Add a new -B flag for use with list mode (-l) that lists details about
bridges. Currently this includes information about what resources a
bridge decodes on the upstream side for use by downstream devices including
bus numbers, I/O port resources, and memory resources. Windows and bus
ranges are enumerated for both PCI-PCI bridges and PCI-CardBus bridges.
To simplify the implementation, all enumeration is done by reading the
appropriate config space registers directly rather than querying the
bridge driver in the kernel via new ioctls. This does result in a few
limitations.
First, an unimplemented window in a PCI-PCI bridge cannot be accurately
detected as accurate detection requires writing to the window base
register. That is not safe for pciconf(8). Instead, this assumes that
any window where both the base and limit read as all zeroes is
unimplemented.
Second, the PCI-PCI bridge driver in a tree has a few quirks for
PCI-PCI bridges that use subtractive decoding but do not indicate that
via the progif config register. The list of quirks is duplicated in
pciconf's source.
Prefer pciids database from ports if present
Given the pciids database on ports is updated more often than the one in base
prefer this version if present, otherwise read the one from base.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3391
MFC support for PCI Alternate RID Interpretation. ARI is an optional PCIe
feature that allows PCI devices to present up to 256 functions on a bus.
This is effectively a prerequisite for PCI SR-IOV support.
r264007:
Add a method to get the PCI RID for a device.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264008:
Re-implement the DMAR I/O MMU code in terms of PCI RIDs
Under the hood the VT-d spec is really implemented in terms of
PCI RIDs instead of bus/slot/function, even though the spec makes
pains to convert back to bus/slot/function in examples. However
working with bus/slot/function is not correct when PCI ARI is
in use, so convert to using RIDs in most cases. bus/slot/function
will only be used when reporting errors to a user.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264009:
Re-write bhyve's I/O MMU handling in terms of PCI RID.
Reviewed by: neel
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264011:
Add support for PCIe ARI
PCIe Alternate RID Interpretation (ARI) is an optional feature that
allows devices to have up to 256 different functions. It is
implemented by always setting the PCI slot number to 0 and
re-purposing the 5 bits used to encode the slot number to instead
contain the function number. Combined with the original 3 bits
allocated for the function number, this allows for 256 functions.
This is enabled by default, but it's expected to be a no-op on currently
supported hardware. It's a prerequisite for supporting PCI SR-IOV, and
I want the ARI support to go in early to help shake out any bugs in it.
ARI can be disabled by setting the tunable hw.pci.enable_ari=0.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264012:
Print status of ARI capability in pciconf -c
Teach pciconf how to print out the status (enabled/disabled) of the ARI
capability on PCI Root Complexes and Downstream Ports.
MFC after: 2 months
Sponsored by: Sandvine Inc.
r264013:
Add missing copyright date.
MFC after: 2 months
Add support for displaying VPD for PCI devices via pciconf.
- Store the length of each read-only VPD value since not all values are
guaranteed to be ASCII values (though most are).
- Add a new pciio ioctl to fetch VPD for a single PCI device. The values
are returned as a list of variable length records, one for the device
name and each keyword.
- Add a new -V flag to pciconf's list mode which displays VPD data for
each device.
- Allow PCI devices that are attached to a driver to be identified by their
device name instead of just the selector.
- Accept an optional device argument to -l to restrict the output to only
listing details about a single device. This is mostly useful in
conjunction with other flags like -e or -c to allow a user to query
details about a single device.
#defines. This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.
This is a mostly mechanical rename:
s/PCIR_EXPRESS_/PCIER_/g
s/PCIM_EXP_/PCIEM_/g
s/PCIM_LINK_/PCIEM_LINK_/g
When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.
Discussed with: jhb
MFC after: 1 week
- Make parsing of PCI-e extended capabilities assume that future version
numbers are backwards compatible.
- Add new AER error descriptions.
- Add descriptions for more PCI-e extended capabilities.
MFC after: 1 week
Currently this dumps the status of any error bits in the PCI status register
and PCI-express device status register. It also lists any errors indicated
by version 1 of PCI-express Advanced Error Reporting (AER).
