Upgrade to the latest version of mtree from NetBSD. This revision
re-removes the printing of size for non-regular files, supports
type-less root (.) entries as seen in a couple ports, and corrects a bug
in -N that caused expanded Subversion $FreeBSD$ strings in comments to
be processed as /etc/group entries.
Includes one trivial portability fix (including <stdint.h> in three
files) that has been committed upstream.
Approved by: re (glebius)
Enable the automatic creation of a certificate (if one does not exists)
and enable the usage by sendmail if sendmail is enabled.
Reviewed by: gshapiro
Approved by: re (gjb)
Add support for "first boot" rc.d scripts.
Document this new functionality in rc.conf(5) and rc(8).
Bump __FreeBSD_version so that ports can make use of this.
Approved by: re (gjb)
- Fix jail_parallel_start="YES".
- Fix ip[46].addr when interface parameter is not defined.
- Fix a bug which prevented jails from starting when $jail_conf was used and
no jail name was specified.
- Display error messages when start/stop fails.
Approved by: re (glebius)
Add a new capability, VM_CAP_ENABLE_INVPCID, that can be enabled to expose
'invpcid' instruction to the guest. Currently bhyve will try to enable this
capability unconditionally if it is available.
Consolidate code in bhyve to set the capabilities so it is no longer
duplicated in BSP and AP bringup.
Add a sysctl 'vm.pmap.invpcid_works' to display whether the 'invpcid'
instruction is available.
Approved by: re (hrs)
Move the resource allocation from the ata_*_probe section to the ata_*_attach
section. This prevents a boot crash on nearly all iMacs and PowerMacs/Books.
The allocation in the probe section was working before because ata_probe was
returning 0 which did not invoke a second DEVICE_PROBE. Now it returns
a BUS_PROBE_DEFAULT which can invoke a second DEVICE_PROBE which results in
a "failed to reserve resource" exit.
PR: powerpc/182978
Approved by: re(gjb)
Update krping to the latest upstream code. Move all the FreeBSD
specific parts to krping_dev.c, which leaves the other files as
close to their upstream versions as possible.
Approved by: re (glebius)
The Xen userland event channel driver isn't complete. Disabled it
from the kernel build until it is ready.
sys/conf/files:
Remove the entry for xen/evtchn/evtchn_dev.c so it is not included
in any kernel builds.
Noticed by: smh
Approved by: re (hrs)
------------------------------------------------------------------------
Delete all of the old RDMA code (except krping, which was switched to
use sys/ofed some time back). This has been sitting around as dead code
in the tree for a very long time.
Approved by: re (hrs)
r256694:
iw_cxgbe: iWARP driver for Chelsio T4/T5 chips. This is a straight port
of the iw_cxgb4 found in OFED distributions.
r256713:
iw_cxgbe should have a dependency on t4nex.
r256714:
Fix typo in previous commit.
Approved by: re (hrs)
The order of releasing resources in mlxen was wrong, which caused
panic on reload of the module.
MFC: 256682
Submitted by: Shahar Klein (shahark at mellanox.com)
Approved by: re
cxgbe(4): Store the log2 of the # of doorbells per BAR2 page for both
ingress and egress queues, and for both T4 and T5. These values are
used by the T4/T5 iWARP driver.
Approved by: re (glebius)
Centralize the detection logic for the Hyper-V hypervisor.
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs, grehan
Approved by: re (gjb)
sys/sys/systm.h:
* Add a new VM_GUEST type, VM_GUEST_HV (HyperV guest).
sys/dev/hyperv/vmbus/hv_vmbus_drv_freebsd.c:
sys/dev/hyperv/vmbus/hv_hv.c:
sys/dev/hyperv/stordisengage/hv_ata_pci_disengage.c:
* Set vm_guest to VM_GUEST_HV and use that on other HyperV related
devices instead of cloning the cpuid hypervisor check.
* Cleanup the vmbus_identify function.
------------------------------------------------------------------------
Centralize the detection logic for the Hyper-V hypervisor.
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs, grehan
Approved by: re (gjb)
sys/sys/systm.h:
* Add a new VM_GUEST type, VM_GUEST_HV (HyperV guest).
sys/dev/hyperv/vmbus/hv_vmbus_drv_freebsd.c:
sys/dev/hyperv/vmbus/hv_hv.c:
sys/dev/hyperv/stordisengage/hv_ata_pci_disengage.c:
* Set vm_guest to VM_GUEST_HV and use that on other HyperV related
devices instead of cloning the cpuid hypervisor check.
* Cleanup the vmbus_identify function.
Eliminate unconditional debug printfs.
Linux writes to these nominally read-only registers,
so avoid having bhyve write warning messages to stdout
when the reg writes can be safely ignored. Change the
WPRINTF to DPRINTF which is conditional.
