Commit Graph

158094 Commits

Author SHA1 Message Date
ed
82187ebf44 Fix regressions in return events of poll() on TTYs.
As pointed out, POLLHUP should be generated, even if it hasn't been
specified on input. It is also not allowed to return both POLLOUT and
POLLHUP at the same time.

Reported by:	jilles
Approved by:	re (kib)
2009-07-08 10:21:52 +00:00
brian
446d01edc9 Fix some uninitialise variables.
PR:		136383
Submitted by:	Ulrich Spoerlein - uqs at spoerlein dot net
Approved by:	re (kib)
MFC after:	3 weeks
2009-07-08 10:16:16 +00:00
cperciva
a4c5e4ab3a Add support for using a livefs from a USB disk.
Submitted by:	randi
Approved by:	re (kensmith)
2009-07-08 06:07:51 +00:00
cperciva
f9b9f0286a Refactor code from installFixitCDROM into a new function, fixit_livefs_common.
While doing so, improve style and reword some comments.

This should not result in any functional changes, but the fixit_livefs_common
function will be used by future code.

Submitted by:	randi
Approved by:	re (kensmith)
2009-07-08 06:07:23 +00:00
mav
d6e9263657 Fix kernel panic, when ataahci driver is used on system with increased
MAXPHYS. Current ataahci driver memory allocation scheme includes only
64 items in DMA S/G table, and so not guarantied to support transactions
with more then 252K data.

Approved by:    re (kensmith)
MFC after:      2 weeks
2009-07-08 06:00:21 +00:00
marcel
8fa709769a Revert revisions 188839 and 188868. Use of the ioctl in geom_dev.c
is invalid because the ioctl happens without prior open. The ioctl
got introduced to provide backward compatibility for extended
partitions, but it ended up not being used because it didn't work
as expected. Since there are no consumers of the ioctl and the
implementation is broken, the best fix is to remove the code
entirely.

Spotted by:	phk
Approved by:	re (kensmith)
2009-07-08 05:56:14 +00:00
silby
13615958a8 Increase HZ_VM from 10 to 100. While 10 hz saves cpu time
under VM environments, it's too slow for FreeBSD to work
properly.  For example, ping at 10hz pings about every 600ms
instead of about every second.

Approved by:	re (kib)
2009-07-08 01:09:12 +00:00
sam
145c06379f Fix ar5416 and later parts on big-endian platforms: setup the h/w byte
swizzler using the same technique used everywhere else.

Approved by:	re (kib)
2009-07-07 18:11:05 +00:00
joel
42e7fca302 Fix two typos and sort sysctls.
PR:		docs/136408
Approved by:	re (blanket)
2009-07-07 13:58:47 +00:00
kib
6c6bda868d Fix poll(2) and select(2) for named pipes to return "ready for read"
when all writers, observed by reader, exited. Use writer generation
counter for fifo, and store the snapshot of the fifo generation in the
f_seqcount field of struct file, that is otherwise unused for fifos.
Set FreeBSD-undocumented POLLINIGNEOF flag only when file f_seqcount is
equal to fifo' fi_wgen, and revert r89376.

Fix POLLINIGNEOF for sockets and pipes, and return POLLHUP for them.
Note that the patch does not fix not returning POLLHUP for fifos.

PR:	kern/94772
Submitted by:	bde (original version)
Reviewed by:	rwatson, jilles
Approved by:	re (kensmith)
MFC after:	6 weeks (might be)
2009-07-07 09:43:44 +00:00
kensmith
c59ed917ab Bump for BETA1.
Approved by:	re (implicit)
2009-07-07 00:02:26 +00:00
sam
e6b2ea61e2 Fix AR5416 and later parts when building with AH_DEBUG or similar defined:
always define OS_REG_UNSWAPPED and use it in ath_hal_reg_{read,write}.

