Commit Graph

177 Commits

Author SHA1 Message Date
rmacklem
4876fd20a9 Fix two known problems in clnt_rc.c, plus issues w.r.t. smp noted
during reading of the code. Change the code so that it never accesses
rc_connecting, rc_closed or rc_client when the rc_lock mutex is not held.
Also, it now performs the CLNT_CLOSE(client) and CLNT_RELEASE(client)
calls after the rc_lock mutex has been released, since those calls do
msleep()s with another mutex held. Change clnt_reconnect_call() so that
releasing the reference count is delayed until after the
"if (rc->rc_client == client)" check, so that rc_client cannot have been
recycled.

Tested by:	pho
Reviewed by:	dfr
Approved by:	kib (mentor)
2009-06-25 00:28:43 +00:00
rmacklem
a5268d56f6 If the initial attempt to refresh credentials in the RPCSEC_GSS client
side fails, the entry in the cache is left with no valid context
(gd_ctx == GSS_C_NO_CONTEXT). As such, subsequent hits on the cache
will result in persistent authentication failure, even after the user has
done a kinit or similar and acquired a new valid TGT. This patch adds a test
for that case upon a cache hit and calls rpc_gss_init() to make another
attempt at getting valid credentials. It also moves the setting of gc_proc
to before the import of the principal name to ensure that, if that case
fails, it will be detected as a failure after going to "out:".

Reviewed by:	dfr
Approved by:	kib (mentor)
2009-06-24 18:30:14 +00:00
rmacklem
b892ccc414 Delete the declaration of an unused variable so that it will build.
Approved by:	rwatson (mentor)
2009-06-20 17:16:29 +00:00
brooks
f53c1c309d Rework the credential code to support larger values of NGROUPS and
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively.  (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)

The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer.  Do the equivalent in
kinfo_proc.

Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively.  Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary.  In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.

Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups.  When feasible, truncate
the group list rather than generating an error.

Minor changes:
  - Reduce the number of hand rolled versions of groupmember().
  - Do not assign to both cr_gid and cr_groups[0].
  - Modify ipfw to cache ucreds instead of part of their contents since
    they are immutable once referenced by more than one entity.

Submitted by:	Isilon Systems (initial implementation)
X-MFC after:	never
PR:		bin/113398 kern/133867
2009-06-19 17:10:35 +00:00
rmacklem
d88296a89f Since svc_[dg|vc|tli|tp]_create() did not hold a reference count on the
SVCXPTR structure returned by them, it was possible for the structure
to be free'd before svc_reg() had been completed using the structure.
This patch acquires a reference count on the newly created structure
that is returned by svc_[dg|vc|tli|tp]_create(). It also
adds the appropriate SVC_RELEASE() calls to the callers, except the
experimental nfs subsystem. The latter will be committed separately.

Submitted by:	dfr
Tested by:	pho
Approved by:	kib (mentor)
2009-06-17 22:50:26 +00:00
rmacklem
91a5303162 Replace the global references to "hostid" in svc_rpcsec_gss.c to local
variables set via the getcredhostid() function. I also changed the type
of ci_hostid to "unsigned long" so that it matches what is returned by
getcredhostid(). Although "struct svc_rpc_gss_clientid" goes on the wire
during RPCSEC_GSS, it is just a variable # of opaque bytes to the client,
so it doesn't matter how much storage ci_hostid uses.

Approved by:	kib (mentor)
2009-06-15 14:44:55 +00:00
rmacklem
8ad39414af When a Solaris10 client does an NFS mount using krb5i or krb5p, the
server would crash because the Solaris10 client would attempt to use
Sun's NFSACL protocol, which FreeBSD doesn't support. When the server
generated the error reply via svcerr_noprog(), it would cause a crash
because it would try and wrap a NULL reply. According to RFC2203, no
wrapping is required for error cases. This one line change avoids
wrapping of NULL replies.

Reviewed by:	dfr
Approved by:	kib (mentor)
2009-06-13 23:16:40 +00:00
rmacklem
6e30b78167 For the case where another thread was doing a connect and that
connect failed, the thread would be left stuck in msleep()
indefinitely, since it would call msleep() again for the case
where rc_client == NULL. Change the loop criteria and the if just
after the loop, so that this case is handled correctly.

