meant primarily for _non_ interactive use. Scripts that run cxgbtool
repeatedly to perform register r/w or mdio will benefit from this.
Instead of fork/exec'ing a new cxgbtool for every regio/mdio you can
simply open a pair of pipes to/from cxgbtool and run cmds over them.
Approved by: gnn (mentor)
The kernel does not log floppy media errors anymore.
In fdcontrol, do always open the file descriptor in read-only mode so
it can operate on read-only media, as there is no longer a separate
control device to operate on.
about a queue from a remote host. That remote host may use \r, \r\n,
or \n\r as the line-ending character. In some cases the remote host
will write a single line of information without *any* EOL sequence.
Translate all the non-unix EOL's to the standard newline, and make
sure the final line includes a terminating newline. Logic is also
added to translate all unprintable characters to '?', but that is
#if-ed out for now.
PR: bin/104731
MFC after: 3 weeks
allocates data structures that are never linked into the tree or free'd.
As such, mountd would leak memory every time it parsed an nfsv4 root line.
This patch frees up those structures to plug the leak.
Approved by: kib (mentor)
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
package rather than expecting our top level package to get all of
the dependencies correct.
Previously, the code depended on the top level package having all
of the pkgdep lines in +CONTENTS correct and in the right order,
but that doesn't always happen due to code such as this (in
security/gnutls/Makefile):
.if (defined(WITH_LZO) || exists(${LOCALBASE}/lib/liblzo2.so)) && !defined(WITHOUT_LZO)
LIB_DEPENDS+= lzo2:${PORTSDIR}/archivers/lzo2
....
With such conditional dependencies, my 'sophox-packages' package won't
install. The dependency tree looks like this:
sophox-packages
...
x11/gnome2
x11/gnome-applets
net/libgweather
devel/libsoup
security/gnutls
security/libgcrypt
security/libgpg-error
...
x11/gnome2
archivers/file-roller
archivers/gtar
archivers/lzop
archivers/lzo2
...
gnutls doesn't depend on lzo2 initially, but lzo2 is dragged into the
mix via other dependencies and is built by the initial 'make'. The
subsequent package generation for gnutls adds a pkgdep line for lzo2
to gnutls' +CONTENTS but the pkgdeps in sophox-packages' +CONTENTS
has gnutls *before* lzo2.
As a result, sophox-packages cannot install; gnutls fails because lzo2
is missing, 82 more packages fail because gnutls is missing and the
whole thing spirals into a super-confusing mess!
MFC after: 3 weeks
system callers of getgroups(), getgrouplist(), and setgroups() to
allocate buffers dynamically. Specifically, allocate a buffer of size
sysconf(_SC_NGROUPS_MAX)+1 (+2 in a few cases to allow for overflow).
This (or similar gymnastics) is required for the code to actually follow
the POSIX.1-2008 specification where {NGROUPS_MAX} may differ at runtime
and where getgroups may return {NGROUPS_MAX}+1 results on systems like
FreeBSD which include the primary group.
In id(1), don't pointlessly add the primary group to the list of all
groups, it is always the first result from getgroups(). In principle
the old code was more portable, but this was only done in one of the two
places where getgroups() was called to the overall effect was pointless.
Document the actual POSIX requirements in the getgroups(2) and
setgroups(2) manpages. We do not yet support a dynamic NGROUPS, but we
may in the future.
MFC after: 2 weeks
dace for UPDv4 sockets bound to INADDR_ANY. Move the code to set
IP_RECVDSTADDR/IP_SENDSRCADDR into svc_dg.c, so that both TLI and non-TLI
users will be using it.
Back out my previous commit to mountd. Turns out the problem was affecting
more than one binary so it needs to me addressed in generic rpc code in
libc in order to fix them all.
Reported by: lstewart
Tested by: lstewart
choice of variable names for rc.conf and option name for the
experimental server.
Also replace the inaccurate description of the nfsv4 root lines
in /etc/exports, mostly with a reference to exports(5).
