check hash to cylinder groups. If a check hash fails when a cylinder
group is read, no further allocations are attempted in that cylinder
group until it has been fixed by fsck. This avoids a class of
filesystem panics related to corrupted cylinder group maps. The
hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Specifics of the changes:
sys/sys/buf.h:
Add BX_FSPRIV to reserve a set of eight b_xflags that may be used
by individual filesystems for their own purpose. Their specific
definitions are found in the header files for each filesystem
that uses them. Also add fields to struct buf as noted below.
sys/kern/vfs_bio.c:
It is only necessary to compute a check hash for a cylinder
group when it is actually read from disk. When calling bread,
you do not know whether the buffer was found in the cache or
read. So a new flag (GB_CKHASH) and a pointer to a function to
perform the hash has been added to breadn_flags to say that the
function should be called to calculate a hash if the data has
been read. The check hash is placed in b_ckhash and the B_CKHASH
flag is set to indicate that a read was done and a check hash
calculated. Though a rather elaborate mechanism, it should
also work for check hashing other metadata in the future. A
kernel internal API change was to change breada into a static
fucntion and add flags and a function pointer to a check-hash
function.
sys/ufs/ffs/fs.h:
Add flags for types of check hashes; stored in a new word in the
superblock. Define corresponding BX_ flags for the different types
of check hashes. Add a check hash word in the cylinder group.
sys/ufs/ffs/ffs_alloc.c:
In ffs_getcg do the dance with breadn_flags to get a check hash and
if one is provided, check it.
sys/ufs/ffs/ffs_vfsops.c:
Copy across the BX_FFSTYPES flags in background writes.
Update the check hash when writing out buffers that need them.
sys/ufs/ffs/ffs_snapshot.c:
Recompute check hash when updating snapshot cylinder groups.
sys/libkern/crc32.c:
lib/libufs/Makefile:
lib/libufs/libufs.h:
lib/libufs/cgroup.c:
Include libkern/crc32.c in libufs and use it to compute check
hashes when updating cylinder groups.
Four utilities are affected:
sbin/newfs/mkfs.c:
Add the check hashes when building the cylinder groups.
sbin/fsck_ffs/fsck.h:
sbin/fsck_ffs/fsutil.c:
Verify and update check hashes when checking and writing cylinder groups.
sbin/fsck_ffs/pass5.c:
Offer to add check hashes to existing filesystems.
Precompute check hashes when rebuilding cylinder group
(although this will be done when it is written in fsutil.c
it is necessary to do it early before comparing with the old
cylinder group)
sbin/dumpfs/dumpfs.c
Print out the new check hash flag(s)
sbin/fsdb/Makefile:
Needs to add libufs now used by pass5.c imported from fsck_ffs.
Reviewed by: kib
Tested by: Peter Holm (pho)
Make scan-build happy by casting to 'void *' instead of 'void **'.
Submitted by: pjd@
MFC after: 1 month
Found by: scan-build and cppcheck
Sponsored by: Wheel Systems
Previously we'd have an assertion failure in cap_rights_is_set if
sysdecode_cap_rights is called with an invalid cap_rights_t, so test for
validity first.
PR: 222258
Reviewed by: cem
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12391
After r308212 Capsicum permits .. lookups in capability mode, as long as
path component traversal does not escape the directory corresponding to
the provided file descriptor.
We should add a description of the vfs.lookup_cap_dotdot and
vfs.lookup_cap_dotdot_nonlocal sysctls, perhaps as a cross-reference to
capsicum(4). I intend to look at that soon.
Reviewed by: bjk, cem, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12343
Fix allocating more memory for the names (unlikely to be needed, but
still best to get right) to ask for the length the kernel told use we
needed, not the old length of the variable. Mind the proper NUL that
we add in the space we allocate. Free the old name string before we
allcoate a new one to limit what we leak to the last one (free passed
in name for the last one in the list), and detect the last one by rv
!= 0 and errno == ENOENT, rather then just the former to avoid false
positives if errno happens to be ENOENT on entry.
Sponsored by: Netflix
The memory can be leaked if we will have pkt set and will get an error
during tftp_open() processing.
Differential Revision: https://reviews.freebsd.org/D12202
efidp_size will return the size, in bytes, of a EFI device path
structure. This is a convenience wrapper in the same style as the
other linux routines. It's implemented by GetDevicePathSize from EDK2
we already needed for other things.
Sponsored by: Netflix
Avoid dealing with some code that uses type-punned pointers.
See D12210 and D12211 for more background.
Reviewed by: imp
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12219
Move tables that were previously in truss over to libsysdecode. truss
output is unchanged, but kdump has been updated to decode these fields.
In addition, sysdecode_sysarch_number() should support all platforms
whereas the old table in truss only supported x86.
the upstream release_50 branch. This corresponds to 5.0.0 rc4.
As of this version, the cad/stepcode port should now compile in a more
reasonable time on i386 (see bug 221836 for more information).
PR: 221836
MFC after: 2 months
X-MFC-with: r321369
o Add File to the mUefiDevicePathLibDevPathFromTextTable table so we
don't include 'File()' in the supposed path name. This happens because
of a possible misfeature in the EDK2 code where any path that's not
recognized is treated as a File() node.
o Convert utf8 input into ucs2 output rather than just copying the
utf8 and hoping for the best (no good comes from that).
o Remove bogus comment about needing to add 1. The dummy array already
is length 1, so that's included in sizeof the struct, so there's no
need to add it.