Reviewed by:	dfr
Approved by:	kib (mentor)
2009-06-10 19:02:09 +00:00
rwatson
23373fdcc8 Add a temporary workaround for panics being seen on NFS servers with ZFS,
where an improperly initialized prison field could lead to a panic.  This
is not the correct solution, since it fails to address similar problems
for both AUDIT and MAC, which also rely on properly initialized
credentials, but should reduce panic reports while we work that out.

Reported by:	ps, kan, others
2009-06-07 20:51:31 +00:00
rmacklem
8fb24ef4a3 Add a check to xprt_unregister() to catch the case where another
thread has already unregistered the structure. Also add a KASSERT()
to xprt_unregister_locked() to check that the structure hasn't already
been unregistered.

Reviewed by:	jhb
Tested by:	pho
Approved by:	kib (mentor)
2009-06-07 20:38:41 +00:00
rmacklem
b7262a05e5 Fix a lockorder reversal I introduced in r193436 when I moved the
mtx_destroy() of the pool mutex to after SVC_RELEASE(), because
the pool mutex was still locked when soclose() was called by svc_dg_destroy().
To fix this, an mtx_unlock() was added where mtx_destroy() was before
r193436.

Reviewed by:	jhb
Tested by:	pho
Approved by:	rwatson (mentor)
2009-06-07 01:06:56 +00:00
rwatson
6f068cf2c4 Correct MAC compile problems resulting from the new RPC code copying and
pasting code from the general socket code without also bringing along
required opt_mac.h includes.
2009-06-05 14:29:49 +00:00
rmacklem
981682577c Fix upcall races in the client side krpc. For the client side upcall,
holding SOCKBUF_LOCK() isn't sufficient to guarantee that there is
no upcall in progress, since SOCKBUF_LOCK() is released/re-acquired
in the upcall. An upcall reference counter was added to the upcall
structure that is incremented at the beginning of the upcall and
decremented at the end of the upcall. As such, a reference count == 0
when holding the SOCKBUF_LOCK() guarantees there is no upcall in
progress. Add a function that is called just after soupcall_clear(),
which waits until the reference count == 0.
Also, move the mtx_destroy() down to after soupcall_clear(), so that
the mutex is not destroyed before upcalls are done.

Reviewed by:	dfr, jhb
Tested by:	pho
Approved by:	kib (mentor)
2009-06-04 14:49:27 +00:00
rmacklem
4df6c5e1fc Fix two races in the server side krpc w.r.t upcalls:
Add a flag so that soupcall_clear() is only called once to cancel
  an upcall.
  Move the test for xprt_registered in the upcall down to after the
  mtx_lock() of the pool mutex, to catch the case where it is
  unregistered while the upcall is waiting for the mutex.
Also, move the mtx_destroy() of the pool mutex to after SVC_RELEASE(),
so that it isn't destroyed before the upcalls are disabled.

Reviewed by:	dfr, jhb
Tested by:	pho
Approved by:	kib (mentor)
2009-06-04 14:13:06 +00:00
rwatson
0f9e858440 Add internal 'mac_policy_count' counter to the MAC Framework, which is a
count of the number of registered policies.

Rather than unconditionally locking sockets before passing them into MAC,
lock them in the MAC entry points only if mac_policy_count is non-zero.

This avoids locking overhead for a number of socket system calls when no
policies are registered, eliminating measurable overhead for the MAC
Framework for the socket subsystem when there are no active policies.

Possibly socket locks should be acquired by policies if they are required
for socket labels, which would further avoid locking overhead when there
are policies but they don't require labeling of sockets, or possibly
don't even implement socket controls.