Approved by:	re (kib)
2009-07-06 20:51:54 +00:00
joel
0f4464a413 Document the new EQ and VPC features along with a few loader tunables.
Reviewed by:	ariff
Approved by:	re (blanket)
2009-07-06 19:32:13 +00:00
alc
c9ef1e0104 When pmap_change_attr() changes the PAT setting on a kernel mapping, it has
to simultaneously change the PAT setting for the same pages within the
direct map region.  This may require the demotion of a 2MB page mapping and
the allocation of a page table page.  This revision gives the highest
possible priority (VM_ALLOC_INTERRUPT) to this page allocation, so that
pmap_change_attr() is less likely to fail.  (In general, kernel page table
page allocations have the highest priority, so this is not creating a new
precedent.)

(Demotion of 1GB page mappings within the direct map already specifies
VM_ALLOC_INTERRUPT to vm_page_alloc(), so only pmap_demote_pde() must be
changed.)

Approved by:	re (kib)
2009-07-06 18:43:42 +00:00
jhb
19e5186727 After the per-CPU IDT changes, the IDT vector of an interrupt could change
when the interrupt was moved from one CPU to another.  If the interrupt was
enabled, then the old IDT vector needs to be disabled and the new IDT vector
needs to be enabled.  This was mostly masked prior to the recent MSI changes
since in the older code almost all allocated IDT vectors were already enabled
and the enabled vectors on the BSP during boot covered enough of the IDT
range.  However, after the MSI changes, MSI interrupts that were allocated
but not enabled (e.g. DRM with MSI) during boot could result in an allocated
IDT vector that wasn't enabled.  The round-robin at the end of boot could
place another interrupt at the same IDT vector without enabling the IDT
vector causing trap 30 faults.

Fix this by explicitly disabling/enabling the old and new IDT vectors for
enabled interrupt sources when moving an interrupt between CPUs via the
pic_assign_cpu() method.  While here, fix a bug in my earlier changes so
that an I/O APIC interrupt pin is left unchanged if ioapic_assign_cpu()
fails to allocate a new IDT vector and returns ENOSPC.

Approved by:	re (kensmith)
2009-07-06 18:23:00 +00:00
jhb
103e967dee MFi386: Add a 'show idt' command to DDB to display the non-default function
pointers in the interrupt descriptor table.

Approved by:	re (kensmith)
2009-07-06 18:10:27 +00:00
jfv
795d93a682 The new method of reading the mac address from the
RAR(0) register does not work on this old adapter,
provide a local routine that does it the older way.

Approved by:  re
2009-07-06 17:23:48 +00:00
flz
0afab74da0 - pkg_install is maintained by portmgr.
- BSD.x11{,-4}.dist aren't used anymore and BSD.local.dist now lives
in ports/Templates/. Most people apparently missed that move and still
commit to the src copy, so I'll have to remove it eventually but for
now, the MAINTAINERS line can go.

Approved by:	re (kib)
2009-07-06 11:46:18 +00:00
attilio
daff94f8a6 In the current code, rdlock_count is not correctly handled for some cases.
The most notable is that it is not bumped in rwlock_rdlock_common() when
the hard path (__thr_rwlock_rdlock()) returns successfully.
This can lead to deadlocks in libthr when rwlocks recursion in read mode
happens.
Fix the interested parts by correctly handling rdlock_count.

PR:		threads/136345
Reported by:	rink
Tested by:	rink
Reviewed by:	jeff
Approved by:	re (kib)
MFC:		2 weeks
2009-07-06 09:31:04 +00:00
kientzle
629faf0b20 This addresses some issues with my earlier -R fix that
were pointed out by Brooks Davis and Alexey Dokuchaev:
* It now tries to lookup arguments as names first, then tries
   to parse them as numbers.  In particular, this makes the
   behavior consistent with POSIX conventions when usernames
   consist entirely of digits.
* It now uses strtoul() for the numeric parsing.

Finally, I've included an update to the test harness
to exercise the new numeric cases for -R.

