Add printf() wrapper to use CR/CRLF terminators depending on whether
stdio is mapped to a tty open in raw mode.
Try to use the wrapper everywhere.
For now we leave the custom DPRINTF/WPRINTF defined by device
models, but we may remove them in the future.
Reviewed by: grehan, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22657
After increasing WARNS, building WITHOUT_TCP_WRAPPERS failed because of
some unused variables.
Reported by: Cirrus-CI (against my WIP branch)
MFC with: r356248
Sponsored by: The FreeBSD Foundation
command line option. Thanks to the removal of unnecessary information and
the organization into columns, this helps the output be more legible on
both 80 column displays and non-80 column displays. imp@ provided the
idea on this.
Highlights:
- Use MAX() for maxsock raising; small readability improvement IMO
- malloc(3) + memset(3) -> calloc(3) where appropriate
- stop casting the return value of malloc(3)
- mallloc(3) -> reallocarray(3) where appropriate
A future change may enter capability mode when forking for some of the
built-in handlers.
This change is purely in the name of noise reduction from static analyzers
that want to complain that bzero(3) is obsolete in favor of memset(3).
With this, clang-analyze at least is now noise free. WARNS= 6 also appears
to have been OK for some time now, so drop the current setting and opt for
the default.
Currently, child pids are only tracked if maxchildren is specified. As a
consequence, without a maxchild limit we do not get a notice in syslog on
children aborting abnormally. This turns out to be a great debugging aide at
times.
Children are now tracked in a LIST; the management interface is decidedly
less painful when there's no upper bound on the number of entries we may
have at the cost of one small allocation per connection.
PR: 70335
The main point here is capturing the maxchild > 0 check. A future change to
inetd will start tracking all of the child pids so that it can give proper
and consistent notification of process exit/signalling.
chargen_dg: clang-analyze is convinced that endring could be non-NULL at
entry, and thus wants to assume that rs == NULL. Just independently
initialize rs if it's NULL to appease the analyzer.
getconfigent: policy leaks on return
free_connlist: reorganize the loop to make it clear that we're not going to
access `conn` after it's been freed.
cpmip/hashval: left-shifts performed will result in UB as we take
signed 0xABC3D20F and left shift it by 5.
sep->se_policy gets a strdup'd version of policy, so we don't need it to
stick around afterwards.
While here, remove a couple of NULL checks prior to free(policy).
CID: 1006865
MFC after: 3 days
While the mailer is normally opened/set if the mailto is set, this is not
the case if the grandchild actually didn't produce any output. This change
corrects the situation to only attempt to kill/close the mail process if it
was actually opened in the first place.
The reporter initially stumbled on the -n (suppress mail on success) flag
leading to a SIGKILL of the process group, but simultaneously
discovered/reported the behavior with !-n jobs if MAILTO was set and no
output happened.
All of these places that are checking mailto should actually be checking
whether mail is set, so do that for consistency+correctness.
This set of bugs were introduced by r352668.
Submitted by: sigsys@gmail.com
Reported by: sigsys@gmail.com
This is based on DragonFly's implementation from about 2019-09-13. It
only contains the basic code and header information to identify the
disks.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D13369
exfat is fundamentally the same design as fat32. The superblock differs
marginally, and there are some additional optional features irrelevant to
fstype(8); the structure of dirents has changed slightly to enable, among
other things, larger files; the directory entries are no longer DOS 8.3
ASCII or local 8-bit encoding, but instead explicitly UCS-2-LE.
(As a result, this change uses iconv to convert a found exfat volume label
to the user's locale.)
Locating the volume label is identical to FAT32: locate the root directory
and walk through dirents until you find a volume label. Like FAT32, follow
the FAT chain between root directory clusters as necessary.
PR: 242225
Reported by: Victor Sudakov <vas AT sibptus.ru>
Update all the references to NFSv4.1, so that they apply to NFSv4.1 and
NFSv4.2. Also, change the MDS->DS mounts to use NFSv4.2, so that both
versions of the protocol can be used against the server with pNFS enabled.
