The description is FreeBSD-specific and was added in r266497
to fix PR189865.
PR: 220825
Submitted by: Fabian Keil
Obtained from: ElectroBSD
MFC after: 1 week
I overlooked the fact that vdev_op_io_done hook is called even if the
actual I/O is skipped, for example, in the case of a missing vdev.
Arguably, this could be considered an issue in the zio pipeline engine,
but for now I am adding defensive code to check for io_bp being NULL
along with assertions that that happens only when it can be really
expected.
PR: 220691
Reported by: peter, cy
Tested by: cy
MFC after: 1 week
X-MFC with: r320156, r320452
ZPL_VERSION is unsigned long long, not an int. With this change, a zpool can be
created on a 32-bit system (tested on powerpcspe) and mounted correctly.
Reviewed by: allanjude
The implementation of ZFS refcount_t uses the emulated illumos mutex
(the sx lock) and the waiting memory allocation when ZFS_DEBUG is
enabled. This makes refcount_t unsuitable for use in GEOM g_up
thread where sleeping is prohibited.
When importing the ABD change I modified vdev_geom using illumos
vdev_disk as an example. As a result, I added a call to abd_return_buf
in vdev_geom_io_intr. The latter is called on g_up thread while the
former uses refcount_t.
This change fixes the problem by deferring the abd_return_buf call to
the previously unused vdev_geom_io_done that is called on a ZFS zio
taskqueue thread where sleeping is allowed.
A side bonus of this change is that now a vdev zio has a pointer
to its corresponding bio while the zio is active.
Reported by: Shawn Webb <shawn.webb@hardenedbsd.org>
Tested by: Shawn Webb <shawn.webb@hardenedbsd.org>
MFC after: 1 week
X-MFC with: r320156
3306 zdb should be able to issue reads in parallel
illumos/illumos-gate/31d7e8fa33fae995f558673adb22641b5aa8b6e1
https://www.illumos.org/issues/3306
The upstream change was made before we started to import upstream commits
individually. It was imported into the illumos vendor area as r242733.
That commit was MFV-ed in r260138, but as the commit message says
vdev_file.c was left intact.
This commit actually implements the parallel I/O for vdev_file using a
taskqueue with multiple thread. This implementation does not depend on
the illumos or FreeBSD bio interface at all, but uses zio_t to pass
around all the relevent data. So, the code looks a bit different from
the upstream.
This commit also incorporates ZoL commit
zfsonlinux/zfs/bc25c9325b0e5ced897b9820dad239539d561ec9 that fixed
https://github.com/zfsonlinux/zfs/issues/2270
We need to use a dedicated taskqueue for exactly the same reason as ZoL
as we do not implement TASKQ_DYNAMIC.
Obtained from: illumos, ZFS on Linux
MFC after: 2 weeks
FreeBSD note: the actual change has been in FreeBSD since r297848. This
commit accounts for integration of that change with subsequent changes,
especially r320156 (MFV of r318946) and r314274.
illumos/illumos-gate@403a8da73c403a8da73chttps://www.illumos.org/issues/5220
There are disk devices that have logical sector size larger than 512B, for
example 4KB. That is, their physical sector size is larger than 512B and they
do not provide emulation for 512B sector sizes. For such devices both a data
offset and a data size must be properly aligned. L2ARC should arrange that
because it uses physical I/O.
zio_vdev_io_start() performs a necessary transformation if io_size is not
aligned to vdev_ashift, but that is done only for logical I/O. Something
similar should be done in L2ARC code.
* a temporary write buffer should be allocated if the original buffer is
not going to be compressed and its size is not aligned
* size of a temporary compression buffer should be ashift aligned
* for the reads, if a size of a target buffer is not sufficiently large and
it is not aligned then a temporary read buffer should be allocated
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 3 weeks
illumos/illumos-gate@0255edcc850255edcc85https://www.illumos.org/issues/8056
The send size estimate for a zvol can be too low, if the size of the record
headers (dmu_replay_record_t's) is a significant portion of the size.
This is typically the case when the data is highly compressible, especially
with embedded blocks.
The problem is that dmu_adjust_send_estimate_for_indirects() assumes that
blocks are the size of the "recordsize" property (128KB).
However, for zvols, the blocks are the size of the "volblocksize" property
(8KB). Therefore, we estimate that there will be 16x less record headers than
there really will be.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
MFC after: 3 weeks
FreeBSD note: this commit removes small differences between what mav
committed to FreeBSD in r308782 and what ended up committed to illumos
after addressing all review comments.
illumos/illumos-gate@c5ee46810fc5ee46810fhttps://www.illumos.org/issues/7578
After some ZIL changes 6 years ago zil_slog_limit got partially broken
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.
Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG. Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.
Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size. In some
cases efficiency stopped to almost as low as 50%. In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas. This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently. Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.
While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Alexander Motin <mav@FreeBSD.org>
MFC after: 3 weeks
All of the problems were related to the FreeBSD-only features.
One was caused by a mismerge in the zfsbootcfg support code.
All others were in the TRIM support code.
MFC after: 1 week
X-MFC with: r320156
All of the problems were related to the FreeBSD-only features.
One was caused by a mismerge in the zfsbootcfg support code.
All others were in the TRIM support code.
Reported by: ken,
O. Hartmann <ohartmann@walstatt.org>,
Trond Endrestøl <Trond.Endrestol@fagskolen.gjovik.no>
MFC after: 1 week
X-MFC with: r320156
illumos/illumos-gate@770499e185770499e185https://www.illumos.org/issues/8021
The ARC buf data project (known simply as "ABD" since its genesis in the ZoL
community) changes the way the ARC allocates `b_pdata` memory from using linear
`void *` buffers to using scatter/gather lists of fixed-size 1KB chunks. This
improves ZFS's performance by helping to defragment the address space occupied
by the ARC, in particular for cases where compressed ARC is enabled. It could
also ease future work to allocate pages directly from `segkpm` for minimal-
overhead memory allocations, bypassing the `kmem` subsystem.
This is essentially the same change as the one which recently landed in ZFS on
Linux, although they made some platform-specific changes while adapting this
work to their codebase:
1. Implemented the equivalent of the `segkpm` suggestion for future work
mentioned above to bypass issues that they've had with the Linux kernel memory
allocator.
2. Changed the internal representation of the ABD's scatter/gather list so it
could be used to pass I/O directly into Linux block device drivers. (This
feature is not available in the illumos block device interface yet.)
FreeBSD notes:
- the actual (default) chunk size is 4KB (despite the text above saying 1KB)
- we can try to reimplement ABDs, so that they are not permanently
mapped into the KVA unless explicitly requested, especially on
platforms with scarce KVA
- we can try to use unmapped I/O and avoid intermediate allocation of a
linear, virtual memory mapped buffer
- we can try to avoid extra data copying by referring to chunks / pages
in the original ABD
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Dan Kimmel <dan.kimmel@delphix.com>
MFC after: 3 weeks
I think that the change is still good, but reconciling it with a planned
merge of the ARC buf data scatter-ization is a bit more tedious
than I can handle.
MFC after: 17 days
illumos/illumos-gate@2889ec41c02889ec41c0https://www.illumos.org/issues/8311
Description:
There was a misunderstanding about the enforcement details of the "Read-only"
flag introduced for SMB/CIFS compatibility, way back in 2007 in the Sun PSARC
2007/315 case.
The original authors thought enforcement of the READONLY flag should work
similarly as the IMMUTABLE flag. Unfortunately, that enforcement is
incompatible with the expectations of Windows applications using this feature
through the SMB service. Applications assume (and the MS File System Algorithms
MS-FSA confirms they should) that an SMB client can:
(a) Open an SMB handle on a file with read/write access,
(b) Set the DOS attributes to include the READONLY flag,
(c) continue to have write access via that handle.
This access model is essentially the same as a Unix/POSIX application that
creates a file (with read/write access), uses fchmod() to change the file mode
to something not granting write access (i.e. 0444), and then continues to write
that file using the open handle it got before the mode change.
