It helps to reduce complexity with debugging of large ipfw rulesets.
Also define several constants and translators, that can by used by
dtrace scripts with this probe.
Reviewed by: gnn
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D26879
Move list_cloners() from ifconfig(8) to libifconfig(3) where it can be
reused by other consumers.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D26858
Improve the code reconstructing en_tw in struct fpreg32 from FXSAVE
results so that all register states are indicated correctly. The
previous code unconditionally mapped non-empty register state to
'normalized value' constant. The new code explicitly distinguishes
the 'zero value' and 'special value' constants as well. This improves
consistency between real FSAVE and translation from FXSAVE, and
ensures that tests using PT_GETFPREGS can rely on a single correct
value independently of the underlying implementation.
PR: 250454
Sponsored by: The FreeBSD Foundation
Obtained from: Moritz Systems
Submitted by: Michał Górny <mgorny@moritz.systems>
Discussed with: emaste
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26856
- Remove "opt_geom.h", no kernel options are used.
- Remove <sys/sysctl.h>, no sysctl functionality is used here.
- Remove <sys/bio.h>, requirements for bio moved out in r112534.
- Remove <sys/lock.h> and <sys/mutex.h>, last used by DROP_GIANT() and
PICKUP_GIANT(), which were removed in r115624.
- Remove <sys/disk.h> and <sys/kernel.h>, not used.
Reviewed by: phk, kevans (mentor)
Approved by: phk, kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D26805
Currently, this supports SHA1 and SHA2-{224,256,384,512} both as plain
hashes and in HMAC mode on both amd64 and i386. It uses the SHA
intrinsics when present similar to aesni(4), but uses SSE/AVX
instructions when they are not.
Note that some files from OpenSSL that normally wrap the assembly
routines have been adapted to export methods usable by 'struct
auth_xform' as is used by existing software crypto routines.
Reviewed by: gallatin, jkim, delphij, gnn
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26821
Steam's Anti-Cheat might depend on it.
PR: 248223
Analyzed by: Alex S <iwtcex@gmail.com>
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26816
This uses the .incbin directive to pull in the MFS image contents.
Using assembly directly ensures that symbols can be defined with the
name and properties (such as .size) desired without having to rename
symbols, etc. via a second objcopy invocation. Since it is compiled
by the C compiler driver, it also avoids the need for all of the
EMBEDFS* make variables.
Suggested by: jrtc27
Reviewed by: kib, markj
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26781
- Hide ptsname_r under __BSD_VISIBLE for now as the specification
is not finalized at this time.
- Keep Symbol.map sorted.
- Avoid the interposing of ptsname_r(3) from an user application
from breaking ptsname(3) by making the implementation a static
method and call the static function from ptsname(3) instead.
Reported by: kib
Reviewed by: kib, jilles
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26845
Some controllers use PCI function 1 as the requester ID for DMA transfers,
but the controllers are not PCI multifunction.
Set the iommu buswide flag for them. This should instruct an IOMMU driver
to use the same translation rule for all the devices and functions of
a bus.
This was discovered on the ARM Neoverse N1 System Development Platform
(ARM N1SDP).
Bug reference: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Reported by: andrew
Reviewed by: kib, mav
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D26857
pvscsi and vmxnet3 build and work. Exclude vmci for now as it contains
x86-specific assembly.
Reported by: Vincent Milum Jr
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This is especially important during shutdown because a child interface
of lagg with WOL enabled will not enable WOL at interface shutdown and
thus no WOL to wake up the device (and machine).
PR: 158734, 109980
Reported by: Antonio Huete Jimenez <tuxillo at quantumachine.net>
Marat N.Afanasyev <marat at zealot.ksu.ru>
reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26797
Flow control was disabled during initial TOE TLS development to
workaround a hang (and to match the Linux TOE TLS support for T6).
The rest of the TOE TLS code maintained credits as if flow control was
enabled which was inherited from before the workaround was added with
the exception that the receive window was allowed to go negative.
This negative receive window handling (rcv_over) was because I hadn't
realized the full implications of disabling flow control.
To clean this up, re-enable flow control on TOE TLS sockets. The
existing TPF_FORCE_CREDITS workaround is sufficient for the original
hang. Now that flow control is enabled, remove the rcv_over
workaround and instead assert that the receive window never goes
negative matching plain TCP TOE sockets.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26799
- Check for null pointers in the crypto_drivers[] array when checking
for empty slots in crypto_select_kdriver().
- Handle the case where crypto_kdone() is invoked on a request where
krq_cap is NULL due to not finding a matching driver.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26811
This saves a few seconds in a parallel build since we can build the
gtest_main and gmock subdirectories in parallel.
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D26760
Currently the googletest internal tests build after the matching library.
However, each of these is serialized at the top level makefile.
Additionally some of the tests (e.g. the gmock-matches-test) take up to
90 seconds to build with clang -O2. Having to wait for this test to
complete before continuing to the next directory seriously slows down the
parllelism of a -j32 build.
Before this change running `make -C lib/googletest -j32 -s` in buildenv
took 202 seconds, now it's 153 due to improved parallelism.
Reviewed By: emaste (no objection)
Differential Revision: https://reviews.freebsd.org/D26748
If lower VOP relocked the lower vnode, it is possible that nullfs
vnode was reclaimed meantime. In this case nullfs vnode no longer
shares lock with lower vnode, which breaks locking protocol.