Approved by: kib (mentor)
not exist to let the user know that it will be created for the next run.
2. Delete more stuff we're not going to use from the temproot prior to
creating the mtree database to dramatically reduce its size (162K -> 37K).
3. We've been deleting the zero-size files from temproot for a long time
now, so remove the spurious "-size +0" from the find command in the
comparison loop, and remove what is now a really stale comment.
set for RPC UDP sockets. Mountd uses internal libc fuctions
directly and bypasses generic socket initialization completely,
so we need to set IP_RECVDSTADDR here to match the libc behavior.
could be handled w/o fragmentation but clobbers user-specified values
such as those required when the interface is bridged.
Submitted by: jim@netgate.com
Reviewed by: Jouni Malinen
MFC after: 3 days
connections. Including a flag to instead output a sequence of tcpdrop(8)
invocations that would accomplish the same thing, which is convenient for
scripting.
o) Make tcpdrop complain if the addresses given to it are entirely in different
address families, rather than failing silently.
o) When cross-referencing httpd(8), do not explicitly specify the apache2 port,
since the example in question is generic.
lots of new features compared to 9.4.x, including:
Full NSEC3 support
Automatic zone re-signing
New update-policy methods tcp-self and 6to4-self
DHCID support.
More detailed statistics counters including those supported in BIND 8.
Faster ACL processing.
Efficient LRU cache-cleaning mechanism.
NSID support.
- Mark internal routines as static;
- Eliminate unused parameters where possible, mark __unused for others;
- Remove unused variables;
- Use %jd for int64_t values in printf();
- Add appropriate %d for printf to match its parameter;
- Rename a variable to resolve conflict with revoke(2);
Reviewed by: rmacklem
Tested with: make universe (bugs are mine)
The system hostname is now stored in prison0, and the global variable
"hostname" has been removed, as has the hostname_mtx mutex. Jails may
have their own host information, or they may inherit it from the
parent/system. The proper way to read the hostname is via
getcredhostname(), which will copy either the hostname associated with
the passed cred, or the system hostname if you pass NULL. The system
hostname can still be accessed directly (and without locking) at
prison0.pr_host, but that should be avoided where possible.
The "similar information" referred to is domainname, hostid, and
hostuuid, which have also become prison parameters and had their
associated global variables removed.
Approved by: bz (mentor)
regular one. It now takes a "-4" command line argument to force it
to use the experimental server. Otherwise it will use the regular
server unless the experimental server is the only one linked into
the kernel. A third kind of line has been added to /etc/exports,
which is specific to NFSv4 and defines where the NFSv4 tree root is
and can be used to limit access to NFSv4 state handling operations
that do not use any file handle.
Approved by: kib (mentor)
ip6_input.c, in6.h:
* Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6.
* Always set this flag if HBH Router Alert option is present for MLD,
even when not forwarding.
icmp6.c:
* In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent.
* Use scope ID for verifying input. Do not apply SSM filters here, no inpcb.
* Check for M_RTALERT_MLD when validating MLD traffic, as we can't see
IPv6 hop options outside of ip6_input().
in6_mcast.c:
* Use KAME scope/zone ID in in6_multi.
* Update net.inet6.ip6.mcast.filters implementation to use scope IDs
for comparisons.
* Fix scope ID treatment in multicast socket option processing.
Scope IDs passed in from userland will be ignored as other less
ambiguous APIs exist for specifying the link.
* Tighten userland input checks in IPv6 SSM delta and full-state ops.
* Source filter embedded scope IDs need to be revisited, for now
just clear them and ignore them on input.
* Adapt KAME behaviour of looking up the scope ID in the default zone
for multicast leaves, when the interface is ambiguous.
mld6.c:
* Tighten origin checks on MLD traffic as per RFC3810 Section 6.2:
* ip6_src MAY be the unspecified address for MLDv1 reports.
