Commit Graph

8821 Commits

Author SHA1 Message Date
Poul-Henning Kamp
9010366de8 Fix to match new MD5 api, faster. 1995-07-12 09:15:15 +00:00
Poul-Henning Kamp
116805fd7a Fix to match new API. Fixes memory leak, faster. 1995-07-12 09:14:46 +00:00
Poul-Henning Kamp
05f65b296e Change this to do what it should have done from the start.
Add argument for buffer for output.
Fix manuals.
1995-07-12 09:13:49 +00:00
Bruce Evans
270d5e9f91 Optimize the zeroing of quotes. b_to_q() was always taking about 20% of
its time zeroing quotes although quotes are not very common.  E.g., there
are never any quotes in output queues.
1995-07-11 19:39:54 +00:00
Bruce Evans
5182dcbec2 Rearrange the inner loop of scanc() to get better code on i*86's
(on an i486, 10 cycles (+ cache misses) instead of 15).  The
change should be a no-op if the compiler is any good.  The best
possible i*86 code for the same algorithm is only 1 more cycle
faster on i486's so I don't want to bother implementing an
assembler version.

scanc() is a bottleneck for OPOST processing.  It is naturally
about 4 times as slow as bcopy() on 32-bit systems.
1995-07-11 18:50:47 +00:00
Bruce Evans
d800e06858 Fix races in scstart(). q_to_b() wasn't called at spltty(), so there
were two races:
- q_to_b() might unexpectedly return 0 (e.g, after a keyboard signal
  flushes the output queue and isn't echoed).  ansi_put() interprets
  0 bytes as 4GB...
- more output (e.g. for echoes) might arrive afer q_to_b() returns 0.
  Then scstart() returns presumably and the new output might not be
  handled for a long time.

Remove unused function scxint().

Fix prototypes (foo() isn't a prototype).
1995-07-11 18:34:30 +00:00
Bruce Evans
f2fb20ef41 Speed up the inner loop of ansi_put() by a few percent.
syscons' output is now only about 4-5 times slower than I want.
It loses a factor of 2 for scrolling output by unnecessarily copying
the screen buffer, a factor of 4/3 for dumb OPOST processing, and
a factor of 3/2 for clist processing.
1995-07-11 17:59:22 +00:00
Bruce Evans
7fbcd76bb5 Enable pcvt in LINT and don't generate a compile time error if syscons
and pcvt are both configured when LINT is defined.  There will be a
link time error instead.  This is to test building of pcvt more often.
1995-07-11 17:20:20 +00:00
Bruce Evans
50e2fb8055 Remove a bogus fclose. Normally the "w" stream for /var/crash/bounds was
fclosed twice and this didn't seem to cause any problems, but when
/var/crash was on an an unwritable nfs-mounted partition, fclose(NULL)
caused a core dump.
1995-07-11 17:03:44 +00:00
Peter Dufault
ca4b4242c9 The mode page editor never cleaned up the temp files. Thanks
to Joerg for noticing.  This low risk bug fix is appropriate for
2.1.
1995-07-11 09:21:33 +00:00
Jordan K. Hubbard
7c3041774a Documentation changes reflect the new hardware support and change the
appearance version to 2.0.5 (was 2.1).    Nice and tidy.   :-)
Submitted by:	Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-07-11 03:04:20 +00:00
Jordan K. Hubbard
15c761840a Release summary: (detailed descriptions in Edit History in matcd.c)
Adds support for non-Sound Blaster host adapters, including those
distributed by Reveal, Lasermate, IBM, Media Vision, Crystal and others.
The driver automatically senses the correct adapter type and you can
have both in the system at the same time.
(This change should eliminate a few complaints.)

Corrected bit-masking problem that prevented use on SB Vibra-16 boards.

Declared some internal data and functions static that should have been
that way all along.

Documentation changes reflect the new hardware support and change the
appearance version to 2.0.5 (was 2.1).    Nice and tidy.   :-)


Beta testers have verified functionality on SB16, Vibra-16, Media Vision
and Reveal adapters.   -Wall still shows no warnings.

                                        Frank Durda IV
                                        uhclem%nemesis@fw.ast.com
Submitted by:	Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-07-11 03:03:47 +00:00
Satoshi Asami
1feb36cd2d Add IS_DEPENDED_TARGET to change the behavior of a port when you want
to do something else than "install".  For example,

make IS_DEPENDED_TARGET=fetch fetch

will fetch the required distfiles including those of the dependencies
without actually building and installing dependencies.

Also document ECHO_MSG.

Requested by:	paul
Reviewed by:	paul, jhs and others
1995-07-11 02:15:35 +00:00
Mark Murray
bc6a510069 Correct typo. kadmin -> kadmind
Submitted by:	rich@lamprey.utmb.edu
1995-07-10 20:14:08 +00:00
Garrett Wollman
5b7ee6ed04 ICMP messages received from broken hosts which reply to multicast packets
were mistakenly delivered, rather than getting thrown out, which caused
substantial lossage.