This is a content change.
Include references to NFSv4.2 and Flexible File layout, plus clarify
when vfs.nfsd.flexlinuxhack needs to be set for Linux pNFS clients.
Also update the man page to reflect the addition of SpaceUsed to the
attributes stored in the extended attribute on the MDS (r354158).
This is a content change.
Include references to NFSv4.2 and associated RFCs.
Also clarify when a Linux client needs to set vfs.nfsd.flexlinuxhack if
a pNFS server is in use.
This is a content change.
Parse out the VSEC. If the user invokes a second -c command line option,
do a hex dump of the vendor data.
Reviewed by: imp
MFC after: 3 days
Sponsored by: Intel
Differential Revision: http://reviews.freebsd.org/D22808
- Allow the userland hypervisor to intercept breakpoint exceptions
(BP#) in the guest. A new capability (VM_CAP_BPT_EXIT) is used to
enable this feature. These exceptions are reported to userland via
a new VM_EXITCODE_BPT that includes the length of the original
breakpoint instruction. If userland wishes to pass the exception
through to the guest, it must be explicitly re-injected via
vm_inject_exception().
- Export VMCS_ENTRY_INST_LENGTH as a VM_REG_GUEST_ENTRY_INST_LENGTH
pseudo-register. Injecting a BP# on Intel requires setting this to
the length of the breakpoint instruction. AMD SVM currently ignores
writes to this register (but reports success) and fails to read it.
- Rework the per-vCPU state tracked by the debug server. Rather than
a single 'stepping_vcpu' global, add a structure for each vCPU that
tracks state about that vCPU ('stepping', 'stepped', and
'hit_swbreak'). A global 'stopped_vcpu' tracks which vCPU is
currently reporting an event. Event handlers for MTRAP and
breakpoint exits loop until the associated event is reported to the
debugger.
Breakpoint events are discarded if the breakpoint is not present
when a vCPU resumes in the breakpoint handler to retry submitting
the breakpoint event.
- Maintain a linked-list of active breakpoints in response to the GDB
'Z0' and 'z0' packets.
Reviewed by: markj (earlier version)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D20309
The !USE_OPENSSL_CRYPTO_RAND path uses arc4random_buf() correctly.
In general, we should prefer to avoid things OpenSSL does poorly when a good
alternative exists in libc.
This doesn't appear to have some active upstream (and it's a steaming pile of
bad 90s crypto design). Rip out the completely horrible bits and leave the
only mildly less horrible bits. The whole thing should probably be deleted; to
the extent it purports to provide a security feature: it doesn't.
<sys.mk> defines ECHO=echo when not using make -s, and ECHO=true when using
make -s.
export ECHO for ntp products and use it in the mkver script to echo the
version. This suppresses the output as appropriate. ECHO is given a default
value to make sure things still work as expected for anyone that isn't
redefining ECHO.
Reviewed by: cy
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22101
VFs return zero for the memory enable bit even if it has been set by a
prior write. After r348779 this caused the annoying behavior that a
guest OS would unintentionally disable memory decoding on a future
read-modify-write operation on the command register. Instead, return
the shadow value of the command register for reads. This ensures that
the guest will only toggle the state of the memory enable bit when it
specifically intends to do so.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
Previously kbdmap had a localized menu heading ("Choose your keyboard
layout") but not the dialog title ("Keyboard Menu").
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
Some of the printf statements only use LF to get a newline. However, a CR character is also required for the serial console to print debug logs in a nice way.
Fix those code locations that only use LF, by adding a CR character.
Reviewed by: markj, aleksandr.fedorov@itglobal.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22552
When using sysrc to modify a file, the file should be created silently.
However, with the introduction of SVN r335280, an error of "No such file
or directory" would appear despite everything else working as-expected.
The nature of this spurious error is that SVN r335280 did not check if
the file exists first, before trying to fixup the line-endings in the
file just prior to modification.
PR: bin/240875
Reported by: Jose Luis Duran
MFC after: 3 days