* ip6_src MAY have link-local address scope for MLDv1 reports,
MLDv1 queries, and MLDv2 queries.
* Perform address field validation *before* accepting queries.
* Use KAME scope/zone ID in query/report processing.
* Break const correctness for mld_v1_input_report(), mld_v1_input_query()
as we temporarily modify the input mbuf chain.
* Clear the scope ID before handoff to userland MLD daemon.
* Fix MLDv1 old querier present timer processing.
With the protocol defaults, hosts should revert to MLDv2 after 260s.
* Add net.inet6.mld.v1enable sysctl, default to on.
ifmcstat.c:
* Use sysctl by default; -K requests kvm(3) if so compiled.
mld.4:
* Connect man page to build.
Tested using PCS.
and jail_get(2). Jail(8) can now create jails using a "name=value"
format instead of just specifying a limited set of fixed parameters; it
can also modify parameters of existing jails. Jls(8) can display all
parameters of jails, or a specified set of parameters. The available
parameters are gathered from the kernel, and not hard-coded into these
programs.
Small patches on killall(1) and jexec(8) to support jail names with
jail_get(2).
Approved by: bz (mentor)
are specifically used by the experimental nfsv4 subsystem.
nfscbd - The NFSv4 client callback daemon.
nfsuserd - The NFSv4 daemon that maps between user and group name
and their corresponding uid/gid numbers.
nfsdumpstate - A utility that dumps out the NFSv4 Open/Lock state.
nfsrevoke - Administratively revokes an NFSv4 client, releasing all
NFSv4 Open/Lock state it holds on the server.
Approved by: kib (mentor)
timer with a <0.05 second delta next to it.
This is done by avoiding the possibility of updating the first residual
time delta in the timer list to zero.
PR: 102747
Submitted by: Sergey Zaharchenko - doublef-ctm at yandex dot ru
MFC after: 3 weeks
This includes the addition of a new flag "-4" that will force
use of the experimental server with nfsv4 support in it. This
commit also adds two new man pages to the repository that are
NFSv4 specific. One describes the file used by the server to
restart nfsv4 services safely. The other is a brief overview
of nfsv4 and its setup.
Reviewed by: dfr
Approved by: kib (mentor)
Upgrade of the tzcode from 2004a to 2009e.
Changes are numerous, but include...
- New format of the output of zic, which supports both 32 and 64
bit time_t formats.
- zdump on 64 bit platforms will actually produce some output instead
of doing nothing for a looooooooong time.
- linux_base-fX, with X >= at least 8, will work without problems related
to the local time again.
The original patch, based on the 2008e, has been running for a long
time on both my laptop and desktop machine and have been tested by
other people.
After the installation of this code and the running of zic(8), you
need to run tzsetup(8) again to install the new datafile.
Approved by: wollman@ for usr.sbin/zic
MFC after: 1 month
asked to verify a passwd file (pwd_mkdb -C).
Entries with oversized usernames are still permitted when building
the passwd database.
When entries are >= MAXLOGNAME in length, they are correctly stored
in passwd, pwd.db and spwd.db but are only correctly retrieved by
getpwent*() and getpwuid*(). getpwnam*() truncates to MAXLOGNAME - 1
when reading from a file (breaking at least sh, tcsh and bash)
and utilities such as su(1) check, complain and fail if the
passed name is >= MAXLOGNAME in length.
MFC after: 3 weeks
1. In several places make sure that the mtree database is not empty using
the -s argument to test instead of -f. (I thought I'd already changed this,
but obviously not.)
2. When deriving the list of changed files use a colon-delimited list.
3. If the list of changed files is empty, unset the variable, and test
for a non-empty CHANGED in diff_loop() before entering that routine.
Enhance the speed of the -U option by using an internal case statement
instead of echoing the variable to an external grep for every file.
Fix indentation on one line.
import from p4 bms_netdev. Summary of changes:
* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.
NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.
