always widen the imputed netmask if it is narrower than the specified octets.
fixes a strange behaviour where inet_net_pton would always return 4 (bits)
for multicast addresses no matter how many octets were specified.
negotiated with Paul Vixie, original author of this function.
PR: standards/53151
Submitted by: Max Laier <max@love2party.net>
Optained from: OpenBSD
technique) so that we don't wind up calling into an application's
version if the application defines them.
Inspired by: qpopper's interfering and buggy version of strlcpy
may be built into libc (`static NSS modules') or dynamically loaded
via dlopen (`dynamic NSS modules'). Modules are loaded/initialized
at configuration time (i.e. when nsdispatch is called and nsswitch.conf
is read or re-read).
= Make the nsdispatch(3) core thread-safe.
= New status code for nsdispatch(3) `NS_RETURN', currently used to
signal ERANGE-type issues.
= syslog(3) problems, don't warn/err/abort.
= Try harder to avoid namespace pollution.
= Implement some shims to assist in porting NSS modules written for
the GNU C Library nsswitch interface.
Sponsored by: DARPA, Network Associates Laboratories
Only warnings that could be fixed without changing the generated object
code and without restructuring the source code have been handled.
Reviewed by: /sbin/md5
- port range check need to be done before htons. from deraadt
- %d/%u audit
- correct bad practice in the code - it uses two changing variables
to manage buffer (buf and buflen). we eliminate buflen and use
fixed point (ep) as the ending pointer.
- use snprintf, not sprintf
- pass correct name into q.name. from lukem@netbsd
- sync comment
Obtained from: KAME
MFC after: 1 week
and getipnodeby*() thread-safe.
Our res_*() is not thread-safe. So, we share lock between
getaddrinfo() and getipnodeby*(). Still, we cannot use
getaddrinfo() and getipnodeby*() in conjunction with other
functions which call res_*().
Requested by: many people
KAME did the modification only to _dns_getaddrinfo(). However,
it is not sufficient, and res_queryN() should be modified, too.
So, I did same modification to res_queryN().
Obtained from: KAME
insure enough space is available for the response, or be prepared
to resize the buffer and retry as necessary.
Do the conservative thing and make sure enough space is available.
Reviewed by: silence on freebsd-audit
to fail needlessly if a reverse DNS lookup of the IP address didn't
come up with a hostname. As a comment in the code clearly stated,
the "damn hostname" was looked up only for the purpose of netgroup
matching. But if that lookup failed, the function bailed out
immediately even though in many cases netgroup matching would not
be used.
This change marks the hostname as unknown but continues. Where
netgroup matching is performed, an unknown hostname is handled
conservatively. I.e., for "+@netgroup" (accept) entries an unknown
hostname never matches, and for "-@netgroup" (reject) entries an
unknown hostname always matches.
In the lines affected (only), I also fixed a few bogus casts. There
are others, and in fact this entire file would be a good candidate
for a cleanup sweep.
Reviewed by: imp (wearing his flourescent yellow Security Team cap)
MFC after: 2 days
supplied buffer in case the size of it was equal to
the number of characters the converted address consumed.
The bug occurred when converting an AF_INET address.
- Remove the SPRINTF macro and use sprintf instead.
- Do not do string formatting using sprintf(3) and a
temporary buffer which is copied when the supplied
buffer provides enough space. Instead, use snprintf(3)
and the real destination buffer, thus avoid the copy.
Reported by: Stefan Farfeleder <e0026813@stud3.tuwien.ac.at> (1)
PR: misc/41289
of our __restrict macro to the prototypes and function
definitions of inet_pton and inet_ntop.
- Use ANSI-C function argument lists.
- Adjust the prototypes in the manual page.
This will make the behavior robuster if many addresses are added
after the size estimation of storage at the first sysctl.
Reviewed by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
MFC after: 1 week
- use strlcpy.
- snprintf can return negative value, so cope with it.
- tweak interface index on interface locals (ff01::/16).
- removed unused macros.
- removed a macro that uses only once (in a trivial context).
- explicitly say goodbye to ENI_xxx.
- constify struct afd.
Obtained from: KAME
MFC after: 1 week
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
change prototypes to be the same as in the original sun tirpc code.