Obtained from:	TrustedBSD Project
2009-06-02 18:26:17 +00:00
jhb
a1af9ecca4 Rework socket upcalls to close some races with setup/teardown of upcalls.
- Each socket upcall is now invoked with the appropriate socket buffer
  locked.  It is not permissible to call soisconnected() with this lock
  held; however, so socket upcalls now return an integer value.  The two
  possible values are SU_OK and SU_ISCONNECTED.  If an upcall returns
  SU_ISCONNECTED, then the soisconnected() will be invoked on the
  socket after the socket buffer lock is dropped.
- A new API is provided for setting and clearing socket upcalls.  The
  API consists of soupcall_set() and soupcall_clear().
- To simplify locking, each socket buffer now has a separate upcall.
- When a socket upcall returns SU_ISCONNECTED, the upcall is cleared from
  the receive socket buffer automatically.  Note that a SO_SND upcall
  should never return SU_ISCONNECTED.
- All this means that accept filters should now return SU_ISCONNECTED
  instead of calling soisconnected() directly.  They also no longer need
  to explicitly clear the upcall on the new socket.
- The HTTP accept filter still uses soupcall_set() to manage its internal
  state machine, but other accept filters no longer have any explicit
  knowlege of socket upcall internals aside from their return value.
- The various RPC client upcalls currently drop the socket buffer lock
  while invoking soreceive() as a temporary band-aid.  The plan for
  the future is to add a new flag to allow soreceive() to be called with
  the socket buffer locked.
- The AIO callback for socket I/O is now also invoked with the socket
  buffer locked.  Previously sowakeup() would drop the socket buffer
  lock only to call aio_swake() which immediately re-acquired the socket
  buffer lock for the duration of the function call.

Discussed with:	rwatson, rmacklem
2009-06-01 21:17:03 +00:00
kmacy
3b9ffe972e fix xdrmem_control to be safe in an if statement
fix zfs to depend on krpc
remove xdr from zfs makefile

Submitted by:	dchagin@freebsd.org
2009-05-30 22:23:58 +00:00
jamie
572db1408a Place hostnames and similar information fully under the prison system.
The system hostname is now stored in prison0, and the global variable
"hostname" has been removed, as has the hostname_mtx mutex.  Jails may
have their own host information, or they may inherit it from the
parent/system.  The proper way to read the hostname is via
getcredhostname(), which will copy either the hostname associated with
the passed cred, or the system hostname if you pass NULL.  The system
hostname can still be accessed directly (and without locking) at
prison0.pr_host, but that should be avoided where possible.

The "similar information" referred to is domainname, hostid, and
hostuuid, which have also become prison parameters and had their
associated global variables removed.

Approved by:	bz (mentor)
2009-05-29 21:27:12 +00:00
kmacy
189b8f192f MFdevbranch 192944
- add FreeBSD implementation of xdrmem_control needed by zfs
 - have zfs define xdr_ops using FreeBSD's definition
 - remove solaris xdr files from zfs compile
2009-05-28 08:18:12 +00:00
rwatson
ccb17e335a Remove the unmaintained University of Michigan NFSv4 client from 8.x
prior to 8.0-RELEASE.  Rick Macklem's new and more feature-rich NFSv234
client and server are replacing it.

Discussed with:	rmacklem
2009-05-22 12:35:12 +00:00
rmacklem
481d50cc5b Added a field to the SVCXPRT structure that the nfsv4 server can
use to identify if the socket is the same one that a cached request
	came in on. It is set by nfsrvd_addsock() to a unique value generated
	by incrementing an unsigned 64bit static variable for each assignment
	and then the value of xp_sockref is tested to see if it is equal to
	the value that was saved with the cached reply.

Submitted by:	rmacklem
Reviewed by:	dfr
Approved by:	kib (mentor)
2009-04-16 16:26:35 +00:00
dfr
2926f8fa43 Use the correct creds when reconnecting so that we have enough privilege to
bind reserved ports (if necessary).

Submitted by:	Jaakko Heinonen <jh at saualaht dot fi>
2009-02-05 11:48:10 +00:00
dfr
83bb8e9bfc Add a missing call to mtx_destroy(). 2008-11-12 12:21:18 +00:00
dfr
2fb03513fc Implement support for RPCSEC_GSS authentication to both the NFS client
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager.  I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.

The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.

To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.

As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.

Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.

The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.

