Commit Graph

147478 Commits

Author SHA1 Message Date
Rick Macklem
9183a2a33e Fix the handling of NFSv4 Illegal Operation number to conform
to RFC3530 (the operation number in the reply must be set to
the value for OP_ILLEGAL). Also cleaned up some indentation.

Approved by:	kib (mentor)
2009-05-26 01:16:09 +00:00
Rick Macklem
415670e4c2 Fix the experimental nfs server's interface to the new krpc so
that it handles the case of a non-exported NFSv4 root correctly.
Also, delete handling for the case where nd_repstat is already
set in nfs_proc(), since that no longer happens.

Approved by:	kib (mentor)
2009-05-26 01:09:33 +00:00
Doug Barton
7dcdb93f91 Per the man page:
The makekey utility has been deprecated and will be removed in a future
release of FreeBSD.

Actually removing it was approved back on 10/29/2007 by re (kensmith) but
I dropped the ball on actually removing it. It's doubtful that it's become
more relevant/useful in the intervening time.
2009-05-26 00:07:02 +00:00
Mark Murray
cc7d853dfc I have been here long
The duration I know not
I tell what I can
2009-05-25 23:06:46 +00:00
Mark Murray
84e17f8297 There is rubbish here
It is time to take it out
Now it is cleaner
2009-05-25 22:50:11 +00:00
Brian Somers
f1b746f92d Bump the document date to reflect the recent address range enhancements.
Suggested by:	throdes
2009-05-25 21:29:06 +00:00
Brian Somers
1496abde06 Bump the document date to reflect the 'p' command enhancements.
Suggested by:	trhodes
2009-05-25 21:27:31 +00:00
Ed Schouten
4b54fa116c Fix kdump build when building it by hand.
I don't entirely like this approach, but it will only be temporarily,
namely until we get rid of COMPAT_43TTY. I do want <sys/ioctl_compat.h>
to cause a compiler error when included, because it's just there for
binary compatibility.

Reported by:	Andrzej Tobola <ato iem pw edu pl>
2009-05-25 20:07:41 +00:00
Mark Murray
09c398cabf Euro is missing
With this I shall see it fixed
Thank you for your time
2009-05-25 17:06:24 +00:00
Sam Leffler
a6c3cf3eca Fix handling of devices w/o radiotap support:
o do not attach DLT_IEEE802_11_RADIO unless both tx and rx headers are
  present; this is assumed in the capture code paths
o verify the above with asserts in ieee80211_radiotap_{rx,tx}
o add missing checks for active taps before calling ieee80211_radiotap_rx
2009-05-25 16:38:47 +00:00
Sam Leffler
ac86de8587 do internal bpf tracking only for radiotap DLT's 2009-05-25 16:35:31 +00:00
Sam Leffler
5ce8d9708c rev bpf attach/detach event api to include the dlt 2009-05-25 16:34:35 +00:00
Rick Macklem
bcdaa85069 Add the "-4" option to nfsstat, so that it will reports stats
for the experimental nfs subsystem when that option is specified.

Approved by:	kib (mentor)
2009-05-25 15:48:10 +00:00
Robert Watson
cce6e15556 Remove comment about moving tcp_reass() to its own file named tcp_reass.c,
that happened a while ago.

MFC after:	3 days
2009-05-25 14:51:47 +00:00
Attilio Rao
9235ed7199 Use, in uncovered part, the END() macro in order to improve debugging.
In this specific case, Valgrind won't get confused when analyzing such
functions.

Sponsored by:	Sandvine Incorporated
Tested by:	emaste
MFC:		3 days
2009-05-25 14:37:10 +00:00
Robert Watson
5265bc6013 Staticize spx_remque() now that it's only used from spx_reass.c. 2009-05-25 13:52:51 +00:00
Robert Watson
37516046a2 Add missing call to ipx_pcbdetach() during SPX socket tear-down: not
harmful in practice if running without INVARIANTS, but will panic
with KASSERT enabled when SPX sockets are closed.

MFC after:	3 days
2009-05-25 13:34:03 +00:00
Robert Watson
e098e5f032 Eliminate use of dtom() in spx_output() by fixing up tracking of the
containing mbuf for 'si' in local variable 'm'.

