and do some preparations for handling 12x22 fonts (currently lots of code
implies and/or hardcodes a font width of 8 pixels). This will be required
on sparc64 which uses a default font size of 12x22 in order to add font
loading and saving support as well as to use a syscons(4)-supplied mouse
pointer image.
This API breakage is committed now so it can be MFC'ed in time for 6.0
and later on upcoming framebuffer drivers destined for use on sparc64
and which are expected to rely on using font loading internally and on
a syscons(4)-supplied mouse pointer image can be easily MFC'ed to
RELENG_6 rather than requiring a backport.
Tested on: i386, sparc64, make universe
MFC after: 1 week
by explicitly setting sc->font_width, in the same
places where sc->font_size is set, instead of
relying on the default initialized value of 0 for sc->font_width.
PR: kern/84836
Reported by: Andrey V. Elsukov <bu7cher at yandex dot ru>
MFC after: 2 days
o Add two new ioctl's KBADDKBD and KBRELKBD. These are used to add and remove
keyboard to (and from) kbdmux(4) keyboard multiplexer;
o Introduce new kbd_find_keyboard2() function. It does exactly the same job
as kbd_find_keyboard() function except it allows to specify starting index.
This function can be used to iterate over keyboards array;
o Re-implement kbd_find_keyboard() as call to kbd_find_keyboard2() with starting
index of zero;
o Make sure syscons(4) passed KBADDKBD and KBRELKBD ioctl's onto currently
active keyboard.
These changes should not have any visible effect.
MFC after: 1 week
function pointer to the vga render dispatch table and initialized it with
vga_nop. The problem is that vga_nop() is a varargs function, and the
table declares a non-varargs function pointer. On amd64 (and I think ppc),
mixing varargs and non-varargs function pointers is fatal.
Change vga_nop() and gfb_nop() from varargs to non-varargs do-nothing
functions. This stops the stack corruption that only happened on amd64.
Approved by: re (scottl)
24, and 32 bit modes. To use that, syscons(4) must be built with
the compile time option 'options SC_PIXEL_MODE', and VESA support (a.k.a.
vesa.ko) must be either loaded, or be compiled into the kernel.
Do not return EINVAL when the mouse state is changed to what it already is,
which seems to cause problems when you have two mice attached, and
applications are not likely obtain useful information through the EINVAL
caused by showing the mouse pointer twice.
Teach vidcontrol(8) about mode names like MODE_<NUMBER>, where <NUMBER> is
the video mode number from the vidcontrol -i mode output. Also, revert the
video mode if something fails.
Obtained from: DragonFlyBSD
Discussed at: current@ with patch attached [1]
PR: kern/71142 [2]
Submitted by: Xuefeng DENG <dsnofe at msn com> [1],
Cyrille Lefevre <cyrille dot lefevre at laposte dot net> [2]
uses white) so base the color of the border on SC_NORM_ATTR rather
than hardcoding BG_BLACK.
- Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings
(see also sys/dev/syscons/syscons.h rev. 1.82).
syscons(4) and its pseudo-devices don't get confused (including by
other device drivers) with the system controller devices which are
also termed 'sc' in the OFW tree (and which we probably want to
interface with hwpmc(4) one day).
VTB_FRAMEBUFFER specific code. On sparc64 we don't use a buffer of
type VTB_FRAMEBUFFER (see syscons.c) and excluding the respective
code here allows to compile syscons(4) without isa(4).
Requested by: joerg, marcel, yongari
which doesn't assume a hardware cursor on __sparc64__ rather than on
DEV_CREATOR. If we want to include more than one framebuffer driver in
e.g. the GENERIC kernel all drivers have to work the same way. Now that
DEV_CREATOR is no longer used remove it from options.sparc64.
- Move MD files into <arch>/<arch>.
- Move bus dependent files into <arch>/<bus>.
Rename some files to more suitable names.
Repo-copied by: peter
Discussed with: imp
modes on a tty structure.
Both the ".init" and the current settings are initialized allowing
the function to be used both at attach and open time.
The function takes an argument to decide if echoing should be enabled.
Echoing should not be enabled for regular physical serial ports
unless they are consoles, in which case they should be configured
by ttyconsolemode() instead.
Use the new function throughout.
want a splash screen.
There seems to be some confusion in the syscons code as to the meaning of
the SC_KERNEL_CONSOLE flag. Its absence is sometimes interpreted to mean
"I am not the system console", and sometimes to mean "I am not the only
VGA console" (see the font loading code for an example of the latter).
Someone with better syscons fu than myself should take a closer look.
future:
rename ttyopen() -> tty_open() and ttyclose() -> tty_close().
We need the ttyopen() and ttyclose() for the new generic cdevsw
functions for tty devices in order to have consistent naming.
for unknown events.
A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
it's in the way even more. Basicly: remove all alpha specific console
support from gfb(4), sio(4) and syscons(4). Rewrite the alpha console
initialization to be identical to all other platforms. In a nutshell:
call cninit().
The platform specific code now only sets or clears RB_SERIAL and thus
automaticly causes the right console to be selected.
sio.c:
o Replace the remote GDB hacks and use the GDB debug port interface
instead.
o Make debugging code conditional upon KDB instead of DDB.
o Call kdb_alt_break() instead of db_alt_break().
o Call kdb_enter() instead of breakpoint().
o Remove the ugly compatibility of using the console as the debug
port.
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
on architectures that need to call cninit() before the machine is
ready to support mutexes (required by make_dev()).
- Remove make_dev() call from scinit() when flags indicate
unit is the system console, rely on sc_attach_unit() to
handle it.
- When trying to access current screen's status (scr_stat
structure) use the static one provided for the initial
system console if no dev_t is available.
- When calling make_dev() in sc_attach_unit() catch special
case of system's initial console and set up dev_t structure
to include pointer to console's scr_stat struct.
Reviewed by: marcel
Tested by: marcel, grehan (ppc), others on current@
Approved by: rwatson (mentor)
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
Add missing D_TTY flags to various drivers.
Complete asserts that dev_t's passed to ttyread(), ttywrite(),
ttypoll() and ttykqwrite() have (d_flags & D_TTY) and a struct tty
pointer.
Make ttyread(), ttywrite(), ttypoll() and ttykqwrite() the default
cdevsw methods for D_TTY drivers and remove the explicit initializations
in various drivers cdevsw structures.
Free approx 86 major numbers with a mostly automatically generated patch.
A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