Sponsored by:	Isilon Systems
MFC after:	1 month
2008-11-03 10:38:00 +00:00
des
66f807ed8b Retire the MALLOC and FREE macros. They are an abomination unto style(9).
MFC after:	3 months
2008-10-23 15:53:51 +00:00
zec
8797d4caec Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by:	julian, bz, brooks, zec
Reviewed by:	julian, bz, brooks, kris, rwatson, ...
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
dfr
b9dfa1bea1 Rename RPC's 'struct pmap' to 'struct portmap' to avoid confusing it with
the other 'struct pmap'.

Pointed out by:	kmacy
MFC after:	2 weeks
2008-08-25 09:36:17 +00:00
kris
14af2b99b4 Rename the static M_RPC defined here to M_RPCCLNT, since a global M_RPC
now optionally exists.

Reviewed by:	dfr
MFC after:	3 days
2008-08-18 12:11:47 +00:00
bz
1021d43b56 Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00
dfr
c7b8f980d8 Add a missing call to mtx_destroy() in clnt_reconnect_destroy().
Submitted by:	zachary.loafman at isilon.com
MFC after:	2 weeks
2008-08-13 12:04:54 +00:00
dfr
d27f65928a Re-work the code slightly to avoid a possible livelock.
MFC after:	2 weeks
2008-07-23 09:18:08 +00:00
ed
1e4302f67a Move the NFS/RPC code away from lbolt.
The kernel has a special wchan called `lbolt', which is triggered each
second. It doesn't seem to be used a lot and it seems pretty redundant,
because we can specify a timeout value to the *sleep() routines. In an
attempt to eventually remove lbolt, make the NFS/RPC code use a timeout
of `hz' when trying to reconnect.

Only the TTY code (not MPSAFE TTY) and the VFS syncer seem to use lbolt
now.

Reviewed by:	attilio, jhb
Approved by:	philip (mentor), alfred, dfr
2008-07-22 21:27:22 +00:00
rwatson
051819b847 Introduce a new lock, hostname_mtx, and use it to synchronize access
to global hostname and domainname variables.  Where necessary, copy
to or from a stack-local buffer before performing copyin() or
copyout().  A few uses, such as in cd9660 and daemon_saver, remain
under-synchronized and will require further updates.

Correct a bug in which a failed copyin() of domainname would leave
domainname potentially corrupted.

MFC after:	3 weeks
2008-07-05 13:10:10 +00:00
julian
bacd933e9c It may be #if 0'd out code, but change a varname to not shadow a global. 2008-06-29 01:04:48 +00:00
dfr
32cc4e0a28 Include <sys/pcpu.h> for curthread. 2008-06-27 14:35:05 +00:00
dfr
41cea6d5ca Re-implement the client side of rpc.lockd in the kernel. This implementation
provides the correct semantics for flock(2) style locks which are used by the
lockf(1) command line tool and the pidfile(3) library. It also implements
recovery from server restarts and ensures that dirty cache blocks are written
to the server before obtaining locks (allowing multiple clients to use file
locking to safely share data).

Sponsored by:	Isilon Systems
PR:		94256
MFC after:	2 weeks
2008-06-26 10:21:54 +00:00
dfr
5dd963773a Fix some issues that showed up during Kris' testing.
Reported by:	kris
MFC after:	3 days
2008-04-11 10:34:59 +00:00
dfr
3d7f9d1b14 Minor changes to improve compatibility with older FreeBSD releases. 2008-03-28 09:50:32 +00:00
dfr
dc98ee4196 Add kernel module support for nfslockd and krpc. Use the module system
to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user can still
force the use of the old user NLM by building a kernel without NFSLOCKD
and/or removing the nfslockd.ko module.
2008-03-27 11:54:20 +00:00
dfr
79d2dfdaa6 Add the new kernel-mode NFS Lock Manager. To use it instead of the
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.

Highlights include:

* Thread-safe kernel RPC client - many threads can use the same RPC
  client handle safely with replies being de-multiplexed at the socket
  upcall (typically driven directly by the NIC interrupt) and handed
  off to whichever thread matches the reply. For UDP sockets, many RPC
  clients can share the same socket. This allows the use of a single
  privileged UDP port number to talk to an arbitrary number of remote
  hosts.

* Single-threaded kernel RPC server. Adding support for multi-threaded
  server would be relatively straightforward and would follow
  approximately the Solaris KPI. A single thread should be sufficient
  for the NLM since it should rarely block in normal operation.

