Remove check for presence PACKET_TAG_IPSEC_IN_DONE mbuf tag from
ip_ipsec_fwd(). PACKET_TAG_IPSEC_IN_DONE tag means that packet is
already handled by IPSEC code. This means that before IPSEC processing
it was destined to our address and security policy was checked in
the ip_ipsec_input(). After IPSEC processing packet has new IP
addresses and destination address isn't our own. So, anyway we can't
check security policy from the mbuf tag, because it corresponds
to different addresses.
We should check security policy that corresponds to packet
attributes in both cases - when it has a mbuf tag and when it has not.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
security policy. The changed block of code in ip*_ipsec_input() is
called when packet has ESP/AH header. Presence of
PACKET_TAG_IPSEC_IN_DONE mbuf tag in the same time means that
packet was already handled by IPSEC and reinjected in the netisr,
and it has another ESP/AH headers (encrypted twice?).
Since it was already processed by IPSEC code, the AH/ESP headers
was already stripped (and probably outer IP header was stripped too)
and security policy from the tdb_ident was applied to those headers.
It is incorrect to apply this security policy to current headers.
Also make ip_ipsec_input() prototype similar to ip6_ipsec_input().
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
PACKET_TAG_IPSEC_OUT_CRYPTO_NEEDED mbuf tags. They aren't used in FreeBSD.
Instead check presence of PACKET_TAG_IPSEC_OUT_DONE mbuf tag. If it
is found, bypass security policy lookup as described in the comment.
PACKET_TAG_IPSEC_OUT_DONE tag added to mbuf when IPSEC code finishes
ESP/AH processing. Since it was already finished, this means the security
policy placed in the tdb_ident was already checked. And there is no reason
to check it again here.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
termcap entry reordering requires ex (which is available via usr.bin/vi), which
breaks on build hosts where installworld is run with MK_VI == no (or when
make delete-old is run on ^/projects/building-blocks as vi, et al, are
removed on the branch when the knob is tweaked to => "no")
Reordering termcap was believed to improve performance, but the file is now
accessed via /etc/termcap.db, so /etc/termcap (and /usr/share/misc/termcap by
proxy) access is less preferred.
Reordering the file broke the historical comment <-> entry mapping as well,
which could muddle the purpose of entries in the file, so it could be
potentially harmful to readers in its reordered state.
Discussion took place on hackers@ here:
https://lists.freebsd.org/pipermail/freebsd-hackers/2014-December/046657.html
Discussed with: -hackers, mp
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
drives or flash keys. It can be enabled by uncommenting a single entry
in default /etc/auto_master. It can also be easily modified to use
fuse-based filesystems instead of in-kernel ones.
There is still one deficiency - the mountpoints are permanent, they
don't disappear when user removes the media. Fixing it needs some
autofs changes.
Differential Revision: https://reviews.freebsd.org/D1210
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
filesystems. It differs from file(1) in that it gives machine-parseable
output, it outputs filesystem labels, doesn't get confused by other
formats metadata, and runs in Capsicum sandbox.
Differential Revision: https://reviews.freebsd.org/D1255
Relnotes: yes
Sponsored by: The FreeBSD Foundation
By default Xen binds all event channels to vCPU#0, and FreeBSD only shuffles
the interrupt sources once, at the end of the boot process. Since new event
channels might be created after this point (because new devices or backends
are added), try to automatically shuffle them at creation time.
This does not affect VIRQ or IPI event channels, that are already bound to a
specific vCPU as requested by the caller.
Sponsored by: Citrix Systems R&D
Mask the event channel source before trying to bind it to a CPU, this
prevents stray interrupts from firing while assigning them and hitting the
KASSERT in xen_intr_handle_upcall.
Sponsored by: Citrix Systems R&D
This allows the Grant-table code to attach directly to the xenpv bus,
allowing us to remove the grant-table initialization done in xenpv.
Sponsored by: Citrix Systems R&D
Mave the grant table code into the dev/xen folder in preparation for turning
it into a device using the newbus interface. This is just code motion, no
functional changes.
Sponsored by: Citrix Systems R&D
_p and _w are adjusted to account for the partial write (if any).
However, _p and _w should not be unconditionally adjusted and should only
be changed when we actually wrote some bytes, or the accumulated accounting
error will eventually result in a heap buffer overflow.
Reported by: adrian and alfred (Norse Corporation)
Security: FreeBSD-SA-14:27.stdio
Security: CVE-2014-8611
can't do a timeout bigger than 15 seconds. The code wasn't checking for
this and because bitmasking was involved the requested timeout was
basically adjusted modulo-16. That led to things like a 128 second
timeout actually being a 9 second timeout, which accidentally worked fine
until watchdogd was changed to only pet the dog once every 10 seconds.