Currently, the SMB server works-around this problem in a way that will become
difficult to maintain as we implement support for SMB3 persistent handles, so
SMB depends on this fix.
I've written a test program that can be used to demonstrate this problem, and
added it to zfs-tests (tests/functional/acl/cifs/cifs_attr_004_pos).
It currently fails, but will pass when this problem fixed.
Steps to Reproduce:
Run the test program on a ZFS file system.
Expected Results:
Pass
Actual Results:
Fail.
Reviewed by: Sanjay Nadkarni <sanjay.nadkarni@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Prakash Surya <prakash.surya@delphix.com>
Author: Gordon Ross <gwr@nexenta.com>
MFC after: 2 weeks
illumos/illumos-gate@4585130b254585130b25https://www.illumos.org/issues/5428
Most of the upstream change is not applicable to FreeBSD.
Only the renaming of strtonum to zfs_strtonum is relevant to us.
And we already had it partially done.
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
MFC after: 1 week
illumos/illumos-gate@a4b8c9aa65a4b8c9aa65https://www.illumos.org/issues/8264
Oddly there is a lzc_clone function, but no lzc_promote function.
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@kebe.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Author: Andrew Stormont <astormont@racktopsystems.com>
MFC after: 1 week
Close a potential race in reading the CPU dtrace flags, where a thread can
start on one CPU, and partway through retrieving the flags be swapped out,
while another thread traps and sets the CPU_DTRACE_NOFAULT. This could
cause the first thread to return without handling the fault.
Discussed with: markj@
illumos/illumos-gate@dbfd9f9300dbfd9f9300https://www.illumos.org/issues/8156
dbuf_evict_notify() holds the dbuf_evict_lock while checking if it should do
the eviction itself (because the evict thread is not able to keep up).
This can result in massive lock contention.
It isn't necessary to hold the lock, because if we make the wrong choice
occasionally, nothing bad will happen.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 1 week
illumos/illumos-gate@5b062782535b06278253https://www.illumos.org/issues/8005
RAID-Z requires that space be allocated in multiples of P+1 sectors,
because this is the minimum size block that can have the required amount
of parity. Thus blocks on RAIDZ1 must be allocated in a multiple of 2
sectors; on RAIDZ2 multiple of 3; and on RAIDZ3 multiple of 4. A sector
is a unit of 2^ashift bytes, typically 512B or 4KB.
To satisfy this constraint, the allocation size is rounded up to the
proper multiple, resulting in up to 3 "pad sectors" at the end of some
blocks. The contents of these pad sectors are not used, so we do not
need to read or write these sectors. However, some storage hardware
performs much worse (around 1/2 as fast) on mostly-contiguous writes
when there are small gaps of non-overwritten data between the writes.
Therefore, ZFS creates "optional" zio's when writing RAID-Z blocks that
include pad sectors. If writing a pad sector will fill the gap between
two (required) writes, we will issue the optional zio, thus doubling
performance. The gap-filling performance improvement was introduced in
July 2009.
Writing the optional zio is done by the io aggregation code in
vdev_queue.c. The problem is that it is also subject to the limit on
the size of aggregate writes, zfs_vdev_aggregation_limit, which is by
default 128KB. For a given block, if the amount of data plus padding
written to a leaf device exceeds zfs_vdev_aggregation_limit, the
optional zio will not be written, resulting in a ~2x performance
degradation.
The problem occurs only for certain values of ashift, compressed block
size, and RAID-Z configuration (number of parity and data disks). It
cannot occur with the default recordsize=128KB. If compression is
enabled, all configurations with recordsize=1MB or larger will be
impacted to some degree.
The problem notably occurs with recordsize=1MB, compression=off, with 10
disks in a RAIDZ2 or RAIDZ3 group (with 512B or 4KB sectors). Therefore
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 10 days
illumos/illumos-gate@adaec86ad2adaec86ad2https://www.illumos.org/issues/8155
When writing pre-compressed buffers, arc_write() requires that the compression
algorithm used to compress the buffer matches the compression algorithm
requested by the zio_prop_t, which is set by dmu_write_policy().
This makes dmu_write_policy() and its callers a bit more complicated.
We can simplify this by making arc_write() trust the caller to supply the type
of pre-compressed buffer that it wants to write, and override the compression
setting in the zio_prop_t.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 10 days
When a parent directory lookup is done at the root of a snapshot mounted
under .zfs/snapshot directory, we need to look up that directory in
the parent filesystem. We achieve that by doing a VOP_LOOKUP operation
on a .zfs vnode with "snapshot" as a target name. But previously we
also passed ISDOTDOT flag to the lookup and, because of that, the lookup
actually returned the parent of the .zfs vnode, that is, a root vnode of
the parent filesystem.
Reported by: lev
Tested by: lev
MFC after: 3 days
Since ino64 expanded dev_t to 64bit, make VOP_GETATTR(9) provide all
bits of mnt_stat.f_fsid as va_fsid for vnodes on filesystems which use
f_fsid. In particular, NFSv3 and sometimes NFSv4, and ZFS use this
method or reporting st_dev by stat(2).
Provide a new helper vn_fsid() to avoid duplicating code to copy
f_fsid to va_fsid.
Note that the change is mostly cosmetic. Its motivation is to avoid
sign-extension of f_fsid[0] into 64bit dev_t value which happens after
dev_t becomes 64bit..
Reviewed by: avg(zfs), rmacklem (nfs) (both for previous version)
Sponsored by: The FreeBSD Foundation
illumos/illumos-gate@bc83969fdbbc83969fdbhttps://www.illumos.org/issues/8265
Reserve bit 23 in the zfs send stream flags for the large
dnode feature which has been implemented for Linux.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Brian Behlendorf <behlendorf1@llnl.gov>
MFC after: 1 week
illumos/illumos-gate@2d2f193a212d2f193a21https://www.illumos.org/issues/8166
If we do a scrub while a leaf device is offline (via "zpool offline"),
we will inadvertently clear the DTL (dirty time log) of the offline
device, even though it is still damaged. When the device comes back
online, we will incompletely resilver it, thinking that the scrub
repaired blocks written before the scrub was started. The incomplete
resilver can lead to data loss if there is a subsequent failure of a
different leaf device.
The fix is to never clear the DTL of offline devices. Note that if a
device is onlined while a scrub is in progress, the scrub will be
restarted.
The problem can be worked around by running "zpool scrub" after
"zpool online".
See also https://github.com/zfsonlinux/zfs/issues/5806
Reviewed by: George Wilson george.wilson@delphix.com
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@40713f2b2440713f2b24https://www.illumos.org/issues/8070
Add some ZFS comments left by various developers at different times
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Alan Somers <asomers@gmail.com>
MFC after: 1 week
illumos/illumos-gate@b7b2590dd9b7b2590dd9https://www.illumos.org/issues/8063
A standard practice in ZFS is to keep track of "per-txg" state. Any of
the 3 active TXG's (open, quiescing, syncing) can have different values
for this state. We should assert that we do not attempt to modify other
(inactive) TXG's.
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@5f368aef865f368aef86https://www.illumos.org/issues/7786
Currently, vdev_online() will only post sysevent if previous state was
"offline". It should also post the event when the state changes from "removed"
or "faulted" to "healthy" or "degraded".
This will fix the following scenario:
- pull disk from slot A
- check that hotspare has taken its place (if available)
- insert disk into slot B
- check that hotspare moved back to "avail" state (if spare was used)
The problem here is that we don't get any ESC_ZFS_VDEV_* notification and fail
to update the vdev FRU.