* Kernel mode NLM server supporting cancel requests and granted
  callbacks. I've tested the NLM server reasonably extensively - it
  passes both my own tests and the NFS Connectathon locking tests
  running on Solaris, Mac OS X and Ubuntu Linux.

* Userland NLM client supported. While the NLM server doesn't have
  support for the local NFS client's locking needs, it does have to
  field async replies and granted callbacks from remote NLMs that the
  local client has contacted. We relay these replies to the userland
  rpc.lockd over a local domain RPC socket.

* Robust deadlock detection for the local lock manager. In particular
  it will detect deadlocks caused by a lock request that covers more
  than one blocking request. As required by the NLM protocol, all
  deadlock detection happens synchronously - a user is guaranteed that
  if a lock request isn't rejected immediately, the lock will
  eventually be granted. The old system allowed for a 'deferred
  deadlock' condition where a blocked lock request could wake up and
  find that some other deadlock-causing lock owner had beaten them to
  the lock.

* Since both local and remote locks are managed by the same kernel
  locking code, local and remote processes can safely use file locks
  for mutual exclusion. Local processes have no fairness advantage
  compared to remote processes when contending to lock a region that
  has just been unlocked - the local lock manager enforces a strict
  first-come first-served model for both local and remote lockers.

Sponsored by:	Isilon Systems
PR:		95247 107555 115524 116679
MFC after:	2 weeks
2008-03-26 15:23:12 +00:00
ru
3b1bf8c2e9 Replaced the misleading uses of a historical artefact M_TRYWAIT with M_WAIT.
Removed dead code that assumed that M_TRYWAIT can return NULL; it's not true
since the advent of MBUMA.

Reviewed by:	arch

There are ongoing disputes as to whether we want to switch to directly using
UMA flags M_WAITOK/M_NOWAIT for mbuf(9) allocation.
2008-03-25 09:39:02 +00:00
rwatson
23574c8673 Remove the now-unused NET_{LOCK,UNLOCK,ASSERT}_GIANT() macros, which
previously conditionally acquired Giant based on debug.mpsafenet.  As that
has now been removed, they are no longer required.  Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.

While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option.  Clean up some related gotos for
consistency.

Reviewed by:	bz, csjp
Tested by:	kris
Approved by:	re (kensmith)
2007-08-06 14:26:03 +00:00
mjacob
2865ae0149 Check for a NULL return from rpcclnt_buildheader- it can fail if
the passed in auth_type is unacceptable to rpcauth_buildheader-
this avoids a null pointer panic. Clean up allocations if this
happens. This also quiets a gcc 4.2 complaint about ussing mheadend
without it being initialized.

Reviewed by:	alfred
2007-06-16 05:42:26 +00:00
pjd
c22a6a4408 Move rpc/types.h under sys/, as this is used by ZFS kernel module.
Repo-copied by:	simon
2007-04-10 22:10:16 +00:00
rwatson
95d0d388ac Replace GIANT_REQUIRED's present for socket locking with NET_LOCK_GIANT().
If/when someone does the necessary MPSAFEty locking for the NFSv4 client,
the socket code is generally MPSAFE now.

Spotted by:	kris
2007-03-25 21:44:24 +00:00
rees
56d35a6f8c Fix up some cut-n-paste damage and some out-of-date comments.
No code changes.

Submitted by:	cel@citi.umich.edu
2006-01-20 15:20:41 +00:00
rees
f4bb03bde0 Use thread0 instead of user's thread for sobind.
This fixes reconnect after, for example, tcp idle disconnection.
Previously this would fail if a normal user tried to bind to a privileged
port.

Submitted by:	cel@citi.umich.edu
MFC after:	1 week
2006-01-20 15:17:46 +00:00
ru
522e9c2b7b Fix -Wundef. 2005-12-04 02:12:43 +00:00
rwatson
c479a90eb8 Add GIANT_REQUIRED and WITNESS sleep warnings to uprintf() and tprintf(),
as they both interact with the tty code (!MPSAFE) and may sleep if the
tty buffer is full (per comment).