Sponsored by: Netflix
Device paths encoded into the FILEPATH_DEVICE_PATH are UCS2 not
ASCII/UTF8. Convert to utf8 and print that when printing File
paths. Also, since File may be at the end of a long device path,
output File() around the path so it doesn't just show up as random
nodes that might accidentally match real node paths names and cause
errors.
LLVM's MIPS assembler parser does not understand the GNU as
'.gnu_attribute' keyword. This could be re-enabled if LLVM is updated
in the future. The desired floating point ABI is already described in
the .MIPS.abiflags section.
Reviewed by: emaste
Sponsored by: DARPA / AFRL
LDBL_MAX is broken on i386:
https://lists.freebsd.org/pipermail/freebsd-numerics/2012-September/000288.html
Gcc has produced +Infinity for LDBL_MAX on i386 and amd64 with -m32
for some time, and newer versions of gcc are now warning that the
"floating constant exceeds range of 'long double'". Avoid this by
referring to proxy values instead.
Reviewed by: bde
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
conversion functions use SSE2 instructions, but these are not guarded by
#ifdef __SSE2__, and there is no implementation using general purpose
registers. For these functions, use the generic C variants instead,
otherwise they will cause SIGILL on older processors.
Reported by: bsdpr@phoe.frmug.org
PR: 221733
MFC after: 1 week
Illumos and Schillix is adopting some of the locale code and our style(9)
sometimes matches the Solaris cstyle, so the changes are also useful as a
way to reduce diffs.
No functional change.
Discussed with: Joerg Schilling
MFC after: 1 week
getmntinfo(3) is designed around a relatively static or slow growing set of
current mounts. It tried to detect a race with somewhat concurrent mount
and re-call getfsstat(2) in that case, looping indefinitely. It also
allocated space for a single extra mount as slop.
In the case where the user has a large number of mounts and is adding them
at a rapid pace, it fell over.
This patch makes two functional changes:
1. Allocate even more slop. Double whatever the last getfsstat(2) returned.
2. Abort and return some known results after looping a few times
(arbitrarily, 3). If the list is constantly changing, we can't guarantee
we return a full result to the user at any point anyways.
While here, add very basic functional tests for getmntinfo(3) to the libc
suite.
PR: 221743
Submitted by: Peter Eriksson <peter AT ifm.liu.se> (earlier version)
Sponsored by: Dell EMC Isilon
the upstream release_50 branch.
As of this version, lib/msun's trig test should also work correctly
again (see bug 220989 for more information).
PR: 220989
MFC after: 2 months
X-MFC-with: r321369
- Include debug symbols in static libraries. This permits binaries
to include debug symbols for functions obtained from static libraries.
- Permit the C/C++ compiler flags added for MK_DEBUG_FILES to be
overridden by setting DEBUG_FILES_CFLAGS. Use this to limit the debug
information for llvm libraries and binaries.
Reviewed by: emaste
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12025
These builtins were listed in the mips-specific Symbol.map for libc but
were not implemented. Compiling mips with recent clang requires these
symbols.
Sponsored by: DARPA / AFRL
instructions, if supported both by CPU and kernel.
Reviewed by: jhb (previous version)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D12023
the host argument (e.g. "www.freebsd.org:443"), the service pointer,
which is supposed to point to the port or service part, instead points
to the separator, causing getaddrinfo() to fail.
Note that I have not been able to trigger this bug with fetch(1), nor
do I believe it is possible, as libfetch always parses the host:port
specification itself. I discovered it when I copied fetch_resolve()
into an unrelated project.
MFC after: 3 days
lld can successfully link most of a working i386 userland and kernel,
but produces a broken libc. For now if we're otherwise using lld, and
ld.bfd is available, explicitly use it for libc.
Sponsored by: The FreeBSD Foundation
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
On i386 with CPUID but without SSE2, set lfence_works to LMB_NONE
instead of looping.
Reported and tested by: Andre Albsmeier <andre@fbsd.e4m.org>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The reachover Kyuafiles were never added, and thus the tests were installed
as standalone tests, and not integrated into the full suite.
MFC after: 1 week
MFC with: r305626, 305629, r307863, r322447, r322448, r322449
of freefall.freebsd.org to unbreak the DNS tests
The address allocations for freefall.freebsd.org have changed in the past 4 years.
Use a more stable set of hardcoded addresses for now to make the tests succeed
reliably.
The hostname should be resolved dynamically instead of hardcoding the addresses in
the future. This is just a bandaid.
MFC after: 1 week
Some of the testcases try to manipulate sysctls that require root privileges,
e.g., "kern.sync_on_panic". Make root-privileges a hard requirement so the
tests don't raise false positives due to privilege issues when calling
sysctlbyname(3) on writable sysctls.
MFC after: 1 week
- Flushing stdout prevents the buffer from being printed twice, fixing
issues with stdout printing out the testplan, etc, twice.
- Don't print out raw source/line numbers; hide them behind comments.
MFC after: 1 week