Reviewed by: Matthew Ahrens mahrens@delphix.com
Reviewed by: George Wilson george.wilson@delphix.com
Approved by: Albert Lee <trisk@forkgnu.org>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
MFC after: 1 week
illumos/illumos-gate@def4fac588def4fac588https://www.illumos.org/issues/8025
dbuf_read() creates a zio_root() to track and wait for all the zio's
that may happen as part of this call. However, if the blkptr_t for
this buffer is NULL or a hole, we will not create any more zio's, so
this zio_root() is unnecessary. This is always the case when calling
dbuf_read() on a bonus buffer, because it has no blkptr (it's part of
the containing dnode). For workloads that read a lot of bonus buffers
(e.g. file creation and removal), creating and destroying these
unnecessary zio's can decrease performance by around 3%.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
All the differences in calculations are kept.
A comment about arc_max being 1/2 of all memory is fixed to reflect the
actual code that uses 5/8 as a factor.
MFC after: 1 week
illumos/illumos-gate@0c94e1af670c94e1af67https://www.illumos.org/issues/7256
error = dmu_sync(zio, lr->lr_common.lrc_txg,
zfs_get_done, zgd);
ASSERT(error || lr->lr_length <= zp->z_blksz);
It's possible, although extremely rare, that the zfs_get_done() callback is
executed before dmu_sync() returns.
In that case the znode's range lock is dropped and the znode is unreferenced.
Thus, the assertion can access some invalid or wrong data via the zp pointer.
size variable caches the correct value of z_blksz and can be safely used here.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 1 week
illumos/illumos-gate@7f0bdb42577f0bdb4257https://www.illumos.org/issues/8061
sa_find_idx_tab() is declared as taking and returning "void *" parameters.
These can be declared to be the specific types.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 1 week
illumos/illumos-gate@b127fe3c05b127fe3c05https://www.illumos.org/issues/6101
lzc_create(), or more correctly, zfs_ioc_create() does not reject an attempt to
create a filesystem as a child of a volume, instead it proceeds to a crash.
A crash stack obtained on FreeBSD:
page fault while in kernel mode
zap_leaf_lookup()
fzap_lookup()
zap_lookup_norm()
zap_lookup()
zfs_get_zplprop()
zfs_fill_zplprops_impl()
zfs_ioc_create()
zfsdev_ioctl()
devfs_ioctl_f()
kern_ioctl()
sys_ioctl()
This crash happened with a kernel without debugging assertions.
The immediate cause of crash appears to an attempt to interpret a zvol object
as a zap object.
For filesystems:
#define MASTER_NODE_OBJ 1
For zvols:
#define ZVOL_OBJ 1ULL
#define ZVOL_ZAP_OBJ 2ULL
So, I see two problems here:
1. an attempt to create a filesystem under a zvol should be rejected as
early as possible, maybe in zfs_fill_zplprops()
2. maybe zap_lookup / zap_lockdir should reject objects that are not of one
of the zap object types
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@6b036259816b03625981https://www.illumos.org/issues/8026
zfs_throttle_delay and zfs_throttle_resolution became disused since the new
write throttling mechanism was introduced.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
illumos/illumos-gate@313ae1e182313ae1e182https://www.illumos.org/issues/8027
dsl_pool_dirty_delta() should not wake up waiters when dp->dp_dirty_total ==
zfs_dirty_data_max, because they wait for dp_dirty_total to fall strictly below
the threshold.
It's probably very rare for that condition to occur, but it's better to have
more accurate code.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
illumos/illumos-gate@94c2d0eb2294c2d0eb22https://www.illumos.org/issues/7968
spa_sync() iterates over all the dirty dnodes and processes each of them by
calling dnode_sync(). If there are many dirty dnodes (e.g. because we created
or removed a lot of files), the single thread of spa_sync() calling
dnode_sync() can become a bottleneck. Additionally, if many dnodes are dirtied
concurrently in open context (e.g. due to concurrent file creation), the
os_lock will experience lock contention via dnode_setdirty().
The solution is to track dirty dnodes on a multilist_t, and for spa_sync() to
use separate threads to process each of the sublists in the multilist.
On the concurrent file creation microbenchmark, the performance improvement
from dnode_setdirty() is up to 7%. Additionally, the wall clock time spent in
spa_sync() is reduced to 15%-40% of the single-threaded case. In terms of cost/
reward, once the other bottlenecks are addressed, fixing this bug will provide
a medium-large performance gain and require a medium amount of effort to
implement.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@10fbdecb0510fbdecb05https://www.illumos.org/issues/7970
The global tunable zfs_arc_num_sublists_per_state is used by the ARC and
the dbuf cache, and other users are planned. We should change this
tunable to be common to all multilists.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@b0c42cd470b0c42cd470https://www.illumos.org/issues/7801
Add *_by_dnode() routines for accessing objects given their
dnode_t *, this is more efficient than accessing the object by
(objset_t *, uint64_t object). This change converts some but
not all of the existing consumers. As performance-sensitive
code paths are discovered they should be converted to use
these routines.
Ported from: 0eef1bde31
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: bzzz77 <bzzz.tomas@gmail.com>
MFC after: 24 days
illumos/illumos-gate@a3905a4592a3905a4592https://www.illumos.org/issues/7869
The issue fixed by this patch is a race condition in the deadlist code.
A thread executing an administrative command that uses
`dsl_deadlist_space_range()` holds the lock of the whole `deadlist_t` to
protect the access of all its entries that the deadlist contains in an
avl tree.
Sync threads trying to insert a new entry in the deadlist
(through `dsl_deadlist_insert()` -> `dle_enqueue()`) do not hold the
deadlist lock at that moment. If the `dle_bpobj` is the empty bpobj (our
sentinel value), we close and reopen it. Between these two operations,
it is possible for the `dsl_deadlist_space_range()` thread to dereference
that bpobj which is `NULL` during that window.
Threads should hold the a deadlist's `dl_lock` when they manipulate its
internal data so scenarios like the one above are avoided. In addition,
threads should also hold the bpobj lock whenever they are allocating the
subobj list of a bpobj, and not just when they actually insert the subobj
to the list. This way we can avoid potential memory leaks.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@61e255ce7261e255ce72https://www.illumos.org/issues/7793
Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.
The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).
This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().
The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.
We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@1c17160ac51c17160ac5https://www.illumos.org/issues/1300
FreeBSD note: recent FreeBSD was not affected by the issue fixed as the
name cache is completely bypassed when normalization is enabled.
The change is imported for the sake of ZAP infrastructure modifications.
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Kevin Crowe <kevin.crowe@nexenta.com>
MFC after: 3 weeks
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
The idle thread may process callouts while reloading the timer in
cpu_activeclock(). In this case, provide a representative value, &cpu_idle,
instead of 0 for args[0] so that the active thread can be more easily
identified from the probe.
This addresses intermittent failures of the profile-n/tst.argtest.d test.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10651
vdev_geom.c currently uses the g_consumer's private field to point to a
vdev_t. That way, a GEOM event can cause a change to a ZFS vdev. For
example, when you remove a disk, the vdev's status will change to REMOVED.
However, vdev_geom will sometimes attach multiple vdevs to the same GEOM
consumer. If this happens, then geom events will only be propagated to one
of the vdevs.
Fix this by storing a linked list of vdevs in g_consumer's private field.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
* g_consumer.private now stores a linked list of vdev pointers associated
with the consumer instead of just a single vdev pointer.
* Change vdev_geom_set_physpath's signature to more closely match
vdev_geom_set_rotation_rate
* Don't bother calling g_access in vdev_geom_set_physpath. It's guaranteed
that we've already accessed the consumer by the time we get here.
* Don't call vdev_geom_set_physpath in vdev_geom_attach. Instead, call it
in vdev_geom_open, after we know that the open has succeeded.
PR: 218634
Reviewed by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D10391
The current method only sort of works, and usually doesn't work reliably.
Also, on Book-E the return address from DEBUG exceptions is not the sentinel
addresses, so it won't exit the loop correctly.
Fix this by better handling trap frames during unwinding, and using the
common trap handler for debug traps, as the code in that segment is
identical between the two.
MFC after: 1 week
r314370 changed EXC_DTRACE to a different instruction, but neglected to
make the same change to fbt, so dtrace didn't actually pick it up,
resulting in entering KDB instead of trapping for dtrace.
