g.:
huge-align.cpp:1:27: warning: requested alignment must be 536870912 bytes or smaller; maximum alignment assumed [-Wbuiltin-assume-aligned-alignment]
void *f(void *g) { return __builtin_assume_aligned(g, 4294967296); }
^ ~~~~~~~~~~
Upstream PR: https://bugs.llvm.org/show_bug.cgi?id=43839
Reported by: cem
MFC after: 3 days
- Add more registers needed by bhyve [1]
- Move EL2 registers from armreg.h to hypervisor.h
- Add the register name to hypervisor.h
Obtained from: https://github.com/FreeBSD-UPB/freebsd [1]
This fixes some errors on PPC64, during attach and when trying to assign an IP
to an interface. With this change, basic operation of X710 NICs is now
possible.
This also fixes builds with IXL_DEBUG enabled
Reviewed by: erj
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23975
As written, the condition of (cdb[0] != 0x28 || cdb[0] != 0x2A) will always
be true, since if it's one, it's obviously not the other. Reading the code,
the intent appears to be that it should only perform the operation if it's
neither, otherwise the conditional can be elided.
Found by clang 10.
Summary:
POWER architecture CPUs (Book-S) require natural alignment for
cache-inhibited storage accesses. Since we can't know the caching model
for a page ahead of time, always enforce natural alignment in memcpy.
This fixes a SIGBUS in X with acceleration enabled on POWER9.
As part of this, revert r358672, it's no longer necessary with this fix.
Regression tested by alfredo.
Reviewed by: alfredo
Differential Revision: https://reviews.freebsd.org/D23969
r358556 added alignas() use to the functional tests, which isn't defined
until C11. Raise the -std to C11 to fix the build under freebsd-gcc{6,9}.
Reported by: mhorne, Jenkins/CI
Previously _libelf_cvt_NOTE_tom (to host) returned false if a note's
namesz + descsz exceeded the buffer size, while _libelf_cvt_NOTE_tof
(to file) silently truncated. Return false in the latter case too.
Sponsored by: The FreeBSD Foundation
Port aacraid driver to big-endian (BE) hosts.
The immediate goal of this change is to make it possible to use the
aacraid driver on PowerPC64 machines that have Adaptec Series 8 SAS
controllers.
Adapters supported by this driver expect FIB contents in little-endian
(LE) byte order. All FIBs have a fixed header part as well as a data
part that depends on the command being issued to the controller.
In this way, on BE hosts, the FIB header and all FIB data structures
used in aacraid.c and aacraid_cam.c need to be converted to LE before
being sent to the adapter and converted to BE when coming from it.
The functions to convert each struct are on aacraid_endian.c.
For little-endian (LE) targets, they are macros that expand
to nothing.
In some cases, when only a few fields of a large structure are used,
the fields are converted inline, by the code using them.
PR: 237463
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23887
Ucred is passed to bread(9) so that non-local filesystems use proper
credentials. But, since clean buffer might be cached unless
buf_pager_relbuf is not enabled, it makes credentials to have extra
reference until buffer is reclaimed. Ucred reference would prevent
jail from destroying if creds are jailed.
Dereferencing the read credentials on the valid buffer avoid that, and
should be fine because the buffer is valid and does not need re-read.
PR: 238032
Reported by: bz
Reproduced and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23775
VSX instructions were added in POWER ISA V2.06 (POWER7), but it
requires data to be word-aligned. Such requirement was removed in
ISA V2.07B (POWER8).
Since current memcpy/bcopy optimization relies on VSX instructions
handling misalignment transparently, and kernel doesn't currently
implement an alignment error handler, this optimzation should be
restrict to ISA V2.07 onwards.
SIGBUS on stxvd2x instruction was reproduced in POWER7+ CPU.
Reviewed by: luporl, jhibbits, bdragon
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D23958
Fix panic "Freeing UMA block at 0xn with no associated page".
Also replaces pmap_remove call by pmap_kremove, for symmetry.
Reviewed by: jhibbits
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D23931
of xpt_done(). Add the missing XPT_ASYNC case to xpt_action_default. xpt_async
wants to use the side-effect of the xpt_done() routine to queue this to the
camisr thread so it can be done in that context. However, this breaks the
symmetry that you create a ccb and call xpt_action() for it to be
dispatched. Restore that symmetry by having it go through that path. As far as I
can tell, this is the only CCB that we create and call xpt_done() on directly.
interfaces are configured, but for many interfaces (e.g. all Intel)
ifconfig causes link renegotiation, so the first attempt to mount
NFS always fails. After that mount_nfs sleeps for 30 seconds, while
only a couple seconds are actually required for interface to get up.
Instead of sleeping, do select(2) on routing socket and check if
some interface became UP and in this case retry immediately.
Reviewed by: rmacklem
Differential Revision: https://reviews.freebsd.org/D23934
This presents an extensible interface to the generic mmap(2)
implementation via a struct pointer intended to use a designated
initializer or compount literal. We take advantage of the mandatory
zeroing of fields not listed in the initializer.
Remove kern_mmap_fpcheck() and use kern_mmap_req().
The motivation for this change is a desire to keep the core
implementation from growing an ever-increasing number of arguments
that must be specified in the correct order for the lowest-level
implementations. In CheriBSD we have already added two more arguments.
Reviewed by: kib
Discussed with: kevans
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D23164
LLD 10.0.0 changed the behavior of the -Ttext option, so that using
-Ttext=0x0 now causes linking of the loaders to fail with:
ld: error: output file too large: 18446744073707016908 bytes
I reported this in https://bugs.llvm.org/show_bug.cgi?id=44715, and
initially reverted the upstream change in r357259 to work around it.
However, after some discussion with Fangrui Song in the upstream ticket,
I think we can classify this as an unfortunate interaction between using
-Ttext=0 in combination with --no-rosegment. (We added the latter
in r332090, because btxld does not correctly handle input with more
than 2 PT_LOAD segments.)
Fangrui suggested to use a linker script instead, and Warner was already
attempting this in r305353, but had to revert it due to "crypto-using
boot problems" (not sure what those were :).
This review updates the stand/i386/boot.ldscript to handle more
sections, inserts some symbols like _edata and such that we use in
libsa, and also discards any .interp section.
It uses ORG which is defined on the linker command line using
--defsym ORG=value to set the start of all the sections.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23952
Previously corrupt note namesz or descsz (perhaps caused by readelf's
current lack of endian support for notes) resulted in a crash. Check
that namesz and descsz do not extend beyond the end of the buffer before
trying to access name and desc data.
Reported by: jhb
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
