tq_name was used write-only and besides it was just a pointer, so it
could point to some garbage in a temporary buffer that's gone.
This change shouldn't change KPI/KBI as struct taskqueue is private to
subr_taskqueue.c.
If we find a need for tq_name it can be resurrected at any moment.
taskqueue_create() interface is preserved for this purpose.
Suggested by: jhb
MFC after: 10 days
Shorten the descriptive strings for Huawei devices. The vendor or
operator name should not be included in the device name.
Submitted by: Emile Coetzee
MFC after: 3 days
If getcwd fails, do not treat this as an error, but print a warning and
unset PWD. This is similar to the behaviour when starting the shell in a
directory whose name cannot be determined.
created in separated vnets. As a side-effect of having a separated
if_cloner instance for each vnet, all vlan ifnets created in a vnet
will be automatically destroyed when vnet teardown is initiated.
Disallow SIOCSETVLAN and SIOCGETVLAN ioctls on vlan ifnets which are
associated with physical ifnets residing in parent vnets.
This is an interim vlan-specific solution which will be superseded by a
more generic if_cloner V_irtualization change from p4. For nooptions
VIMAGE builds, this should be a no-op change.
Discussed with: bz
MFC after: 3 days
- Partially revert r172334; as it turns out the DELAYs in gem_reset_{r,t}x()
are actually necessary although bus space barriers and gem_bitwait() are
used, otherwise the controller may trigger an IOMMU errors on at least
sparc64. This is in line with what Linux and OpenSolaris do.
- Add some DSP init code for BCM5221. The values derived from Apple's GMAC
driver and the same init code also exists in Linux's sungem_phy driver.
- Only read media status bits when they are valid.
Obtained from: NetBSD, OpenBSD
It's been broken for several years and with all the binutils/toolchain
changes in flight, it might make more sense to put efforts into dtrace and
hwpmc instead.
Discussed with: phk
PR: bin/83558
autonegotiation along with manual media selection and also only report flow
control status when BMCR_AUTOEN is set (at least with gentbi(4) determining
the flow control status results in false-positives when not set), use
MIIF_NOMANPAUSE.
autonegotiation along with manual media selection and ukphy_status() also
only reports flow control status when BMCR_AUTOEN is set (at least with
gentbi(4) determining the flow control status results in false-positives
when not set), use MIIF_NOMANPAUSE.
- Many drivers on amd64 are picking system uptime, interrupt time and ticks
via global data structure instead of calling functions for performance
reasons. For now just patch such address so driver will not trigger page
fault when trying to access such data. In future, additional callout may
be added to update data in periodic intervals.
- On amd64 we need to allocate "shadow space" on stack before calling any
function.
Submitted by: Paul B Mahol <onemda at gmail.com>
According to the comment for MmIsAddressValid() there are issues on PAE
kernels using pmap_kextract().
Submitted by: Paul B Mahol <onemda at gmail.com>
Flushing TLBs is required to ensure cache coherency according to the AMD64
architecture manual. Flushing caches is only required when changing from a
cacheable memory type (WB, WP, or WT) to an uncacheable type (WC, UC, or
UC-). Since this function is only used once per processor during startup,
there is no need to take any shortcuts.
- Leave PAT indices 0-3 at the default of WB, WT, UC-, and UC. Program 5 as
WP (from default WT) and 6 as WC (from default UC-). Leave 4 and 7 at the
default of WB and UC. This is to avoid transition from a cacheable memory
type to an uncacheable type to minimize possible cache incoherency. Since
we perform flushing caches and TLBs now, this change may not be necessary
any more but we do not want to take any chances.
- Remove Apple hardware specific quirks. With the above changes, it seems
this hack is no longer needed.
- Improve pmap_cache_bits() with an array to map PAT memory type to index.
This array is initialized early from pmap_init_pat(), so that we do not need
to handle special cases in the function any more. Now this function is
identical on both amd64 and i386.
Reviewed by: jhb
Tested by: RM (reuf_m at hotmail dot com)
Ryszard Czekaj (rychoo at freeshell dot net)
army.of.root (army dot of dot root at googlemail dot com)
MFC after: 3 days
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.
Changes reverted:
------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines
Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.
------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines
Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines
Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
beacon or probe-response frames. Fix the condition by checking for the
the array's content instead of the always existing array itself.
Reviewed by: rpaulo, stefanf
MFC after: 3 days
and replace tsleep(9) with msleep(9) which doesn't use a timeout. The
previously used timeout caused the event process to wake up ten times
per second on an idle system.
one_event() is now called with the topology lock held and it returns
with both the topology and event locks held when there are no more
events in the queue.
Reported by: mav, Marius Nünnerich
Reviewed by: freebsd-geom
The Myri10GE NIC will assume all TSO frames contain partial checksum,
and will emit TSO segments with bad TCP checksums if a TSO frame
contains a full checksum. The mxge driver takes care to make sure
that TSO is disabled when checksum offload is disabled for this
reason. However, modules that modify packet contents (like pf) may
end up completing a checksum on a TSO frame, leading to the NIC emitting
TSO segments with bad checksums.
To workaround this, restore the partial checksum in the mxge driver
when we're fed a TSO frame with a full checksum.
Reported by: Bob Healey
MFC after: 3 days
thread specific informations.
In order to do that, and in order to avoid KBI breakage with existing
infrastructure the following semantic is implemented:
- For live programs, a new member to the PT_LWPINFO is added (pl_tdname)
- For cores, a new ELF note is added (NT_THRMISC) that can be used for
storing thread specific, miscellaneous, informations. Right now it is
just popluated with a thread name.
GDB, then, retrieves the correct informations from the corefile via the
BFD interface, as it groks the ELF notes and create appropriate
pseudo-sections.
Sponsored by: Sandvine Incorporated
Tested by: gianni
Discussed with: dim, kan, kib
MFC after: 2 weeks
properly aligned structure is atomic on all supported architectures, and
the thread that should see side-effect of assignment is the same thread
that does assignment.
Use a more appropriate conditional to detect the linux ABI.
Suggested by: kib
X-MFC: together with r215664
configured on ng_eiface ifnets. The default MTU remains unchanged at
1500 bytes.
Mark ng_eiface ifnets as IFCAP_VLAN_MTU capable, so that the associated
vlan(4) ifnets may use full-sized Ethernet MTUs (1500 bytes).
MFC after: 3 days
