This fixes the following panic on powerpc:
pci_get_vendor failed for pcib1 on bus ofwbus0, error = 2
PR: 238730
Reported by: Dennis Clarke <dclarke@blastwave.org>
Tested by: Dennis Clarke <dclarke@blastwave.org>
MFC after: 2 weeks
'=' asm constraint marks a variable as write-only. Because of this, gcc
throws away the initialization of 'res', causing garbage to be returned if
the CAS was successful. Use '+' to mark res as read/write, so that the
initialization stays in the generated asm. Also, fix the reservation
clearing stwcx store index register in casueword32, and only do the dummy
store when needed, skip it if the real store has already succeeded.
This ptrace operation returns a structure containing the error and
return values from the current system call. It is only valid when a
thread is stopped during a system call exit (PL_FLAG_SCX is set).
The sr_error member holds the error value from the system call. Note
that this error value is the native FreeBSD error value that has _not_
been translated to an ABI-specific error value similar to the values
logged to ktrace.
If sr_error is zero, then the return values of the system call will be
set in sr_retval[0] and sr_retval[1].
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D20901
on PCx2129 chips too.
The datasheet for the PCx2129 chips says that there is only a watchdog
timer, no countdown timer. It turns out the countdown timer hardware is
there and works just the same as it does on a PCx2127 chip, except that you
can't use it to trigger an interrupt or toggle an output pin. We don't need
interrupts or output pins, we only need to read the timer register to get
sub-second resolution. So start treating the 2129 chips the same as 2127.
An obscure footnote in the datasheets for the PCx2127, PCx2129, and
PCF8523 rtc chips states that the chips do not support i2c repeat-start
operations. When the driver was originally written and tested, the i2c
bus on that system also didn't support repeat-start and just quietly
turned repeat-start operations into a stop-then-start, making it appear
that the nxprtc driver was working properly.
The repeat-start situation only comes up on reads, so instead of using
the standard iicdev_readfrom(), use a local nxprtc_readfrom(), which is
just a cut-and-pasted copy of iicdev_readfrom(), modified to send two
separate start-data-stop sequences instead of using repeat-start.
syscallret() doesn't use error anymore. Fix a few other places to permit
removing the return value from syscallenter() entirely.
- Remove a duplicated assertion from arm's syscall().
- Use td_errno for amd64_syscall_ret_flush_l1d.
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D2090
Early errors prior to a system call did not set td_errno. This commit
sets td_errno for all errors during syscallenter(). As a result,
syscallret() can now always use td_errno without checking TDP_NERRNO.
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D20898
Previously the arm64 pmap did no reference or modification tracking;
all mappings were treated as referenced and all read-write mappings
were treated as dirty. This change implements software management
of these attributes.
Dirty bit management is implemented to emulate ARMv8.1's optional
hardware dirty bit modifier management, following a suggestion from alc.
In particular, a mapping with ATTR_SW_DBM set is logically writeable and
is dirty if the ATTR_AP_RW_BIT bit is clear. Mappings with
ATTR_AP_RW_BIT set are write-protected, and a write access will trigger
a permission fault. pmap_fault() handles permission faults for such
mappings and marks the page dirty by clearing ATTR_AP_RW_BIT, thus
mapping the page read-write.
Reviewed by: alc
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20907
pmap_ts_referenced() does not necessarily clear the access bit from
all accessed mappings of a given page. Thus, if a scan of the mappings
needs to be restarted, we should be careful to avoid double-counting
accessed mappings whose access bits were not cleared in a previous
attempt.
Reported by: alc
Reviewed by: alc
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20926
If umtxq_check_susp() indicates an exit, we should clean the resources
before returning. Do it by breaking out of the loop and relying on
post-loop cleanup.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Differential revision: https://reviews.freebsd.org/D20949
After r349951, the return code must be checked instead of old == new
comparision.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Differential revision: https://reviews.freebsd.org/D20949
When using the SOL_SOCKET level socket option SO_LINGER, the structure
struct linger is used as the option value. The component l_linger is of
type int, but internally copied to the field so_linger of the structure
struct socket. The type of so_linger is short, but it is assumed to be
non-negative and the value is used to compute ticks to be stored in a
variable of type int.
Therefore, perform input validation on l_linger similar to the one
performed by NetBSD and OpenBSD.
Thanks to syzkaller for making me aware of this issue.
Thanks to markj@ for pointing out that a similar check should be added
to so_linger_set().
Reviewed by: markj@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20948
get BBRv1 into the tree. This fixes the DSACK bug but
is also needed by BBR. We have yet to go two more
one will be for the pacing code (tcp_ratelimit.c) and
the second will be for the new updated LRO code that
allows a transport to know the arrival times of packets
and (tcp_lro.c). After that we should finally be able
to get BBRv1 into head.
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D20908
prior to its import into FreeBSD. This macro calculates the size to be
compared within the frentry structure. The ipfilter 4 version of the
macro calculated the compare size based upon the static size of the
frentry struct. Today it uses the ipfilter 5 method of calculating the
size based upon the new to ipfilter 5 fr_size value found in the
frentry struct itself.
No effective change in code is intended.
MFC after: 1 week
TLB entry. Specifically, at the start of pmap_enter_quick_locked(), we
would sometimes have a TLB entry for an invalid PTE, and we would need to
issue a TLB invalidation before exiting pmap_enter_quick_locked(). However,
we should never have a TLB entry for an invalid PTE. r349905 has addressed
the root cause of the problem, and so we no longer need this workaround.
