all of the Optio series have the same problems. It might be a better
approach eventually to add wildcard support to USB quirks.
PR: kern/50271, kern/46369
Approved by: re (rwatson)
- Fix compilation without GEM_DEBUG.
- Do not #define GEM_DEBUG by default; it adds overhead (due to bzero()ing
RX space) and is not needed any more, since the driver is quite stable
now.
- Fix watchdog timeouts when failing to load TX packets.
- Do not forcibly limit the number of descriptors used for a packet to
GEM_NTXSEGS, by passing this number to bus_dma_tag_create(). There is
no requirement for a limit any lower than the total number of
available descriptors, and the present limit caused network problems
due to mbuf chains requiring more descriptors.
GEM_NTXSEGS is still used to estimate the interrupt window size, for
which we just need an estimate.
Approved by: re (rwatson)
The submitter of PR 32118 told me that this patch also fixes autoselecting
for znyx 4 port cards (10baseT, 100baseTX did work already).
PR: 32118
Reviewed by: imp
Approved by: rwatson (re)
has already been registered with ATAPI/CAM (else there is nothing
to do). atapi_cam_reinit_bus may be called before the bus is
registered if an ATAPI command times out during the boot sequence.
PR: i386/51421
Reviewed by: roberto
Approved by: re (rwatson)
MFC after: 1 week
by using a __packed keyword for the fxp_rfa structure. The Intel
guys who designed this structure with unaligned fields deserve
to be shot.
Tested by: kris
Approved by: re@ (jhb)
bus_dma MD code for AMD64. (And a trivial ifdef update in dev/kbd because
of this). More updates are needed here to take advantage of the 64 bit
instructions.
Approved by: re (blanket amd64/*)
- Simplify and correct the bus manager election process.
- Check link_active when choosing cycle master.
- Fix location of the cmr bit.
Approved by: re (scottl)
series. This driver was generously developed and released by David
Jeffreys and Adaptec. I've updated it to work with 5.x and fixed a
few bugs.
MFC After: 1 week
ASIC revision is really the major number of the CHIPID. Also store
the chipid, asic rev and chip revision in the softc for later use.
- The write twice to send producer index workaround only applies to
the 5700_BX chips, so only do it there.
Requested by: jdp
- Do not initalize the LED's to 0x00. The default configuration
the chip comes up in should yeild proper operation of the LED's.
Confirmed by: John Cagle <john.cagle@hp.com>
Approved by: re (blanket)
ILMI daemons. Factor out common softc fields for all ATM interfaces that
need to be externally visible into an ifatm structure and make the midway
driver using this structure and fill the MIB.
Maintain sector sizes for all objects, not just for drives. Some of
this could do with improvement: in particular, we get an error if the
components of an object have different sector sizes.
Clean up some comments.
the -v option, though it's not clear that it won't bite us elsewhere.
Forgotten by: phk
Implement setreadpol() function for the VINUM_READPOL ioctl.
Submitted by: Allan Saddi <allan@saddi.com>
with it.
Finally implement read policies. The previous "implementation" didn't
work because it referred to plexes which were almost invariably when
referred to. Instead, deprecate the "prefer" keyword for volumes
(though it's still there for the moment) and add a keyword "preferred"
to the plex definition. The relationship is like this:
Old:
vol foo ... prefer foo.p3
New:
plex foo.p3 volume foo preferred
print_config: Print "preferred" where appropriate.
No longer print "prefer" on volume config entries.
work because it referred to plexes which were almost invariably when
referred to. Instead, deprecate the "prefer" keyword for volumes
(though it's still there for the moment) and add a keyword "preferred"
to the plex definition. The relationship is like this:
Old:
vol foo ... prefer foo.p3
New:
plex foo.p3 volume foo preferred
give_plex_to_volume: set preferred plex if specified on plex
definition entry. This involves adding a parameter to the function to
specify the preferred plex.
config_plex: Implement preferred keyword.