MFC after: 1 week
7740 fix for 6513 only works in hole punching case, not truncation
illumos/illumos-gate@7de35a3ed07de35a3ed0https://www.illumos.org/issues/7740
The problem is that dbuf_findbp will return ENOENT if the block it's
trying to find is beyond the end of the file. If that happens, we assume
there is no birth time, and so we lose that information when we write
out new blkptrs. We should teach dbuf_findbp to look for things that are
beyond the current end, but not beyond the absolute end of the file.
To verify, create a large file, truncate it to a short length, and then
write beyond the end. Check with zdb to make sure that there are no
holes with birth time zero (will appear as gaps).
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Paul Dagnelie <pcd@delphix.com>
7743 per-vdev-zaps have no initialize path on upgrade
illumos/illumos-gate@555da5111b555da5111bhttps://www.illumos.org/issues/7743
When loading a pool that had been created before the existance of
per-vdev zaps, on a system that knows about per-vdev zaps, the
per-vdev zaps will not be allocated and initialized.
This appears to be because the logic that would have done so, in
spa_sync_config_object(), is not reached under normal operation. It is
only reached if spa_config_dirty_list is non-empty.
The fix is to add another `AVZ_ACTION_` enum that will allow this code
to be reached when we detect that we're loading an old pool, even when
there are no dirty configs.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
7613 ms_freetree[4] is only used in syncing context
illumos/illumos-gate@5f145778015f14577801https://www.illumos.org/issues/7613
metaslab_t:ms_freetree[TXG_SIZE] is only used in syncing context. We should
replace it with two trees: the freeing tree (ranges that we are freeing this
syncing txg) and the freed tree (ranges which have been freed this txg).
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
7586 remove #ifdef __lint hack from dmu.h
illumos/illumos-gate@4ba5b961634ba5b96163https://www.illumos.org/issues/7586
The #ifdef __lint in dmu.h is ugly, and it would be nice not to duplicate it if
we add other inline functions into header files in ZFS, especially since it is
difficult to make any other solution work across all compilation targets. We
should switch to disabling the lint flags that are failing instead.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
7580 ztest failure in dbuf_read_impl
illumos/illumos-gate@1a01181fdc1a01181fdchttps://www.illumos.org/issues/7580
We need to prevent any reader whenever we're about the zero out all the
blkptrs. To do this we need to grab the dn_struct_rwlock as writer in
dbuf_write_children_ready and free_children just prior to calling bzero.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: George Wilson <george.wilson@delphix.com>
7606 dmu_objset_find_dp() takes a long time while importing pool
illumos/illumos-gate@7588687e6b7588687e6bhttps://www.illumos.org/issues/7606
When importing a pool with a large number of filesystems within the same
parent filesystem, we see that dmu_objset_find_dp() takes a long time.
It is called from 3 places: spa_check_logs(), spa_ld_claim_log_blocks(),
and spa_load_verify().
There are several ways to improve performance here:
1. We don't really need to do spa_check_logs() or
spa_ld_claim_log_blocks() if the pool was closed cleanly.
2. spa_load_verify() uses dmu_objset_find_dp() to check that no
datasets have too long of names.
3. dmu_objset_find_dp() is slow because it's doing
zap_value_search() (which is O(N sibling datasets)) to determine
the name of each dsl_dir when it's opened. In this case we
actually know the name when we are opening it, so we can provide
it and avoid the lookup.
This change implements fix#3 from the above list; i.e. make
dmu_objset_find_dp() provide the name of the dataset so that we don't
have to search for it.
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <prashksp@gmail.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
7252 7628 compressed zfs send / receive
illumos/illumos-gate@5602294fda5602294fdahttps://www.illumos.org/issues/7252
This feature includes code to allow a system with compressed ARC enabled to
send data in its compressed form straight out of the ARC, and receive data in
its compressed form directly into the ARC.
https://www.illumos.org/issues/7628
We should have longer, more readable versions of the ZFS send / recv options.
7628 create long versions of ZFS send / receive options
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: David Quigley <dpquigl@davequigley.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Dan Kimmel <dan.kimmel@delphix.com>
7386 zfs get does not work properly with bookmarks
illumos/illumos-gate@edb901aab9edb901aab9https://www.illumos.org/issues/7386
The zfs get command does not work with the bookmark parameter while it works
properly with both filesystem and snapshot:
# zfs get -t all -r creation rpool/test
NAME PROPERTY VALUE SOURCE
rpool/test creation Fri Sep 16 15:00 2016 -
rpool/test@snap creation Fri Sep 16 15:00 2016 -
rpool/test#bkmark creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test@snap
NAME PROPERTY VALUE SOURCE
rpool/test@snap creation Fri Sep 16 15:00 2016 -
# zfs get -t all -r creation rpool/test#bkmark
cannot open 'rpool/test#bkmark': invalid dataset name
#
The zfs get command should be modified to work properly with bookmarks too.
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
7490 real checksum errors are silenced when zinject is on
illumos/illumos-gate@6cedfc397d6cedfc397dhttps://www.illumos.org/issues/7490
When zinject is on, error codes from zfs_checksum_error() can be overwritten
due to an incorrect and overly-complex if condition.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
7448 ZFS doesn't notice when disk vdevs have no write cache
illumos/illumos-gate@295438ba32295438ba32https://www.illumos.org/issues/7448
I built a SmartOS image with all the NVMe commits including 7372
(support NVMe volatile write cache) and repeated my dd testing:
> #!/bin/bash
> for i in `seq 1 1000`; do
> dd if=/dev/zero of=file00 bs=1M count=102400 oflag=sync &
> dd if=/dev/zero of=file01 bs=1M count=102400 oflag=sync &
> wait
> rm file00 file01
> done
>
Previously each dd command took ~145 seconds to finish, now it takes
~400 seconds.
Eventually I figured out it is 7372 that causes unnecessary
nvme_bd_sync() executions which wasted CPU cycles.
If a NVMe device doesn't support a write cache, the nvme_bd_sync function will
return ENOTSUP to indicate this to upper layers.
It seems this returned value is ignored by ZFS, and as such this bug is not
really specific to NVMe. In vdev_disk_io_start() ZFS sends the flush to the
disk driver (blkdev) with a callback to vdev_disk_ioctl_done(). As nvme filled
in the bd_sync_cache function pointer, blkdev will not return ENOTSUP, as the
nvme driver in general does support cache flush. Instead it will issue an
asynchronous flush to nvme and immediately return 0, and hence ZFS will not set
vdev_nowritecache here. The nvme driver will at some point process the cache
flush command, and if there is no write cache on the device it will return
ENOTSUP, which will be delivered to the vdev_disk_ioctl_done() callback. This
function will not check the error code and not set nowritecache.
The right place to check the error code from the cache flush is in
zio_vdev_io_assess(). This would catch both cases, synchronous and asynchronous
cache flushes. This would also be independent of the implementation detail that
some drivers can return ENOTSUP immediately.
Reviewed by: Dan Fields <dan.fields@nexenta.com>
Reviewed by: Alek Pinchuk <alek.pinchuk@nexenta.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Obtained from: Illumos
7430 Backfill metadnode more intelligently
illumos/illumos-gate@af346df588af346df588https://www.illumos.org/issues/7430
Description and patch from brought over from the following ZoL commit: https://
github.com/zfsonlinux/zfs/commit/68cbd56e182ab949f58d004778d463aeb3f595c6
Only attempt to backfill lower metadnode object numbers if at least
4096 objects have been freed since the last rescan, and at most once
per transaction group. This avoids a pathology in dmu_object_alloc()
that caused O(N^2) behavior for create-heavy workloads and
substantially improves object creation rates. As summarized by
@mahrens in #4636:
"Normally, the object allocator simply checks to see if the next
object is available. The slow calls happened when dmu_object_alloc()
checks to see if it can backfill lower object numbers. This happens
every time we move on to a new L1 indirect block (i.e. every 32 *
128 = 4096 objects). When re-checking lower object numbers, we use
the on-disk fill count (blkptr_t:blk_fill) to quickly skip over
indirect blocks that don?t have enough free dnodes (defined as an L2
with at least 393,216 of 524,288 dnodes free). Therefore, we may
find that a block of dnodes has a low (or zero) fill count, and yet
we can?t allocate any of its dnodes, because they've been allocated
in memory but not yet written to disk. In this case we have to hold
each of the dnodes and then notice that it has been allocated in
memory.