When running as a Xen PVH Dom0 we need to add custom buses that override
some of the functionality present in the ACPI PCI Bus and the PCI Bus. We
currently override the ACPI PCI Bus, but not the PCI Bus, so add a new
override for the PCI Bus and share the generic functions between them.
Reported by: David P. Discher <dpd@dpdtech.com>
Sponsored by: Citrix Systems R&D
conf/files.amd64:
- Add the new files.
x86/xen/xen_pci_bus.c:
- Generic file that contains the PCI overrides so they can be used by the
several PCI specific buses.
xen/xen_pci.h:
- Prototypes for the generic overried functions.
dev/xen/pci/xen_pci.c:
- Xen specific override for the PCI bus.
dev/xen/pci/xen_acpi_pci.c:
- Xen specific override for the ACPI PCI bus.
o Move similar block/networking methods to common file
o Follow r275640 and correct MMIO registers width
o Pass value to MMIO platform_note method.
Sponsored by: DARPA, AFRL
Overrunning buffer pointed to by (caddr_t)&oip->i_db[0] of 48 bytes by
passing it to a function which accesses it at byte offset 59 using
argument 60UL.
The issue was inherited from an older FFS implementation and
fixed there with by merging UFS2 in r98542. We follow the
FFS fix.
Discussed with: bde
CID: 1007665
MFC after: 3 days
If the SCI is remapped to a non-ISA global interrupt notify the ACPI
subsystem about the override.
Reported by: David P. Discher <dpd@dpdtech.com>
Sponsored by: Citrix Systems R&D
There are two main parts to get it to work, 1) most of the register
accesses need to be word sized, other than the config register which
needs to be byte aligned, and 2) we don't need the platform driver
for this to work on the Foundation Model, allow it to be NULL.
Differential Revision: https://reviews.freebsd.org/D1240
Reviewed by: bryanv
Sponsored by: The FreeBSD Foundation
Since VFS does not/cannot stop writes, sync might run indefinitely, or
be a wrong thing to do at all. E. g. NFS ignores VFS_SYNC() for
forced unmounts, since non-responding server does not allow sync to
finish. On the other hand, filesystems can and do stop writes using
fs-specific facilities, and should already fully flush caches in
VFS_UNMOUNT() due to the race.
Adjust msdosfs tp sync in unmount for forced call, to accomodate the
new behaviour. Note that it is still racy, since writes are not
stopped.
Discussed with: avg, bjk, mckusick
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
This will fix installation with differing host targets in installworld, so
one can build i386/i386 on an amd64 host, then install to an i386/i386 target
Reported by: alfred
Phabric: D1280
MFC after: 1 week
to be called before suspension and after resume, correspondingly. The
syncer_suspend() ensures that all filesystems dirty data and metadata
are saved to the permanent storage, and stops kernel threads which
might modify filesystems. The syncer_resume() restores stopped
threads.
For now, only syncer is stopped. This is needed, because each sync
loop causes superblock updates for UFS.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the vnode owning the buffer is not locked. More, it cannot be locked
safely, since getnewbuf_reuse_bp() is called from newbuf(), and some
other vnode is already locked, for which reused buffer will be
reassigned.
As the consequence, reclamation of the owning vnode could go in
parallel, in particular, the call to vnode_destroy_vobject(), which
deallocates the vm object and zeroes the v_bufobj->bo_object. Note
that the pages wired by the buffer are left wired and can be safely
freed by the vfs_vmio_release() without the need for the vm object
lock. Also, seeing stale pointer to the v_object is safe due to vm
object type stability.
Check for bo_bufobj != NULL and cache the value in local variable to
avoid trying to lock NULL vm object.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is not correct at least for the stop requests. Check for stop
conditions and suspend threads if requested.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
preparation for the global stop commit.
Move the code to weed suspended or sleeping threads into the
appropriate state, into the helper weed_inhib(). Current code already
has deep nesting and hard to follow [1].
Add currently useless helper remain_for_mode(), which returns the
count of threads which are allowed to run, according to the
single-threading mode.
In thread_single_end(), do not save curthread into local variable, it
is unused after, except to find curproc.
Remove stray empty line.
Requested by: avg [1]
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
for the suspension.
Currently, the loop performs uninterruptible cv_wait(9) call, which
prevents suspension until child allows further execution of parent.
If child is stopped, suspension or single-threading is delayed
indefinitely.
Create a helper thread_suspend_check_needed() to identify the need for
a call to thread_suspend_check(). It is required since call to the
thread_suspend_check() cannot be safely done while owning the child
(p2) process lock. Only when suspension is needed, drop p2 lock and
call thread_suspend_check(). Perform wait for cv with timeout, in
case suspend is requested after wait started; I do not see a better
way to interrupt the wait.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
