it must reset its congestion window back to the initial window.
RFC3390 has increased the initial window from 1 segment to up to
4 segments.
The initial window increase of RFC3390 wasn't reflected into the
restart window which remained at its original defaults of 4 segments
for local and 1 segment for all other connections. Both values are
controllable through sysctl net.inet.tcp.local_slowstart_flightsize
and net.inet.tcp.slowstart_flightsize.
The increase helps TCP's slow start algorithm to open up the congestion
window much faster.
Reviewed by: lstewart
MFC after: 1 week
instead of stdio. This gives BSD grep a very big performance boost,
its speed is now almost comparable to GNU grep.
Submitted by: Dimitry Andric <dimitry@andric.com>
Approved by: delphij (mentor)
sysctl's and remove any side effects.
Both sysctl's share the same backend infrastructure and due to the
way it was implemented enabling net.inet.tcp.log_in_vain would also
cause log_debug output to be generated. This was surprising and
eventually annoying to the user.
The log output backend is kept the same but a little shim is inserted
to properly separate log_in_vain and log_debug and to remove any side
effects.
PR: kern/137317
MFC after: 1 week
1. On n64, use XKPHYS to map page table pages instead of KSEG0. Maintain
just one freepages list on n64.
The changes are mainly to introduce MIPS_PHYS_TO_DIRECT(pa),
MIPS_DIRECT_TO_PHYS(), which will use KSEG0 in 32 bit compilation
and XKPHYS in 64 bit compilation.
2. Change macro based PMAP_LMEM_MAP1(), PMAP_LMEM_MAP2(), PMAP_LMEM_UNMAP()
to inline functions.
3. Introduce MIPS_DIRECT_MAPPABLE(pa), which will further reduce the cases
in which we will need to have a special case for 64 bit compilation.
4. Update CP0 hazard definitions for CPU_RMI - the cpu does not need any
nops
Reviewed by: neel
number of syncache entries into account for the surplus we add to account
for a possible increase of records in the re-entry window.
Discussed with: jhb, silby
MFC after: 1 week
Each of these SoCs have different devices, different hardware initialisation
methods and, quite likely, different quirks. These functions will abstract
out the SoC differences and keep these differences out of the drivers (eg
USB init, if_arge, etc.)
Makefiles or *.mk files, use ${CC:T:Mfoo} instead, so only the basename
of the compiler command (excluding any arguments) is considered.
This allows you to use, for example, CC="/nondefault/path/clang -xxx",
and still have the various tests in bsd.*.mk identify your compiler as
clang correctly.
ICC if cases were also changed.
Submitted by: Dimitry Andric <dimitry at andric.com>
and 3.3 (build the modules). IMHO, this makes it a little easier to
track the progress of a kernel build using whereintheworld et al.
MFC after: 3 weeks
memory size estimate to userland for pcb list sysctls. The previous
behavior of a "slop" of n/8 does not work well for small values of n
(e.g. no slop at all if you have less than 8 open UDP connections).
Reviewed by: bz
MFC after: 1 week
method is used by the PCI bus driver to query the power management system
to determine the proper device state to be used for a device during suspend
and resume. For the ACPI PCI bridge drivers this calls
acpi_device_pwr_for_sleep(). This removes ACPI-specific knowledge from
the PCI and PCI-PCI bridge drivers.
Reviewed by: jkim
gnu/usr.bin/cc/libiberty first defines the PREFIX macro, and then
undefines it again, so mkdep with clang complains.
Submitted by: Dimitry Andric <dimitry at andric.com>
Reviewed by: ru
- Fix start times of DST for Egypt.
- clocks were set back one hour at 2010-08-11 00:00:00 local time
in Gaza and the West Bank.
Obtained from: ftp://elsie.nci.nih.gov/pub/
onto it, which may have been used for rounding purposes in other utilities.
PR: bin/147934
Submitted by: Janne Snabb <snabb at epipe.com>
Approved by: rrs (mentor)
MFC after: 2 weeks
pagesize()/pagesizes() after change to use aux vector. Note that
public function getosreldate() is different from libc-internal
__getosreldate() and does not use aux to fetch osreldate value.
MFC after: 1 month
can't check to see if sysinstall is running as init just by checking if the
PID is 0. Introduce a new option that sets the RunningAsInit flag, and update
the code to check RunningAsInit intstead of getpid().
PR: bin/38854
Submitted by: Peter Sedeffow <peter at trumanbrewery.com>
Approved by: rrs (mentor)
MFC after: 1 month
number of host CPUs and osreldate.
This eliminates the last sysctl(2) calls from the dynamically linked image
startup.
No objections from: kan
Tested by: marius (sparc64)
MFC after: 1 month
Use local version of getpagesize(), rtld_getpagesize() in private allocator.
Override the __getosreldate() previously fetched from libc_pic.a with
local version that uses aux value if present. Note that __getosreldate()
is used by rtld indirectly, by mmap(2) libc wrapper.
To be able to utilize aux, split digest_dynamic() for use by init_rtld()
into two parts, where the first one does not call malloc(), and the
second part uses it. init_rtld() is able to initialize global variables
before digest_dynamic2() calls. In particular, pagesize and osreldate are
set up from the aux values.
Now, rtld avoids (two) sysctl calls in startup.
Tested by: marius (sparc64)
MFC after: 1 month
In particular, provide pagesize and pagesizes array, the canary value
for SSP use, number of host CPUs and osreldate.
Tested by: marius (sparc64)
MFC after: 1 month
is acted upon, or when a thread calls pthread_exit(), the thread first
disables cancellation by setting its cancelability state to
PTHREAD_CANCEL_DISABLE and its cancelability type to
PTHREAD_CANCEL_DEFERRED. The cancelability state remains set to
PTHREAD_CANCEL_DISABLE until the thread has terminated.
It has no effect if a cancellation cleanup handler or thread-specific
data destructor routine changes the cancelability state to
PTHREAD_CANCEL_ENABLE.
POSIX does not allow constructs like:
if cmd; then fi
{ }
Add a colon dummy command, except in a test that verifies that such empty
lists do not cause crashes when used as a function definition.
to uma_zone_set_max().
The UMA zone limit is not exactly set to the value supplied but
rounded up to completely fill the backing store increment (a page
normally). This can lead to surprising situations where the number
of elements allocated from UMA is higher than the supplied limit
value. The new get function reads back the effective value so that
the supplied limit value can be adjusted to the real limit.
Reviewed by: jeffr
MFC after: 1 week
All these functions and variables are local to this compilation unit, so
there is no reason why we shouldn't mark them static. This slightly
reduces the binary size.
