a small chance that it might have broken loading the miibus, so err on
the side of caution until I can figure out what is going on. This
backs out all but the PCI, PCIB and ISA bus interfaces being
"standard," which have been well tested...
Add XXX comments to mark places which need to be taken care of
if we want to remove this part of the kernel from Giant.
Add a comment on a potential performance problem with ip_forward()
easier loading of modules that might refer to these interfaces. None
of the code that implements them is standard, just the glue. This
bloats the kernel a whopping 8k.
Silence on: arch@
o ToPIC is happy with two cards now, even when the two cards are
modems.
o Fix (all?) hangs on boot when power is applied to the card. I
suspect that this will make the Ricoh bridges happier and also
make a lot of VAIO owners happy (confirm to me in private email
please :-).
o All Cardbus bridges should now support 3.3V, X.XV and Y.YV cards,
to the extent that the underlying hardware supports such cards.
(X.X and Y.Y haven't been assigned values yet :-).
o Better 3.3V support for Ricoh ISA bridges.
How:
o Don't mess with the power register when scanning the cards. It
is unnecessary and causes BADVcc conditions on many chipsets. These
in turn can cause an interrupt storm.
o Make pcic_disable reset the slot's voltage.
o Move initializing voltage for the slot until after it has been
disabled.
o Fix a lot of issues with the pcic_cardbus_power routine. We
now properly enable the card and take it out of reset after
a power change.
o When detecting the card's voltage, if we're in a BadVcc state,
direct the bridge to rescan the card for what it supports.
(we might need to in the future set the power register to 0
before doing this).
o Don't preserve CLKSTOP. need to revisit this.
o Better support for Ricoh ISA bridges for 3.3V cards.
o Don't write to PCIC_POWER directly as offten, but instead go
through the pcic_power interface.
o All cardbus bridges now default to use cardbus power control.
o Add misc register definitions.
o remove some (now) bogus comments.
Extra Special Thanks To: Scott Lamber for his kind and generous loan
of a Toshiba laptop with a ToPIC 100 in it for my use.
dcache aliasing. A page that already had more than 1 mapping of the
same virtual colour would not be correctly uncached.
Noticed by: Artur Grabowski <art@openbsd.org>
checksumming. These bugs could possibly cause bad code to be
generated at elevated optimization levels.
First, eliminate the use of preprocessor magic to form the address
fields of asm instructions. It hid the actual addresses being
referenced from the compiler. Without knowledge of all the data
dependencies, the compiler might possibly use optimizations which
would result in incorrect code.
Use "__asm __volatile" rather than "__asm" for instruction sequences
that pass information through the condition codes (the carry bit, in
this case). Without __volatile, the compiler might add unrelated
code between consecutive __asm instructions, modifying the condition
codes. I have seen GCC insert stack pointer adjustments in this
way, for example. Unfortunately, GCC doesn't provide a way to
specify dependencies on the condition codes. You can specify that
they are clobbered, but not that you are going to use them as input.
Finally, simplify the LOAD macro. This macro is used as a poor
man's prefetch. The simpler version gives the compiler more leeway
about just how it performs the prefetch.
MFC after: 1 week
64-bit architectures that was introduced in the UFS2 code
merge two days ago. The stat structure change that caused
the problem was the addition of the file create time.
Submitted by: Bruce Evans <bde@zeta.org.au>
Sponsored by: DARPA & NAI Labs.
out of inodes in a cylinder group would fail to check for
free inodes in other cylinder groups. This bug was introduced
in the UFS2 code merge two days ago.
An inode is allocated by calling ffs_valloc which calls
ffs_hashalloc to do the filesystem scan. Ffs_hashalloc
walks around the cylinder groups calling its passed allocator
(ffs_nodealloccg in this case) until the allocator returns a
non-zero result. The bug is that ffs_hashalloc expects the
passed allocator function to return a 64-bit ufs2_daddr_t.
