This feature is disabled by default. To enable it, tune
hw.if_ntb.enable_xeon_watchdog to non-zero.
If enabled, writes an unused NTB register every second to demonstrate to
a hardware watchdog that the NTB device is still alive. Most machines
with NTB will not need this -- you know who you are.
Sponsored by: EMC / Isilon Storage Division
This change simplifies and unifies port adding/updating for loop and
fabric scanners. It also fixes problems with scanning restarts due to
concurrent port databases changes. It also fixes many cosmetic issues.
critical section.
uma_zalloc_arg()/uma_zalloc_free() may acquire a sleepable lock on the
zone. The malloc() family of functions may call uma_zalloc_arg() or
uma_zalloc_free().
The malloc(9) man page currently claims that free() will never sleep.
It also implies that the malloc() family of functions will not sleep
when called with M_NOWAIT. However, it is more correct to say that
these functions will not sleep indefinitely. Indeed, they may acquire
a sleepable lock. However, a developer may overlook this restriction
because the WITNESS check that catches attempts to call the malloc()
family of functions within a critical section is inconsistenly
applied.
This change clarifies the language of the malloc(9) man page to clarify
the restriction against calling the malloc() family of functions
while in a critical section or holding a spin lock. It also adds
KASSERTs at appropriate points to make the enforcement of this
restriction more consistent.
PR: 204633
Differential Revision: https://reviews.freebsd.org/D4197
Reviewed by: markj
Approved by: gnn (mentor)
Sponsored by: Juniper Networks
1024 specified on YPMAXRECORD the ypmatch can get in an infinite retry
loop when is requesting the information from the NIS server.
The ypmatch(1) will return an error until the command receives an
kill(1).
To avoid this problem, we check the MAX_RETRIES that is by default set
to 20 and avoid get in infinet loop at the client side.
NOTE: FreeBSD nis(8) server doesn't present this issue.
Submitted by: Ravi Pokala <rpokala@panasas.com>,
Lakshmi N. Sundararajan <lakshmi.n@msystechnologies.com>,
Lewis, Fred <flewis@panasas.com>,
Pushkar Kothavade <pushkar.kothavade@msystechnologies.com>
Approved by: bapt (mentor)
MFC after: 1 month
Differential Revision: D4095
default and add a manual page for mlx5en. The mlx5 module contains
shared code for both infiniband and ethernet. The mlx5en module
contains specific code for ethernet functionality only. A mlx5ib
module is in the works for infiniband support.
Supported hardware:
- ConnectX-4: 10/20/25/40/50/56/100Gb/s speeds.
- ConnectX-4 LX: 10/25/40/50Gb/s speeds (low power consumption)
Refer to the mlx5en(4) manual page for a comprehensive list.
The team porting the mlx5 driver(s) to FreeBSD:
- Hans Petter Selasky <hselasky@freebsd.org>
- Oded Shanoon <odeds@mellanox.com>
- Meny Yossefi <menyy@mellanox.com>
- Shany Michaely <shanim@mellanox.com>
- Shahar Klein <shahark@mellanox.com>
- Daria Genzel <dariaz@mellanox.com>
- Mark Bloch <markb@mellanox.com>
Differential Revision: https://reviews.freebsd.org/D4163
Submitted by: Mark Block <markb@mellanox.com>
Sponsored by: Mellanox Technologies
Reviewed by: gnn @
MFC after: 3 days
Fix zfs(8) not formatting due to wrong macro (Oc) in the syntax for the new
zfs set multiple dataset properties option.
PR: 204631
Submitted by: Thomas Eberhardt
Sponsored by: Multiplay
RX buffers from number of received packets.
Differential Revision: https://reviews.freebsd.org/D4178
Submitted by: Drew Gallatin <gallatin@freebsd.org>
Sponsored by: Mellanox Technologies
MFC after: 3 days
Setting sysctl dev....conf.hw_lro may fail if the net device lro is
turned off. Due to the nature of our sysctl handler we need to set the
values back to 0 and issue an error.
Differential Revision: https://reviews.freebsd.org/D4177
Submitted by: Shahar Klein <shahark@mellanox.com>
Sponsored by: Mellanox Technologies
MFC after: 3 days
This is useful in environments where system configuration is performed by
automated interaction with the system console, since unexpected witness
output makes such automation difficult. With this change, the new
debug.witness.output_channel sysctl allows one to specify that witness
output is to be printed to the kernel log (using log(9)) rather than the
console.
Reviewed by: cem, jhb
MFC after: 2 weeks
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4183
stack, take into account the copy of rsi pushed between the breakpoint
trapframe and the dtrace_invop frame. Prior to r287644, this was covered
by the fact that sizeof(struct amd64_frame) was 24 rather than 16.
Reported by: smh
Keep old CPUTYPEs around for compatibility. Also include
a list of typical values for FreeBSD.
# Split out from other changes in D4155
Differential Revision: https://reviews.freebsd.org/D4155
has not ran yet.
