In a couple of cases a variable "stayopen" can be checked
unitialized. This is of no danger as the complementary
condition is false but prevent the access by switching
the checks.
CID: 1018729
CID: 1018732
This change introduces new target option "port", that assigns current target
to specified CTL port. On config application ctld(8) will apply LUN mapping
according to target configuration to specified port and bring the port up.
On shutdown cltd(8) will remove the mapping and put the port down.
This change allows to configure both iSCSI and FibreChannel targets in the
same configuration file in alike way.
Kernel side support was added earlier at r278037.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
[FastIsel][X86] Fix invalid register replacement for bool args
Summary:
Consider the following IR:
%3 = load i8* undef
%4 = trunc i8 %3 to i1
%5 = call %jl_value_t.0* @foo(..., i1 %4, ...)
ret %jl_value_t.0* %5
Bools (that are the result of direct truncs) are lowered as whatever
the argument to the trunc was and a "and 1", causing the part of the
MBB responsible for this argument to look something like this:
%vreg8<def,tied1> = AND8ri %vreg7<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg8,%vreg7
Later, when the load is lowered, it will insert
%vreg15<def> = MOV8rm %vreg14, 1, %noreg, 0, %noreg; mem:LD1[undef] GR8:%vreg15 GR64:%vreg14
but remember to (at the end of isel) replace vreg7 by vreg15. Now for
the bug. In fast isel lowering, we mistakenly mark vreg8 as the result
of the load instead of the trunc. This adds a fixup to have
vreg8 replaced by whatever the result of the load is as well, so
we end up with
%vreg15<def,tied1> = AND8ri %vreg15<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg15
which is an SSA violation and causes problems later down the road.
This fixes PR21557.
Test Plan: Test test case from PR21557 is added to the test suite.
Reviewers: ributzka
Reviewed By: ributzka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6245
This fixes a possible assertion failure when compiling toolbox.cxx from
LibreOffice 4.3.5.
Reported by: kwm
the ia_array field of struct ar9300_ini_array const, and removing the
const-dropping casts. No functional change.
Reviewed by: adrian
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1725
within [INT_MIN, INT_MAX] where the magnitude of the lower
and upper bounds are sufficiently large to span the range of
scalbn[fl].
While here, remove the GNU style bug in the function declarations.
Reviewed by: bde, pfg
This is required to prevent problems with nss modules that use libthr when
upgrading from releases prior to 10.1.
PR: 197366
Sponsored by: DARPA, AFRL
Differential Revision: D1790
Reviewed by: cperciva
MFC after: 3 days
target iSCSI offload. Add mechanism to query maximum receive data segment
size supported by chosen hardware offload module, and use it in ctld(8)
to determine the value to advertise to the other side.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
to a crash dump and kernel, respectively. The existing -m/-e flags are
still supported for backwards compatiblity but are no longer documented.
Requested by: np
MFC after: 2 weeks
Intel Multiprocessor Specification v1.4. The Intel SDM claims that
the INIT IPIs here are invalid, but other systems follow the MP
spec instead.
While here, fix the IPI wait routine to accept a timeout in microseconds
instead of a raw spin count, and don't spin forever during AP startup.
Instead, panic if a STARTUP IPI is not delivered after 20 us.
PR: 196542
Differential Revision: https://reviews.freebsd.org/D1719
MFC after: 2 weeks
This change allows multiple "portal-group" options to be specified per
target. Each of them may include new optional auth-group name parameter
to override per-target auth parameters for specific portal group.
Kernel side support was added earlier at r278161.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
particular, updates to the watchdog should no longer sleep.
- Add a new IPMI_IO_LOCK for low-level I/O access. Use this for
kcs_polled_request() and smic_polled_request().
- Add a new backend callback "ipmi_driver_request" to handle a driver
request. The new callback performs the request sychronously for KCS
and SMIC. SSIF still defers the work to the worker thread since the
worker thread sleeps during request processing anyway.
- Allocate driver requests on the stack rather than using malloc().
Differential Revision: https://reviews.freebsd.org/D1723
Tested by: scottl
MFC after: 2 weeks
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.
Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes
continues to work with newer kernel.
Other ctladm(8) "*list" subcommands seem to already handle it in
a reasonable way.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This was a local addition to the original change from NetBSD.
Being this libc there is some chance for it to interfere with
user's cget*() functions usage. The memory leak was finely
plugged by r278300.
Pointed out by: ache
b_destroying member was left uninitialized, which caused spurious
EBUSY.
PR: 197365
Noted by: Florent Guiliani <fguiliani@verisign.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
I discovered this while working on llvm/lld and realized export-dynamic
only supported --. Although upstream will eventually grow to support
both - and --, switch this in our build system, because GNU ld supports
both modes, and because there's some hope lld will become the default linker
for FreeBSD in the future.
Discussed with: emaste, rdivacky
a dependency. This ensures "ifconfig cxl<n> ..." does the right thing
even when it's run with no driver loaded.
if_cxl.ko is the tiniest module in /boot/kernel.
MFC after: 2 weeks
flag value is already exposed via dv_flags, just not the meaning of the
flags themselves. Use these constants to annotate devices that are
disabled or suspended in devinfo output.
usr.sbin/syslogd/syslogd.c:1023:10: error: address of array 'f->f_prevline' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
f->f_prevline && !strcmp(msg, f->f_prevline) &&
~~~^~~~~~~~~~
usr.sbin/syslogd/syslogd.c:1178:16: error: address of array 'f->f_prevline' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
} else if (f->f_prevline) {
~~ ~~~^~~~~~~~~~
In both cases, the f_prevline field of struct filed is a char array, so
it can never be null. Remove the checks.
Reviewed by: jilles
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1716
This was a discrepancy between ^/projects/building-blocks and ^/head that I
didn't resolve before committing the change to ^/head
Pointyhat to: me
Reported by: jhb
MFC after: 20 days
X-MFC with: r278249
Sponsored by: EMC / Isilon Storage Division
