2. Back out my change to ask about UTC/Localtime here. This *really* needs
to be done in tzsetup instead since putting it here only handles about
1/4 of the places where it needs to be.
Now that this is becoming (dare I even say it?) more useful for
post-configuration, no longer leave sysinstall.debug files around
by default. Only do this if environment variable SYSINSTALL_DEBUG
is set.
so that we're more useful in multi-user mode. This is still not
100%, but it pulls in a lot more than it used to. Some of the "composite"
variables in /etc/sysconfig are going to take more work.
o Always write /etc/resolv.conf and /etc/hosts if it makes sense to do
so.
o Reset media properly when reselecting. Longstanding bogon.
o Pull SIGPIPE handling out of package.c; I'm actually hoping to handle
this differently shortly.
o Fix bug where cancel in TCP setup dialog still checked data fields.
I think this closes a PR, but I will have to go look.
at the time, but on further reflection..." bucket with these changes.
1. Checking the media before frobbing the disks was a fine idea, and
I wish it could have worked, but that leads to a rather difficult
situation when you need to mount the media someplace and you're about
to:
a) Chroot away from your present root.
b) Newfs the root to be.
You're basically screwed since there's no place to stick the mount
point where it will be found following the newfs/chroot (and eliminating
the chroot in favor of just using the "root bias" feature would work
great for the distributions but not the pkg_add calls done by the
package installer).
2. Automatic timeout handling. I don't know why, but alarm() frequently
returns no residual even when the alarm didn't go off, which defies
the man page but hey, since when was that so unusual? Take out timeouts
but retain the code which temporarily replaces the SIGINT handler in
favor of a more media-specific handler. This way, at least, if it's hanging
you can at least whap it. I think the timeout code would have been losing
over *really slow* links anyway, so it's probably best that it go.
This should fix NFS, tape & CDROM installs again (serves me right for getting
complacent and using just the FTP installs in my testing).
more consistant in our use of the terms for differentiation between PC
partitions and traditional BSD partitions.
Submitted-By: obrien@cs.ucdavis.edu (David O'Brien)
section was a good thing, since it made it possible to detect media problems
*before* the installation started, but it also caused various things to
be mounted BEFORE the chroot() call, which definitely messes things up.
Fix this by detecting the pre-chroot() case and mounting into a subdir.
- Use MAP_FAILED instead of the constant -1 to indicate
failure (required by POSIX).
- Removed flag arguments of '0' (required by POSIX).
- Fixed code which expected an error return of 0.
- Fixed code which thought any address with the high bit set
was an error.
- Check for failure where no checks were present.
Discussed with: bde
bogus path and FTP I/O errors much earlier, offer retry possibilities
at steps along the way so you don't have to resume from the very beginning
again on a hard error.
1. Bus mouse selection didn't show up properly in mouse menu.
2. U&G management screen didn't respect cancel properly.
3. Novice not prompted to add users or set root password during installation.
4. Username length changes screw up user management form.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
Use consistent spelling throughout.
Remove unmount in fixit_common() since that's bogus in the CDROM case and
properly "shut down" the media device instead.
Disable saving of SCSI device parameters in userconfig saving in hopes
of working around a reported problem in the no-device case; there's no
point in saving this information here anyway.
2nd patch submitted-by: "Eric L. Hernes" <erich@lodgenet.com>
if wrong version.
2. Make sure network device is initialized in ftpInit
3. Eliminate bogus size values in the menus. For now, we'll have to admit
that nobody's added it up yet. In the future, these menus should be
build dynamically anyway, not declared static.
4. Add more debugging to networking code to chase the mystery ppp device
problem.
Remove a duplicate entry for ahc0 in hardware.hlp (closes PR #
docs/2282), a few additions all over the place while i was at it.
Tried to add as much of the important highlights for the new features
in 2.2 into the release notes. I still think that many things are
missing here, so folks, if you imported something great that's in 2.2
but not in 2.1.X, please review this section and send us your
additions!
Submitted by: seki@sysrap.cs.fujitsu.co.jp (for the ahc0 dup)
I don't want it in sysinstall/help, since that'll get it stuck on the
actual floppy, and I didn't fell like creating a doc/ subdirectory for
one file either. Bah.
use of stdio, I can't just go handing fileno(fp) around and expect
that to work. Since this means I need to have sysinstall play pipeline
on single file distributions now, that means I can also finally add a
progress indicator for them.
Change installation instructions to note that there's no dists directory
anymore on CDROMs.
I went over the code.
Add shortcuts for addUser and addGroup, documenting same.
Add a password field for adduser and use no-echo string field for it.
This requires my latest libdialog changes (in RELENG_2_2 or -current) to work.
1. Don't use the MSDOSFS code for accessing FreeBSD distribution data.
Use Robert Nordier's stand-alone DOS I/O library for the purpose.
It this works as well as Robert says it does, it should drastically reduce
(or even eliminate) our "I can't install from my DOS partition!" calls.
2. As a result of the above, go to stdio file descriptors for all
media types.
3. Taking advantage of #2, start using libftpio for FTP transfers instead
of maintaining our own parallel version of the FTP transfer code.
Yay! I ripped something out for a change!
#1 Submitted-By: Robert Nordier <rnordier@iafrica.com>
obvious effects are that most of the automagically chosen defaults
will now be displayed while going through the menu, and an improved
error handling thanks to the more detailed error status reporting.
2.2 fodder, but i'll leave it to Jordan's review.
bogus or overly complex and really needed to be done more consistently
and sanely throughout - no question about it. Done.
Suggested-By: Paul Traina <pst@Shockwave.COM>
which will also need to be brought in before this screen will work.