This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.
so that a ppp running in `receiver' (server) mode can properly
update routes, for example to update the MTU.
Submitted by: loos.br gmail.com (Luiz Otavio O Souza)
PR: bin/130159
PR: kern/125079, kern/122068, bin/126892
MFC after: 3 days
stability, check for gw to be set before adding the flag and the address
to the routing message.
r186308, backed out in r191305, already tried to do that, and in addition
ignore AF_LINK types of gateway addresses to work around a problem that
r167797 had introduced on the kernel side always setting RTF_GATEWAY if a
gateway address was passed into the kernel.
The proper solution for this is still under discussion so I am hesitant to
re-add the special AF_LINK treatment for now.
MFC after: 3 days
in case of AF_LINK, which the kernel still returns for an RTAX_GATEWAY
as an empty sockaddr_dl in the classic tun<n> case.
Copying the address into the message payload, but not the RTA_GATEWAY
flag results in rt_xaddrs() in the kernel tripping over that and parsing
the next attribute set with a flag, i.e. RTA_NETMASK, with the gateway
address, resulting in bogus route entry.
MFC after: 3 days
registers.
- Cleanup PCI-X capability printf to not leave a dangling "supports" for
some PCI-X bridges.
- Display additional PCI express details including the negotiated and max
link width and the actual and maximum supported max payload.
MFC after: 1 month
we were not properly handling proxy arp. Make sure we (try to) add
the proxy arp entry/entries in this case as well.
PR: bin/131250
Submitted by: loos.br gmail.com (Luiz Otavio O Souza)
MFC after: 3 days
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).
If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.
Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
lists.
- Don't exit with a zero status code when no jails are configured
on a system.
- Style: simplify some code constructs.
- If a single jail cannot be found, let the caller print a nicer
diagnostic message.
Reviewed by: bz
MFC after: 3 days
(1) phttpget is attempting to download enough files that it can't send
all the requests at once, and
(2) the remote server forcibly closes the connection, resulting in RST
packets being sent,
phttpget will receive a SIGPIPE and terminate without downloading all
of the files.
This is probably responsible for a number of hard-to-reproduce errors
with portsnap and freebsd-update.
MFC after: 3 days
2. Sort the command line options to match how they are displayed
in usage()
3. Change references to cvs to the more generic "version control system"
and remove the .Xr for cvs
4. Consistently use ".Op Fl" to refer to command line options in the text.
5. Only use the apostrophe to indicate possession.
6. Add FREEBSD_ID (-F) to the list of variables in the example rc,
and change the DIFF_OPTIONS example to -Bb since -F now covers it.
In particular, vendor sources that aren't ready for gnu99 should
still be compiled with gnu89. (Before r189824, these would have
generated warnings if you tried to compile them in gnu99 mode,
but the warnings went unheeded due to -Wno-error.)
1. The new mtree file should be created in the "host" system /tmp
2. The existing mtree file in the "host" system should not be deleted
Submitted by: scf
Firmware upgraded to 7.1.0 (from 5.0.0).
T3C EEPROM and SRAM added; Code to update eeprom/sram fixed.
fl_empty and rx_fifo_ovfl counters can be observed via sysctl.
Two new cxgbtool commands to get uP logic analyzer info and uP IOQs
Synced up with Chelsio's "common code" (as of 03/03/09)
Submitted by: Navdeep Parhar at Chelsio
Reviewed by: gnn
MFC after: 2 weeks
IPv4 stack.
Diffs are minimized against p4.
PCS has been used for some protocol verification, more widespread
testing of recorded sources in Group-and-Source queries is needed.
sizeof(struct igmpstat) has changed.
__FreeBSD_version is bumped to 800070.
ports tree so that programs use libusb from the base by default. Thanks to
Stanislav Sedov for sorting out the ports build.
Bump __FreeBSD_version to 800069
Help and testing by: stas
Because of integer promotion, Clang doesn't allow ANSI prototypes to be
mixed with K&R declarations.
