accounting for I/O counts at completion of I/O operation. Also switch
from using global devmtx to vnode mutex to reduce contention.
Suggested and reviewed by: kib
of the version map just exported all the symbols, which caused a
binutils bug being triggered when ld fails to link two objects, one
of which exports a versioned version of the symbol, and another --
unversioned. [1]
- Also add version map for libkafs5.
Submitted by: jchandra@ (based on)
damage which I committed when I had less clue about such things.
Don't ever put normal data frames on the mcast software queue.
Just put mcast frames there if needed.
Pass the txq decision into ath_tx_normal_setup(), as we've already made
the decision. Don't re-do it.
Whilst i'm here, add another random debugging statement.
used in the code which needs to implement some specific
behaviour when being run under QEMU.
- Make PXA UART probe code to work under QEMU gumstix, which
doesn't emulate all the ports properly.
allocator.
Replace UINT32_MAX checks with INT_MAX. Keeping more than 2^31 nodes in
memory is not likely to become possible in foreseeable feature and would
require new unit number allocator.
Discussed with: delphij
MFC after: 2 weeks
quotation. Also make sure we have the same amount of columns in each row as
the number of columns we specify in the head arguments.
Reviewed by: brueffer
This fixes bootp on if_smc, as bootp code perform SIOCSIFADDR
ioctl call immediately after sending the request (which causes
if_init being called) which causes the adapter to drop all the
packets received in the meantime.
call these after rate control selection is done.
The duration/protection code wasn't working - it expected the rix to
be valid. Unfortunately after I moved the rate control selection into
late in the process, the rix value isn't valid and thus the protection/
duration code would get things wrong.
HT frames are now correctly protected with an RTS and for the AR5416,
this involves having the aggregate frames be limited to 8K.
TODO:
* Fix up the DMA sync to occur just before the frame is queued to the
hardware. I'm adjusting the duration here but not doing the DMA
flush.
* Doubly/triply ensure that the aggregate frames are being limited to
the correct size, or the AR5416 will get unhappy when TXing RTS-protected
aggregates.
correct sign when the remainder was 0.
Fix a separate bug in remquo alone, in which the remainder and
quotient were both off by a bit in certain cases involving subnormal
remainders.
The bugs affected all platforms except amd64 and i386, on which the
routines are implemented in assembly.
PR: 166463
Submitted by: Ilya Burylov
MFC after: 2 weeks
if any subframes in an aggregate have different protection from the
first frame in the formed aggregate, don't add that frame to the
aggregate.
This is likely a suboptimal method (I think we'll mostly be OK marking
frames that have seqno's with the same protection as normal data frames)
but I'll just be cautious for now.
This will be used by some upcoming code to ensure that aggregates
are enforced to be a certain size. The AR5416 has a limitation on
RTS protected aggregates (8KiB).
that don't exist.
Anecdotal evidence indicates that it is better to return 011b (bad LUN)
than 001b (LUN offline). However, this change also gives the user a
sysctl/tunable, kern.cam.ctl.inquiry_pq_no_lun, to override the change
and return to the previous behavior. (The previous behavior was to
return 001b, or LUN offline.)
ctl.c: Change the default inquiry peripheral qualifier to 011b,
and add a sysctl and tunable to allow the user to change
it back to 001b if needed.
Don't insert a Copan copyright statement in the inquiry
data. The copyright statements on the files are
sufficient.
ctl_private.h: Add sysctl variable context to the CTL softc.
ctl_cmd_table.c,
ctl_frontend_internal.c,
ctl_frontend.c,
ctl_backend.c,
ctl_error.c: Include sys/sysctl.h.
MFC after: 3 days
222813, that left all un-pinned interrupts assigned to CPU 0.
sys/x86/x86/intr_machdep.c:
In intr_shuffle_irqs(), remove CPU_SETOF() call that initialized
the "intr_cpus" cpuset to only contain CPU0.
