> List of fixes:
* use correct format for GID printouts
* double array indexing
* spelling in printouts
* void pointer arithmetic
* allow more receive rings
* correct maximum number of transmit rings
* use "const" instead of "static" for constants
* check for invalid VLAN tags
* check for lack of IRQ resources
> Added more hardware specific defines
> Added more verbose printouts of firmware status codes
Sponsored by: Mellanox Technologies
MFC after: 3 days
by placing appropriate #ifdefs around otherwise unused variables
or sections with functions called which are not available without
IPv6 support in the kernel.
Introduce fget_fcntl which performs appropriate checks when needed.
This removes a branch from fget_unlocked.
Introduce fget_mmap dealing with cap_rights_to_vmprot conversion.
This removes a branch from _fget.
Modify fget_unlocked to pass sequence counter to interested callers so
that they can perform their own checks and make sure the result was
otained from stable & current state.
Reviewed by: silence on -hackers
this option from all modules that enable it theirselves.
In C mode -fms-extensions option enables anonymous structs and unions,
allowing us to use this C11 feature in kernel. Of course, clang supports
it without any extra options.
Reviewed by: dim
Highlights:
- Multiple verbs API updates
- Support for RoCE, RDMA over ethernet
All hardware drivers depending on the common infiniband stack has been
updated aswell.
Discussed with: np @
Sponsored by: Mellanox Technologies
MFC after: 1 month
FreeBSD developers need more time to review patches in the surrounding
areas like the TCP stack which are using MPSAFE callouts to restore
distribution of callouts on multiple CPUs.
Bump the __FreeBSD_version instead of reverting it.
Suggested by: kmacy, adrian, glebius and kib
Differential Revision: https://reviews.freebsd.org/D1438
"MODULE_VERSION" macro definition. Remove the redefinition of the
"MODULE_VERSION" macro from the Linux kernel compatibility API.
MFC after: 1 month
Reported by: np@
Sponsored by: Mellanox Technologies
by dumbbell@ to be able to compile this layer as a dependency module.
Clean up some Makefiles and remove the no longer used OFED define.
Currently only i386 and amd64 targets are supported.
MFC after: 1 month
Sponsored by: Mellanox Technologies
- Close a migration race where callout_reset() failed to set the
CALLOUT_ACTIVE flag.
- Callout callback functions are now allowed to be protected by
spinlocks.
- Switching the callout CPU number cannot always be done on a
per-callout basis. See the updated timeout(9) manual page for more
information.
- The timeout(9) manual page has been updated to reflect how all the
functions inside the callout API are working. The manual page has
been made function oriented to make it easier to deduce how each of
the functions making up the callout API are working without having
to first read the whole manual page. Group all functions into a
handful of sections which should give a quick top-level overview
when the different functions should be used.
- The CALLOUT_SHAREDLOCK flag and its functionality has been removed
to reduce the complexity in the callout code and to avoid problems
about atomically stopping callouts via callout_stop(). If someone
needs it, it can be re-added. From my quick grep there are no
CALLOUT_SHAREDLOCK clients in the kernel.
- A new callout API function named "callout_drain_async()" has been
added. See the updated timeout(9) manual page for a complete
description.
- Update the callout clients in the "kern/" folder to use the callout
API properly, like cv_timedwait(). Previously there was some custom
sleepqueue code in the callout subsystem, which has been removed,
because we now allow callouts to be protected by spinlocks. This
allows us to tear down the callout like done with regular mutexes,
and a "td_slpmutex" has been added to "struct thread" to atomically
teardown the "td_slpcallout". Further the "TDF_TIMOFAIL" and
"SWT_SLEEPQTIMO" states can now be completely removed. Currently
they are marked as available and will be cleaned up in a follow up
commit.
- Bump the __FreeBSD_version to indicate kernel modules need
recompilation.
- There has been several reports that this patch "seems to squash a
serious bug leading to a callout timeout and panic".
Kernel build testing: all architectures were built
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D1438
Sponsored by: Mellanox Technologies
Reviewed by: jhb, adrian, sbruno and emaste
- Remove unsupported "bus" field from "struct pci_dev".
- Fix logic inside "pci_enable_msix()" when the number of allocated
interrupts are less than the number of available interrupts.
- Update header files included from "list.h".
- Ensure that "idr_destroy()" removes all entries before destroying
the IDR root node(s).
- Set the "device->release" function so that we don't leak memory at
device destruction.
- Use FreeBSD's "log()" function for certain debug printouts.
- Put parenthesis around arguments inside the min, max, min_t and max_t macros.
- Make sure we don't leak file descriptors by dropping the extra file
reference counts done by the FreeBSD kernel when calling falloc()
and fget_unlocked().
MFC after: 1 week
Sponsored by: Mellanox Technologies
Without this fix, a kernel with VIMAGE + Infiniband will panic on bootup.
Certain necessary #include statements require LIST_HEAD.
Add these includes to ofed/include/linux/list.h, because
LIST_HEAD is specifically overridden in this file.
