Previously, it was just a pointer which was copied, but
some callers pass in a stack variable which will go out of scope.
Add GROUPTASK_NAMELEN macro (32) and snprintf() the name into it,
using "grouptask" if name is NULL. We can now safely include
gtask->gt_name in console messages.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12449
This allows tuning the rx budget for special load profiles
as well as more easily testing to determine sane defaults.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12445
Build a list of mbufs to pass to if_input() after LRO. Results in
12% small packet forwarding rate improvement.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12444
If the packet is smaller than MTU, disable the TSO flags.
Move TCP header parsing inside the IS_TSO?() test.
Add a new IFLIB_NEED_ZERO_CSUM flag to indicate the checksums need to be zeroed before TX.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12442
build on arm/armv6 images.
Pointyhat: gjb (myself)
MFC after: immediate
MFC note: releng/10.4 has broken because of this
Sponsored by: The FreeBSD Foundation
check hash to cylinder groups. If a check hash fails when a cylinder
group is read, no further allocations are attempted in that cylinder
group until it has been fixed by fsck. This avoids a class of
filesystem panics related to corrupted cylinder group maps. The
hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Specifics of the changes:
sys/sys/buf.h:
Add BX_FSPRIV to reserve a set of eight b_xflags that may be used
by individual filesystems for their own purpose. Their specific
definitions are found in the header files for each filesystem
that uses them. Also add fields to struct buf as noted below.
sys/kern/vfs_bio.c:
It is only necessary to compute a check hash for a cylinder
group when it is actually read from disk. When calling bread,
you do not know whether the buffer was found in the cache or
read. So a new flag (GB_CKHASH) and a pointer to a function to
perform the hash has been added to breadn_flags to say that the
function should be called to calculate a hash if the data has
been read. The check hash is placed in b_ckhash and the B_CKHASH
flag is set to indicate that a read was done and a check hash
calculated. Though a rather elaborate mechanism, it should
also work for check hashing other metadata in the future. A
kernel internal API change was to change breada into a static
fucntion and add flags and a function pointer to a check-hash
function.
sys/ufs/ffs/fs.h:
Add flags for types of check hashes; stored in a new word in the
superblock. Define corresponding BX_ flags for the different types
of check hashes. Add a check hash word in the cylinder group.
sys/ufs/ffs/ffs_alloc.c:
In ffs_getcg do the dance with breadn_flags to get a check hash and
if one is provided, check it.
sys/ufs/ffs/ffs_vfsops.c:
Copy across the BX_FFSTYPES flags in background writes.
Update the check hash when writing out buffers that need them.
sys/ufs/ffs/ffs_snapshot.c:
Recompute check hash when updating snapshot cylinder groups.
sys/libkern/crc32.c:
lib/libufs/Makefile:
lib/libufs/libufs.h:
lib/libufs/cgroup.c:
Include libkern/crc32.c in libufs and use it to compute check
hashes when updating cylinder groups.
Four utilities are affected:
sbin/newfs/mkfs.c:
Add the check hashes when building the cylinder groups.
sbin/fsck_ffs/fsck.h:
sbin/fsck_ffs/fsutil.c:
Verify and update check hashes when checking and writing cylinder groups.
sbin/fsck_ffs/pass5.c:
Offer to add check hashes to existing filesystems.
Precompute check hashes when rebuilding cylinder group
(although this will be done when it is written in fsutil.c
it is necessary to do it early before comparing with the old
cylinder group)
sbin/dumpfs/dumpfs.c
Print out the new check hash flag(s)
sbin/fsdb/Makefile:
Needs to add libufs now used by pass5.c imported from fsck_ffs.
Reviewed by: kib
Tested by: Peter Holm (pho)
illumos/illumos-gate@42b141117242b1411172https://www.illumos.org/issues/8648
I'm opening this bug to track integration of the following ZFS on Linux
commit into illumos:
commit f763c3d1df569a8d6b60bcb5e95cf07aa7a189e6
Author: LOLi <loli10K@users.noreply.github.com>
Date: Mon Aug 21 17:59:48 2017 +0200
Fix range locking in ZIL commit codepath
Since OpenZFS 7578 (1b7c1e5) if we have a ZVOL with logbias=throughput
we will force WR_INDIRECT itxs in zvol_log_write() setting itx->itx_lr
offset and length to the offset and length of the BIO from
zvol_write()->zvol_log_write(): these offset and length are later used
to take a range lock in zillog->zl_get_data function: zvol_get_data().
Now suppose we have a ZVOL with blocksize=8K and push 4K writes to
offset 0: we will only be range-locking 0-4096. This means the
ASSERTion we make in dbuf_unoverride() is no longer valid because now
dmu_sync() is called from zilog's get_data functions holding a partial
lock on the dbuf.
Fix this by taking a range lock on the whole block in zvol_get_data().