Remove ()P macro in a file where the mayority had ()P already removed.
Add them if the mayority use ()P macros.
Submitted by: mbr
Requested by: bde
- Don't connect datagram socket if RES_INSECURE1.
- Needed to implement IPv6 anycast UDP DNS queries as documented in
<draft-ietf-ipngwg-dns-discovery-03.txt>.
Obtained from: KAME
o Hide nonstandard functions and types in <netinet/in.h> when
_POSIX_SOURCE is defined.
o Add some missing types (required by POSIX.1-200x) to <netinet/in.h>.
o Restore vendor ID from Rev 1.1 in <netinet/in.h> and make use of new
__FBSDID() macro.
o Fix some miscellaneous issues in <arpa/inet.h>.
o Correct final argument for the inet_ntop() function (POSIX.1-200x).
o Get rid of the namespace pollution from <sys/types.h> in
<arpa/inet.h>.
Reviewed by: fenner
Partially submitted by: bde
STANDARDS section of the page. Add one remark there about inet_pton(3)
only understanding decimal values (in contrast to inet_aton(3) and
friends who are happy with 0ac.020.25 for 172.16.0.25).
Caught by: ru
MFC after: 2 days
`warn'. Now a whole 2 members of the err() family don't cause pollution.
This fixes world breakage in awk for NOSHARED worlds. contrib/awk/msg.c
has had its own version of err() for a long time, but this somehow
didn't cause problems until the update to awk-3.1.0.
hosts:!!!!!!!!@@@@@$%^&*()()*$(files{}{}|||++!)(dns
exactly the same as:
hosts: files dns
Recover from parse errors by looking for the end of a line; this
allows entries without errors to still be parsed even if there is
an erroneous entry earlier in the file.
using rcmd directly. This has been in my tree for a long time, but we
may need to sync with OpenBSD before MFC.
Obtained from: openbsd
PR: 15830
MFC after: 2 months
o Unify <machine/endian.h>'s across all architectures.
o Make bswapXX() functions use a different spelling of u_int16_t and
friends to reduce namespace pollution. The bswapXX() functions
don't actually exist, but we'll probably import these at some
point. Atleast one driver (if_de) depends on bswapXX() for big
endian cases.
o Deprecate byteorder(3) prototypes from <sys/types.h>, these are
now prototyped indirectly in <arpa/inet.h>.
o Deprecate in_addr_t and in_port_t typedefs in <sys/types.h>, these
are now typedef'd in <arpa/inet.h>.
o Change byteorder(3) prototypes to use standards compliant uint32_t
(spelled __uint32_t to reduce namespace pollution).
o Document new preferred headers and standards compliance.
Discussed with: bde
PR: 29946
Reviewed by: bmilekic
is stored in _res_ext.sort_list, and sortlist for IPv4 is stored in
_res.sort_list for backward compatibility. However, both sort_list's
are maintaind by just one index _res.nsort. So, when IPv6 address is
specified to sortlist, empty entry was created in _res.sort_list. It
broke sortlist facility of gethostbyname().
Discussed on users@jp.ipv6.org.
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
IPv6 transport-ready resolvers/DNS servers. Need careful configuration
when enable it. (default config is not affected).
See manpage for details.
XXX visible symbol __res_opt() is added, however, it is not supposed to be
called from outside, libc minor is not bumped.
Obtained from: KAME/NetBSD
to be the same as -ragged in the current implementation) to
-ragged. With mdocNG, -filled displays produce the correct
output, formatted and justified to both margins.
adding (weak definitions to) stubs for some of the pthread
functions. If the threads library is linked in, the real
pthread functions will pulled in.
Use the following convention for system calls wrapped by the
threads library:
__sys_foo - actual system call
_foo - weak definition to __sys_foo
foo - weak definition to __sys_foo
Change all libc uses of system calls wrapped by the threads
library from foo to _foo. In order to define the prototypes
for _foo(), we introduce namespace.h and un-namespace.h
(suggested by bde). All files that need to reference these
system calls, should include namespace.h before any standard
includes, then include un-namespace.h after the standard
includes and before any local includes. <db.h> is an exception
and shouldn't be included in between namespace.h and
un-namespace.h namespace.h will define foo to _foo, and
un-namespace.h will undefine foo.