This initialization is too late and nullifies the results of calls
the intr_add_cpu() that occur much earlier in the boot process.
Since "intr_cpus" is statically initialized to the empty set, and
all processors, including the BSP, already add themselves to
"intr_cpus" no special initialization for the BSP is necessary.
MFC after: 3 days
(slightly) different semantics and renaming it prevents a (harmless)
WITNESS warning during bootup for 32-bit kernels on 64-bit CPUs.
MFC after: 5 days
Though we should open the TTY with O_NONBLOCK to prevent rc(8) execution
from potentially stalling, we must not forget to clear the flag later
on, to prevent read(2) calls from failing later on.
This prevented the shell pathname prompt from working properly.
Reported by: kib
The menu item is now made completely independent with the ACPI item - most
modern systems seem to require ACPI and become even more "unsafe"
without it.
Safe Mode no longer disables APIC for the same reason.
kbdmux is not disabled as this feature has proven itself stable.
New actions:
- SMP is disabled in the Safe Mode now
- eventtimers are forced to periodic mode (some real and virtual systems
seem to have problems otherwise)
- geom extra vigorous integrity checking is disabled, this is to
facilitate migration from previous versions
Possible short term to do:
- make SMP switch a separate menu item
- restore APIC switch as a separate menu item
Longer term to do:
- turn various tweaks into separate menu items in a Safe Mode sub-menu
Please consider adding a safety tweak to Safe Mode when introducing
new major features or changes that may cause instabilities.
Discussed with: jhb, scottl, Devin Teske
MFC after: 3 weeks (stable/9 only)
Linux and Solaris (at least OpenSolaris) has PF_PACKET socket families to send
raw ethernet frames. The only FreeBSD interface that can be used to send raw frames
is BPF. As a result, many programs like cdpd, lldpd, various dhcp stuff uses
BPF only to send data. This leads us to the situation when software like cdpd,
being run on high-traffic-volume interface significantly reduces overall performance
since we have to acquire additional locks for every packet.
Here we add sysctl that changes BPF behavior in the following way:
If program came and opens BPF socket without explicitly specifyin read filter we
assume it to be write-only and add it to special writer-only per-interface list.
This makes bpf_peers_present() return 0, so no additional overhead is introduced.
After filter is supplied, descriptor is added to original per-interface list permitting
packets to be captured.
Unfortunately, pcap_open_live() sets catch-all filter itself for the purpose of
setting snap length.
Fortunately, most programs explicitly sets (event catch-all) filter after that.
tcpdump(1) is a good example.
So a bit hackis approach is taken: we upgrade description only after second
BIOCSETF is received.
Sysctl is named net.bpf.optimize_writers and is turned off by default.
- While here, document all sysctl variables in bpf.4
Sponsored by Yandex LLC
Reviewed by: glebius (previous version)
Reviewed by: silence on -net@
Approved by: (mentor)
MFC after: 4 weeks
Interface locks and descriptor locks are converted from mutex(9) to rwlock(9).
This greately improves performance: in most common case we need to acquire 1
reader lock instead of 2 mutexes.
- Remove filter(descriptor) (reader) lock in bpf_mtap[2]
This was suggested by glebius@. We protect filter by requesting interface
writer lock on filter change.
- Cover struct bpf_if under BPF_INTERNAL define. This permits including bpf.h
without including rwlock stuff. However, this is is temporary solution,
struct bpf_if should be made opaque for any external caller.
Found by: Dmitrij Tejblum <tejblum@yandex-team.ru>
Sponsored by: Yandex LLC
Reviewed by: glebius (previous version)
Reviewed by: silence on -net@
Approved by: (mentor)
MFC after: 3 weeks
a pair of records similar to syscall entry and return that a user can
use to determine how long page faults take. The new ktrace records are
enabled via the 'p' trace type, and are enabled in the default set of
trace points.
Reviewed by: kib
MFC after: 2 weeks