Submitted by: Bill Fenner <fenner@parc.xerox.com>
1995-07-10 16:16:00 +00:00
Garrett Wollman
b399224dfb Patches to correct endianness bugs in mtrace and a few other little
problems.

Submitted by: bill Fenner <fenner@parc.xerox.com>
1995-07-10 16:13:05 +00:00
Garrett Wollman
dd22498271 tcp_input.c - keep track of how many times a route contained a cached rtt
or ssthresh that we were able to use

tcp_var.h - declare tcpstat entries for above; declare tcp_{send,recv}space

in_rmx.c - fill in the MTU and pipe sizes with the defaults TCP would have
	used anyway in the absence of values here
1995-07-10 15:39:16 +00:00
Garrett Wollman
8e718bb4af When adding a route, set rt_ifa and rt_ifp a little earlier so that
the protocol-specific add routine can examine it if desired.
1995-07-10 15:22:37 +00:00
David Greenman
6306c897b5 swapout_threads() -> swapout_procs(). 1995-07-10 08:53:22 +00:00
David Greenman
f2daac0c69 Increased global RSS limit to total RAM. 1995-07-10 08:48:58 +00:00
David Greenman
6b43f2f020 Killed bogus sparc #ifdef. 1995-07-10 08:39:49 +00:00
John Fieber
5295947e32 Added the contents of CONTRIB.FreeBSD as an appendix. 1995-07-09 21:39:55 +00:00
John Fieber
32e2e7c0cb Change freebsd-users-groups to freebsd-user-groups 1995-07-09 16:36:00 +00:00
David Greenman
c6e8c3576e Fixed panic that occurs on certain firewall rejected packets that was
caused by dtom() being used on an mbuf cluster. The fix involves passing
around the mbuf pointer.

Submitted by:	Bill Fenner
1995-07-09 14:29:46 +00:00
Joerg Wunsch
2c413cbe50 Fix the prototypes for getservby{name,port}().
Closes PR #docs/568: minor manpage bug

Submitted by:	Michael Smith (email address no longer valid)
1995-07-09 08:17:01 +00:00
Joerg Wunsch
6aeb10f748 PR #kern/572:
>Synopsis:       Booting w/scsi tape in drive causes first use to fail

Booting with a tape in a SCSI tape drive will cause the first
use of the tape to fail with the following message:

st0: bad request, must be between 0 and 0.

Submitted by:	mpp@legarto.minn.net (Mike Pritchard)
1995-07-09 08:14:24 +00:00
Joerg Wunsch
6f64074e6b Move some struct definitions outside of struct's, so their scopes for
C++ will match the scopes for C.

Submitted by:	Warner Losh
1995-07-09 08:12:27 +00:00
David Greenman
06cb725951 Moved call to VOP_GETATTR() out of vnode_pager_alloc() and into the places
that call vnode_pager_alloc() so that a failure return can be dealt with.
This fixes a panic seen on NFS clients when a file being opened is deleted
on the server before the open completes.
1995-07-09 06:58:03 +00:00
Peter Wemm
6ece4a516d This implements enough of the BSDI extensions to the net-2 ogetkerninfo()
syscall to allow applications linked against their libc's uname() to
work.  Netscape 1.1N being a prime example, which prints:
"uname() failed. cant tell what system we're running on".
This change is a little ugly, but that's mainly because of the "interesting"
semantics of the BSDI extension.
Since ogetkerninfo() is only enabled by COMPAT_43, Netscape will only
be affected on kernels with that option (eg: "GENERIC")
Reviewed by:	davidg
1995-07-09 02:49:30 +00:00
Andreas Schulz
f043580d86 Added a CLEANFILES+= y.tab.h to clean out the temporary file from yacc. 1995-07-08 22:36:06 +00:00
Andreas Schulz
f690290609 Add kzip to the clean and cleandir target so that it also get cleaned up
properly.
1995-07-08 22:24:20 +00:00
Andreas Schulz
f8e365a0e0 Correct a typo in a comment. 1995-07-08 22:09:11 +00:00
Andreas Schulz
4942064e51 Fix two typos in a comment. 1995-07-08 21:42:59 +00:00
Andreas Schulz
b03c2f9c33 Makefile:
Fix the use of /usr/X386 to ${X11BASE}. Fix the pathname /usr/bin/chess
to /usr/games/chess.
XCircle.c:
Fix the comment after an ifdef to make it a real comment to silent gcc.
std.h:
Comment out a private definition of sys_errlist.
1995-07-08 21:40:01 +00:00
Jordan K. Hubbard
e1578a7d62 Adjust the core team roster to reflect current reality. It's the middle
of July now and none of the parties involved have protested since the matter
was raised in June.