X-MFC after: r349905
NetBSD and OpenBSD have libc wrapper functions for the ARM_SYNC_ICACHE and
ARM_DRAIN_WRITEBUF sysarch operations. This change adds compatible functions
to our library. This should make it easier for various upstream sources to
support *BSD operating systems with a single variation of cache maintence
code in tools like interpreters and JIT compilers.
I consider the argument types passed to arm_sync_icache() to be especially
unfortunate, but this is intended to match the other BSDs.
Differential Revision: https://reviews.freebsd.org/D20906
Accept an IEEE Extended Unique Identifier (EUI-64) from the command
line for each NVMe namespace. If one isn't provided, it will create one
based on the CRC16 of:
- the FreeBSD IEEE OUI
- PCI bus, device/slot, function values
- Namespace ID
Reviewed by: imp, araujo, jhb, rgrimes
Approved by: imp (mentor), jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19905
The only consumer of moea64_pvo_remove_from_page_locked() already has the
page in hand, so there is no need to search for the page while holding the
lock. Drop the wrapper, and rename _moea64_pvo_remove_from_page_locked().
Reported by: alc
Summary:
Since the 'page pv' lock is one of the most highly contended locks, we
need to try to do as much work outside of the lock as we can. The
moea64_pvo_remove_from_page() path is a low hanging fruit, where we can
do some heavy work (PHYS_TO_VM_PAGE()) outside of the lock if needed.
In one path, moea64_remove_all(), the PV lock is already held and can't
be swizzled, so we provide two ways to perform the locked operation, one
that can call PHYS_TO_VM_PAGE outside the lock, and one that calls with
the lock already held.
Reviewed By: luporl
Differential Revision: https://reviews.freebsd.org/D20694
Summary:
If an illegal instruction is encountered on a process running on a
powerpc64 kernel it would attempt to sync the cache before retrying the
instruction "just in case". However, since curpmap is not set, when
moea64_sync_icache() attempts to lock the pmap, it's locking on a NULL pointer,
triggering a panic. Fix this by adding a (assumed unnecessary) fallback to
curthread's pmap in moea64_sync_icache().
Reported by: alfredo.junior_eldorado.org.br
Reviewed by: luporl, alfredo.junior_eldorado.org.br
Differential Revision: https://reviews.freebsd.org/D20911
The driver used to log any non-zero cause and when running with a single
line interrupt it would spam the console/logs with reports of interrupts
that are of no interest to anyone.
MFC after: 1 week
Sponsored by: Chelsio Communications
Casueword(9) on ll/sc architectures must be prepared for userspace
constantly modifying the same cache line as containing the CAS word,
and not loop infinitely. Otherwise, rogue userspace livelocks the
kernel.
To fix the issue, change casueword(9) interface to return new value 1
indicating that either comparision or store failed, instead of relying
on the oldval == *oldvalp comparison. The primitive no longer retries
the operation if it failed spuriously. Modify callers of
casueword(9), all in kern_umtx.c, to handle retries, and react to
stops and requests to terminate between retries.
On x86, despite cmpxchg should not return spurious failures, we can
take advantage of the new interface and just return PSL.ZF.
Reviewed by: andrew (arm64, previous version), markj
Tested by: pho
Reported by: https://xenbits.xen.org/xsa/advisory-295.txt
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D20772
hard-coded value. Don't allocate space for it from the kernel stack.
Account for prefix, suffix, and separator space in the name. This
takes the effective length up to 229 bytes on 13-current, and 37 bytes
on 12-stable. 37 bytes is enough to hold a full GUID string.
PR: 234134
MFC after: 1 week
Differential Revision: http://reviews.freebsd.org/D20924
- Check for ATTR_SW_MANAGED before anything else.
- Use pmap_pte_dirty() in pmap_remove_pages().
No functional change intended.
Reviewed by: alc
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
It is possible, that opcode at the ACTION_PTR() location is not real
action, but action modificator like "log", "tag" etc. In this case we
need to check for each opcode in the loop to find O_EXTERNAL_ACTION.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
Enable this for the NovAtel OEMv2 GPS receiver.
Not fixed: The receiver shows up as "<Interface 0>" in the device
tree, because that is literally what the descriptor-string is.
Reviewed by: hselasky@
The reason for this is that ipftest(8), which still works on FreeBSD-11,
fails to link to it, breaking stable/11 builds.
ipftest(8) was broken (segfault) sometime during the FreeBSD-12 cycle.
glebius@ suggested we disable building it until I can get around to
fixing it. Hence this was not caught in -current.
The intention is to fix ipftest(8) as it is used by the netbsd-tests
(imported by ngie@ many moons ago) for regression testing.
MFC after: immediately
if a retry to allocate swap space, after a larger allocation attempt failed, allocated a smaller set of free blocks
that ended on a 32- or 64-block boundary.
Add tests to detect this kind of failure-to-extend-at-boundary and prevent the associated accounting screwup.
Reported by: pho
Tested by: pho
Reviewed by: alc
Approved by: markj (mentor)
Discussed with: kib
Differential Revision: https://reviews.freebsd.org/D20893
Depending on system configuration, version, and architecture,
mds_handler might be dereferenced from doreti before
hw_mds_recalculate_boot() initialized it. Statically assign void
method to cover all cases.
Reported by: "Schuendehuette, Matthias (LDA IT PLM)" <matthias.schuendehuette@siemens.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