The end result is that allocating N objects in the same TXG can
require CPU usage proportional to N^2."
Add a tunable dmu_rescan_dnode_threshold to define the number of
objects that must be freed before a rescan is performed. Don't bother
to export this as a module option because testing doesn't show a
compelling reason to change it. The vast majority of the performance
gain comes from limit the rescan to at most once per TXG.
Reviewed by: Alek Pinchuk <alek@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Ned Bass <bass6@llnl.gov>
Obtained from: Illumos
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
While the former name is easier to read, the "_flags" suffix has a special
meaning for loader(8) and, thus, it was impossible to set the knob via
loader.conf(5). The loader interpreted the setting as flags that should
be passed to a kernel module named "vfs.zfs.debug".
Discussed with: smh
MFC after: 2 weeks
When opening a vdev whose path is unknown, vdev_geom must find a geom
provider with a label whose guids match the desired vdev. However, due to
partitioning, it is possible that two non-synonomous providers will share
some labels. For example, if the first partition starts at the beginning of
the drive, then ada0 and ada0p1 will share the first label. More troubling,
if the last partition runs to the end of the drive, then ada0p3 and ada0
will share the last label. If vdev_geom opens ada0 when it should've opened
ada0p3, then the pool won't be readable. If it opens ada0 when it should've
opened ada0p1, then it will corrupt some other partition when it writes the
3rd and 4th labels.
The easiest way to reproduce this problem is to install a mirrored root pool
with the default partition layout, then swap the positions of the two boot
drives and reboot. Whether the bug manifests depends on the order in which
geom lists its providers, which is arbitrary.
Fix this situation by modifying the search algorithm to prefer geom
providers that have all four labels intact. If no such provider exists, then
open whichever provider has the most.
Reviewed by: mav
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D10365
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
When a member of a RAIDZ has been replaced with a device smaller than the
original, then the top level vdev can report its expand size as 16.0E.
The reduced child asize causes the RAIDZ to have a vdev_asize lower than its
vdev_max_asize which then results in an underflow during the calculation of
the parents expand size.
Fix this by updating the vdev_asize if it shrinks, which is already
protected by a check against vdev_min_asize so should always be safe.
Also for RAIDZ vdevs, ensure that the sum of their child vdev_min_asize is
always greater than the parents vdev_min_size.
Fixes: https://www.illumos.org/issues/7885
MFC after: 2 weeks
Sponsored by: Multiplay
7603 xuio_stat_wbuf_* should be declared (void)
illumos/illumos-gate@99aa8b550599aa8b5505https://www.illumos.org/issues/7603
The funcs are declared k&r style, where the args are not specified:
void xuio_stat_wbuf_copied();
They should be declared to take no arguments:
void xuio_stat_wbuf_copied(void);
Need to change both .c and .h.
Author: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
illumos/illumos-gate@8363e80ae7https://github.com/illumos/illumos-gate/commit/8363e80ae72609660f6090766ca8c2c18https://www.illumos.org/issues/7303
This change introduces a new weighting algorithm to improve metaslab selection.
The new weighting algorithm relies on the SPACEMAP_HISTOGRAM feature. As a result,
the metaslab weight now encodes the type of weighting algorithm used
(size-based vs segment-based).
This also introduce a new allocation tracing facility and two new dcmds to help
debug allocation problems. Each zio now contains a zio_alloc_list_t structure
that is populated as the zio goes through the allocations stage. Here's an
example of how to use the tracing facility:
> c5ec000::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 ENOSPC ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 ENOSPC ztest.0a
1 0 400 1 x 8M 17b1a00 ztest.0a
> 1ff2400::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 200 0 NOT_ALLOCATABLE mirror-2
- 0 200 0 NOT_ALLOCATABLE mirror-0
1 0 200 1 x 4M 112ae00 mirror-1
- 1 200 0 NOT_ALLOCATABLE mirror-2
- 1 200 0 NOT_ALLOCATABLE mirror-0
1 1 200 1 x 4M 112b000 mirror-1
- 2 200 0 NOT_ALLOCATABLE mirror-2
If the metaslab is using segment-based weighting then the WEIGHT column will
display the number of segments available in the bucket where the allocation
attempt was made.
Author: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This way we can avoid blocking the whole queue in the low memory
situations. It's better to sacrifice some I/O performance by not doing
the aggregation than to add an indefinite wait for more memory.
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9999
As ZFS can request up to SPA_MAXBLOCKSIZE memory block e.g. during zfs recv,
update the threshold at which we start agressive reclamation to use
SPA_MAXBLOCKSIZE (16M) instead of the lower zfs_max_recordsize which
defaults to 1M.
PR: 194513
Reviewed by: avg, mav
MFC after: 1 month
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D10012
illumos/illumos-gate@6de76ce2a96de76ce2a9https://www.illumos.org/issues/7867
It seems that in the case where arc_hdr_free_pdata() sees HDR_L2_WRITING() we
would fail to update the ARC space statistics.
In the normal case those statistics are updated in arc_free_data_buf(). But in
the arc_hdr_free_on_write() path we don't do that.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 10 days
illumos/illumos-gate@c5bde7273ec5bde7273ehttps://www.illumos.org/issues/7843
get_clones_stat() could be very slow if a snapshot has many (thousands) clones.
Clone names are added to an nvlist that's created with NV_UNIQUE_NAME.
So, each time a new name is appended to the list, the whole list is searched
linearly to see if that name is not already in the list. That results in the
quadratic complexity.
That should be easy to fix as we know in advance that we should not get any
duplicate names, so we can drop NV_UNIQUE_NAME when creating the list.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
Sponsored by: ClusterHQ
For short transactions overhead of context switch can be too large.
Skipping it gives significant latency reduction. For large ones,
including multiple ZIOs, latency is less critical, while throughput
there may become limited by checksumming speed of single CPU core.
To get best of both cases, execute last ZIO directly from calling
thread context to save latency, while all others (if there are any)
enqueue to taskqueues in traditional way.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
7570 tunable to allow zvol SCSI unmap to return on commit of txn to ZIL
illumos/illumos-gate@1c9272b8611c9272b861https://www.illumos.org/issues/7570
Based on the discovery that every unmap waits for the commit of the txn to the ZIL,
introducing a very high latency to unmap commands, this behavior was made into a
tunable zvol_unmap_sync_enabled and set to false. The net impact of this change is
that by default SCSI unmap commands will result in space being freed within the zvol
(today they are ignored and returned with good status). However, unlike the code
today, instead of 18+ms per unmap, they take about 30us.
With the testing done on NTFS against a Win2k12 target, the new behavior should work
seamlessly. Files on the zvol that have already been set with the zfree application
will continue to write 0's when deleted, and any new files created since zvol
creation will send unmap commands when deleted. This behavior exists today, but with
this change the unmap commands will be processed and result in reclaim of space.
Author: Stephen Blinick <stephen.blinick@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>
While there, make a change to not evict a first buffer outside the
requested eviciton range.
To do:
- give more consistent names to the size variables
- upstream to OpenZFS
PR: 216178
Reported by: lev
Tested by: lev
MFC after: 2 weeks
callout(9) prohibits callout functions from sleeping.
illumos mutexes are emulated using sx(9).
spa_deadman() calls vdev_deadman() and the latter acquires vq_lock.