When allocating inodes, it calls ffs_nodealloccg which was
returning a 32-bit ino_t. The ffs_hashalloc code checked
a 64-bit return value and usually found random non-zero bits in
the high 32-bits so decided that the allocation had succeeded
(in this case in the only cylinder group that it checked).
When the result was passed back to ffs_valloc it looked at
only the bottom 32-bits, saw zero and declared the system
out of inodes. But ffs_hashalloc had really only checked
one cylinder group.
The fix is to change ffs_nodealloccg to return 64-bit results.
Sponsored by: DARPA & NAI Labs.
Submitted by: Poul-Henning Kamp <phk@critter.freebsd.dk>
Reviewed by: Maxime Henrion <mux@freebsd.org>
improperly clearing more then just the invalid portions of the page. (This
bug is not known to have been triggered by anything).
Submitted by: tegge
MFC after: 7 days
with the acquisition and release of Giant. (Annotate as MPSAFE.)
o Reorder the sanity checks in dev_pager_alloc() to reduce
the time that Giant is held.
uio now that we don't use uiomove() anymore.
o Enforce stricter checks on the length of the iov's in
nmount(2) since we now malloc() them individually and
corrupted iov's could make the kernel crash in malloc()
with "kmem_map too small".
Reviewed by: phk
release of Giant around the direct manipulation of the vm_object and
the optional call to pmap_object_init_pt().
o In vm_map_findspace(), remove GIANT_REQUIRED. Instead, acquire and
release Giant around the occasional call to pmap_growkernel().
o In vm_map_find(), remove GIANT_REQUIRED.
when machdep.tsc_freq returned a negative number on a 2.2GHz Xeon.
Submitted by: Brian Harrison <bharrison@ironport.com>
Reviewed by: phk
MFC after: 1 week
packet forwarding state ("annotations") during ip processing.
The code is considerably cleaner now.
The variables removed by this change are:
ip_divert_cookie used by divert sockets
ip_fw_fwd_addr used for transparent ip redirection
last_pkt used by dynamic pipes in dummynet
Removal of the first two has been done by carrying the annotations
into volatile structs prepended to the mbuf chains, and adding
appropriate code to add/remove annotations in the routines which
make use of them, i.e. ip_input(), ip_output(), tcp_input(),
bdg_forward(), ether_demux(), ether_output_frame(), div_output().
On passing, remove a bug in divert handling of fragmented packet.
Now it is the fragment at offset 0 which sets the divert status of
the whole packet, whereas formerly it was the last incoming fragment
to decide.
Removal of last_pkt required a change in the interface of ip_fw_chk()
and dummynet_io(). On passing, use the same mechanism for dummynet
annotations and for divert/forward annotations.
option IPFIREWALL_FORWARD is effectively useless, the code to
implement it is very small and is now in by default to avoid the
obfuscation of conditionally compiled code.
NOTES:
* there is at least one global variable left, sro_fwd, in ip_output().
I am not sure if/how this can be removed.
* I have deliberately avoided gratuitous style changes in this commit
to avoid cluttering the diffs. Minor stule cleanup will likely be
necessary
* this commit only focused on the IP layer. I am sure there is a
number of global variables used in the TCP and maybe UDP stack.
* despite the number of files touched, there are absolutely no API's
or data structures changed by this commit (except the interfaces of
ip_fw_chk() and dummynet_io(), which are internal anyways), so
an MFC is quite safe and unintrusive (and desirable, given the
improved readability of the code).
MFC after: 10 days
release of Giant. (Annotate as MPSAFE.)
o Also, in vnode_pager_alloc(), remove an unnecessary re-initialization
of struct vm_object::flags and move a statement that is duplicated
in both branches of an if-else.
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
As the comment in the code says, eventually there will be a proper
data structure (e.g NetBSD's struct m_tag) to store chains of
annotations, and mbuf-handling procedures will handle these chains
in the correct way.
Right now, these chains do not exist, and we just use the constants
defined here to implement simple ad-hoc solutions to remove some global
variables used so far to pass around informations about packets
being processed.
Global variables are not only ugly and make the code unreadable, they
also prevent from using parallelism in network stack processing.