Submitted by: Pawel Worach <pawel worach gmail com>
the devfs clone handler to open the (invisible) devices on the fly.
The /dev entries are layed out as follows,
/dev/usbctl = master device
/dev/usb/0.1.0.5 = usb device, (<bus>.<dev>.<iface>.<endpoint>)
/dev/ugen0.1 -> usb/0.1.0.0 = ugen link to ctrl endpoint
This also removes the custom permissions model from USB. Bump
__FreeBSD_version to 800066.
Submitted by: rink (earlier version)
The function pow() in libmp(3) clashes with pow(3) in libm. We could
rename this single function, but we can just take the same approach as
the Solaris folks did, which is to prefix all function names with mp_.
libmp(3) isn't really popular nowadays. I suspect not a single
application in ports depends on it. There's still a chance, so I've
increased the SHLIB_MAJOR and __FreeBSD_version.
Reviewed by: deischen, rdivacky
values like 0x80 or 0x40 into a uint8_t foo:1 bitfield. This would
result in the bit always being 0. One of these caused a warning for
overflow (one that was 0x80), but the other didn't. They were both
wrong.
This is why I hate code that mixes c struct bitfields and #defines.
The rest of the fields accessed by the program should be audited.
struct passwd. This is not the case when sizeof(unsigned long) !=
sizeof(time_t). Write a dinky function to do the assignment instead
of relying on the punning. This does slow things down a little (1
extra function call, 11 pointer or int assignments), but is much safer
and machines have been fast enough since the mid 1990s that nobody
will notice the difference.
time_t is a 64-bits int on arm and mips. Before this change, arm was
silently broken. I guess there aren't that many ARM machines running
master YP domain servers. :)
The client side doesn't assume this type punning, so it doesn't need
to be fixed.
* Retire the old 'ifmcstat <kernel>' usage.
* Print AF_LINK records even if run against KVM.
This makes the KVM backend consistent with the sysctl backend.
* Suppress printing of link-layer group records by default.
* Add a -v switch to allow link-layer groups to be printed.
* If compiled without INET6 support, actually work.
* If compiled with INET6 support, print the scope ID of
all IPv6 addresses in both backends.
* Update man page.
* Update copyrights.
With this change, it is now reasonable to retire netstat -g.
Most of the SSM related gunk in this file will require later refactoring.
MFC after: 2 weeks
to print the network-layer endpoint address of the
group membership, rather than its link-layer mapping
as intended.
The KVM path is not affected.
MFC after: 1 week
Add two new functions to the libusb20 API and required kernel ioctls.
- libusb20_dev_get_iface_desc
- libusb20_dev_get_info
New command to usbconfig, "show_ifdrv", which will print out the kernel driver
attached to the given USB device aswell.
See "man libusb20" for a detailed description.
Some minor style corrections long-line wrapping.
Submitted by: Hans Petter Selasky
Just like the old TTY layer, the current MPSAFE TTY layer does not make
any attempt to serialize calls of write(). Data is copied into the
kernel in 256 (TTY_STACKBUF) byte chunks. If a write() call occurs at
the same time, the data may interleave. This is especially likely when
the TTY starts blocking, because the output queue reaches the high
watermark.
I've implemented this by adding a new flag, TTY_BUSY_OUT, which is used
to mark a TTY as having a thread stuck in write(). Because I don't want
non-blocking processes to be possibly blocked by a sleeping thread, I'm
still allowing it to bypass the protection. According to this message,
the Linux kernel returns EAGAIN in such cases, but I think that's a
little too restrictive:
http://kerneltrap.org/index.php?q=mailarchive/linux-kernel/2007/5/2/85418/thread
PR: kern/118287
When we leave the console TTY constantly open, we never reset the
termios attributes. This causes output processing, echoing, etc. not to
be reset to the proper values when going into single user mode after the
system has booted. It also causes nl-to-crnl-conversion not to take
place during shutdown, which causes a `staircase effect'.