As a result we can get a more confusing panic instead of a specific
panic or no panic:
sleepq_add: td 0xfffff80019669960 to sleep on wchan 0xfffff8001cff4d88 with sleeping prohibited
This change adds another level of indirection where the deadman
callout schedules spa_deadman() to be executed on taskqueue_thread.
While there, use callout_schedule(0 instead of callout_reset()
in spa_sync().
Discussed with: mav
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9762
6676 Race between unique_insert() and unique_remove() causes ZFS fsid change
illumos/illumos-gate@40510e8eba40510e8ebahttps://www.illumos.org/issues/6676
The fsid of zfs filesystems might change after reboot or remount. The problem seems to
be caused by a race between unique_insert() and unique_remove(). The unique_remove()
is called from dsl_dataset_evict() which is now an asynchronous thread. In a case the
dsl_dataset_evict() thread is very slow and calls unique_remove() too late we will end
up with changed fsid on zfs mount.
This problem is very likely caused by #5056.
Steps to Reproduce
Note: I'm able to reproduce this always on a single core (virtual) machine. On multicore
machines it is not so easy to reproduce.
# uname -a
SunOS openindiana 5.11 illumos-633aa80 i86pc i386 i86pc Solaris
# zfs create rpool/TEST
# FS=$(echo ::fsinfo | mdb -k | grep TEST | awk '{print $1}')
# echo $FS::print vfs_t vfs_fsid | mdb -k
vfs_fsid = {
vfs_fsid.val = [ 0x54d7028a, 0x70311508 ]
}
# zfs umount rpool/TEST
# zfs mount rpool/TEST
# FS=$(echo ::fsinfo | mdb -k | grep TEST | awk '{print $1}')
# echo $FS::print vfs_t vfs_fsid | mdb -k
vfs_fsid = {
vfs_fsid.val = [ 0xd9454e49, 0x6b36d08 ]
}
#
Impact
The persistent fsid (filesystem id) is essential for proper NFS functionality.
If the fsid of a filesystem changes on remount (or after reboot) the NFS
clients might not be able to automatically recover from such event and the
manual remount of the NFS filesystems on every NFS client might be needed.
Author: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Sanjay Nadkarni <sanjay.nadkarni@nexenta.com>
Reviewed by: Dan Vatca <dan.vatca@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
As the current zfs file system is providing symlink via system attributes, need
to update the code accordingly.
Note, as the zfsboot code does not free the memory at this time, the
object list will put some stress on the boot2 heap, eventually we should
address the issue.
Reviewed by: allanjude, smh
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9706
The difference of one was insignificant because zio_write_issue threads
ended up on the same run queues as other zio threads.
See sys/priority.h and sys/runq.h for more details.
Add a comment describing FreeBSD priority considerations and restore
the illumos variant of the code for comparison.
Obtained from: Panzura
MFC after: 2 weeks
Sponsored by: Panzura
The current code is written on top of GFS, a library with the generic
support for writing filesystems, which was ported from illumos.
Because of significant differences between illumos VFS and FreeBSD
VFS models, both the GFS and zfsctl code were heavily modified to
work on FreeBSD. Nonetheless, they still contain quite a few ugly
hacks and bugs.
This is a reimplementation of the zfsctl code where the VFS-specific
bits are written from scratch and only the code that interacts with
the rest of ZFS is reused.
Some highlights.
We use two types of nodes, static and on-demand. The static nodes
are used for permanent directories like .zfs, .zfs/snapshot, etc. The
on-demand nodes are used for ephemeral directories that act as snapshot
mount points.
Initially only static nodes are created. Their vnodes are instantiated
when they are looked up. The on-demand nodes and vnodes are instantiated
as needed and the nodes are destroyed as soon as the corresponding
vnodes are reclaimed.
We also try very hard to ensure that uncovered snapshot vnodes do not
linger. They are supposed to become inactive as soon as they are
uncovered and we try to recycle them immediately.
When a filesystem is unmounted all snapshots under .zfs are unmounted
first, then all vnodes are flushed and finally the static .zfs nodes
are destroyed.
There are some changes outside of zfsctl code too.
z_ctldir is never used directly (as it is an opaque pointer),
zfsctl_root() has to be used instead. The function returns a locked
vnode now, so it accepts a lock flags parameter. The function can
also fail now, e.g. during force unmounting, whereas previously it
was infallible.
zfsctl_root_lookup() is retired, instead of it VOP_LOOKUP() on the .zfs
vnode (obtained with zfsctl_root) is used.
Some ideas are picked from an independent work by will.
Reviewed by: asomers, smh
MFC after: 1 month
Relnotes: maybe
Differential Revision: https://reviews.freebsd.org/D7421
7504 kmem_reap hangs spa_sync and administrative tasks
illumos/illumos-gate@405a5a0f5chttps://github.com/illumos/illumos-gate/commit/405a5a0f5c3ab36cb76559467d1a62ba648bd80https://www.illumos.org/issues/7504
We see long spa_sync(). We are waiting to hold dp_config_rwlock for writer. Some
other thread holds dp_config_rwlock for reader, then calls arc_get_data_buf(),
which finds that arc_is_overflowing()==B_TRUE. So it waits (while holding
dp_config_rwlock for reader) for arc_reclaim_thread to signal arc_reclaim_waiters_cv.
Before signaling, arc_reclaim_thread does arc_kmem_reap_now(), which takes ~seconds.
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
dtrace_trap() consumes page and protection faults triggered by code running
in DTrace probe context. Such faults occur with interrupts disabled and are
detected using a per-CPU flag. Regular faults cause dtrace_trap() to be
called with interrupts enabled, and nothing was ensuring that the flag was
read from the correct CPU. This may result in dtrace_trap() consuming
unrelated page and protection faults when DTrace is enabled, causing the
fault handler to return without actually having handled the fault.
Diagnosed by: Ryan Libby <rlibby@gmail.com>
MFC after: 3 days
Sponsored by: Dell EMC Isilon
7500 Simplify dbuf_free_range by removing dn_unlisted_l0_blkid
illumos/illumos-gate@653af1b809653af1b809https://www.illumos.org/issues/7500
With the integration of:
commit 0f6d88aded0d165f5954688a9b13bac76c38da84
Author: Alex Reece <alex@delphix.com>
Date: Sat Jul 26 13:40:04 2014 -0800
4873 zvol unmap calls can take a very long time for larger datasets
the dnode's dn_bufs field was changed from a list to a tree. As a result,
the dn_unlisted_l0_blkid field is no longer necessary.
Author: Stephen Blinick <stephen.blinick@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vnops.c
* In zfs_freebsd_setattr, if the caller wants to set the birthtime,
set the bits that zfs_settattr expects
* In zfs_setattr, if XAT_CREATETIME is set, set xoa_createtime,
expected by zfs_xvattr_set. The two levels of indirection seem
excessive, but it minimizes diffs vs OpenZFS.
* In zfs_setattr, check for overflow of va_birthtime (from delphij)
* Remove red herring in zfs_getattr
sys/cddl/contrib/opensolaris/uts/common/sys/vnode.h
* Un-booby-trap some macros
New tests are under review at https://github.com/pjd/pjdfstest/pull/6
Reviewed by: avg
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9353
It is an ASCII encoding of a hexadecimal representation of the DOF file
used to enable anonymous tracing, so its length should always be even.
MFC after: 1 week
When recording probe site addresses in the output DOF file, dtrace -G
needs to emit relocations for the .SUNW_dof section in order to obtain
the addresses of functions containing probe sites. DTrace expects the
addresses to be relative to the base address of the final ELF file,
and the amd64 USDT implementation was relying on some unspecified and
incorrect behaviour in the base system GNU ld to achieve this.
This change reimplements the probe site relocation handling to allow
USDT to be used with lld and newer GNU binutils. Specifically, it
makes use of R_X86_64_PC64/R_386_PC32 relocations to obtain the
probe site address relative to the DOF file address, and adds and uses a
new DOF relocation type which computes the final probe site address using
these relative offsets.