MFC after:	1 month
2009-05-25 13:32:54 +00:00
Robert Watson
fc2c3e84bc Prefer NULL to 0 for pointer assignments.
MFC after:	1 month
2009-05-25 11:52:33 +00:00
Robert Watson
905220d58e Rather than store a skeleton IPX header in an mbuf hung off the SPX
PCB, simply embed it in the PCB, avoiding additional memory overhead,
memory allocation overhead, and removing one of the few remaining
uses of dtom() in the network stack.

Restore misplaced spx_ctlinput() from an earlier commit.

MFC after:	1 month
2009-05-25 11:50:58 +00:00
Robert Watson
040eca7b04 Pull SPX reassembly queue init and flush into spx_reass.c.
MFC after:	1 month
2009-05-25 10:25:41 +00:00
Robert Watson
d429940932 Prefer m_nextpkt to m_act when iterating mbuf queues.
MFC after:	1 month
2009-05-25 09:57:18 +00:00
Maxim Konovalov
da3ea50434 o Fix typo in the example.
PR:		docs/134930
Submitted by:	Alex Keda
MFC after:	1 week
2009-05-25 09:52:58 +00:00
Robert Watson
cf5320bd29 Complete move of SPX reassembly from spx_usrreq.c to spx_reass.c.
MFC after:	1 month
2009-05-25 09:28:54 +00:00
Brian Somers
d1c77156d8 Enhance the 'p' command so that it understands size qualifiers (K/M/G) and
so that it understands '*' as 'DTRT'.

PR:		68312
Submitted by:	Rene de Vries - rene at tunix dot nl (mostly)
MFC after:	3 weeks
2009-05-25 09:23:26 +00:00
Robert Watson
3f33fa335e Copy spx_usrreq.c to spx_reass.c in order to apply similar file layout
changes to IPX/SPX that were applied to TCP/IP in the creation of
tcp_reass.c.

MFC after:	1 month
2009-05-25 09:09:43 +00:00
Pyun YongHyeon
4f9b2cb233 Correct controller description for 88E8035, 88E8036, 88E8038 and
88E8039. These are fast ethernet controllers.
2009-05-25 08:27:52 +00:00
Pyun YongHyeon
f972d4c6fb Correct controller description for 88E8035, 88E8036, 88E8038 and
88E8039. These are fast ethernet controllers.
2009-05-25 08:26:39 +00:00
Pyun YongHyeon
004f62de56 msk(4) now supports Yukon FE+. Specifically 88E8040, 88E8040T,
88E8048 and 88E8070 are supported.
Bump .Dd
2009-05-25 08:11:03 +00:00
Pyun YongHyeon
b7e1e144e9 Simplify SIOCSIFFLAGS handler. 2009-05-25 08:02:05 +00:00
Pyun YongHyeon
98e02aebef Be consistent with other capability checking. 2009-05-25 07:59:30 +00:00
Pyun YongHyeon
89e2266651 Don't reinitialize controller when interface is already running. 2009-05-25 07:56:14 +00:00
Pyun YongHyeon
6f5a0d1f39 If interface is not UP, don't return media status. 2009-05-25 07:50:14 +00:00
Pyun YongHyeon
1290998502 Add device ids for Yukon FE+(88E8040, 88E8040T, 88E8048 and 88E8070). 2009-05-25 07:48:00 +00:00
Pyun YongHyeon
224003b7ba Add workaround for Yukon FE+ A0. This controller is known to have
severe silicon bugs that can't handle VLAN hardware tagging as well
as status LE writeback bug. The status LE writeback bug is so
critical we can't trust status word of received frame. To accept
frames on Yukon FE+ A0 msk(4) just do minimal check for received
frames and pass them to upper stack. This means msk(4) can pass
corrupted frames to upper layer. You have been warned!
Also I supposed RX_GMF_FL_THR to be 32bits register but Linux
driver treated it as 16bit register so follow their leads. At least
this does not seem to break msk(4) on Yukon FE+.

Tested by:	bz, Tanguy Bouzeloc ( the.zauron <> gmail dot com )
		Bruce Cran ( bruce <> cran dot org dot uk )
		Michael Reifenberger ( mike <> reifenberger dot com )
		Stephen Montgomery-Smith ( stephen <> missouri dot edu )
2009-05-25 07:31:18 +00:00
Pyun YongHyeon
61708f4cb2 Add preliminary Yukon FE+ support and register definitions.
Yukon FE+ is fast ethernet controller and uses new descriptor
format. Since I don't have this controller, the support code was
written from guess and various feedback from enthusiastic users.
Thanks to all users who patiently tested my initial patches.
Special thanks to Tanguy Bouzeloc who fixed critical bug of initial
patch.

