1549 Commits

Author SHA1 Message Date
jhb
c4b5226c5f Document the SYSV IPC kernel options. Also, remove the SHM_PHYS_BACKED
option as it is no longer used.

PR:		docs/20080
Submitted by:	Michael Robinson <robinson@netrinsics.com>
2000-07-26 19:39:46 +00:00
asmodai
7cb47a1160 Document IPFILTER_DEFAULT_BLOCK.
PR:		20075
Submitted by:	Arjan de Vet <Arjan.deVet@adv.iae.nl>
2000-07-25 15:40:19 +00:00
billf
20d18ccbac s%LINT%NOTES%g 2000-07-25 08:25:48 +00:00
asmodai
59635bcf3c Document device tdfx and options TDFX_LINUX. 2000-07-24 11:16:56 +00:00
kris
c2e76f6679 Temporary hack for the benefit of the X-Bone project
(http://www.isi.edu/xbone). I expect this to go away in due course.

Submitted by:	Lars Eggert <larse@ISI.EDU>
2000-07-20 00:35:37 +00:00
imp
313eec7c25 Default the pcic to polling. Some laptops need to have polling mode
due to a paucity of IRQs.  I have some reservations about this, so I'm
not going to MFC this just yet.  I'm doing this to see how many
problems it causes so we can do this in 4.2.  I've been seeing hangs
on my laptop from time to time, but sometimes it was not in polling
mode, other tmies it was.  Don't know if this is one problem or more
than one.

Requested by: Sean O Connell
2000-07-19 16:32:38 +00:00
n_hibma
5d39f96c2d Add the umodem driver. 2000-07-18 10:49:45 +00:00
sheldonh
263ffe32d1 Rename MDNSECT to MD_NSECT and declare it as something that isn't
default in NOTES.

Requested by:	bde
Approved by:	phk
2000-07-17 13:13:04 +00:00
itojun
538d8deb71 s/IPSEC_IPV6FWD/IPSEC/. this avoids unexpected behavior on ipv6 fowarding.
(even if you ask for tunnel-mode encryption packets will go out in clear)
sync with kame.
2000-07-16 07:56:54 +00:00
sheldonh
8d94fa095e Add options<sp><tab>MDNSECT=2000 . 2000-07-14 12:21:14 +00:00
tanimura
7716c5370a Finally merge newmidi.
(I had been busy for my own research activity until the last weekend)

Supported devices:

SB Midi Port			(sbc + midi)
SB OPL3				(sbc + midi)
16550 UART			(midi, needs a trick in your hint)
CS461x Midi Port		(csa + midi)

OSS-compatible sequencer	(seq)

Supported playing software:

playmidi			(We definitely need more)

Notes:

/dev/midistat now reports installed midi drivers. /dev/sndstat reports
only pcm drivers. We need the new name(pcmstat?).

EMU8000(SB AWE) does not sound yet but does get probed so that the OPL3
synth on an AWE card works.

TODO:

MSS/PCI bridge drivers
Midi-tty interface to support general serial devices
Modules
2000-07-11 11:49:33 +00:00
mjacob
f5a6b75d84 Beef up a bit descriptions of SCSI devices and what the drive. 2000-07-10 15:37:03 +00:00
mjacob
8e224e7a68 Removing commented out devices I added. 2000-07-10 15:18:20 +00:00
alex
9474a996bc Add missing "a" in "Soft updates is technique".
PR:		19770
Submitted by:	Udo Erdelhoff <ue@nathan.ruhr.de>
2000-07-09 15:44:02 +00:00
alex
2cdcc841c4 Since this file is doc now, reorganize its structure.
Currently, many drivers support more than one bus of ISA, EISA, MCA,
PCI.

Before this commit, we had, for example, some SCSI devices listed more
than once, iirc, some up to three times (ISA/EISA, MCA, PCI).

Since now the "device" line is common for all of them and they only
differ for the hints stuff, I did the following:

First, list Busses: (E)ISA, MCA, PCI and explain, that only ISA
needs the hints stuff.

Move NIC/SCSI stuff, which were the only split sections, behind these
stuff.  Describe all drivers only one time and list all supported
chips.

List all device (+ hints for ISA, if possible).

I've also added few additional supported chips to some drivers, xl for
example and some SCSI drivers.

Also, softupdates is no longer disabled by default, so the comment should
not say, it's not enabled by default due to license issues.