Spell Jörg's name with a proper umlaut.
1995-07-08 20:52:52 +00:00
Atsushi Murai
60e218e470 1. Clean up log message.
2. Optimize ModemQlen.
3. Sending ProtoReject for Unknow protocol (i.e. IPX)
4. Avoid select looping by reading tun under the high system load.
5. Adding Local version String for maintenance.
6. Just more speak rather silent ignore if you type invalid key words.
1995-07-08 17:46:56 +00:00
John Fieber
6498e7d632 Document the new freebsd-users-groups mailing list.
Submitted by:	Jonathan M. Bresler  jmb@kryten.atinc.com
1995-07-08 17:26:11 +00:00
Joerg Wunsch
d38ca307b7 PR # bin/274
> The command:
>
> touch -t 199504011200 testfile
>
> gives the error message:
>
> touch: out of range or illegal time specification: [[CC]YY]MMDDhhmm[.SS]

Submitted by:	mpp@legarto.minn.net (Mike Pritchard)
1995-07-08 16:47:47 +00:00
Joerg Wunsch
c3081fb7f9 I added a few lines of code to the latest info browser in the
texinfo-3.6 distribution to enable the use of the cursor keys.
Since there is an open problem report (gnu/289) for this it might be
of interest for (some of) you.

I (Joerg) have also added a minor hack that makes info recognizing a
window size change while it has been suspended.

Submitted by:	thomas@ghpc8.ihf.rwth-aachen.de (Thomas Gellekum)
1995-07-08 16:46:13 +00:00
Joerg Wunsch
aed5ecb7bf Several constants have been missing in the SysV IPC header files that
are recommended by the literature.

Fixes PR# misc/575: constants in sys/sem.h...

Submitted by:	daveho@infocom.com (Dave Hovemeyer)
1995-07-08 16:36:30 +00:00
Joerg Wunsch
78988ab839 PR #kern/600: PPP does not pay attention to IPTOS_LOWDELAY
Kernel PPP doesn't pay attention to IPTOS_LOWDELAY, but uses
        a table of port numbers, which isn't a generic method.  The following
        patch fixes this (the table is still used, but in addition
        PPP queues the packet in fastq if IPTOS_LOWDELAY is set.

Obtained from:	Tatu Ylonen <ylo@cs.hut.fi>
Submitted by:	Heikki Suonsivu <hsu@clinet.fi>
1995-07-08 16:34:55 +00:00
Joerg Wunsch
c3b65e4d1f Correct my last fix regarding the "Don't login..." message; plain csh
is too stupid to report anything about ARGV[0], so we will always
complain there, even for the "su -" case.  The fix worked for tcsh
however.
1995-07-08 11:11:23 +00:00
Rodney W. Grimes
701a45221e The vnconfig man page needs updating (change vndXX to vnXX).
The -a option description is not very visible.

Submitted by:	Pierre Beyssac <pb@fasterix.freenix.fr>
Obtained from:	PR docs/447
1995-07-08 09:29:51 +00:00
Atsushi Murai
549d663d78 Some implementation of PPP are required that starting a negotiaion by
sending *special* value as my address, even though the standard of PPP
is defined full negotiation based.  (e.g. "0.0.0.0" or Not "0.0.0.0")
1995-07-08 08:28:10 +00:00
Atsushi Murai
215a46965b Clean up mesage log facility stuff accordng to Joradn's question.
Reviewed by:	amurai@spec.co.jp
1995-07-08 06:08:52 +00:00
Atsushi Murai
28303f2747 >Number: 591
>Category:       bin
>Synopsis:       SPAP request REJexted in stead of NAKed
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs (FreeBSD bugs mailing list)
>State:          open
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Jul  5 01:40:01 1995
>Originator:     Dick van den Burg
>Organization:
>Release:        FreeBSD 2.0.5-RELEASE i386
>Environment:
>Description:

When trying to connect with ppp to a Shiva Lanrover (version 3.2) the
authentication fails because the SPAP (Shiva Secure PAP) configuration
request the is sent by Shive is REJected by ppp in stead of NAKed.

Reviewed by:	amurai@spec.c.jp and friends
Submitted by:	burg@is.ge.com
1995-07-08 05:09:57 +00:00
David Greenman
e0dca2b939 Improve negative usecount diagnostic a little. 1995-07-08 04:10:32 +00:00
David Greenman
e8cf02294a Added missing splx() in DIAGNOSTIC code.
Suggested by enami@sys.ptg.sony.co.jp.
1995-07-08 04:03:12 +00:00
Andrey A. Chernov
e985fb8ec7 Move first PATH initialization after sensing for interactive,
first relative path warning was disabled in old case
1995-07-07 23:14:36 +00:00
Andrey A. Chernov
f70e927c09 Do the same check for interactive shell (PATH warning)
like in csh.c
1995-07-07 23:13:11 +00:00