This patch adds a new TTY flag, TF_OPENED_CONS, which is set when the
TTY is opened through /dev/console. Because the flags are only used by
the kernel and the pstat(8) utility, I've decided to renumber the TTY
flags. This shouldn't be an issue, because the TTY layer is not yet part
of a stable release.
Reported by: Mark Atkinson <atkin901 yahoo com>
Tested by: sepotvin
device. The details include the current value of the BAR (including all
the flag bits and the current base address), its length, and whether or not
it is enabled. Since this operation is not invasive, non-root users are
allowed to use it (unlike manual config register access which requires
root). The intention is that userland apps (such as Xorg) will use this
interface rather than dangerously frobbing the BARs from userland to
obtain this information.
- Add a new sub-mode to the 'list' mode of pciconf. The -b flag when used
with -l will now list all the active BARs for each device.
MFC after: 1 month
This ensures that the value written is both compatible with
older mtree versions (which expect the value after the period
to be an integer count of nanoseconds after the whole second)
and is a correct floating-point value.
Leave the parsing code unchanged so it will continue to read
older files.
Bluetooth Network Access Point (NAP), Group Ad-hoc Network (GN) and
Personal Area Network User (PANU) profiles.
Obtained from: NetBSD
MFC after: 1 month
o add net80211 support for a tdma vap that is built on top of the
existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
conceivable other devices might be capable of this too in which case
they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
configure, new statistics in athstats, and new debug mask bits
While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.
Sponsored by: Intel
+ check a possible buffer overflow when creating a temp file,
submitted by Christoph Mallon
+ remove stale struct definitions
+ clarify the use of dflag and remove useless checks
MFC after: 3 days
typos and reference the kernel file which processes this info.
All in all, the content of this file should be moved to kldxref.c
or to the kld(4) manpage.
MFC after: 3 days
ARCHSTRING into the new MM_MAKE variable.
We only need to check for the presence of the target of $PAGER
if that variable is actually set. [1]
Pointed out by: Steve Kargl <sgk@troutmask.apl.washington.edu> [1]
====================
1. List the command line options in a more standard way
2. Improve the explanations of some of the arguments (-A, -D)
3. Add ARCHSTRING and MTREEDB to the example rc file
4. Re-sort some of the examples according to the existing distinction
of "has a command line version" vs. "does not have a command line version"
Document changes for r186678
===========================
1. /usr/src/etc -> /usr/src where needed [1]
2. Add IGNORE_FILES to the example rc [2] (and remove IGNORE_MOTD)
3. Update the EXIT STATUS section for [3] and [4]
Update Copyright and .Dd accordingly
PR: bin/96528 [1]
Submitted by: ru [1]
PR: bin/106642 [2]
Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk>
PR: bin/122282 [3]
Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru> [3]
PR: bin/108183 [4]
Submitted by: Riccardo Torrini <riccardo@torrini.org> [4]
=======================
1. Various improvements to the mtree (-U) feature:
a. Seperate the notion of directory and file (user can override db path)
b. Only check for the existence of the mtree file if -U is set
c. Use mktemp to create the new version of the file
d. More safely install the new file
e. Standardize error messages a bit
2. Remove the last of the MAKEDEV stuff (RIP)
New Features
============
1. Switch to using the top level (e.g., /usr/src) Makefile, and specify
that we should use the *.mk files from the source directory instead of
the installed versions. [1][2] This allows easier cross builds and
simplifies (or in some cases permits) upgrading.
2. Check for the deprecated 'nodev' option in /etc/fstab [3]
3. Add support for the IGNORE_FILES variable [4] and deprecate IGNORE_MOTD
accordingly.