Approved by:	re (kib)
2009-07-06 02:02:45 +00:00
alc
8c4633ab62 PAE adds another level to the i386 page table. This level is a small
4-entry table that must be located within the first 4GB of RAM.  This
requirement is met by defining an UMA zone with a custom back-end
allocator function.  This revision makes two changes to this back-end
allocator function: (1) It replaces the use of contigmalloc() with the
use of kmem_alloc_contig().  This eliminates "double accounting", i.e.,
accounting by both the UMA zone and malloc tags.  (I made the same
change for the same reason to the zones supporting jumbo frames a week
ago.) (2) It passes through the "wait" parameter, i.e., M_WAITOK,
M_ZERO, etc. to kmem_alloc_contig() rather than ignoring it.
pmap_init() calls uma_zalloc() with both M_WAITOK and M_ZERO.  At the
moment, this is harmless only because the default behavior of
contigmalloc()/kmem_alloc_contig() is to wait and because pmap_init()
doesn't really depend on the memory being zeroed.

The back-end allocator function in the Xen pmap is dead code.  I am
changing it nonetheless because I don't want to leave any "bad examples"
in the source tree for someone to copy at a later date.

Approved by:	re (kib)
2009-07-05 21:40:21 +00:00
sam
e0b82863b7 catchup with action+ageq additions
Submitted by:	"Paul B. Mahol" <onemda@gmail.com>
Approved by:	re (implicit)
2009-07-05 21:19:10 +00:00
sam
e99c2a4f22 add missing bit of r195379
Approved by:	re (kensmith)
2009-07-05 20:44:50 +00:00
pjd
fb7ddfc9fe - Don't suggest opening file for writing in preparation for fexecve(2).
- execve(2)/fexecve(2) won't return ETXTBSY if file is open for reading.

Approved by:	re (kib)
2009-07-05 20:20:09 +00:00
sam
9f7eae50be Add ieee80211_ageq; a facility for staging packets that require
long-term work before they can be serviced.  Packets are tagged and
assigned an age (in seconds) at the point they are added to the
queue.  If a packet is not retrieved before it's age expires it is
reclaimed.  Tagging can take two forms: a reference to an ieee80211_node
(as happens in the tx path) or an opaque token in cases where there
is no reference or the node structure is not stable (i.e. it's going
to be destroyed).

o add ic_stageq to replace the per-node wds staging queue used for
  dynamic wds
o add ieee80211_mac_hash for building ageq tokens; this computes a
  32-bit hash from an 802.11 mac address (copied from the bridge)
o while here fix a stray ';' noticed in IEEE80211_PSQ_INIT

Reviewed by:	rpaulo
Approved by:	re (kensmith)
2009-07-05 18:17:37 +00:00
ariff
488931f6d9 - Increase dynamic range of filter coefficients from 28bit to 30bit.
This cause dramatic effect in overall precision and conversion quality
  by pushing down most aliasing artifacts around -180 dB.

  Spectrogram analysis/comparison:

  	http://people.freebsd.org/~ariff/z_comparison/z_28vs30/

- Guard against possible 64bit overflow during accumulation process by
  slightly normalize and saturate sample and coefficient multiplication,
  possible during extreme 32bit downsampling (eg. 380KHz -> 8KHz) with
  custom preset that require more than ~7000 taps filter (which is
  overkill).

- Add knobs through FEEDER_RATE_PRESETS to set dynamic range of filter
  coefficients/accumulator and prefered polynomial interpolator:

  	COEFFICIENT_BIT:X
	(where 1 <= X <= 30, default: 30)

	ACCUMULATOR_BIT:X
	(where 32 <= X <=64, default: 58)

	INTERPOLATOR:I
	(where I = ZOH, LINEAR, QUADRATIC, HERMITE, BSPLINE,
 	           OPT32X, OPT16X, OPT8X, OPT4X, OPT2X)

Approved by:	re (kib)
2009-07-05 18:15:06 +00:00
sam
edf89f7162 Revamp 802.11 action frame handling:
o add a new facility for components to register send+recv handlers
o ieee80211_send_action and ieee80211_recv_action now use the registered
  handlers to dispatch operations
o rev ieee80211_send_action api to enable passing arbitrary data
o rev ieee80211_recv_action api to pass the 802.11 frame header as it may
  be difficult to locate
o update existing IEEE80211_ACTION_CAT_BA and IEEE80211_ACTION_CAT_HT handling
o update mwl for api rev