Check for the condition and acquire nullfs vnode lock if detected.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It is a common pattern for filesystems' VOP_INACTIVE() implementation
to forcibly reclaim the vnode when its state is final. For instance,
UFS vnode with zero link count is removed, and since it is
inactivated, the last open reference on it is dropped.
On the other hand, vnode might get spurious usecount reference for
many reasons. If the spurious reference exists while vgonel() checks
for active state of the vnode, it would recurse into VOP_INACTIVE().
Fix it by checking and not doing inactivation when vgone() was called
from inactive VOP.
Reported and tested by: pho
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
During tinderbox and similar workloads negative entries get at least one
hit before they get evicted. In the current scheme this avoidably promotes
them.
Be conservative and stick to 2 hits for now.
The TF_TOE flag is the check used in the rest of the network stack to
determine if TOE is active on a socket. There is at least one path in
the cxgbe(4) TOE driver that can leave the tod pointer non-NULL on a
socket not using TOE.
Reported by: Sony Arpita Das <sonyarpitad@chelsio.com>
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26803
Only one MIPS-specific driver implements support for one of the
asymmetric operations. There are no in-kernel users besides
/dev/crypto. The only known user of the /dev/crypto interface was the
engine in OpenSSL releases before 1.1.0. 1.1.0 includes a rewritten
engine that does not use the asymmetric operations due to lack of
documentation.
Reviewed by: cem, markj
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26810
Pad the icmp6stat structure so that we can add more counters in the
future without breaking compatibility again, last done in r358620.
Annotate the rarely executed error paths with __predict_false while
here.
Reviewed by: bz, melifaro
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26578
This will cause the VM to back sufficiently large .text sections, such
as those in zfs.ko or amdgpu.ko on amd64, with superpage mappings when
possible.
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26802
When a reserve of free items is configured for a zone, the reserve must
not be reclaimed under memory pressure. Modify keg_drain() to simply
respect the reserved pool.
While here remove an always-false uk_freef == NULL check (kegs that
shouldn't be drained should set _NOFREE instead), and make sure that the
keg_drain() KTR statement does not reference an uninitialized variable.
Reviewed by: alc, rlibby
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26772
zone_import() fetches a free or partially free slab from the keg and
then uses its items to populate an array, typically filling a bucket.
If a single allocation causes the keg to drop below its minimum reserve,
the inner loop ends. However, if the bucket is still not full and
M_USE_RESERVE is specified, the outer loop will continue to fetch items
from the keg.
If M_USE_RESERVE is specified and the number of free items is below the
reserved limit, we should return only a single item. Otherwise, if the
bucket size is larger than the reserve, all of the reserved items may
end up in a single per-CPU bucket, invisible to other CPUs.
Reviewed by: rlibby
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26771
BT_MAXALLOC (4) is the number of boundary tags required to complete an
allocation in the worst case: two to clip a free segment, and two to
import from a parent arena. vmem_xalloc() preallocates four boundary
tags before attempting a search to simplify the segment allocation code.
It implements a loop that:
1) ensures that BT_MAXALLOC boundary tags are available,
2) attempts to find and clip a free segment satisfying the allocation
constraints, and failing that,
3) attempts to import a segment.
On !UMA_MD_SMALL_ALLOC platforms the btag zone has to handle recusion:
it needs boundary tags to allocate boundary tags. Thus we reserve
2 * BT_MAXALLOC * mp_ncpus tags for use when recursing: the factor of 2
is because there are two layers of vmem arenas, the per-domain arena and
global arena. For a single thread, 2 * BT_MAXALLOC tags should be
sufficient.
Because of the way the loop is structured, BT_MAXALLOC tags are not
sufficient. The first bt_fill() call may allocate BT_MAXALLOC tags,
then import a segment (consuming two tags), then attempt to top up the
preallocation before carving into the imported free segment, thus
requiring up to six tags in the worst case. Because we don't
preallocate that many, this bug can cause deadlocks in rare scenarios.
Fix the problem by moving the preallocation out the loop. This assumes
that only a single import is ever required to satisfy an allocation
request.
Thanks to manu, emaste and lwhsu for helping test debug patches.
Reported by: Jenkins (hardware CI lab)
Reviewed by: alc, kib, rlibby
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26770
Rewrite the code that maintains pm_active and invalidates EPTP-tagged
TLB entries in C. Previously this work was done in vmx_enter_guest(),
in assembly, but there is no good reason for that and it makes the TLB
invalidation algorithm for nested page tables harder to review.
No functional change intended. Now, an error from the invept
instruction results in a kernel panic rather than a vmexit. Such errors
should occur only as a result of VMM bugs.
Reviewed by: grehan, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26830
This allows the interrupt controller driver only need a small change to
create a map for the page the device will write to raise an interrupt.
Submitted by: andrew
Reviewed by: kib
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D26705
In the functions that copy between userspace and kernel space we check the
user space address is valid before performing the copy. These are mostly
identical within each type of function so create two macros to perform the
check.
Obtained from: CheriBSD
Sponsored by: Innovate UK
efivar_unix_path_to_device_path returns the error code, it does not set errno.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26852