Approved by: re (delphij)
Eliminate unconditional debug printfs.
Linux writes to these nominally read-only registers,
so avoid having bhyve write warning messages to stdout
when the reg writes can be safely ignored. Change the
WPRINTF to DPRINTF which is conditional.
Approved by: re (gjb)
Add executable bit to docsinstall [old] and entropy [new] scripts.
MFC r256541:
Document BSDINSTALL_TMPBOOT environment variable introduced by SVN r256343.
Approved by: re (gjb)
- Normalize jailname. "example.com" is converted to "example_com".
- Fix a bug that some $jail_{jname}_foo variables did not work.
- Fix a bug which prevented $jail_devfs_ruleset from working[1].
- Move $jail_parameters to the last of the configuraiton lines[1].
- Fix "ifname|addr" syntax support in jail_{jname}_ip.
- Create /var/run/jail_{jname}.id because ezjail-admin depends on it.
Reported by: jase [1]
Approved by: re (gjb)
Fix the witness warning that warned against calling uiomove() while holding
the 'vmmdev_mtx' in vmmdev_rw().
Rely on the 'si_threadcount' accounting to ensure that we never destroy the
VM device node while it has operations in progress (e.g. ioctl, mmap etc).
Approved by: re (rodrigc)
Sanitize the %eflags returned by BIOS routines. Some BIOS routines enter
protected mode and may leave protected-mode-specific flags like PSL_NT set
when they return to real mode. This can cause a fault when BTX re-enters
protected mode after the BIOS mode returns.
Approved by: re (gjb)
There is an issue (not seen in our testing) where "yarrow" and
"dummy" switch priorities, and the users are left with no usable
/dev/random. The fix assigns priories to these and gives the users
what they want. The override tuneable has a stupid name (blame me!)
and this fixes it to be something that 'sysctl kern.random' emits
and is the right thing to set.
Approved by: re (gjb)
Approved by: secteam (cperciva)
Implement the virtio block 'get-ident' operation. This eliminates the
annoying verbose boot error of the form
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
The ident returned by bhyve is a text string 'BHYVE-XXXX-XXXX', where
the X's are the first bytes of the md5 hash of the backing filename.
Approved by: re (gjb)
- Add mount.fdescfs parameter to jail(8). This is similar to
mount.devfs but mounts fdescfs. The mount happens just after
mount.devfs.
- rc.d/jail now displays whole error message from jail(8) when a jail
fails to start.
Approved by: re (gjb)
Refactor of /dev/random device. Main points include:
* Userland seeding is no longer used. This auto-seeds at boot time
on PC/Desktop setups; this may need some tweeking and intelligence
from those folks setting up embedded boxes, but the work is believed
to be minimal.
* An entropy cache is written to /entropy (even during installation)
and the kernel uses this at next boot.
* An entropy file written to /boot/entropy can be loaded by loader(8)
* Hardware sources such as rdrand are fed into Yarrow, and are no
longer available raw.
------------------------------------------------------------------------
r256240 | des | 2013-10-09 21:14:16 +0100 (Wed, 09 Oct 2013) | 4 lines
Add a RANDOM_RWFILE option and hide the entropy cache code behind it.
Rename YARROW_RNG and FORTUNA_RNG to RANDOM_YARROW and RANDOM_FORTUNA.
Add the RANDOM_* options to LINT.
------------------------------------------------------------------------
r256239 | des | 2013-10-09 21:12:59 +0100 (Wed, 09 Oct 2013) | 2 lines
Define RANDOM_PURE_RNDTEST for rndtest(4).
------------------------------------------------------------------------
r256204 | des | 2013-10-09 18:51:38 +0100 (Wed, 09 Oct 2013) | 2 lines
staticize struct random_hardware_source
------------------------------------------------------------------------
r256203 | markm | 2013-10-09 18:50:36 +0100 (Wed, 09 Oct 2013) | 2 lines
Wrap some policy-rich code in 'if NOTYET' until we can thresh out
what it really needs to do.
------------------------------------------------------------------------
r256184 | des | 2013-10-09 10:13:12 +0100 (Wed, 09 Oct 2013) | 2 lines
Re-add /dev/urandom for compatibility purposes.
------------------------------------------------------------------------
r256182 | des | 2013-10-09 10:11:14 +0100 (Wed, 09 Oct 2013) | 3 lines
Add missing include guards and move the existing ones out of the
implementation namespace.
