sys/fs/nwfs/nwfs_vfsop= s.c, introduced with the conversion to
nmount with revision 1.38. This causes mount_nwfs to fail with
the error message:
mount_nwfs: mount error: /mnt/netware: syserr = No such file or directo=
ry
This is caused by a typo on line 178, which specifies "nwfw_args"
rather than "nwfs_args".
Submitted by: Antony Mawer <gnats@mawer.org>
Fat fingers: phk
PR: 86757
MFC: 3 days
up. This make iostat report operations passed down to the device driver
instead of operations passed down to GEOM disk. The transfer size limit
imposed by the device driver is no longer hidden, improving the correlation
between iostat output and device driver workload.
Split commands into two groups: one with optional count and one with
required argument. Changed synopsis line accordingly.
Added some hopefully-helpful comments based on experiments, knowing
that not all hardware works the same.
PR: docs/84101
Approved by: keramida
MFC after: 3 days
> Cause all flags passed by boot2 to set the respective loader(8)
> boot_* variable. The end effect is that all flags from boot2
> are now passed to the kernel.
Add a new private thread flag to indicate that the thread should
not sleep if runningbufspace is too large.
Set this flag on the bufdaemon and syncer threads so that they skip
the waitrunningbufspace() call in bufwrite() rather than than
checking the proc pointer vs. the known proc pointers for these two
threads. A way of preventing these threads from being starved for
I/O but still placing limits on their outstanding I/O would be
desirable.
Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from
blocking on the runningbufspace check while holding snaplk. This
prevents snaplk from being held for an arbitrarily long period of
time if runningbufspace is high and greatly reduces the contention
for snaplk. The disadvantage is that ffs_copyonwrite() can start
a large amount of I/O if there are a large number of snapshots,
which could cause a deadlock in other parts of the code.
Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace
before attempting to grab snaplk so that I/O requests waiting on
snaplk are not counted in runningbufspace as being in-progress.
Increment runningbufspace again before actually launching the
original I/O request.
Prior to the above two changes, the system could deadlock if enough
I/O requests were blocked by snaplk to prevent runningbufspace from
falling below lorunningspace and one of the bawrite() calls in
ffs_copyonwrite() blocked in waitrunningbufspace() while holding
snaplk.
See <http://www.holm.cc/stress/log/cons143.html>
introduce "-tunnel" as an alias for "deletetunnel".
The latter is overly long and prone to typos, but
keep it for POLA since it costs nothing.
MFC after: 5 days
the directory's inode after queuing the dirrem that will decrement
the parent directory's link count. This will force the update of
the parent directory's actual link to actually be scheduled. Without
this change the parent directory's actual link count would not be
updated until ufs_inactive() cleared the inode of the newly removed
directory, which might be deferred indefinitely. ufs_inactive()
will not be called as long as any process holds a reference to the
removed directory, and ufs_inactive() will not clear the inode if
the link count is non-zero, which could be the result of an earlier
system crash.
If a background fsck is run before the update of the parent directory's
actual link count has been performed, or at least scheduled by
putting the dirrem on the leaf directory's inodedep id_bufwait list,
fsck will corrupt the file system by decrementing the parent
directory's effective link count, which was previously correct
because it already took the removal of the leaf directory into
account, and setting the actual link count to the same value as the
effective link count after the dangling, removed, leaf directory
has been removed. This happens because fsck acts based on the
actual link count, which will be too high when fsck creates the
file system snapshot that it references.
This change has the fortunate side effect of more quickly cleaning
up the large number dirrem structures that linger for an extended
time after the removal of a large directory tree. It also fixes a
potential problem with the shutdown of the syncer thread timing out
if the system is rebooted immediately after removing a large directory
tree.
Submitted by: tegge
MFC after: 3 days
earlier, and more gracefully. Previously, this combination would be
ignored early in the code where permissions are tested and fail later
with a very unhelpful "permission denied" error.
Instead, test for this flag in the same block that generates the
"override?" messages for read-only files, but instead of trying
to guess what the user has in mind, generate an error and exit.
Update the man page to reflect this new behavior.
Not objected to by: freebsd-hackers@
interrupt handler from Alpha. Instead, expand the scheduler pinning
in the interrupt handling code so that curthread is pinned while executing
fast interrupt handlers.
MFC after: 1 week
the softc.
- Use callout_init_mtx() and rather than timeout/untimeout in both rl(4)
and re(4).
- Fix locking for ifmedia by locking the driver in the ifmedia handlers
rather than in the miibus functions. (re(4) didn't lock the mii stuff
at all!)
- Fix some locking in re_ioctl().
Note: the two drivers share the same softc declared in if_rlreg.h, so they
had to be change simultaneously.
MFC after: 1 week
Tested by: several on rl(4), none on re(4)
routing, etc. in a static pci_assign_interrupt() function.
- Add a sledgehammer that allows the user to override the interrupt
assignment of any PCI device via a tunable (e.g. "hw.pci0.7.INTB=5" would
force any functions on the pci device in slot 7 of bus 0 that use B# to
use IRQ 5). This should be used with great caution! Generally, if the
interrupt routing in use provides specific tunables (such as hard-wiring
the IRQ for a given $PIR or ACPI PCI link device), then those should be
used instead. One instance where this tunable might be useful is if a
box has an MPTable with duplicate entries for the same PCI device with
different IRQs.
MFC after: 1 week
the Intel 82371AB PCI-ISA bridge. We now do this all the time for the
!APIC case in the atpic driver. This cuts the raw line count for this
driver by about 40%.
MFC after: 1 week
There seems to be very little documentary evidence outside this
implementation to suggest a these checks are neccessary, and more
than one camera-formatted flash disk fails the check, but mounts
successfully on most other systems.
Reviewed By: bde@
make function reenterable. In the runtime the race is masked by serializing
of em_process_receive_interrupts() either by interrupt thread, or by
polling. The race can be triggered when polling is switched on or off.
bio may have been freed and reassigned by the wakeup before being
tested after releasing the bdonelock.
There's a non-zero chance this is the cause of a few of the crashes
knocking around with biodone() sitting in the stack backtrace.
Reviewed By: phk@