Reviewed by:	rpaulo
Approved by:	re (kensmith)
2009-07-05 17:59:19 +00:00
sam
c67dff7aca Cleanup ALIGNED_POINTER:
o add to platforms where it was missing (arm, i386, powerpc, sparc64, sun4v)
o define as "1" on amd64 and i386 where there is no restriction
o make the type returned consistent with ALIGN
o remove _ALIGNED_POINTER
o make associated comments consistent

Reviewed by:	bde, imp, marcel
Approved by:	re (kensmith)
2009-07-05 17:45:48 +00:00
brian
eeddcf1cf5 Add a missing phrase.
Submitted by:	Jason McIntyre jmc at kerhand dot co dot uk
Approved by:	re (kib)
Obtained from:	OpenBSD
MFC after:	3 weeks
2009-07-05 16:55:57 +00:00
trasz
5c4282d36a When the kernel is configured without "options FFS", build UFS as a module
without requiring any special build flags.

Approved by:	re (kib)
2009-07-05 15:25:02 +00:00
mav
371f49c177 Mark atanvidia depending on ataahci since rev.188846.
Approved by:	re (kib)
2009-07-05 14:50:45 +00:00
ivoras
04b7cb345c Add missing reference to GPT support.
Submitted by:	Paul B. Mahol onemda at gmail.com
Approved by:	re (kib)
2009-07-05 14:03:41 +00:00
brian
9a39c9fe40 Disable r194497 for now. It doesn't work well with ports-mgmt/tinderbox.
Approved by:	re (ken)
2009-07-05 06:14:59 +00:00
attilio
d483a0f67c Add a new options (-s) that, when specified, skips the question about
adjusting the clock to UTC.
That avoids to write on /etc/wall_cmos_clock which is useful in some
cases (example: host user in a jail).

Sponsored by:	Sandvine Incorporated
Initially submitted by:	Matt Koivisto <mkoivisto at sandvine dot com>
Approved by:	re (kib)
2009-07-04 11:11:21 +00:00
kib
af8ce5a988 When forking a vm space that has wired map entries, do not forget to
charge the objects created by vm_fault_copy_entry. The object charge
was set, but reserve not incremented.

Reported by:	Greg Rivers <gcr+freebsd-current tharned org>
Reviewed by:	alc (previous version)
Approved by:	re (kensmith)
2009-07-03 22:17:37 +00:00
rpaulo
ea30121075 acpi_hp.c:
- sysctl dev.acpi_hp.0.verbose to toggle debug output
- A modification so this can deal with different array lengths
  when reading the CMI BIOS - now it works ok on HP Compaq nx7300
  as well.
- Change behaviour to query only max_instance-1 CMI BIOS instances,
  because all HPs seen so far are broken in that respect
  (or there is a fundamental misunderstanding on my side, possible
  as well). This way a disturbing ACPI Error Field exceeds Buffer
  message is avoided.
- New bit to set on dev.acpi_hp.0.cmi_detail (0x8) to
  also query the highest guid instance of CMI bios

acpi_hp.4:
- Document dev.acpi_hp.0.verbose sysctl in man page
- Document new bit for dev.acpi_hp.0.cmi_detail
- Add a section to manpage about hardware that has been reported
  to work ok

Submitted by:	Michael Gmelin <freebsdusb at bindone.de>
Approved by:	re (kib)
MFC after:	2 weeks
2009-07-03 21:12:37 +00:00
kientzle
49230574bc This fixes bsdcpio's -R option to accept numeric
user or group Ids as well as user or group names.
In particular, this fixes freesbie2, which uses
-R 0:0 to copy a bunch of files so that the result
will be owned by root.

Also fixes a related bug that mixed-up the uid
and gid specified by -R when in passthrough mode.

Thanks to Dominique Goncalves for reporting this
regression.

Approved by:	re (kib)
2009-07-03 17:54:33 +00:00
trasz
7ce4ab7ff8 Fix fpathconf(3) on fifos, in effect making ls(1) properly
display '+' on them.  Taken from kern/125613, with cosmetic
changes.