MFC after: 1 week
PCI-express capabilities. Non-PCI-express PCI devices may simply ignore
the upper bits in a config register address effectively aliasing the
device ID register to 0x100 rather than returning 0xFFFFFFFF. Previously
the code relied on these reads returning 0xFFFFFFFF.
MFC after: 3 days
PCI-express. I used PCIZ_* for ID constants (plain capability IDs use
PCIY_*).
- Add register definitions for the Advanced Error Reporting, Virtual
Channels, and Device Serial Number extended capabilities.
- Teach pciconf -c to list extended as well as plain capabilities. Adds
more detailed parsing for AER, VC, and device serial numbers.
MFC after: 2 weeks
registers.
- Cleanup PCI-X capability printf to not leave a dangling "supports" for
some PCI-X bridges.
- Display additional PCI express details including the negotiated and max
link width and the actual and maximum supported max payload.
MFC after: 1 month
device. The details include the current value of the BAR (including all
the flag bits and the current base address), its length, and whether or not
it is enabled. Since this operation is not invasive, non-root users are
allowed to use it (unlike manual config register access which requires
root). The intention is that userland apps (such as Xorg) will use this
interface rather than dangerously frobbing the BARs from userland to
obtain this information.
- Add a new sub-mode to the 'list' mode of pciconf. The -b flag when used
with -l will now list all the active BARs for each device.
MFC after: 1 month
with identical meaning as the colon ":". This is to support a syntax
that is more similar to a PCI device specification in the device hints
file. The selector is not fully compatible with the specification in
the hints file, since entries in that file use a different prefix,
which needs to be added to the getsel() routine, if full support of
that syntax is found to be desirable.
Approved by: re (Ken Smith)
PCI selectors with 2 or 3 elements behave exactly as before (i.e. the
domain is 0 and in the 2 element case, the function is also 0).
The form with 4 selector elements works as in the previous revision
and provides the PCI domain number as the left-most selector element.
This change allows old scripts (which used the 2 or 3 selector element
formats) to be kept. Without this patch, the 3 element form was parsed
as starting with a domain number (and the function was assumed to be 0),
with this patch, the domain is assumed to be 0 (and the last value is
used as the function number).
The man page is updated to describe the new selector semantics.
Approved by: re (Ken Smith)
support machines having multiple independently numbered PCI domains
and don't support reenumeration without ambiguity amongst the
devices as seen by the OS and represented by PCI location strings.
This includes introducing a function pci_find_dbsf(9) which works
like pci_find_bsf(9) but additionally takes a domain number argument
and limiting pci_find_bsf(9) to only search devices in domain 0 (the
only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are
changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order
to no longer report false positives when searching for siblings and
dupe devices in the same domain respectively.
Along with this change the sole host-PCI bridge driver converted to
actually make use of PCI domain support is uninorth(4), the others
continue to use domain 0 only for now and need to be converted as
appropriate later on.
Note that this means that the format of the location strings as used
by pciconf(8) has been changed and that consumers of <sys/pciio.h>
potentially need to be recompiled.
Suggested by: jhb
Reviewed by: grehan, jhb, marcel
Approved by: re (kensmith), jhb (PCI maintainer hat)
that the MSI mapping window is fixed at 0xfee00000 and the capability
does not include two more dwords used to program the address. Supporting
this mostly results in quieting spurious warnings during boot about
non-default MSI mapping windows.
- HT 2.00b also added a new HT capability type, so support that in pciconf.
MFC after: 3 days
Tested by: jmg
via a new -c flag to be used with -l. Some simple parsing code is
present for the following capabilities: Power Management, AGP, VPD,
MSI, PCI-X, HyperTransport, Vendor-specific, EHCI Debug Port, PCI-PCI
bridge subvendor ID, PCI-express, and MSI-X.
- Fix a few warnings in pciconf.c.
- Update some cruft in pciconf(8):
- PCI 2.1 is no longer a revolutionary standard, and subvendor ID's are
fairly common at this point, so reflect that.
- Header type 2 is used for PCI-CardBus bridges.
- Describe the -v option for -l after completing the basic -l description
instead of disrupting the flow in the middle.
Reviewed by: imp (partially)
MFC after: 1 week