PR: 191468
Differential Revision: D1279
Reviewed by: hselasky
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
sending not ready data:
o Add new flag to pru_send() flags - PRUS_NOTREADY.
o Add new protocol method pru_ready().
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
sb_cc member of struct sockbuf to a couple of inline functions:
sbavail() and sbused()
Right now they are equal, but once notion of "not ready socket buffer data",
will be checked in, they are going to be different.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Mellanox hardware driver(s):
- Properly name an inclusion guard
- Fix compile warnings regarding unsigned enums
- Add two new sysctl nodes
- Remove all empty linux header files
- Make an error printout more verbose
- Use "mod_delayed_work()" instead of
cancelling and starting a timeout.
- Implement more Linux scatterlist
functions.
MFC after: 3 days
Sponsored by: Mellanox Technologies
struct kinfo_file.
- Move the various fill_*_info() methods out of kern_descrip.c and into the
various file type implementations.
- Rework the support for kinfo_ofile to generate a suitable kinfo_file object
for each file and then convert that to a kinfo_ofile structure rather than
keeping a second, different set of code that directly manipulates
type-specific file information.
- Remove the shm_path() and ksem_info() layering violations.
Differential Revision: https://reviews.freebsd.org/D775
Reviewed by: kib, glebius (earlier version)
The current TSO limitation feature only takes the total number of
bytes in an mbuf chain into account and does not limit by the number
of mbufs in a chain. Some kinds of hardware is limited by two
factors. One is the fragment length and the second is the fragment
count. Both of these limits need to be taken into account when doing
TSO. Else some kinds of hardware might have to drop completely valid
mbuf chains because they cannot loaded into the given hardware's DMA
engine. The new way of doing TSO limitation has been made backwards
compatible as input from other FreeBSD developers and will use
defaults for values not set.
Reviewed by: adrian, rmacklem
Sponsored by: Mellanox Technologies
MFC after: 1 week
The current TSO limitation feature only takes the total number of
bytes in an mbuf chain into account and does not limit by the number
of mbufs in a chain. Some kinds of hardware is limited by two
factors. One is the fragment length and the second is the fragment
count. Both of these limits need to be taken into account when doing
TSO. Else some kinds of hardware might have to drop completely valid
mbuf chains because they cannot loaded into the given hardware's DMA
engine. The new way of doing TSO limitation has been made backwards
compatible as input from other FreeBSD developers and will use
defaults for values not set.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Add invfo_rdwr() (for read and write), invfo_ioctl(), invfo_poll(),
and invfo_kqfilter() for use by file types that do not support the
respective operations. Home-grown versions of invfo_poll() were
universally broken (they returned an errno value, invfo_poll()
uses poll_no_poll() to return an appropriate event mask). Home-grown
ioctl routines also tended to return an incorrect errno (invfo_ioctl
returns ENOTTY).
- Use the invfo_*() functions instead of local versions for
unsupported file operations.
- Reorder fileops members to match the order in the structure definition
to make it easier to spot missing members.
- Add several missing methods to linuxfileops used by the OFED shim
layer: fo_write(), fo_truncate(), fo_kqfilter(), and fo_stat(). Most
of these used invfo_*(), but a dummy fo_stat() implementation was
added.
argument but not actually defined anywhere.
This fixes the compile complaining about
"declaration of 'struct kiocb' will not be visible outside of this function".
MFC after: 2 weeks
X-MFC with: whatever changed caused the breakage ;-)
hardware driver update from Mellanox Technologies.
- Remove empty files from the OFED Linux Emulation layer.
- Fix compile warnings related to printf() and the "%lld" and "%llx"
format specifiers.
- Add some missing 2-clause BSD copyrights.
- Add "Mellanox Technologies, Ltd." to list of copyright holders.
- Add some new compatibility files.
- Fix order of uninit in the mlx4ib module to avoid crash at unload
using the new module_exit_order() function.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make the functions pci_disable_msi, pci_enable_msi and pci_enable_msix
methods of the newbus PCI bus. This code should not include any
functional change.
Sponsored by: Citrix Systems R&D
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D354
dev/pci/pci.c:
- Convert the mentioned functions to newbus methods.
- Fix the callers of the converted functions.
sys/dev/pci/pci_private.h:
dev/pci/pci_if.m:
- Declare the new methods.
dev/pci/pcivar.h:
- Add helpers to call the newbus methods.
ofed/include/linux/pci.h:
- Add define to prevent the ofed version of pci_enable_msix from
clashing with the FreeBSD native version.
trees. This happens because the logic inserting items into the radix
tree is allocating empty radix levels, when index zero does not
contain any items.
- Add proper error case handling, so that the radix tree does not end
up in a bad state, if memory cannot be allocated during insertion of
an item.
- Add check for inserting NULL items into the radix tree.
- Add check for radix tree getting too big.
MFC after: 1 week
Sponsored by: Mellanox Technologies
prior to starting "/sbin/init" which will run all the "/etc/rc.d/xxx"
scripts. Else there can be a race configuring the interfaces via
"/etc/rc.conf".
MFC after: 4 weeks
Sponsored by: Mellanox Technologies
