While here tag which architecture release fields were added and remove a
field that only existed in very early releases of the ARMv8 spec.
Sponsored by: DARPA, AFRL
end of the vnet_set. The generated code uses an absolute relocation at
one byte beyond the end of the carpstats array. This means the relocation
for the vnet does not happen for carpstats initialisation and as a result
the kernel panics on module load.
This problem has only been observed with carp and only on i386.
We considered various possible solutions including using linker scripts
to add padding to all kernel modules for pcpu and vnet sections.
While the symbols (by chance) stay in the order of appearance in the file
adding an unused non-file-local variable at the end of the file will extend
the size of set_vnet and hence make the absolute relocation for carpstats
work (think of this as a single-module set_vnet padding).
This is a (tmporary) hack. It is the least intrusive one as we need a
timely solution for the upcoming release. We will revisit the problem in
HEAD. For a lot more information and the possible alternate solutions
please see the PR and the references therein.
PR: 230857
MFC after: 3 days
The description of CMSG_FIRSTHDR used two variables (mhdr and msg) to
reference the same thing. Use msghdr consistency across the manual page
instead.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17804
A crash was reported where the crash occurred in nfs_advlock() when the
NFS_ISV4(vp) macro was being executed. This was caused by the vnode
being VI_DOOMED due to a forced dismount in progress.
This patch fixes the problem by locking the vnode before executing the
NFS_ISV4() macro.
Tested by: rlibby
PR: 232673
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17757
Most easily reproducible by attempting to activate the currently activated
BE, one would get a "not a cloned filesystem" error instead of success or a
sane message.
PR: 232488
MFC after: 3 days
- Document that mount_smbfs(8) only supports SMB1 and that SMB2 and SMB3
are not supported at the moment. Suggest users to browse ports for
software compatible with newer versions of the protocol.
- Copy supported servers list from README.
- Add a SEE ALSO section and reference the chapter about Samba in the
FreeBSD Handbook.
- Add a HISTORY section.
- Style changes:
- Use Dq instead of Em in the EXAMPLES section.
- Mark command modifiers with Cm.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Sponsored by: Bally Wulff Games & Entertainment GmbH
Differential Revision: https://reviews.freebsd.org/D17798
specification for the comparisons made.
Thanks to lstewart@ for the suggestion.
MFC after: 4 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D17595
program to use the libufs library interface. No functional change
(as for now the libufs library does not do inode check-hashes).
Reviewed by: kib
Sponsored by: Netflix
On some Intel devices BIOS does not properly reserve memory (called
"stolen memory") for the GPU. If the stolen memory is claimed by the
OS, functions that depend on stolen memory (like frame buffer
compression) can't be used.
A function called pci_early_quirks that is called before the virtual
memory system is started was added. In Linux, this PCI early quirks
function iterates through all PCI slots to check for any device that
require quirks. While this more generic solution is preferable I only
ported the Intel graphics specific parts because I think my
implementation would be too similar to Linux GPL'd solution after
looking at the Linux code too much.
The code regarding Intel graphics stolen memory was ported from
Linux. In the case of Intel graphics stolen memory this
pci_early_quirks will read the stolen memory base and size from north
bridge registers. The values are stored in global variables that is
later read by linuxkpi_gplv2. Linuxkpi stores these values in a
Linux-specific structure that is read by the drm driver.
Relevant linuxkpi code is here:
https://github.com/FreeBSDDesktop/kms-drm/blob/drm-v4.16/linuxkpi/gplv2/src/linux_compat.c#L37
For now, only amd64 arch is suppor ted since that is the only arch
supported by the new drm drivers. I was told that Intel GPUs are
always located on 0:2:0 so these values are hard coded for now.
Note that the structure and early execution of the detection code is
not required in its current form, but we expect that the code will be
added shortly which fixes the potential BIOS bugs by reserving the
stolen range in phys_avail[]. This must be done as early as possible
to avoid conflicts with the potential usage of the memory in kernel.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Reviewed by: bwidawsk, imp
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16719
Differential revision: https://reviews.freebsd.org/D17775
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.
MFC after: never
This adds new keywords to rc/service to enable/disable a service's
rc.conf(5) variable and "delete" to remove the variable.
When the "service_delete_empty" variable in rc.conf(5) is set to "YES"
(default is "NO") an rc.conf.d file (in /etc/ or /usr/local/etc) is
deleted if empty after modification using "service $foo delete".
Submitted by: lme (modified)
Reviewed by: 0mp (previous version), lme, bcr
Relnotes: yes
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D17113
Further to r339946 skip the .error case for lack of in-tree binutils
support when we haven't set the toolchain feature variables.
Discussed with: arichardson
Sponsored by: The FreeBSD Foundation
- Use Xr to reference other manual pages.
- Reference execve(2) instead of exec(2) as exec(2) does not exist.
- Remove the deprecated "Tn" macro.
- Improve the formatting of the etime description.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17780
check to only set it for emulators as the CPU list may be changed when
the emulator starts. Until this is working just always set it.
Sponsored by: DARPA, AFRL
while probing for drives, use int13 extended info before standard one and
provide workaround for case we are not getting needed information in case
of floppy drive.
In case of INT13 errors, there are (at least) 3 error codes appearing in case
of missin media - 20h, 31h and 80h. Flag the no media and do not print an
error.
Differential Revision: https://reviews.freebsd.org/D17667
This takes advantage of two recents changes to makesyscalls.sh:
r328598: Permit a range of syscall numbers for UNIMPL
r339624: Remove the need for backslashes in syscalls.master
Syscall declerations are now split across multiple lines with the
syscall name and variables each on seperate lines (with an exception for
syscalls taking no arguments.)
Reviewed by: imp
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17706
Enabling BSD_CRTBEGIN on amd64 resulted in
error: unused variable '__CTOR_LIST__'.
__CTOR_LIST__ is indeed unused in crtbegin.c; it marks the beginning of
the .ctors array and is used in crtend.c. Annotate __DTOR_LIST__ as
well for consistency.
Discussed with: andrew
MFC with: r339738
Sponsored by: The FreeBSD Foundation
Also, link to the homepage of the BSSSD project, which developed the
original driver.
Reviewed by: bcr, kevans
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17608
the early pmap_mapbios/unmapbios code. It is even worse when there are
multiple L2 entries to handle as we would need to iterate over all pages.
Sponsored by: DARPA, AFRL
This will no work when there is no cc in $PATH (which is the case before the
cross-tools stage once we no longer inherit $PATH in $WMAKE).
The variables set by bsd.compiler.mk/bsd.linker.mk are not needed in these
stages so this avoids a little bit of makefile parsing.
Reviewed By: emaste
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D16814
It appears to be responsible for random segfaults observed when lots
of paging activity is taking place, but the root cause is not yet
understood.
Requested by: alc
MFC after: now
I erroneously thought that it was two 64bit platforms which use link_elf_obj.c.
PR: 228854
Reported by: ci.f.o.
MFC after: 3 days
X-MFC with: r339931
Pointyhat to: bz
we fail during module load because the pcpu or vnet module sections are
full. We did return a proper error but not leaving any indication to
the user as to what the actual problem was.
Even worse, on 12/13 currently we are seeing an unrelated error (ENOSYS
instead of ENOSPC, which gets skipped over in kern_linker.c) to be
printed which made problem diagnostics even harder.
PR: 228854
MFC after: 3 days