Tested by:	bz, Tanguy Bouzeloc ( the.zauron <> gmail dot com )
		Bruce Cran ( bruce <> cran dot org dot uk )
		Michael Reifenberger ( mike <> reifenberger dot com )
		Stephen Montgomery-Smith ( stephen <> missouri dot edu )
2009-05-25 07:06:10 +00:00
Brian Somers
258f721bc9 Regression test the 'addr1,+N' feature added in r192732 2009-05-25 06:58:42 +00:00
Brian Somers
f879e8d923 Implement "addr1,+N" ranges - not dissimilar to grep's -A switch.
PR:		134856
Submitted by:	Jeremie Le Hen - jeremie at le-hen dot org
2009-05-25 06:45:33 +00:00
Pyun YongHyeon
e6e23ffecb Explicitly reset GMAC Controls and initialize GM_GP_CTRL register.
The GM_GP_CTRL register may have stale content from previous link
information so clearing it will make hardware update the register
correctly when it established a valid link.
While I'm here remove stale comment.
2009-05-25 06:39:48 +00:00
Pyun YongHyeon
846e6d79e5 Disable HW WOL for Yukon EC Ultra. While I'm here use switch
statement over if-else statement. This change will make it easy to
add newer Yukon controllers.
2009-05-25 06:29:02 +00:00
Pyun YongHyeon
6c4d62e1d6 Explicitly check resolved speed/duplex. Just checking IFM_ACTIVE
does not guarantee established link. Also 1000baseT link report for
fast ethernet controller is not valid one so make sure gigabit link
is allowed for this controller.
Whenever we lost link, check whether Rx/Tx MACs were enabled. If both
MAC are not active, do not try to disable it again.
2009-05-25 06:19:36 +00:00
Pyun YongHyeon
262e9dcf36 Add support for newer descriptor format. This format is used on
Yukon FE+, Yukon Extreme and Yukon Supreme.
2009-05-25 06:09:18 +00:00
Pyun YongHyeon
40d6bed8a7 Oops, add missing ~ operator. 2009-05-25 04:27:12 +00:00
Pyun YongHyeon
4b76fe63d9 Caller already hold a driver lock in mii callback, assert it. 2009-05-25 04:25:08 +00:00
Pyun YongHyeon
e2b166039a Rather than checking every chip revision, introduce more flags to
mark controller's capability. Controllers that have jumbo frame
support sets MSK_FLAG_JUMBO, and controllers that does not support
checksum offloading for jumbo frames will set MSK_FLAG_JUMBO_NOCSUM.
For Fast Ethernet controllers it will set MSK_FLAG_FASTETHER and it
would be used in link state handling.

While here, disable Tx checksum offloading if jumbo frame is used
on controllers that does not have Tx checksum offloading capability
for jumbo frame(e.g. Yukon EC Ultra).
2009-05-25 04:22:27 +00:00
Pyun YongHyeon
325c534e4a Correctly return the result of mii_mediachg(). Previously it always
used to return success.
2009-05-25 03:53:12 +00:00
Pyun YongHyeon
7a76e8a489 Use bit definition to represent MSI and detach state instead of
using separate variables in softc.
2009-05-25 03:49:43 +00:00
Pyun YongHyeon
ab7df1e420 Use bit definition to represent link state, device suspend instead
of using separate variables in softc.
2009-05-25 03:42:33 +00:00
Pyun YongHyeon
19585f4549 Remove link handling taskqueue and use mii callback directly. While
I'm here also checks driver running state.
2009-05-25 03:24:47 +00:00
Pyun YongHyeon
745ef56af2 Add driver support for 88E3016 PHY which is found on Marvell Yukon
FE+ controller. Due to the severe silicon bugs for Yukon FE+,
88E3016 seems to require more workarounds. However I'm not sure
whether the workaround is PHY specific or only applicable to Yukon
FE+. The datasheet for the PHY is publicly available but it lacks
several details for the workaround used in this change. The
workaround information was obtained from Linux. Many thanks to
Yukon FE+ users who helped me add 88E3016 support.

Tested by:	bz, Tanguy Bouzeloc ( the.zauron <> gmail dot com )
		Bruce Cran ( bruce <> cran dot org dot uk )
		Michael Reifenberger ( mike <> reifenberger dot com )
		Stephen Montgomery-Smith ( stephen <> missouri dot edu )
2009-05-25 02:36:29 +00:00