(the 3-days MFC only refers to this commit, i.e. the PACKET_TAG_*
constants; the full mechanism will be committed and MFC'ed on a
longer timescale).
MFC after: 3 days
a linked list. This is to allow the merging of the mount
options in the MNT_UPDATE case, as the current data structure
is unsuitable for this.
There are no functional differences in this commit.
Reviewed by: phk
for example, break an sbrk(>=4GB) on 64-bit architectures
even if the resource limit allowed it.
o Correct an off-by-one error.
o Correct a spelling error in a comment.
o Reorder an && expression so that the commonly FALSE expression
comes first.
Submitted by: bde (bullets 1 and 2)
4 u_ints but needs to be an array of 4 uint32_t's to work, at least
if unsigned ints have less than 32 bits. It should be a non-array of
1 uint128_t on 128-bit machines, especially if u_int has 128 bits.
The headers that declare uint32_t (actually __uint32_t) are intentionally
not included here since this header should only be included by other
headers.
Fixed some style bugs (space instead of tab after #ifndef and #endif).
implementations can provide a base zero ffs function if they wish.
This changes
#define RQB_FFS(mask) (ffs64(mask))
foo = RQB_FFS(mask) - 1;
to
#define RQB_FFS(mask) (ffs64(mask) - 1)
foo = RQB_FFS(mask);
On some platforms we can get the "- 1" for free, eg: those that use the
C code for ffs64().
Reviewed by: jake (in principle)
Consequently, use vm_map_insert() and vm_map_delete(), which expect
the vm_map to be locked, instead of vm_map_find() and vm_map_remove(),
which do not.
Register the ISR early, but do not actually kick off the timer until we
see some activity. This still saves us from running the arp timers on
a system with no network cards.
- Added a mutex, kld_mtx, to protect the kernel_linker system. Note that
while ``classes'' is global (to that file), it is only read only after
SI_SUB_KLD, SI_ORDER_ANY.
- Add a SYSINIT to flip a flag that disallows class registration after
SI_SUB_KLD, SI_ORDER_ANY.
Idea for ``classes'' read only by: jake
Reviewed by: jake
allocator.
- Properly set M_ZERO when talking to the back end page allocators for
non malloc zones. This forces us to zero fill pages when they are first
brought into a cache.
- Properly handle M_ZERO in uma_zalloc_internal. This fixes a problem where
per cpu buckets weren't always getting zeroed.
in a user process gaining visibility into the 'old' contents of a filesystem
block. There were two cases: (1) when uiomove() fails (user process issues
illegal write), and (2) when uiomove() overlaps a mmap() of the same file at
the same offset (fault -> recursive buffer I/O reads contents of old block).
Unfortunately 1.72 also had the unintended effect of forcing the filesystem
to do a read-before-write in the case of a full-block-write (non append case),
e.g. 'dd if=/dev/zero of=test.dat bs=1m count=256 conv=notrunc'. This
destroys performance.. not only is a read forced for every write, but
clustering breaks as well.
The solution is to clear the buffer manually in the full-block case rather
then asking BALLOC to do it (BALLOC issues the read-before-write). In the
partial-block case we want BALLOC to do it because the read-before-write
is necessary. This patch should greatly improve database and news-feed
server performance.
Found by: MKI <mki@mozone.net>
MFC after: 3 days
uifind() with a proc lock held.
change_ruid() and change_euid() have been modified to take a uidinfo
structure which will be pre-allocated by callers, they will then
call uihold() on the uidinfo structure so that the caller's logic
is simplified.
This allows one to call uifind() before locking the proc struct and
thereby avoid a potential blocking allocation with the proc lock
held.
This may need revisiting, perhaps keeping a spare uidinfo allocated
per process to handle this situation or re-examining if the proc
lock needs to be held over the entire operation of changing real
or effective user id.
Submitted by: Don Lewis <dl-freebsd@catspoiler.org>
release of Giant.
o Reduce the scope of GIANT_REQUIRED in vm_map_insert().
