option. Convert all other uses to MK_CTF=no. Set MK_CTF=no rather than
the indirect WITHOUT_CDDL in filemon regression. It is expected that
NO_CTF will be removed in FreeBSD 12 entirely.
Device type and revision is now determined from the bcdDevice field and
doesn't need to be in the table at all. The feature that skips creation
of /dev/ttyU* entries for jtag and gpio interfaces is enhanced:
- The feature is now optional, but enabled by default. A tunable and
sysctl are available to control it: hw.usb.uftdi.skip_jtag_interfaces.
- We no longer assume interface #0 is the only jtag interface. Up to
eight interfaces per chip can be flagged as jtag. (Current ftdi chips
support a max of 4 interfaces; this leaves room for growth.)
- Some manufacturers don't change the product ID or use the same ID for
different devices intended for both serial-comms and jtag/gpio use.
Often while the product ID is the same, the product name string is
different, so it's now possible to search for the product name in a
table of strings and get the set of non-tty interfaces from that table.
Restore make-memstick.sh back to its original state to
unbreak booting for machines that do not support GPT.
I have in-progress work to keep the MBR layout and add
the EFI partition, but it is not yet ready, and does
need at least one full release build to be certain it
does not break.
Sponsored by: The FreeBSD Foundation
Ignore writes, and return 0xff's, on config accesses when not set.
Behaviour now matches that seen on h/w.
Found with a NetBSD/amd64 guest.
Reviewed by: tychon
MFC after: 3 weeks
- DIOCADDADDR adds addresses and puts them into V_pf_pabuf
- DIOCADDRULE takes all addresses from V_pf_pabuf and links
them into rule.
The ugly part is that if address is a table, then it is initialized
in DIOCADDRULE, because we need ruleset, and DIOCADDADDR doesn't
supply ruleset. But if address is a dynaddr, we need address family,
and address family could be different for different addresses in one
rule, so dynaddr is initialized in DIOCADDADDR.
This leads to the entangled state of addresses on V_pf_pabuf. Some are
initialized, and some not. That's why running pf_empty_pool(&V_pf_pabuf)
can lead to a panic on a NULL table address.
Since proper fix requires API/ABI change, for now simply plug the panic
in pf_empty_pool().
Reported by: danger
- Indent 1 full tab where needed
- Use $() for shell exec
- Insert a space between '$(( ))' parens
MFC After: 1 week
X-MFC-With: r264907
Sponsored by: The FreeBSD Foundation
dedicated' partition scheme, reported to cause the memstick.img
to fail to boot.
Similar to how make-memstick.sh worked on stable/8, use makefs(8)
to create the actual filesystem. Then calculate the size of the
resulting image file, create the GPT partition scheme, then dd(1)
the filesystem created with makefs(8) to the freebsd-ufs GPT
partition.
This was tested on a known-working machine[1] for regression, and
a known-not-working machine[2] to ensure the boot issue has been
resolved.
Testers: myself [1], db [2]
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
request during SLEEP results in a hang.
Whilst I'm here, add in some disabled code that will transition to RUN
if there's multicast traffic. It's not needed for Atheros hardware but
it may be for other hardware.
Tested:
* AR5416, STA mode (powersave)
* AR5212, STA mode (powersave)
These two bugs are closely related. The root cause is that ifa_ifwithnet
does not consider FIBs when searching for an interface address.
sys/net/if_var.h
sys/net/if.c
Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those
functions will only return an address whose interface fib equals the
argument.
sys/net/route.c
Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib
arguments.
sys/netinet/in.c
Update in_addprefix to consider the interface fib when adding
prefixes. This will prevent it from not adding a subnet route when
one already exists on a different fib.
sys/net/rtsock.c
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/netinet6/nd6.c
Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet.
In some cases it there wasn't a clear specific fib number to use.
In others, I was unable to test those functions so I chose
RT_DEFAULT_FIB to minimize divergence from current behavior. I will
fix some of the latter changes along with PR kern/187553.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
Revert r263738. The udp_dontroute test was right all along.
However, bugs kern/187550 and kern/187553 cancelled each other out
when it came to this test. Because of kern/187553, ifa_ifwithnet
searched the default fib instead of the requested one, but because
of kern/187550, there was an applicable subnet route on the default
fib. The new test added in r263738 doesn't work right, however. I
can verify with dtrace that ifa_ifwithnet returned the wrong address
before I applied this commit, but route(8) miraculously found the
correct interface to use anyway. I don't know how.
Clear expected failure messages for kern/187550 and kern/187552.
PR: kern/187550
PR: kern/187552
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic
SLEEP rather than RUN.
Without this things like 'ifconfig wlan0 list sta' don't work when the
NIC is power save.
Tested:
* AR5212, STA mode (with powersave)
* AR5416, STA mode (with powersave)
commit 003649d9622ce252a2794ae5891ee7e7c209caca
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Wed Feb 5 18:32:09 2014 +0000
Teach the FreeBSD/beri boot to "auto-detect" whether argument 4 (a3) is a
memory size of pointer to a struct bootinfo * by looking at its value and
seeing whether it is pointer-like. If a pointer, assume it's a bootinfo
and extract memsize from it instead; otherwise, use it as memsize directly.
This allows kernels to support bootinfo being passed by loader (and boot2)
while still supporting older Miniboot setups.
commit f7045af9a1e92b6bd92541fe5d25abf66d824e8f
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Thu Feb 6 13:45:34 2014 +0000
When the module metadata pointer is available from loader, use it in the
kernel.
commit 52e0e1ff2cba9dfcfab9e1d0a31fb7fdf7317450
Author: Robert N. M. Watson <robert.watson@cl.cam.ac.uk>
Date: Thu Feb 6 19:57:48 2014 +0000
In the BERI kernel boot code, extract 'boothowto' (which includes boot flags
such as '-s') and 'envp' from passed module data. Booting to single-user
mode using boot flags now works.
Sponsored by: DARPA, AFRL
FAT12 1..4084
FAT16 4085..65524
FAT32 65525..
This is required for interoperability with other FAT implementations,
and in particular UEFI.
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
for the VOP_READ() call. This patch fixes both the old and new
server for this case.
PR: 185232
Submitted by: PR had patch for old server
Reviewed by: kib
MFC after: 2 weeks
sys/net/route.c
In rtinit1, use the interface fib instead of the process fib. The
latter wasn't very useful because ifconfig(8) is usually invoked
with the default process fib. Changing ifconfig(8) to use setfib(2)
would be redundant, because it already sets the interface fib.
tests/sys/netinet/fibs_test.sh
Clear the expected ATF failure
sys/net/if.c
Pass the interface fib in calls to rtrequest1_fib and rtalloc1_fib
sys/netinet/in.c
sys/net/if_var.h
Add a fibnum argument to ifa_switch_loopback_route, a subroutine of
in_scrubprefix. Pass it the interface fib.
PR: kern/187549
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
Instead of allocating up to 16MB or RAM at once to handle whole I/O,
allocate up to 1MB at a time, but do multiple ctl_datamove() and storage
I/Os if needed.
Some of the code in xen-locore.S was picked from Cherry G. Mathew
amd64 Xen PV branch, but I've failed to set the proper copyright, so
do it now.
Approved by: gibbs