Modify all consumers of uprintf() and tprintf() to hold Giant around
calls into these functions.  In most cases, this means adding an
acquisition of Giant immediately around the function.  In some cases
(nfs_timer()), it means acquiring Giant higher up in the callout.

With these changes, UFS no longer panics on SMP when either blocks are
exhausted or inodes are exhausted under load due to races in the tty
code when running without Giant.

NB: Some reduction in calls to uprintf() in the svr4 code is probably
desirable.

NB: In the case of nfs_timer(), calling uprintf() while holding a mutex,
or even in a callout at all, is a bad idea, and will generate warnings
and potential upset.  This needs to be fixed, but was a problem before
this change.

NB: uprintf()/tprintf() sleeping is generally a bad ideas, as is having
non-MPSAFE tty code.

MFC after:	1 week
2005-09-19 16:51:43 +00:00
das
31c9390595 - Don't call rpcclnt_realign() if we don't have any mbufs to realign.
- Remove a bogus and unneeded null pointer check.

Found by:	Coverity Prevent analysis tool
Approved by:	alfred
2005-03-19 01:16:25 +00:00
imp
f0bf889d0d /* -> /*- for license, minor formatting changes 2005-01-07 02:29:27 +00:00
stefanf
fc52c1f7c1 Prefer C99's __func__ over GCC's __FUNCTION__.
Approved by:	alfred
2004-09-23 18:25:46 +00:00
rees
f24213beb7 fix array index out of bounds in rpc->rc_srtt[], rpc->rc_sdrtt[]
Noticed by: tedu
Approved by: alfred
2004-07-15 22:21:25 +00:00
rwatson
f1f1364540 Constify 'rpcclnt_backoff'. 2004-07-12 19:37:08 +00:00
imp
ebf059d1df Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 05:00:01 +00:00
kan
97b7fb767e Reset callout if in nfs_timeout and rpcclnt_timeout functions. Timer
are supposed to continue firing as long as there is work to do, not
stop after the first invocation.

This is damage control after a patch that has been committed prematurely.

Tested by:	kris
2004-03-28 05:55:27 +00:00
rees
4bf96c35a5 only do nfs rpc callouts if there is work to do.
Submitted by:	kan
Approved by:	alfred
2004-03-25 21:48:09 +00:00
peter
36be86fb0a Calculate NFS timeouts in units of 10ms, not 5ms. This matches the default
clock precision on i386.  This is a NOP change on i386.  But this stops
the mount_nfs units from suddenly changing to units of 1/20 of a second
(vs the normal 1/10 of a second) if HZ is increased.
2004-03-14 06:21:56 +00:00
kan
edfb020c30 Convert from timeout to callout API. 2004-03-07 16:23:03 +00:00
alfred
ffaedccd58 Don't panic because of RPC proto mismatches. Whitespace cleanup.
Submitted by: Jim Rees <rees@umich.edu>
2004-01-17 21:25:05 +00:00
alfred
7dfc5abc07 Prevent a panic when mounting a v2/v3 only server with mount_nfs4.
Submitted by: Jim Rees <rees@umich.edu>
Reported/testing: Florian C. Smeets <flo@kasimir.com>
2004-01-13 01:04:36 +00:00
alfred
0447b5115d Fix a panic when attempting a v4 op against a v3/v2-only server.
It happens because rpcclnt_request is incorrectly returning 0 in the case
of an rpc mismatch or auth error.

Submitted by: Jim Rees <rees@umich.edu>
2004-01-10 02:59:54 +00:00
marcel
89b1ef2eaa Change the definition of NULL on ia64 (for LP64 compilations) from
an int constant to a long constant. This change improves consistency
in the following two ways:
1. The first 8 arguments are always passed in registers on ia64, which
   by virtue of the generated code implicitly widens ints to longs and
   allows the use of an 32-bit integral type for 64-bit arguments.
   Subsequent arguments are passed onto the memory stack, which does
   not exhibit the same behaviour and consequently do not allow this.
   In practice this means that variadic functions taking pointers
   and given NULL (without cast) work as long as the NULL is passed
   in one of the first 8 arguments. A SIGSEGV is more likely the
   result if such would be done for stack-based arguments. This is
   due to the fact that the upper 4 bytes remain undefined.
2. All 64-bit platforms that FreeBSD supports, with the obvious
   exception of ia64, allow 32-bit integral types (specifically NULL)
   when 64-bit pointers are expected in variadic functions by way of
   how the compiler generates code. As such, code that works correctly
   (whether rightfully so or not) on any platform other than ia64, may
   fail on ia64.