These changes will enable us to remove the acquisition and release
of Giant from obreak().
so that /dev/mumble can be the entrypoint to some networking graph,
e.g. a tunnel or a remote tape drive or whatever...
Not fully tested (by me) yet.
Submitted by: Mark Santcroos <marks@ripe.net>
MFC after: 3 weeks
This facilitates the use in circumstances where you are using a serial
console as well. GDB doesn't support anything higher than 9600 baud (19k2
if you are lucky), but the console does.
allocated slabs and bucket caches for free items. It will not go ask the vm
for pages. This differs from M_NOWAIT in that it not only doesn't block, it
doesn't even ask.
- Add a new zcreate option ZONE_VM, that sets the BUCKETCACHE zflag. This
tells uma that it should only allocate buckets out of the bucket cache, and
not from the VM. It does this by using the M_NOVM option to zalloc when
getting a new bucket. This is so that the VM doesn't recursively enter
itself while trying to allocate buckets for vm_map_entry zones. If there
are already allocated buckets when we get here we'll still use them but
otherwise we'll skip it.
- Use the ZONE_VM flag on vm map entries and pv entries on x86.
during the previous probe are stale.
What really should be done is route the probe through
device_probe_and_attach bit this is one of those ICBBATIASS (I can't be
bothered as there is a simpler solution). The user can easily replug the
device after kldloading a new device driver.
'make load' if an object dir was, like it is used in /sys/modules. I.e.
cd /sys/modules/umass
make obj
make
make load
works again without having to install the module.
If no objdir was used the module in the current directory is used.
magic numbers. Use stxa_sync instead of stxa; membar #Sync; to ensure
that no instruction is placed between the two. This can cause random
corruption even though interrupts are already disabled.
o Move pmap_pageable() outside of Giant in vm_fault_unwire().
(pmap_pageable() is a no-op on all supported architectures.)
o Remove the acquisition and release of Giant from mlock().
CAM_QUIRK_HILUN devices we loop thru 32bits of lun. Oops.
Switch to using USEC_DELAY rather than USEC_SLEEP at isp_reset time.
Try to paper around a defect in clients that don't correctly registers
themeselves with the fabric nameserver.
Minor updates for Mirapoint support- they still use code that is not
HANDLE_LOOPSTATE_IN_OUTER_LAYERS, and, surprise surprise, this old
stuff had some bugs in it.
Clean up some target mode stuff.
MFC after: 1 week
topology, speed, loopid, WWPN/WWNN, etc.
Beef up target mode. Add isp_handle_platform_notify_scsi and
isp_handle_platform_notify_fc platform handlers to handle immediate
notifies (isp_handle_platform_notify_scsi is still stubbed out).
In implementation of isp_handle_platform_notify_fc, for IN_ABORT_TASK,
peel off a pending XPT_IMMED_NOTIFY and call xpt_done on it and hope
that somebody upstream is listening.
Make sure on final CTIO2s that we set residual correctly. These are
absolutely crucial. Make sure we set relative offset for each CTIO2
based upon bytes we've already xferred. This is what the private
adjunct datat to the original ATIO is. Note state of command so
we can figure out where to find it if we get an ABORT from the firmware.
Make sure we *always* set CAM_TAG_ACTION_VALID for ATIO2s. Make sure
we keep track of the original lun.
If se sent status (or we're otherwise done with the command), don't
forget to free the adjunct structure.
(so we can, when things get lost, find out who currently is processing
on behalf of this open exchange. Invariably, when things are lost and
wedged, it's CAM).
Keep an atio resource counter locally.
MFC after: 1 week
running ABOUT FIRMWARE with some that were started by BIOS downloads).
Redo CTIO2 dma mapping- use continuation segments instead of multiple
CTIO2s. Thanks to Veritas for sponsoring this work (in a different
context).
MFC after: 1 week
to *not* do flow control based upon resource counts for the firmware.
Increase default immediate notify count to 16.
Change isp_target_async to a function returning an integer.