------------------------------------------------------------------------
r256168 | markm | 2013-10-08 23:14:07 +0100 (Tue, 08 Oct 2013) | 10 lines
Fix some just-noticed problems:
o Allow this to work with "nodevice random" by fixing where the
MALLOC pool is defined.
o Fix the explicit reseed code. This was correct as submitted, but
in the project branch doesn't need to set the "seeded" bit as this
is done correctly in the "unblock" function.
o Remove some debug ifdeffing.
o Adjust comments.
------------------------------------------------------------------------
r256159 | markm | 2013-10-08 19:48:11 +0100 (Tue, 08 Oct 2013) | 6 lines
Time to eat crow for me.
I replaced the sx_* locks that Arthur used with regular mutexes;
this turned out the be the wrong thing to do as the locks need to
be sleepable. Revert this folly.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (In original diff)
------------------------------------------------------------------------
r256138 | des | 2013-10-08 12:05:26 +0100 (Tue, 08 Oct 2013) | 10 lines
Add YARROW_RNG and FORTUNA_RNG to sys/conf/options.
Add a SYSINIT that forces a reseed during proc0 setup, which happens
fairly late in the boot process.
Add a RANDOM_DEBUG option which enables some debugging printf()s.
Add a new RANDOM_ATTACH entropy source which harvests entropy from the
get_cyclecount() delta across each call to a device attach method.
------------------------------------------------------------------------
r256135 | markm | 2013-10-08 07:54:52 +0100 (Tue, 08 Oct 2013) | 8 lines
Debugging. My attempt at EVENTHANDLER(multiuser) was a failure; use
EVENTHANDLER(mountroot) instead.
This means we can't count on /var being present, so something will
need to be done about harvesting /var/db/entropy/... .
Some policy now needs to be sorted out, and a pre-sync cache needs
to be written, but apart from that we are now ready to go.
Over to review.
------------------------------------------------------------------------
r256094 | markm | 2013-10-06 23:45:02 +0100 (Sun, 06 Oct 2013) | 8 lines
Snapshot.
Looking pretty good; this mostly works now. New code includes:
* Read cached entropy at startup, both from files and from loader(8)
preloaded entropy. Failures are soft, but announced. Untested.
* Use EVENTHANDLER to do above just before we go multiuser. Untested.
------------------------------------------------------------------------
r256088 | markm | 2013-10-06 14:01:42 +0100 (Sun, 06 Oct 2013) | 2 lines
Fix up the man page for random(4). This mainly removes no-longer-relevant
details about HW RNGs, reseeding explicitly and user-supplied
entropy.
------------------------------------------------------------------------
r256087 | markm | 2013-10-06 13:43:42 +0100 (Sun, 06 Oct 2013) | 6 lines
As userland writing to /dev/random is no more, remove the "better
than nothing" bootstrap mode.
Add SWI harvesting to the mix.
My box seeds Yarrow by itself in a few seconds! YMMV; more to follow.
------------------------------------------------------------------------
r256086 | markm | 2013-10-06 13:40:32 +0100 (Sun, 06 Oct 2013) | 11 lines
Debug run. This now works, except that the "live" sources haven't
been tested. With all sources turned on, this unlocks itself in
a couple of seconds! That is no my box, and there is no guarantee
that this will be the case everywhere.
* Cut debug prints.
* Use the same locks/mutexes all the way through.
* Be a tad more conservative about entropy estimates.
------------------------------------------------------------------------
r256084 | markm | 2013-10-06 13:35:29 +0100 (Sun, 06 Oct 2013) | 5 lines
Don't use the "real" assembler mnemonics; older compilers may not
understand them (like when building CURRENT on 9.x).
# Submitted by: Konstantin Belousov <kostikbel@gmail.com>
------------------------------------------------------------------------
r256081 | markm | 2013-10-06 10:55:28 +0100 (Sun, 06 Oct 2013) | 12 lines
SNAPSHOT.
Simplify the malloc pools; We only need one for this device.
Simplify the harvest queue.
Marginally improve the entropy pool hashing, making it a bit faster
in the process.
Connect up the hardware "live" source harvesting. This is simplistic
for now, and will need to be made rate-adaptive.
All of the above passes a compile test but needs to be debugged.
------------------------------------------------------------------------
r256042 | markm | 2013-10-04 07:55:06 +0100 (Fri, 04 Oct 2013) | 25 lines
Snapshot. This passes the build test, but has not yet been finished or debugged.
Contains:
* Refactor the hardware RNG CPU instruction sources to feed into
the software mixer. This is unfinished. The actual harvesting needs
to be sorted out. Modified by me (see below).
* Remove 'frac' parameter from random_harvest(). This was never
used and adds extra code for no good reason.
* Remove device write entropy harvesting. This provided a weak
attack vector, was not very good at bootstrapping the device. To
follow will be a replacement explicit reseed knob.