Try to eliminate some of the recursive calls to MT-safe
functions in libc/stdio in preparation for adding a mutex
to FILE. We have recursive mutexes, but would like to avoid
using them if possible.
Remove uneeded includes of <errno.h> from a few files.
Add $FreeBSD$ to a few files in order to pass commitprep.
Approved by: -arch
- iruserok_sa() and __ivaliduser_af() were re-organized to use
__ivaliduser_sa()
- __icheckhost() was re-written to use getaddrinfo() instead of
getipnodebyname()
- better handling of multiple destination addresses in rcmd()
These changes were basically taken from KAME and changed to fit our
rcmd.c.
Obtained from: KAME
response to return. This will stop processes waiting on DNS requests
from being woken up when a select collision occurs. This was tested
on mx1.FreeBSD.org (outgoing mail for the FreeBSD.org mailing
lists.)
Reviewed by: jlemon, peter
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.
= Hesiod has been added to libc (see hesiod(3)).
= A library routine for parsing nsswitch.conf and invoking callback
functions as specified has been added to libc (see nsdispatch(3)).
= The following C library functions have been modified to use nsdispatch:
. getgrent, getgrnam, getgrgid
. getpwent, getpwnam, getpwuid
. getusershell
. getaddrinfo
. gethostbyname, gethostbyname2, gethostbyaddr
. getnetbyname, getnetbyaddr
. getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr
= host.conf has been removed from src/etc. rc.network has been modified
to warn that host.conf is no longer used at boot time. In addition, if
there is a host.conf but no nsswitch.conf, the latter is created at boot
time from the former.
Obtained from: NetBSD
I changed to close to original code before merging IPv6 support.
It seems having delay before another try is useless. However, I'm
not sure that delay means. So, I leave it as-is.
PR: bin/20515
strdup()) rather than pointing it at something that's free()d
(via freeaddrinfo(res)) before the function returns.
I appreciate that this is an API change, but it's the only way
(AFAIK) of doing this without breaking existing code that uses
rcmd{,_af}().
Pointed out by: phkmalloc
management involving rcmd_af(), getaddrinfo(), freeaddrinfo(), etc.
We set *ahost to point to ai->canonname; and later free the ai-> stuff
and still leave the old pointers in *ahost to the freed data.
Perhaps the best way to deal with this is a static buffer or a static
strdup() that is freed on the next iteration or something. This gives
me headaches just thinking about this.
The new 'AJ' default for malloc() tripped this up.
- permit numeric scopeid, be more careful about buffer size
TODO: 2nd arg type should be socklen_t for RFC2553 conformance,
but due to include file dependency it is not a easy thing to do
(netdb.h does not have socklen_t)
interface addresses in a portable manner, without headache of SIOCGIFCONF
or sysctl. it is in bsdi/openbsd/netbsd already.
from kame tree (actually, mandatory for latest kame tree).
when parsing certain DNS records during a reverse address resolution. Thus
when code tries to examine the returned host name, it dereferences a null
pointer :-(
Problem noticed by: ps
getaddrinfo() accidentally returns IPv4 mapped IPv6 address instead
of native IPv4 address.
Now, getaddinfo() is scoped address ready. You can put scoped
address within /etc/hosts.
Obtained from: KAME Project.
from
all AAAA trial, then all A trial
to
try AAAA and A for each trial
TODO: more fix for the case where IPv4 mapped IPv6 addr is disabled
Reviewed by: ume
some reason. This will prevent an infinite loop if (say) a sigalarm is
being scheduled at a more frequent interval than the poll timeout.
PR: 2191, 8847, 10553
-Added more description.
-Many grammer fix.
-Fix hard sentence break.
-Many other man style fix.
Thanks for bde finding out the problem.
Thanks for sheldon for the patient and thorough review.
:-)
Submitted by: bde
Reviewed by: sheldonh
Sorry for the flapping, but no change will be done for 4.0 anymore.
Official standard will be published around April or later.
If different format would be adopted at that time, then support for
the new format will be added to the succeeding FreeBSD 4.x.
Approved by: jkh
fit in the static buffer. This fix causes it to look like there is no
data available, which is also wrong but is better than dumping core.