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: LOLi <loli10K@users.noreply.github.com>
MFC after: 10 days
illumos/illumos-gate@bd9d3f9046bd9d3f9046https://www.illumos.org/issues/8661
The "zil-cw1" dtrace probe was previously removed in 8558, and the "zil-cw2"
probe should have been removed in that patch as well. Unfortunately, the "zil-
cw2" was not removed in 8558, so this bug is to track it's removal.
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 1 week
Bump the FreeBSD version to force recompilation of external
kernel modules due to structure change.
PR: 222504
Submitted by: Greg V <greg@unrelenting.technology>
MFC after: 1 week
Sponsored by: Mellanox Technologies
The device index, partition index and reference counter are all positive
numbers. However, since our internal partition number may be negative
to indicate GPT table, the compare expression need to take care when comparing
pdinfo_t and partition data.
I accidentally introduced different whitespace style in r323878. I'm not
used to using tabs for indentation in Python scripts.
Whitespace only; no functional change.
Sponsored by: Dell EMC Isilon
Prevent cam_iosched_iops_tick() from discarding 'unspent' ios unless
it's a new accounting interval.
Previously ios that weren't used between ticks were lost, as a result
the iops limiter could enforce a limit below the configured maximum.
Obtained from: ElectroBSD
Submitted by: Fabian Keil
PR: 221974
Previously the iops limiter would always allow at least
quanta ios per second as cam_iosched_iops_tick() never set
ios->l_value1 below 1.
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
PR: 221974
In particular, support chaining an AES cipher with an HMAC for a request
including AAD. This permits submitting requests from userland to encrypt
objects like IPSec packets using these algorithms.
In the non-GCM case, the authentication crypto descriptor covers both the
AAD and the ciphertext. The GCM case remains unchanged. This matches
the requests created internally in IPSec. For the non-GCM case, the
COP_F_CIPHER_FIRST is also supported since the ordering matters.
Note that while this can be used to simulate IPSec requests from userland,
this ioctl cannot currently be used to perform TLS requests using AES-CBC
and MAC-before-encrypt.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11759
This requests that the cipher be performed before rather than after
the HMAC when both are specified for a single operation.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11757
Software crypto implementations don't care how the buffer is laid out,
but hardware implementations may assume that the AAD is always before
the plain/cipher text and that the hash/tag is immediately after the end
of the plain/cipher text.
In particular, this arrangement matches the layout of both IPSec packets
and TLS frames. Linux's crypto framework also assumes this layout for
AEAD requests.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11758
It doesn't appear to be safe to use gtask->gt_name.
Reported by: Mark Johnston, Jenkins
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12448
/usr/local/etc gets created and populated by packages. However, if no
packages are installed when setup_nanobsd is run, this symlink won't
get created, causing problems if packages are installed later (say on
first boot). Therefore, always create the symlink and etc/local. It
does no harm and may help.
Inspired by crochet issue #183 (consuingly says NanoBSD, means crochet)
Sponsored by: Netflix
Move handling of these three pathconf() variables out of vop_stdpathconf()
and into devfs_pathconf() as TTY devices can only be devfs files. In
addition, only return settings for these three variables for devfs devices
whose device switch has the D_TTY flag set.
Discussed with: bde, kib
Sponsored by: Chelsio Communications
Check the return code of intr_setaffinity() and log any errors
it returns. When a qid is not located, log an error before returning
failure. Also, use __func__ rather than hardcoding the function name
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12436
Previously, this test was entirely a no-op as no vector in the NIST-KAT file
has a precisely 20-byte key.
Additionally, not every vector in the file is SHA1. The length field
determines the hash under test, and is now decoded correctly.
Finally, due to a limitation I didn't feel like fixing in cryptodev.py, MACs
are truncated to 16 bytes in this test.
With this change and the uncommitted D12437 (to allow key sizes other than
those used in IPSec), the SHA tests in cryptotest.py actually test something
and e.g. at least cryptosoft passes the test.
Sponsored by: Dell EMC Isilon
Previously had the same short and long description as taskqueues.
This could cause problems with memguard(9) and vmstat -m which use
the short description as a unique identifier.
Reviewed by: sbruno
Approved by: sbruno (mentor)
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12438
- Use HWRM_FUNC_VF_CFG instead of HWRM_FUNC_CFG on VFs
- Fix NPAR/VF detection
- Clean up flag definitions
- Don't allow WoL on VFs
Although the bnxt driver doesn't support SR-IOV so can create VFs yet,
the PF could be running Linux or ESCi with a VF passed through to a
FreeBSD guest. This fixes the driver for that use case.
Submitted by: Siva Kallam <siva.kallam@@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12410
For some reason, we only skipped AES-XTS tests if a driver was not in the
aesmodules list. Skip other AES modes as well to prevent spurious failures
in non-AES drivers.
Sponsored by: Dell EMC Isilon
accepts PQ_NONE as the specified queue and returns a Boolean indicating
whether the page's wire count transitioned to zero. Use these features
in dev/drm2.
Reviewed by: kib, markj
MFC after: 1 week