PR:		kern/125613
Submitted by:	Jaakko Heinonen <jh at saunalahti dot fi>
Approved by:	re (kib)
2009-07-02 20:05:21 +00:00
ed
f11b84cef6 Enable POSIX semaphores on all non-embedded architectures by default.
More applications (including Firefox) seem to depend on this nowadays,
so not having this enabled by default is a bad idea.

Proposed by:	miwi
Patch by:	Florian Smeets <flo kasimir com>
Approved by:	re (kib)
2009-07-02 18:24:37 +00:00
kib
350f96b4bf In vn_vget_ino() and their inline equivalents, mnt_ref() the mount point
around the sequence that drop vnode lock and then busies the mount point.
Not having vlocked node or direct reference to the mp allows for the
forced unmount to proceed, making mp unmounted or reused.

Tested by:	pho
Reviewed by:	jeff
Approved by:	re (kensmith)
MFC after:	2 weeks
2009-07-02 18:02:55 +00:00
rwatson
9055b3da21 Create audit records for AUE_POSIX_OPENPT, currently w/o arguments.
Approved by:	re (audit argument blanket)
2009-07-02 16:33:38 +00:00
jamie
c0264518e9 Call prison_check from vfs_suser rather than re-implementing it.
Approved by:	re (kib), bz (mentor)
2009-07-02 14:19:33 +00:00
ariff
c7f054429b Slightly increase amount of bandwidth of resampling filter for
feeder_rate_quality=3. This have the benefit of reducing aliasing
artifacts due to alias masking.

Spectrogram analysis:

 o Old preset (100:36:0.90)
	http://people.freebsd.org/~ariff/z_comparison/z_q3_old.png

 o New preset (100:36:0.92):
	http://people.freebsd.org/~ariff/z_comparison/z_q3_new.png

Approved by:	re (kib)
2009-07-02 10:02:10 +00:00
rwatson
337f389926 Fix comment misthink.
Submitted by:	b. f. <bf1783 at googlemail.com>
Approved by:	re (audit argument blanket)
MFC after:	1 week
2009-07-02 09:50:13 +00:00
rwatson
5260e3a73c Audit file descriptor and command arguments to ioctl(2).
Approved by:	re (audit argument blanket)
MFC after:	1 week
2009-07-02 09:16:25 +00:00
rwatson
b803771ae1 Clean up a number of aspects of token generation from audit arguments to
system calls:

- Centralize generation of argument tokens for VM addresses in a macro,
  ADDR_TOKEN(), and properly encode 64-bit addresses in 64-bit arguments.
- Fix up argument numbers across a large number of syscalls so that they
  match the numeric argument into the system call.
- Don't audit the address argument to ioctl(2) or ptrace(2), but do keep
  generating tokens for mmap(2), minherit(2), since they relate to passing
  object access across execve(2).

Approved by:	re (audit argument blanket)
Obtained from:	TrustedBSD Project
MFC after:	1 week
2009-07-02 09:15:30 +00:00
delphij
7d633c8984 Use MPT_MAX_LUNS as maximium number of LUNs, not 7, for SAS and FC cases.
This matches Linux driver behavior.

Discussed with:	scottl
Approved by:	re (kensmith)
MFC after:	1 month
2009-07-02 00:43:10 +00:00
delphij
aa8768059b Change explicit maximium numbers to the defined macro MPT_MAX_LUNS.
Approved by:	re (kensmith)
2009-07-02 00:41:37 +00:00
rwatson
0dd7c48b8f For access(2) and eaccess(2), audit the requested access mode.
Approved by:	re (audit argument blanket)
MFC after:	3 days
2009-07-01 22:47:45 +00:00
trasz
dcdba7b2e3 Don't panic on attempt to set ACL on a block device file.
This is just a part of kern/125613.

PR:		kern/125613
Submitted by:	Jaakko Heinonen <jh at saunalahti dot fi>
Reviewed by:	rwatson
Approved by:	re (kib)
2009-07-01 22:30:36 +00:00