4. Before installing a file check to make sure that the target does not
already exist as a directory [5]
5. Check to be sure that the file installed and error out if not
PR: bin/96528 [1]
Submitted by: ru [1]
PR: bin/129639 [2]
Submitted by: sam [2]
PR: bin/122282 [3]
Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru> [3]
PR: bin/106642 [4]
Submitted by: Henrik Brix Andersen <henrik@brixandersen.dk> [4]
PR: bin/108183 [5]
Submitted by: Riccardo Torrini <riccardo@torrini.org> [5]
that differ only by VCS Id) for the following reasons:
1. It was added without my consent, review, or even a heads up
2. It is something that I've repeatedly said I do not want, and certainly
do not want as the default
3. It is poorly implemented (much too complex, produces false positives
e.g., /etc/mail/helpfile)
Given that this is a situation that comes up very infrequently (usually
only for a major version upgrade) and can usually be handled simply
enough on a one-off basis, I will once again point out that I think
this is a Bad Idea. I would be willing to consider a better implementation
as an option that is off by default.
is, consistently call it the boot manager, and switch the order the
options are presented so no boot manager is first in the list (and
hence more or less the default).
This area will probably be rototilled more before 8.0 comes out.
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Add libauditd build parts and add to auditd's linkage;
force libbsm to build before libauditd.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This buge.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
Now the NDISulator supports NDIS USB drivers that it've tested with
devices as follows:
- Anygate XM-142 (Conexant)
- Netgear WG111v2 (Realtek)
- U-Khan UW-2054u (Marvell)
- Shuttle XPC Accessory PN20 (Realtek)
- ipTIME G054U2 (Ralink)
- UNiCORN WL-54G (ZyDAS)
- ZyXEL G-200v2 (ZyDAS)
All of them succeeded to attach and worked though there are still some
problems that it's expected to be solved.
To use NDIS USB support, you should rebuild and install ndiscvt(8) and
if you encounter a problem to attach please set `hw.ndisusb.halt' to
0 then retry.
I expect no changes of the NDIS code for PCI, PCMCIA devices.
Obtained from: //depot/projects/ndisusb/...
1. The "route" command allows route insertion through the interface-direct
option "-iface". During if_attach(), an sockaddr_dl{} entry is created
for the interface and is part of the interface address list. This
sockaddr_dl{} entry describes the interface in detail. The "route"
command selects this entry as the "gateway" object when the "-iface"
option is present. The "arp" and "ndp" commands also interact with the
kernel through the routing socket when adding and removing static L2
entries. The static L2 information is also provided through the
"gateway" object with an AF_LINK family type, similar to what is
provided by the "route" command. In order to differentiate between
these two types of operations, a RTF_LLDATA flag is introduced. This
flag is set by the "arp" and "ndp" commands when issuing the add and
delete commands. This flag is also set in each L2 entry returned by the
kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
in the fields for a "rtm" object, which is reinjected into the kernel by
a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
is a prefix route, so the RTF_LLDATA flag must be specified when issuing
the RTM_ADD/DELETE messages.
2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
specification for retrieving L2 information. Also optimized the
code logic.
Reviewed by: julian
regenerated in libugidfw) rather than simply printing that the rule was
added with only the number. This makes ugidfw(8) behave a bit more like
ipfw(8), and also means that the administrator sees how the rule was
interpreted once uids/gids/etc were processed.
Obtained from: TrustedBSD Project
For example, ^C (SIGINT) may leave the drive spinning and locked.
This may also happen if you try to write a too-large image to a disc
and burncd(8) exits with an I/O error.
Add signal handling by doing a CDRIOCFLUSH ioctl to attempt to leave
burner in a sane state when burning is interrupted with SIGHUP, SIGINT,
SIGTERM, or in case an I/O error occurs during write.
Note, that blanking will still continue after interrupt but it seems to
finish correctly even after burncd(8) has quit.
Also, while I'm here bump WARNS to "6".
PR: 48730
Submitted by: Jaakko Heinonen <jh@saunalahti.fi>
install a p2p host route between the end points. The ppp module
upates this router based on user configuration later on. The
rt_Update() seems to always set the RTF_GATEWAY flag, which is
broken.