To more easily allow tweaking of the definition of NULL, this commit
removes the 12 definitions in the various headers and puts it in a
new header that can be included whenever NULL is to be made visible.

This commit fixes GNOME, emacs, xemacs and a whole bunch of ports
that I don't particularly care about at this time...
2003-12-07 21:10:06 +00:00
alfred
26c79419e1 Remove unneeded file. (could be repo removed as nothing ever referenced it.)
Submitted by: Jim Rees <rees@umich.edu>
2003-11-20 04:42:50 +00:00
alfred
9059a984da Use %zu to printf a size_t instead of an int cast.
Requested by: jmallett, wollman
2003-11-15 01:58:47 +00:00
alfred
6763fe0b20 Fix compilation warnings on sparc.
Cast sizeof to int for printing with %d.
2003-11-15 01:24:46 +00:00
alfred
5b076fe9da University of Michigan's Citi NFSv4 kernel client code.
Submitted by: Jim Rees <rees@umich.edu>
2003-11-14 20:54:10 +00:00
alfred
f67e4a8fc7 Bring in a hybrid of SunSoft's transport-independent RPC (TI-RPC) and
associated changes that had to happen to make this possible as well as
bugs fixed along the way.

  Bring in required TLI library routines to support this.

  Since we don't support TLI we've essentially copied what NetBSD
  has done, adding a thin layer to emulate direct the TLI calls
  into BSD socket calls.

  This is mostly from Sun's tirpc release that was made in 1994,
  however some fixes were backported from the 1999 release (supposedly
  only made available after this porting effort was underway).

  The submitter has agreed to continue on and bring us up to the
  1999 release.

  Several key features are introduced with this update:
    Client calls are thread safe. (1999 code has server side thread
    safe)
    Updated, a more modern interface.

  Many userland updates were done to bring the code up to par with
  the recent RPC API.

  There is an update to the pthreads library, a function
  pthread_main_np() was added to emulate a function of Sun's threads
  library.

  While we're at it, bring in NetBSD's lockd, it's been far too
  long of a wait.

  New rpcbind(8) replaces portmap(8) (supporting communication over
  an authenticated Unix-domain socket, and by default only allowing
  set and unset requests over that channel). It's much more secure
  than the old portmapper.

  Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
  to support TI-RPC and to support IPV6.

  Umount(8) is also fixed to unmount pathnames longer than 80 chars,
  which are currently truncated by the Kernel statfs structure.

Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul
2001-03-19 12:50:13 +00:00
peter
d4e3ebaf0a $Id$ -> $FreeBSD$ 1999-08-27 23:45:13 +00:00
wpaul
db46899f5a Resolve conflicts. 1997-05-28 04:45:15 +00:00
peter
f173325ac8 Revert $FreeBSD$ to $Id$ 1997-02-23 09:21:14 +00:00
jkh
808a36ef65 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
peter
bd9931aed2 First commit of a series of cleanups for the libc rpc code which has been
suffering a bad case neglect for the last few years.

- Add full prototypes, including to function pointers.
- Make the wire protocols 64-bit type safe, eg: 32 bit quantities are
  int32_t, not long.  The orginal rpc code was implemented when an int
  could be 16 bits.

Obtained from: a diff of FreeBSD vs. OpenBSD/NetBSD rpc code.
1996-12-30 13:59:41 +00:00
mpp
d6779c281f Fix a bunch of spelling errors in the comment fields
of a bunch of system include files.
1996-01-30 23:33:04 +00:00
rgrimes
2ad6f3dee6 Remove trailing whitespace. 1995-05-30 05:05:38 +00:00
wollman
2914d85c79 Use the header files that are compatible with the code just moved over
from 1.1.5.
1994-08-07 18:41:02 +00:00
wollman
4e7c0a8db9 Install RPC headers from include, like they always should have been. 1994-08-04 20:39:34 +00:00