Add some commentary about how the slip startup code is bogus.
Steal Joerg's loop for more properly closing all files and graft it into
the EHS startup. My loop was functional but more bogus.
tar(1), but actually uses cpio(1). Many people are getting confused
about the lack of a tar on the fixit floppy, and simply don't know
that cpio can basically handle tar format fine (or they simply don't
know how to invoke cpio).
o Incorporate some of Tatsumi's bug fixes.
o Remove the xperimnt and commerce distribution items; they haven't
been actual distributions for awhile.
o Try to sanitize the device checking code a little more.
o Cosmetic work on the network code.
BLOAT! BLOAT! BLOAT! BLOAT!
Yes, but where else to put these stinking compat distributions. I, for one,
am bone tired of creating them by hand and then having everyone tell me I left
something out/in. Now any commiter can adjust the list as necessary, and I
forsee this as being so seldom necessary that I've simply committed the
uuencoded tarballs - these are from the last SNAP, and nobody complained
(for once) about that set.
the main menu.
2. Conditionalized a few small things which needed it.
3. Put PC98 X servers in their own menu, there are so many of them now.
4. Rampaged on the menus.c file in general, reformatting and cleaning up.
Not all mappings are supported, most languages come only with one
encoding since this should be sufficient to get up & running in using
sysinstall, and we are already pretty tight on space. (My previous
commit has already bumped the boot MFS size by another 50 KB for
this.)
This feature requires the `kbdcontrol -L' i've just committed. Plain
text keymaps and the entire scanner are overkill for sysinstall.
Also updated the list of available keymaps while i was at it.
Reviewed by: jkh
. Don't gzip the crunched binary by now; it just fits, and execution is
a lot faster this way (it's truly demand-paged again).
. Add more(1), ft(8), protocols(5), a stripped down services(5).
. Improve the .profile, and make sysinstall actually use it again.
Still no go for a 4 MB configuration though. :-(
but make a second attempt using MNT_FORCE, just in case it has been
unclean from a previous crash. That's dangerous, but far better than
keeping the despaired user standing in the rain...
(Experienced admins can still fsck it then, and remount. Others will
either totally crash, or incidentally succeed, without much further
help possible...)
Btw., mount(2) misses the description of MNT_FORCE for the mount
syscall.
Some changes of my own to make screen saver configuration a little
more sane, and also make it easier to get to the keyboard/screen
setup from the options menu.
place (sysinstall.h) when packages change rev.
Change the way that the routing daemon is configured entirely, to
placate Joerg. Also auto-load gated if it's specified, while we're at it.
This fixes the kernel panic when propagating userconfig changes to
arbitrary kernels.
Remove obsoleted `#include <tcl.h>' added a few <stdio.h> where
necessary.
Fix getting scsi bus information from an -incore kernel.
Turned on SAVE_USERCONFIG by default.
SLIP/PPP devices, putting them before the others in the network device
selection menu.
2. Change "Other" to "URL" so as not to conflict with the keyboard accellerator
for the "OK" button in FTP site selection menu.
3. Detect the NULL last symbol in the name list and initialize the other
members correctly.
First, change sysinstall and the Makefile rules to not build the kernel
nlist directly into sysinstall now. Instead, spit it out as an ascii
file in /stand and parse it from sysinstall later. This solves the chicken-n-
egg problem of building sysinstall into the fsimage before BOOTMFS is built
and can have its symbols extracted. Now we generate the symbol file in
release.8.
Second, add Poul-Henning's USERCONFIG_BOOT changes. These have two
effects:
1. Userconfig is always entered, rather than only after a -c
(don't scream yet, it's not as bad as it sounds).
2. Userconfig reads a message string which can optionally be
written just past the boot blocks. This string "preloads"
the userconfig input buffer and is parsed as user input.
If the first command is not "USERCONFIG", userconfig will
treat this as an implied "quit" (which is why you don't need
to scream - you never even know you went through userconfig
and back out again if you don't specifically ask for it),
otherwise it will read and execute the following commands
until a "quit" is seen or the end is reached, in which case
the normal userconfig command prompt will then be presented.
How to create your own startup sequences, using any boot.flp image
from the next snap forward (not yet, but soon):
% dd of=/dev/rfd0 seek=1 bs=512 count=1 conv=sync <<WAKKA_WAKKA_DOO
USERCONFIG
irq ed0 10
iomem ed0 0xcc000
disable ed1
quit
WAKKA_WAKKA_DOO
Third, add an intro screen to UserConfig so that users aren't just thrown
into this strange screen if userconfig is auto-launched. The default
boot.flp startup sequence is now, in fact, this:
USERCONFIG
intro
visual
(Since visual never returns, we don't need a following "quit").
Submitted-By: phk & jkh
kernel" mechanism. This is just the foundation - more work follows
and will be committed over the next few hours.
Submitted-by: "Eric L. Hernes" <erich@lodgenet.com> & jkh
and use /dev/console.
I really think the proper test is to determine which device has been configured
to be the console (remember the RB_SERIAL flag?) and use it instead of always
trying to open /dev/ttyv0 first.
and the user inserts a floppy), read the config file to pre-define variables
for a custom installation.
[Note: I fixed one bug in LOAD_CONFIG_FILE code, but it's still not perfect.]
pick up the old CVSROOT if we don't have the environment variable set.
If /usr/src/release/install.cfg is present, put it out onto
the root filesystem of the boot floppy. It may optionally be
used to pre-configure sysinstall with custom values. (See next
batch of commits).
Some things may still display text on the 24th line, but that's because
they've always been screens designed to fit into a minimal real-estate
and have hardwired assumptions about the dimensions. They'll be a little
harder to make dynamic.