Reported by and discussed with: Rafael Espíndola
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9374
low-quality random numbers with a modern implementation (xoroshiro128+)
that is capable of generating better quality randomness without compromising performance.
Submitted by: Graeme Jenkinson
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9051
This corresponds to the following illumos issues:
5755 want support for Intel FMA instrs
5756 want support for Intel BMI1 instrs
5757 want support for Intel BMI2 instrs
5758 want support for Intel AVX2 instrs
7204 Want broadwell rdseed and adx support
7208 Want stac/clac disasm support
7733 Need SHA Instruction dis support
7756 dis can't handle x86 SSE 3 instructions
7757 want avx2 disasm tests
7758 want SSE 4.1 disasm tests
MFC after: 2 weeks
FASTTRAP_MAX_INSTR_SIZE is the largest valid value of a tracepoint, so
correct the assertion accordingly. This limit was hit with a 15-byte NOP.
Reported by: bdrewery
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This ioctl has been considered legacy by upstream since the DTrace code
was first imported, and is unused. The removal also allows some
simplification of dtrace_helper_slurp().
Also remove a bogus copyout in the DTRACEHIOC_ADDDOF handler. Due to a
bug, it would overwrite an in-memory copy of the DOF header rather than
the passed-in DOF helper. Moreover, DTRACEHIOC_ADDDOF already copies the
helper back out automatically since its argument has the IOC_OUT attribute.
6569 large file delete can starve out write ops
illumos/illumos-gate@ff5177ee8bff5177ee8bhttps://www.illumos.org/issues/6569
The core issue I've found is that there is no throttle for how many
deletes get assigned to one TXG. As a results when deleting large files
we end up filling consecutive TXGs with deletes/frees, then write
throttling other (more important) ops.
There is an easy test case for this problem. Try deleting several
large files (at least 1/2 TB) while you do write ops on the same
pool. What we've seen is performance of these write ops (let's
call it sideload I/O) would drop to zero.
More specifically the problem is that dmu_free_long_range_impl()
can/will fill up all of the dirty data in the pool "instantly",
before many of the sideload ops can get in. So sideload
performance will be impacted until all the files are freed.
The solution we have tested at Nexenta (with positive results)
creates a relatively simple throttle for how many "free" ops we let
into one TXG.
However this solution exposes other problems that should also be
addressed. If we are to slow down freeing of data that means one
has to wait even longer (assuming vnode ref count of 1) to get shell
back after an rm or for NFS thread to finish the free-ing op.
To avoid this the proposed solution is to call zfs_inactive() async
for "large" files. Async freeing then begs for the reclaimed space
to be accounted for in the zpool's "freeing" prop.
The other issue with having a longer delete is the inability to
export/unmount for a longer period of time. The proposed solution
is to interrupt freeing of blocks when a fs is unmounted.
Author: Alek Pinchuk <alek@nexenta.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Sanjay Nadkarni <sanjay.nadkarni@nexenta.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: avg
Differential Revision: D9008
the fifth argument to functions being traced, however there was an error
where the userspace stack was being used. This may be invalid leading to
a kernel panic if this address is unmapped.
Submitted by: Graeme Jenkinson <graeme.jenkinson@cl.cam.ac.uk>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9229
It was a temporary change to ease an import of native atomic_cas primitives.
Instead, atomic_fcmpset was devised with different semantics. See r311168.
At least on FreeBSD there are no legal way to access media or get its
size without opening device/provider first. Postponing this caching
allows to skip several disk seeks per ZVOL/snapshot during import.
For HDD pool with 1 ZVOL in dev mode with 1000 snapshots this reduces
pool import time from 40 to 10 seconds.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
These functions may be called in DTrace probe context, so they cannot be
safely traced. Moreover, they are currently only used by DTrace, so their
corresponding FBT probes are not particularly useful.
MFC after: 2 weeks
Original commit "7090 zfs should improve allocation order" declares alloc
queue sorted by time and offset. But in practice io_offset is always zero,
so sorting happened only by time, while order of writes with equal time was
completely random. On Illumos this did not affected much thanks to using
high resolution timestamps. On FreeBSD due to using much faster but low
resolution timestamps it caused bad data placement on disks, affecting
further read performance.
This change switches zio_timestamp_compare() from comparing uninitialized
io_offset to really populated io_bookmark values. I haven't decided yet
what to do with timestampts, but on simple tests this change gives the
same peformance results by just making code to work as declared.
MFC after: 1 week
On FreeBSD the sense of rw_write_held() and rw_iswriter() were reversed,
probably due to a cut and paste error. Using rw_iswriter() would cause
the kernel to panic.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8718
Note: there was a merge conflict resolved by me.
illumos/illumos-gate@43297f973a43297f973ahttps://www.illumos.org/issues/3821
We recently had nodes with some of the latest zfs bits panic on us in a
rollback-heavy environment. The following is from my preliminary analysis:
Let's look at where we died:
> $C
ffffff01ea6b9a10 taskq_dispatch+0x3a(0, fffffffff7d20450, ffffff5551dea920, 1)
ffffff01ea6b9a60 zil_clean+0xce(ffffff4b7106c080, 7e0f1)
ffffff01ea6b9aa0 dsl_pool_sync_done+0x47(ffffff4313065680, 7e0f1)
ffffff01ea6b9b70 spa_sync+0x55f(ffffff4310c1d040, 7e0f1)
ffffff01ea6b9c20 txg_sync_thread+0x20f(ffffff4313065680)
ffffff01ea6b9c30 thread_start+8()
If we dig in we can find that this dataset corresponds to a zone:
> ffffff4b7106c080::print zilog_t zl_os->os_dsl_dataset->ds_dir->dd_myname
zl_os->os_dsl_dataset->ds_dir->dd_myname = [ "8ffce16a-13c2-4efa-a233-
9e378e89877b" ]
Okay so we have a null taskq pointer. That only happens during the calls to
zil_open and zil_close. If we poke around we can see that we're actually in
midst of a rollback:
> ::pgrep zfs | ::printf "0x%x %s\\n" proc_t . p_user.u_psargs
0xffffff43262800a0 zfs rollback zones/15714eb6-f5ea-469f-ac6d-
4b8ab06213c2@marlin_init
0xffffff54e22a1028 zfs rollback zones/8ffce16a-13c2-4efa-a233-
9e378e89877b@marlin_init
0xffffff4362f3a058 zfs rollback zones/0ddb8e49-ca7e-42e1-8fdc-
4ac4ba8fe9f8@marlin_init
0xffffff5748e8d020 zfs rollback zones/426357b5-832d-4430-953e-
10cd45ff8e9f@marlin_init
0xffffff436b867008 zfs rollback zones/8f36bf37-8a9c-4a44-995c-
6d1b2751e6f5@marlin_init
0xffffff4381ad4090 zfs rollback zones/6c8eca18-fbd6-46dd-ac24-
2ed45cd0da70@marlin_init
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@90f2c094b390f2c094b3https://www.illumos.org/issues/7181
zfsvfs_setup() is called in both zfs_mount and zfs_resume_fs paths.
dmu_objset_set_user(zfsvfs->z_os, zfsvfs) is called early in zfsvfs_setup()
before the setup is actually completed,
thus an under-constructed zfsvfs becomes visible.