Approved by:	asmodai

To come:	include PAO devices (imp volunteered for help)
2000-07-09 12:34:53 +00:00
mjacob
6301565880 Update SCSI device section, per Peter Wemm. I still
think the commented entries in GENERIC are the
right thing to do.
2000-07-08 07:44:01 +00:00
mjacob
ed6b1cf022 Oops- remove the '0' appended to targbh. 2000-07-08 07:05:40 +00:00
mjacob
14d741fcc2 Add in the commented out SCSI device entries of
#device         ses             # SCSI Environmental Services (and SAF-TE)
#device         targ            # SCSI Target Mode Code
#device         targbh0         # SCSI Target Mode Blackhole Device
#define         pt              # SCSI Processor Target Device

so that people know that they are there.
2000-07-08 07:02:58 +00:00
sumikawa
4fb63a4ede Add 'device stf', 6to4(one of IPv6 over IPv4 encapsulations) interface. 2000-07-04 17:37:21 +00:00
jhb
183fce400a Replace the PQ_*CACHE options with a single PQ_CACHESIZE option that you
set equal to the number of kilobytes in your cache.  The old options are
still supported for backwards compatibility.

Submitted by:	Kelly Yancey <kbyanc@posi.net>
2000-07-04 08:55:18 +00:00
phk
a02f6b8e45 Include SOFTUPDATES in NOTES/LINT by default. 2000-07-03 13:24:25 +00:00
alex
b878e64d53 - MSDOSFS can do both FAT _and_ FAT32. Since the name "MSDOS" might be
confusing, explecitely mention this.
- softupdates' README is no longer in contrib/softupdates. Fix new location.
2000-06-29 10:45:55 +00:00
peter
d8cc9ef001 Fix some fat-fingering of the isic lines. (argh!)
Fix some negative options that got turned on.

Submitted by:	bde (mostly)
2000-06-26 10:04:00 +00:00
peter
358ae698cb Report the line number where gethints.pl does not understand something
in an old device line.
2000-06-26 09:08:23 +00:00
markm
c740c026d9 Get the build bits right for the new Architecture Independant null- and
entropy drivers.
Reviewed by:	dfr(mostly)
2000-06-25 09:18:13 +00:00
peter
2fe0662f1a Add SOFTUPDATES to GENERIC (BOOTMFS has this filtered out) 2000-06-22 06:01:02 +00:00
alfred
e3e72a583b return of the accept filter part II
accept filters are now loadable as well as able to be compiled into
the kernel.

two accept filters are provided, one that returns sockets when data
arrives the other when an http request is completed (doesn't work
with 0.9 requests)

Reviewed by: jmg
2000-06-20 01:09:23 +00:00
mjacob
b56ab4dc78 Remove all but ISP_TARGET_MODE options for isp and ispfw pseudo device. 2000-06-18 06:59:13 +00:00
peter
61ad2eac93 Deal with quoted arguments. This hack parser uses whitespace to delimit
fields, not lex/yacc grammar so it is not an exact match but should be
close enough for most cases.
Deal with 'port?', 'irq?' style specifications.  These are parsed as
seperate values in lex/yacc in config(8) but tripped up this helper tool.
2000-06-17 20:10:55 +00:00
peter
9b7f685f77 Use while (<>) instead of while(<STDIN>) so that perl will automagically
deal with filename arguments.  It is amazing how much you forget over time.

Thanks to the people that reminded me this.  I knew there was an easy way
that didn't involve messing with $argv, filehandles, etc, but just could
not remember - all of my books are on the opposite side of the planet..
2000-06-17 19:06:13 +00:00
peter
9e9163919b s/iomem/maddr/
s/iosiz/msize/
2000-06-14 10:04:06 +00:00
peter
2a3015841d s/iomem/maddr/ - these were generated from an older verion of the
gethints script. :-(
2000-06-14 10:01:39 +00:00
ps
27235775e1 Add option ALT_BREAK_TO_DEBUGGER.
Implement the Solaris way to break into DDB over a serial console
instead of sending a break.  Sending the character sequence
CR ~ ^b will break the kernel into DDB (if DDB is enabled).

Reviewed by:	peter
2000-06-14 06:41:33 +00:00
peter
98de8beb88 Print error messages to stderr, not stdout. 2000-06-14 02:45:11 +00:00
peter
647ef85d48 Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.

config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel.  You can reconfigure your
isa devices with the likes of this at loader(8) time:
  set hint.ed.0.port=0x320

userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.

It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8).  See the "hints" directive in GENERIC
as an example.

All device wiring has been moved out of config(8).  There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file.  If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you.  You can also compile in the
hints directly with:  hints "device.hints"  as well.

There are a few things that I'm not too happy with yet.  Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it.  However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built.  A stack of man4 pages will need updating. :-/

Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated.  eg:  'device fe 4' will compile the fe driver with NFE set
to 4.  You can then set hints for 4 units (0 - 3).  Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this.  This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.

Please exercise EXTREME CAUTION when transitioning!

Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
kato
dba64e78dc Added new options CPU_PPRO2CELERON and CPU_L2_LATENCY to support
Socket 8 to 370 converters.  When (1) CPU_PPRO2CELERON option is
defined, (2) Intel CPU is found and (3) CPU ID is 0x66?, L2 cache is
enabled through MSR 0x11e.  The L2 cache latency value can be
specified by CPU_L2_LATENCY option.  Default value of L2 cache latency
is 5.

These options are useful if you use Socket 8 to Socket 370 converter
(e.g. Power Leap's PL-Pro/II.)  Most PentiumPro BIOSs don't enable L2
cache of Mendocino Celeron CPUs because they don't know Celeron CPUs.
These options are needles if you use a Coppermine (FCPGA) Celeron or
PentiumIII, becuase the L2 cache enable bit is hard wired and L2 cache
is always enabled.
2000-06-13 09:10:37 +00:00
jhb
e34188e1fc Document flags 0x100 in syscons.4, and document syscons' flags in LINT.
Reviewed by:	yokota, obrien
2000-06-09 23:47:30 +00:00
alex
b39050ecfa Since many people use LINT as "supported hardware" list, add
all supported cards to the description of the ep-driver.

Reviewed by:	asmodai
2000-06-09 13:09:50 +00:00
joerg
4a75312ccc Mention that i4bisppp requires sppp; too many people use LINT as a
configuration guide and then miss this one.
2000-06-06 10:31:19 +00:00
msmith
cde7d8a67d Bump the default NBUS value to 8. 2000-05-31 19:01:45 +00:00
green
5f28a02db5 Change sl(4) configuration lines to reflect its new dynamic nature. 2000-05-30 23:01:37 +00:00
imp
a425f3584e ICMP_RATELIM is no longer an option. 2000-05-29 03:34:04 +00:00
dan
4e9d022872 sysctl'ize ICMP_BANDLIM and ICMP_BANDLIM_SUPPRESS_OUTPUT.
Suggested by: des/nbm
2000-05-22 16:12:28 +00:00
dan
187df3a0fb Add option ICMP_BANDLIM_SUPPRESS_OUTPUT to the mix. With this option,
badport_bandlim() will not muck up your console with printf() messages.
2000-05-22 15:00:41 +00:00
peter
b83e6f1ce3 Provide a temporary undocumented option: SHM_PHYS_BACKED. This will
become sysctl and/or flags controlled later.  It's mainly here for an
easy place to test the physical memory backed objects.
2000-05-21 13:52:13 +00:00
msmith
5893f5b1cc Correct the syntax of ROOTDEVNAME and describe it somewhat better. 2000-05-19 20:46:28 +00:00
hoek
cda3a229f2 Change to comments only: spell FreeBSD.org correctly 2000-05-13 11:21:19 +00:00
jhb
85d951933f Turn on USB support for most USB devices. udbp is not turned on since
NETGRAPH is not present in GENERIC at the moment.  Also, change some
settings to support USB installs:

- Add KBD_INSTALL_CDEV as an option to make /dev/kbd[01] actually work.
- Turn on keyboard probing in sc0.  The syscons driver will now use a
  flag documented in ukbd(4) but not in sc(4) that tells syscons to
  actively search for a keyboard device if none is found.  This allows
  USB keyboards to just be plugged in and instantly start working.
- Require the atkbd0 driver to actually probe to see if a keyboard is
  there.  This allows USB keyboards to be seen by sc0 if an AT keyboard
  isn't plugged into the computer.  This also means that you will no
  longer be able to plug an AT keyboard into a machine after it has
  booted a GENERIC kernel and use it.  AT keyboards aren't designed for
  this anyway.  USB keyboards are designed for this, and they work.
2000-05-12 03:05:35 +00:00
imp
a4be511757 Move sn and cs drivers from the compat section to the real section.
Enable xe driver now that I've had reports that it works.

PR: 18323
Submitted by: MIHIRA Yoshiro-san
2000-05-03 00:49:57 +00:00
n_hibma
53d90f6dfb The USB double bulk pipe driver (Host to host cables). Currently there
are two supported chips, the NetChip 1080 (only prototypes available)
and the EzLink cable. Any other cable should be supported however as they
are all very much alike (there is a difference between them wrt
performance).

It uses Netgraph.

This driver was mostly written by Doug Ambrisko and Julian Elischer and
I would like to thank Whistle for yet another contribution. And my
aplogies to them for me sitting on the driver for so long (2 months).

Also, many thanks to Reid Augustin from NetChip for providing me with a
prototype of their 1080 chip.

Be aware of the fact that this driver is very immature and has only been
tested very lightly. If someone feels like learning about Netgraph however
this is an excellent driver to start playing with.
2000-05-01 22:48:23 +00:00