This fixes building objects directly, or skipping 'make depend', not generating
required headers first. This case did work without FAST_DEPEND so there's no
reason it should not work here as well.
An example of this can be seen building in gnu/usr.bin/binutils/libbfd
without running 'make depend' first to generate config.h.
Sponsored by: EMC / Isilon Storage Division
MFC after: 3 weeks
X-MFC-With: r290433
Analogously to r291040, in6_mc_get recurses on if_addr_lock if the
M_NOWAIT allocation fails. The fix is the same.
Suggested by: Andrey V. Elsukov
Reviewed by: jhb (ip4 version)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4138 (ip4 version)
When the M_NOWAIT allocation fails, we recurse the if_addr_lock trying
to clean up. Reorder the cleanup after dropping the if_addr_lock. The
obvious race is already possible between if_addmulti and IF_ADDR_WLOCK
above, so it must be ok.
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: jhb
Found with: M_NOWAIT failure injection testing
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4138
trying to do a mount. Given the backtrace,
it appears that the crash occurred when smb_vc_create() failed and then
called smb_vc_put() with vcp->vc_iod == NULL. smb_vc_put() subsequently
called smb_vc_disconnect() with vcp->vc_iod == NULL, causing the crash.
This patch adds a check for vcp->vc_iod != NULL in smb_vc_disconnect() to
avoid the crash. It also fixes the case in smb_vc_create() where
kproc_create() fails so that it destroys the mutexes and sets
vcp->vc_iod == NULL before free()'ing the iod structure.
The person who reported the PR tested the patch, but was not able
to reproduce the crash with or without the patch.
PR: 201912
Reviewed by: jhb
MFC after: 2 weeks
Discard the unused rx_free_q. Instead, reuse inputed packets by putting
them back on the *pend* queue after reinitialization.
If tx or rx handlers are unavailable, free mbufs rather than leaking
them.
With this change, if_ntb can receive more than 100
(NTB_QP_DEF_NUM_ENTRIES) packets.
Sponsored by: EMC / Isilon Storage Division
32-bit BARs can only address memory mapped in the low 32 bits of
physical RAM. Expose this as a 'plimit' out parameter from
ntb_mw_get_range().
Fix if_ntb to allocate memory within this limit.
Sponsored by: EMC / Isilon Storage Division
Sometimes they'll read spurious values (observed: 0xc on Broadwell-DE),
failing link negotiation.
Discussed with: Dave Jiang, Allen Hubbe
Sponsored by: EMC / Isilon Storage Division
The tunable 'hw.ntb.enable_writecombine' may be set to zero to
administratively disable write combining the mapped NTB region.
Sponsored by: EMC / Isilon Storage Division
Use bus_space_write instead of (non-volatile) C pointer writes via an
iowrite32() shim in the same places as the Dual BSD/GPL Linux driver.
Update some types to fixed 32-bit sizes.
Sponsored by: EMC / Isilon Storage Division
The _SKIP_BUILD is used while computing DIRDEPS. If MACHINE=host is passed in
then this logic was replacing 'MACHINE' with a literal value of the host arch,
which then caused the dirdeps graph to be wrong since it no longer had the
literal 'host' for any of include's dependencies.
This is a NOP currently since include/ is not usually built with MACHINE=host.
Sponsored by: EMC / Isilon Storage Division
The bootstrap-tools are supposed to be host tools, which in most cases, use
host headers and libraries. As such, directly including the src tree's headers
for libmd here causes the need to link libmd in since it will be built with
the new symbols (which /usr/lib/libmd.so) won't have unless it is new enough.
During the target build in buildworld the target headers are staged into
WORLDTMP and used via --sysroot, allowing the target xinstall to be built with
the new/target libmd.
The .PATH here was also not doing anything since xinstall does not use libmd
source files.
Sponsored by: EMC / Isilon Storage Division
MFC after: 2 weeks
Current Xen resume code clears all pending bitmap IPIs on resume, which is
not correct. Instead re-inject bitmap IPI vectors on resume to all CPUs in
order to acknowledge any pending bitmap IPIs.
Sponsored by: Citrix Systems R&D
MFC after: 2 weeks
All event channels are torn down when performing a migration on Xen, make
sure all handlers are also removed and the event channel structure is
properly disposed so it can be reused.
Sponsored by: Citrix Systems R&D
MFC after: 2 weeks
This is needed so interrupt handlers can be removed while the PIC is
resuming, it was previously not possible due to intr_resume holding the
intr_table_lock and intr_remove_handler recursing on it.
Sponsored by: Citrix Systems R&D
Reviewed by: kib (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4114
branded as well as unbranded binaries. This will be required to add
support for the new ELFv2 ABI on powerpc64, which is distinguished from
ELFv1 by the contents of the ELF header's flags field.
Reviewed by: imp
MFC after: 2 weeks
Drivers can request DMA to buffers that are not in memory represented
in the vm page arrays. Because of this, store KVA of already mapped
buffer to synclist and use it in dma_dcache_sync().
Reviewed by: jah
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D4120