PR: bin/10344
Reviewed by: billf
Approved by: jkh
-Should not error return when rresvport_af() failed for one of dest
addrs resolved by getaddrinfo().
Should retry until all dest addr fail.
Approved by: jkh
(shortend format, etc)
Current KAME getaddrinfo() supports only d.d.d.d format IPv4
addr. But traditionally inet_aton() and etc support other formats.
(shortend format and octal/deciaml/hex format)
Aboud this,
-As far as the discussion on freebsd-current, many people
think traditional format should also be supported by getaddrinfo().
-X/Open spec requires getaddrinfo() also support those
traditional IPv4 format.
-RFC2553 say nothing about it.
-As the result of confirmation in ietf/ipng list, there is
no clear concensus yet, and the reply was, "RFC2553 update
and X/Open spec will be in sync"
So takeing these conditions into account, I think
getaddrinfo() should also support traditional IPv4 format.
Specified by: Marc Schneiders <marc@oldserver.demon.nl>
Approved by: jkh
KAME scoped addr format is changed recently.
before: addr@scope
now: scope%addr
Because the end of IPv6 numeric addr is tend to be truncated in
`netstat -rn ` output, so placing scope part at starting of addr
will be convenient.
Approved by: jkh
Obtained from: KAME project
Some of rcmd related function is need to be updated to
support IPv6. Some of them are already updated as standard
document. But there is also several de-facto functions and
they are not listed in standard documents.
They are,
iruserok() (used by rlogind, rshd)
ruserok() (used by kerberos, etc)
KAME package updated those functions in original way.
iruserok_af()
ruserok_af()
But recently there was discussion on IETF IPng mailing
list about how to sync those API, and it is decided,
-Those function is not standard and not documented.
-But let BSDs sync their API as de-facto.
And after some discussion, it is announced that
-add update to iruserok() as iruserok_sa()
-no ruserok() API change(it is only updated internaly)
So I sync those API before 4.0 is released.
The changes are,
-prototype changes
-ruserok() internal update (use iruserok_sa() inside)
-removal of ruserok_af()
-change iruserok_af() as static functioin, and also prefix the name with __.
-add iruserok_sa() (Just call __iruserok_af() inside)
-adding flag AI_ALL to getipnodebyaddr() called from __icheckhost().
This is necessary to support IPv4 communication via AF_INET6 socket
could be correctly authenticated via iruserok_sa()
-irusreok_af() call is replaced to iruserok_sa() call
in rlogind, and rshd.
Approved by: jkh
just use _foo() <-- foo(). In the case of a libpthread that doesn't do
call conversion (such as linuxthreads and our upcoming libpthread), this
is adequate. In the case of libc_r, we still need three names, which are
now _thread_sys_foo() <-- _foo() <-- foo().
Convert all internal libc usage of: aio_suspend(), close(), fsync(), msync(),
nanosleep(), open(), fcntl(), read(), and write() to _foo() instead of foo().
Remove all internal libc usage of: creat(), pause(), sleep(), system(),
tcdrain(), wait(), and waitpid().
Make thread cancellation fully POSIX-compliant.
Suggested by: deischen
-changed bindresvport2 to bindresvport_sa
-merged the man into bindresvport.3
All discussion between Jean-Luc Richier <Jean-Luc.Richier@imag.fr>,
Theo de Raadt <deraadt@cvs.openbsd.org>, itojun, is reflected to
this code. (Actually Theo de Raadt write the code simultaneously as the
discussion change.)
obtained from itojun.
-don't filter address families which are not supported by system at
FQDN resolving.
-don't do reverse lookup
I think I checked all lib and tools which use getaddrinfo() if
this change affect them.
Obtained from: KAME project
points. For library functions, the pattern is __sleep() <--
_libc_sleep() <-- sleep(). The arrows represent weak aliases. For
system calls, the pattern is _read() <-- _libc_read() <-- read().
(1)added error check of if_nameindex() return value at getaddrinfo().
(2)print out more detailed information when getaddrinfo() error value
is EAI_SYSTEM.(in this case system error num is kept in errno)
(1) is Discovered by: jinmei@kame.net in KAME environment.
