r259657:
Add suspend/resume capabilities to the ATI backlight ppc driver.
With this, also shut off the display (DPMS-style) and disable the
clocking when the backlight level is set to 0. This is taken from the
radeonkms driver (radeon_legacy_encoders.c) which doesn't yet support
PowerPC.
r264205,r264207:
Fix the ATI backlight driver off/on handling. Now this driver works
correctly with the ATI Radeon 9700 in the PowerBook G4 1.67GHz.
Code shamelessly taken in spirit from the radeonkms driver, which I
hope will make this driver redundant in the future.
Approved by: re (marius)
Relnotes: yes (not suspend/resume, but the rest)
r261596, r261606
Add the imx sdhci controller.
Move Open Firmware device root on PowerPC, ARM, and MIPS systems to
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.
Add the missing ')' at end of sentence. Reword it to use a more common idiom.
Pass the kernel physical address to initarm through the boot param struct.
Make functions only used in vfp.c static, and remove vfp_enable.
Fix __syscall on armeb EABI. As it returns a 64-bit value it needs to
place 32-bit data in r1, not r0. 64-bit data is already packed correctly.
Use abp_physaddr for the physical address over KERNPHYSADDR. This helps us
remove the need to load the kernel at a fixed address.
Remove references to PHYSADDR where it's used only in debugging output.
Dynamically generate the page table. This will allow us to detect the
physical address we are loaded at to change the mapping.
r259199, r259484, r259513, r259514, r259516
The kernel stack guard pages are only below the stack pointer, not above.
Remove unnecessary double-setting of the thread's onfault state in
copyinstr().
Open Firmware mandates that certain cross-references, in particular those
in /chosen, be ihandles. The ePAPR spec makes those cross-reference phandles,
since FDT has no concept of ihandles. Have the OF FDT CI module interpret
queries about ihandles as cross-reference phandles.
Real OF systems have an ihandle under /chosen/stdout, not a phandle. Use
the right type.
Rearchitect platform memory map parsing to make it less
Open Firmware-centric.
Remove fdtbus_bs_tag definition, which is now obsolete. The remainder of
this file is also slated for future demolition.
Return the correct IEEE 1275 code for "nextprop".
Use the common Open Firmware PCI interrupt routing code instead of the
duplicate version in dev/fdt.
Configure interrupt sense based on device tree information.
Simplify the ofw_bus_lookup_imap() API slightly: make it allocate maskbuf
internally instead of requiring the caller to allocate it.
r258697, r258757
Do not assume a value for #address-cells when parsing the OF translations
map. This allows the kernel to get farther with OpenBIOS on 64-bit CPUs.
Actually look up #address-cells instead of assuming it is correlated with
the Uninorth version number.
#interrupt-cells belongs to the iparent, not the device parent.
Add a sysctl to allow disabling resetting the OF syscons.
For PCI<->PCI bridges, #address-cells may be 3.
Make RTAS calls, which call setfault() to recover from machine checks,
preserve any existing fault buffer.
badaddr() is used only in the grackle PCI driver, so move its definition
there. Clean up a spurious setfault() declaration as well.
This [phyp_console] driver doesn't need the /options node, so don't check
for it.
Use the Open Firmware-based CPU frequency determination as a generic
fallback if we can't measure CPU frequency. This is also useful on a
variety of embedded systems using FDT.
Be a little more suspicious of thermal sensors, which can have single
crazy readings occasionally. One wild reading should not be enough to
trigger a shutdown, so instead wait for several concerning readings in
a row.
Standards-conformance and code deduplication:
- Use bus reference phandles in place of FDT offsets as IRQ domain keys
- Unify the identical macio/fdt/mambo OpenPIC drivers into one
- Be more forgiving (following ePAPR) about what we need from the device
tree to identify an OpenPIC
- Correctly map all IRQs into an interrupt domain
- Set IRQ_*_CONFORM for interrupts on an unknown PIC type instead of
failing attachment for that device.
Allow lots of interrupts (useful on multi-domain platforms) and do not
set device_quiet() on all devices attached under nexus(4).
r260607:
The onyx codec works also as module, so add it.
r260610:
Described in the man page but not implemented. Here it comes,
atomic_swap_32/64. The latter only for powerpc64.
r260934:
Fix the resource information for the i2s-a node on certain G5 PowerMacs.
This is the first step needed to get the snapper codec working on those
machines.
The second step is to enable the corresponding I2S device and its clock.
Tested on machines where the snapper codec was already working, a G4 PowerBook
and a PowerMac9,1 with a Shasta based macio.
The PowerMac7,2/7,3 with a K2 based macio can now also play sound.
Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
Similar to the (1 << 31) case it is not defined to do (2 << 30).
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Move the resource allocation from the ata_*_probe section to the ata_*_attach
section. This prevents a boot crash on nearly all iMacs and PowerMacs/Books.
The allocation in the probe section was working before because ata_probe was
returning 0 which did not invoke a second DEVICE_PROBE. Now it returns
a BUS_PROBE_DEFAULT which can invoke a second DEVICE_PROBE which results in
a "failed to reserve resource" exit.
PR: powerpc/182978
Approved by: re(gjb)
platform modules. Whether to call this function or not is highly machine
dependent: on some systems, it is required, while on others it breaks
everything. Platform modules are in a better position to figure this
out. This is required for POWER hypervisor SCSI to work correctly. There
are no functional changes on Powermac systems.
Approved by: re (kib)
option left but actually consumed by ada(4), so move it to opt_ada.h
and get rid of opt_ata.h.
- Fix stand-alone build of atacore(4) by adding opt_cam.h.
- Use __FBSDID.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
(PowerMac12,1), which have a mac-io MPIC cell that indifies itself
as the root PIC despite the actual root PIC being on the northbridge.
No CPC945 systems have a mac-io PIC that does anything so just don't
attach on CPC945 (U4) systems.
MFC after: 3 days
These fans are not located under the same node as the the RPM controlled ones,
So I had to adapt the current source to parse and fill the properties correctly.
To control the fans we can set the PWM ratio via sysctl between 20 and 100%.
Tested by: nwhitehorn
MFC after: 3 weeks
According to the open firmware standard, finddevice call has to return
a phandle with value of -1 in case of error.
This commit is to:
- Fix the FDT implementation of this interface (ofw_fdt_finddevice) to
return (phandle_t)-1 in case of error, instead of 0 as it does now.
- Fix up the callers of OF_finddevice() to compare the return value with
-1 instead of 0 to check for errors.
- Since phandle_t is unsigned, the return value of OF_finddevice should
be checked with '== -1' rather than '<= 0' or '> 0', fix up these cases
as well.
Reported by: nwhitehorn
Reviewed by: raj
Approved by: raj, nwhitehorn
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.
event of a broken or busy fan due to returning incorrect error codes from
the FCU sysctl handler.
Reported by: Path Mather <paul at gromit dot dlib dot vt dot edu>1
Approved by: re (kib)
smell that caused me to turn this up was due to a failed fan burning, not
a CPU (plus a healthy dose of paranoia).
Submitted by: Paul Mather <paul at gromit dot dlib dot vt dot edu>
Kelvin temperature, which is impossible except for some contrived magnetic
spin systems), use the previous measurement from that sensor instead of
corrupting everything and randomly changing the fans or shutting off the
machine.
