This code caused more problems than it should have fixed (boot failures) on
the machines I tested, so has been commented out for a while now. Remove
it, and assume the errata fixups were done by the bootloader where they
belong.
1) Don't give up if m_collapse() fails. Rather than giving up, try
m_defrag() immediately.
2) Fix a leak where, if the NIC driver rejected the defrag'ed chain
as having too many segments, we would fail to free the chain.
Reviewed by: Matthew Macy <mmacy@mattmacy.io> (this version of patch)
Submitted by: Matthew Macy <mmacy@mattmacy.io> (early version of leak fix)
This change allows clean device detach on attach failures and driver unload,
while previous code tried to talk to already shut down controller, or even
accessed resources failed to allocate.
Sponsored by: iXsystems, Inc.
Reserve 3b in the 14b atid to identify the owner and use it to dispatch
the CPL. This allows all CPLs that use an atid to be used as shared
CPLs, although ACT_OPEN_RPL is the only one being converted in this
revision.
Sponsored by: Chelsio Communications
dma_tag_payload should not be destroyed before payload_dma_map, and seems
it should be used there instead of dma_tag to match creation.
Sponsored by: iXsystems, Inc.
Resume starts CPU from the init state, which clears any loaded
microcode updates. As result, IBRS MSRs are no longer available,
until the microcode is reloaded.
I have to forcibly clear cpu_stdext_feature3, which assumes that CPUID
leaf 7 reg %ebx does not report anything except Meltdown/Spectre bugs
bits. If future CPUs add new bits there, hw_ibrs_recalculate() and
identify_cpu1()/identify_cpu2() need to be adjusted for that.
Submitted and tested by: Michael Danilov <mike.d.ft402@gmail.com>
PR: 227866
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15236
Previously it was possible to connect a socket (which had the
CAP_CONNECT right) by calling "connectat(AT_FDCWD, ...)" even in
capabilties mode. This combination should be treated the same as a call
to connect (i.e. forbidden in capabilities mode). Similarly for bindat.
Disable connectat/bindat with AT_FDCWD in capabilities mode, fix up the
documentation and add tests.
PR: 222632
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
Reviewed by: Domagoj Stolfa
MFC after: 1 week
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D15221
intended recipient of a CPL when it can't be determined solely from the
opcode. Retire the per-queue handlers for such CPLs in favor of the new
scheme.
Sponsored by: Chelsio Communications
through a SYSCTL instead of a compile time define.
Add quirk by default for all LynxPoint XHCI controllers.
PR: 227602
MFC after: 3 days
Sponsored by: Mellanox Technologies
Per the datasheet, the BUSY bit must be set when reading or writing PHY
registers. From Linux commit 80928805babf.
Submitted by: Arshan Khanifar
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15217
In smsc_phy_init function, when the driver was trying to reset PHY, it
didn't poll for the correct bit (BMCR_RESET) to be cleared. Instead, it
anded it with MII_BMCR (which is 0), so it just exited the loop.
This issue was fixed in Linux in commit d94609200069.
Submitted by: Arshan Khanifar
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
For the vm_fault_prefault() call from vm_fault_soft_fast(), extend the
scope of the object rlock to avoid re-taking it inside
vm_fault_prefault(). It causes pmap_enter_quick() sometimes called
with shadow object lock as well as the page lock, but this looks
innocent.
Noted and measured by: mjg
Reviewed by: alc, markj (as part of the larger patch)
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15122
GCC warns about the potentially confusing use of the binary AND ('&')
operator with a left operand containing an addition expression. (The
confusion would be around the operator precedence between the + and & infix
operators.) The warning is converted into an error with -Werror.
No functional change.
This construct was actually introduced in r328083, but r333059 (re)moved the
closing parentheses.
For reference, see http://en.cppreference.com/w/c/language/operator_precedence .
Name each ehci driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/ehci from kernel; already loaded from kernel
Name each ahci driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/ahci from kernel; already loaded from kernel
Previously, get_keyid() was returning the address of the receive key
instead of the transmit key when renegotiating the transmit key. This
could either hang the card (if a connection was only offloading TLS TX
and thus had a receive key address of -1) or cause the connection to
fail by overwriting the wrong key (if both RX and TX TLS were
offloaded).
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
While here predict false.
Note the code is wrong (regardless of this change). Dereference of the
pointer can race with module unload. A fix would set the probe to a
nop stub instead of NULL.
WHile gate_shift was present in the NM_CLK macro it wasn't set into the
clock definition structure resulting in NM clocks not being correctly
gated when they should.
If the module wasn't enabled by the bootloader it will have stayed ungated.
Switch test between zero based factor and power of two one.
This resulted in a miscalculation of the factor if it was a power
of two one.
Some clocks frequencies were not calculated correctly because of that.
Cached counters are typically zero at this point so it performs
avoidable atomics. Everything reading them also reads the cached
ones, thus there is really no point.
Reviewed by: jeff
Add a driver that match on 'rockchip,gpio-bank', this compatible
string is found on almost all RockChip SoC so this driver is compatible
with almost all of the RockChip SoCs.
The only features missing for this driver are :
- Interrupts support
- Debouncing
they are more in order of cache line use as one passes
through the tcp_input/output paths (non-errors most likely path). This
helps speed up cache line optimization so that the tcp stack runs
a bit more efficently.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D15136
Add pinctrl driver for RockChip SoCs. This device manage which function
to set on which pin and some other properties like pull up/down, drive
strength etc ...
For now the driver only support RK3328 but it is versatile enough to
add support for other RockChip SoC in the future.
RockChip GRF (General Register Files) is present on almost all RockChip
SoC and is used to control some area of the system like iomuxing, gpio
or usb phy.
We need it to be probed and attached early in the boot process so
subclass syscon_generic and set the pass to BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE.
The APL31 NDA errata is APL30 public errata. Add the reference and
provide the description [2].
Noted by: emaste [2], rpokala [1]
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This patch adds support for gpio and gpioled into ARMADA38X kernel
config.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14758
