As suggested in:
https://wiki.freebsd.org/WhatsGoing/FreeBSD13
We will be dropping the snd_ds1 driver. The driver is known to be buggy
and no one has been working on it for years now.
Users of old Yamaha cards may have luck with the OSS drivers instead.
MFC after: 3 days
Diferential Revision: https://reviews.freebsd.org/D21138
with Communication Device Class Ethernet Emulation Model (CDC EEM).
The driver supports both the device, and host side operation; there
is a new USB template (#11) for the former.
This enables communication with virtual USB NIC provided by iLO 5,
as found in new HPE Proliant servers.
Reviewed by: hselasky
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Hewlett Packard Enterprise
Instances of the device can be configured using hints or FDT data.
Interfaces to reconfigure the chip and extract voltage measurements from
it are available via sysctl(8).
* Initialize the alpha parameter to a conservative value (like Linux)
* Improve handling of arithmetic.
* Improve man-page
Obtained from: Richard Scheffenegger
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20549
of the TCP TS offset from taking the IP addresses and the TCP port
numbers into account to a version just taking only the IP addresses
into account. This works around broken middleboxes or endpoints.
The default is to keep the behaviour, which is also the behaviour
recommended in RFC 7323.
Reported by: devgs@ukr.net
Reviewed by: rrs@
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D20980
We don't split the other man pages in their own package so do the same for runtime.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20962
The nvme drive dumps only the most relevant details about a command when it
fails. However, there are times this is not sufficient (such as debugging weird
issues for a new drive with a vendor). Setting hw.nvme.verbose_cmd_dump=1
in loader.conf will enable more complete debugging information about each
command that fails.
Reviewed by: rpokala
Sponsored by: Netflix
Differential Version: https://reviews.freebsd.org/D20988
with various laptops using hdaa(4) sound devices. We don't seem to know
the "correct" configurations for these devices and the defaults are far
superiour, e.g. they work if you don't nuke the default configs.
PR: 200526
Differential Revision: https://reviews.freebsd.org/D17772
Change to use registers instead of register, as it is customary to use
plural when talking about PCI registers.
This was missed in r349150.
MFC after: 3 days
"pin_list" allows to specify child pins as a list of pin numbers.
Existing hint "pins" serves the same purpose but with a 32-bit wide bit
mask. One problem with that is that a controller can have more than 32
pins. One example is amdgpio. Also, a list of numbers is a little bit
more human friendly than a matching bit mask. As a side note, it seems
that in FDT pins are typically specified by their numbers as well.
This commit also adds accessors for instance variables (IVARs) that
define the child pins. My primary goal is to allow a child to be
configured programmatically rather than via hints (assuming that FDT is
not supported on a platform). Also, while a child should not care about
specific pin numbers that are allocated to it, it could be interested in
how many were actually assigned to it.
While there, I removed "flags" instance variable. It was unused.
Reviewed by: mizhka
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20459
"at" keyword is documented in device.hints(5) for all buses, but it does
hurt to add another reference to it.
"pins" keyword is specific to gpiobus.
At least these two hints should be configured for any gpiobus device on
a hints based system.
MFC after: 10 days
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Add missing words after PCI in the description of the PCIOCWRITE and
PCIOCATTACHED ioctls.
Use singular in PCIOCREAD, we only read one register at the time.
Reviewed by: bcr, bjk, rgrimes, cem
MFC after: 2 weeks
X-MFC-with: r349133
Differential Revision: https://reviews.freebsd.org/D20671
Document the PCIOCATTACHED ioctl(2) in the pci(4) manual.
PCIOCATTACHED is used to query if a driver has attached to a PCI.
Reviewed by: bcr, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20652
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.
This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20031
ccr depends on symbols exported by the cxgbe driver as well as having
a runtime dependency. While the runtime depenency was noted in the
manpage already, the compile-time dependency wasn't as clear.
PR: 238265
MFC after: 3 days
Sponsored by: Chelsio Communications
struct xucred. Do not bump XUCRED_VERSION as struct layout is not changed.
PR: 215202
Reviewed by: tijl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20415
The issues were pointed in community review:
https://reviews.freebsd.org/D10427#inline-67587
Also, fix other issues found by the igor tool.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