* Separate out all the RANDOM_PURE sources into separate harvest
entities. This adds some secuity in the case where more than one
is present.
* Review all the code and fix anything obviously messy or inconsistent.
Address som review concerns while I'm here, like rename the pseudo-rng
to 'dummy'.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
------------------------------------------------------------------------
r255319 | markm | 2013-09-06 18:51:52 +0100 (Fri, 06 Sep 2013) | 4 lines
Yarrow wants entropy estimations to be conservative; the usual idea
is that if you are certain you have N bits of entropy, you declare
N/2.
------------------------------------------------------------------------
r255075 | markm | 2013-08-30 18:47:53 +0100 (Fri, 30 Aug 2013) | 4 lines
Remove short-lived idea; thread to harvest (eg) RDRAND enropy into the
usual harvest queues. It was a nifty idea, but too heavyweight.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------
r255071 | markm | 2013-08-30 12:42:57 +0100 (Fri, 30 Aug 2013) | 4 lines
Separate out the Software RNG entropy harvesting queue and thread
into its own files.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------
r254934 | markm | 2013-08-26 20:07:03 +0100 (Mon, 26 Aug 2013) | 2 lines
Remove the short-lived namei experiment.
------------------------------------------------------------------------
r254928 | markm | 2013-08-26 19:35:21 +0100 (Mon, 26 Aug 2013) | 2 lines
Snapshot; Do some running repairs on entropy harvesting. More needs
to follow.
------------------------------------------------------------------------
r254927 | markm | 2013-08-26 19:29:51 +0100 (Mon, 26 Aug 2013) | 15 lines
Snapshot of current work;
1) Clean up namespace; only use "Yarrow" where it is Yarrow-specific
or close enough to the Yarrow algorithm. For the rest use a neutral
name.
2) Tidy up headers; put private stuff in private places. More could
be done here.
3) Streamline the hashing/encryption; no need for a 256-bit counter;
128 bits will last for long enough.
There are bits of debug code lying around; these will be removed
at a later stage.
------------------------------------------------------------------------
r254784 | markm | 2013-08-24 14:54:56 +0100 (Sat, 24 Aug 2013) | 39 lines
1) example (partially humorous random_adaptor, that I call "EXAMPLE")
* It's not meant to be used in a real system, it's there to show how
the basics of how to create interfaces for random_adaptors. Perhaps
it should belong in a manual page
2) Move probe.c's functionality in to random_adaptors.c
* rename random_ident_hardware() to random_adaptor_choose()
3) Introduce a new way to choose (or select) random_adaptors via tunable
"rngs_want" It's a list of comma separated names of adaptors, ordered
by preferences. I.e.:
rngs_want="yarrow,rdrand"
Such setting would cause yarrow to be preferred to rdrand. If neither of
them are available (or registered), then system will default to
something reasonable (currently yarrow). If yarrow is not present, then
we fall back to the adaptor that's first on the list of registered
adaptors.
4) Introduce a way where RNGs can play a role of entropy source. This is
mostly useful for HW rngs.
The way I envision this is that every HW RNG will use this
functionality by default. Functionality to disable this is also present.
I have an example of how to use this in random_adaptor_example.c (see
modload event, and init function)
5) fix kern.random.adaptors from
kern.random.adaptors: yarrowpanicblock
to
kern.random.adaptors: yarrow,panic,block
6) add kern.random.active_adaptor to indicate currently selected
adaptor:
root@freebsd04:~ # sysctl kern.random.active_adaptor
kern.random.active_adaptor: yarrow
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
Submitted by: Dag-Erling Smørgrav <des@FreeBSD.org>, Arthur Mesh <arthurmesh@gmail.com>
Reviewed by: des@FreeBSD.org
Approved by: re (delphij)
Approved by: secteam (des,delphij)
Fix a lock-order reversal in the net driver by dropping the lock
and holding a reference prior to calling further into the hyperv
stack.
Added missing FreeBSD idents.
Approved by: re@ (gjb)
Bring in a new zfsboot auto script for performing automatic setup of a boot
pool (optionally encrypted) with many other options, validations, features.
Originally submitted by Allan Jude; modified in collaboration.
MFC revisions 256325,256330,256345:
Rewrite the keymap selection menu to display keymaps and provide a test
mechanism. Test mechanism originally submitted by Warren Block; modified.
MFC r256347:
Prominently display "Wireless" for each wireless network interface. Part
of PR bin/161547; submitted by Warren Block; slightly modified.
MFC r256348:
Remove the dumpdev configuration dialog, merge it into the regular
services configuration and enable it by default. Originally submitted by
Allan Jude; slightly modified.
PR: bin/161547
Submitted by: Allan Jude, Warren Block <wblock@wonkity.com>
In collaboration with: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