Additionally, there is nothing to serialize the two call paths. As a result two
threads can step on each other's toes.
assertion failed: zilog->zl_clean_taskq == NULL, file:
../../common/fs/zfs/zil.c, line: 1772
> $c
vpanic()
0xfffffffffbdf6928()
zil_open+0x45(ffffff1bbc5dd000, fffffffff7993880)
zfsvfs_setup+0x84(ffffffb378d77000, 0)
zfs_resume_fs+0x132(ffffffb378d77000, ffffffb37ddcf000)
zfs_ioc_rollback+0x96(ffffffb37ddcf000, ffffff01dcdc4cd0, ffffff01aa091000)
zfsdev_ioctl+0x215(10a00000000, 5a19, 80465f8, 100003, ffffff01ab318368,
ffffff0004b59e58)
cdev_ioctl+0x39(10a00000000, 5a19, 80465f8, 100003, ffffff01ab318368,
ffffff0004b59e58)
spec_ioctl+0x60(ffffff0197737700, 5a19, 80465f8, 100003,
ffffff01ab318368, ffffff0004b59e58)
fop_ioctl+0x55(ffffff0197737700, 5a19, 80465f8, 100003,
ffffff01ab318368, ffffff0004b59e58)
ioctl+0x9b(7, 5a19, 80465f8)
sys_syscall32+0x1f7()
> ffffff1bbc5dd000::print objset_t os_zil
os_zil = 0xffffff1c053cf7c0
> 0xffffff1c053cf7c0::print zilog_t zl_clean_taskq
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 2 weeks
already free blocks
7199 dsl_dataset_rollback_sync may try to free already free blocks
7200 no blocks must be born in a txg after a snaphot is created
illumos/illumos-gate@bfaed0b91ebfaed0b91ehttps://www.illumos.org/issues/7199
dsl_dataset_rollback_sync may try to free already freed blocks when it calls
dsl_destroy_head_sync_impl to destroy a temporary clone.
That happens if a snapshot to which we are rolling back and from which the
clone is created has some ZIL records.
https://www.illumos.org/issues/7200
No new blocks must be born in a dataset in the same TXG after a snapshot of the
dataset is taken.
Those blocks would have the same blk_birth as the dataset's ds_prev_snap_txg
and as such they would be presumed to belong o the snapshot while in fact they
do not.
All the datasets must be clean before sync tasks are run, so the described
scenario may happen only if one of the sync tasks dirties the dataset and
another sync task takes its snapshot.
Then, there will be another sync pass because of the dirty data and the new
blocks will be born in the same TXG when the data is written out.
It seems that almost all of the existing sync tasks modify only MOS and do not
dirty any objsets.
The only exception that I've been able to identify so far is the rollback which
can modify an objset when it zeroes out the objset's ZIL.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 3 weeks
and zfs_ioc_rename
illumos/illumos-gate@690041b9ca690041b9cahttps://www.illumos.org/issues/7180
If a filesystem is not unmounted while the rename is being performed, then, for
example, a concurrect zfs rollback may call zfs_suspend_fs followed by
zfs_resume_fs on the same filesystem.
The latter takes the filesystem's name as an argument. If the filesystem name
changes as a result of the rename, then dmu_objset_hold(osname, zfsvfs, &os)
call in zfs_resume_fs would fail resulting in a kernel panic.
So far I have been able to reproduce this problem on FreeBSD where zfs rename
has -u option that skips the unmounting before doing the renaming.
But I think that in theory the same problem can occur on illumos as well,
because the unmounting is done in userland before invoking the rename ioctl and
there could be a race with, e.g., zfs mount.
panic: solaris assert: dmu_objset_hold(osname, zfsvfs, &zfsvfs->z_os) == 0 (0x2
== 0x0), file: /usr/devel/svn/head/sys/cddl/contrib/opensolaris/uts/common/fs/
zfs/zfs_vfsops.c, line: 2210
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe004df30710
vpanic() at vpanic+0x182/frame 0xfffffe004df30790
panic() at panic+0x43/frame 0xfffffe004df307f0
assfail3() at assfail3+0x2c/frame 0xfffffe004df30810
zfs_resume_fs() at zfs_resume_fs+0xb9/frame 0xfffffe004df30860
zfs_ioc_rollback() at zfs_ioc_rollback+0x61/frame 0xfffffe004df308a0
zfsdev_ioctl() at zfsdev_ioctl+0x65c/frame 0xfffffe004df30940
devfs_ioctl_f() at devfs_ioctl_f+0x156/frame 0xfffffe004df309a0
kern_ioctl() at kern_ioctl+0x246/frame 0xfffffe004df30a00
sys_ioctl() at sys_ioctl+0x171/frame 0xfffffe004df30ae0
amd64_syscall() at amd64_syscall+0x2db/frame 0xfffffe004df30bf0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe004df30bf0
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
MFC after: 2 weeks
It was very wrong to look at the vnode and znode internals without
having locked the vnode first.
Reported by: pho
Tested by: pho
MFC after: 1 week
X-MFC with: r308887
longer used. More precisely, they are always zero because the code that
decremented and incremented them no longer exists.
Bump __FreeBSD_version to mark this change.
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8583
The idea was to avoid a false assertion in zfs_lock, but it was
implemented very dangerously and incorrectly.
Reported by: pho
Tested by: pho
MFC after: 1 week
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.
Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG. Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.
Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size. In some
cases efficiency stopped to almost as low as 50%. In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas. This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently. Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.
While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.
Sponsored by: iXsystems, Inc.
not remove user-space visible fields from vm_cnt or all of the references to
cached pages from comments. Those changes will come later.)
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8497
These are FreeBSD-specific and were added in r178576 to provide the ability
to pretty-print instances of compound types. However, the print action has
long since been augmented to provide this functionality with a simpler
interface.
Discussed with: gnn
Differential Revision: https://reviews.freebsd.org/D8478
Before this an earlier writes to a ZVOL opened without FSYNC could get to
ZIL after later writes to the same ZVOL opened with FSYNC. Fix this by
replicating functionality of ZPL (zv_sync_cnt equivalent to z_sync_cnt),
marking all log records sync if anybody opened the ZVOL with FSYNC.
MFC after: 2 weeks
(gpt)zfsboot will read one-time boot directives from a special ZFS pool
area. The area was previously described as "Boot Block Header", but
currently it is know as Pad2, marked as reserved and is zeroed out on
pool creation. The new code interprets data in this area, if any, using
the same format as boot.config. The area is immediately wiped out.
Failure to parse the directives results in a reboot right after the
cleanup. Otherwise the boot sequence proceeds as usual.
zfsbootcfg writes zfsboot arguments specified on its command line to the
Pad2 area of a disk identified by vfs.zfs.boot.primary_pool and
vfs.zfs.boot.primary_vdev kenv variables that are set by loader during
boot. Please see the manual page for more.
Thanks to all who reviewed, contributed and made suggestions! There are
many potential improvements to the feature, please see the review for
details.
Reviewed by: wblock (docs)
Discussed with: jhb, tsoome
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7612
It allows to avoid extra GEOM providers flapping without significant need.
Since GEOM got resize support, we don't need to reopen provider to get new
size. If provider was orphaned and no longer valid, ZFS should already
know that, and in such case reopen should be done in full as expected.
MFC after: 2 weeks
In case of vdev detach, causing top level mirror vdev destruction, leaf
vdev changes its GUID to one of the destroyed mirror, that creates race
condition when GUID in vdev label may not match one in the pool config.
This change replicates logic nuance of vdev_validate() by adding special
exception, matching the vdev GUID against the top level vdev GUID.
Since this exception is not completely reliable (may give false positives
if we fail to erase label on detached vdev), use it only as last resort.
Quick way to reproduce this scenario now is detach vdev from a pool with
enabled autoextend. During vdev detach autoextend logic tries to reopen
remaining vdev, that always fails now since in-memory configuration is
already updated, while on-disk labels are not yet.
MFC after: 2 weeks
illumos/illumos-gate@260af64db7260af64db7https://www.illumos.org/issues/3746
From the original change log:
It was possible for a reference to be added even with the lock held, and
for references added just after a lock release to be lost.
This bug was also independently found and reported in wesunsolve.net
issues 6985013 6995524.
In zrl_add(), always use an atomic operation to update the refcount.
The mutex in the ZRL only guarantees that wakeups occur for waiters on the
lock. It offers no protection against concurrent updates of the refcount.
The only refcount transition that is safe to perform without an atomic
operation is from ZRL_LOCKED back to 0, since this can only be performed
by the thread which has the ZRL locked.
Authored by: Will Andrews <will@freebsd.org>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed by: Pavel Zakharov <pavel.zakha@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com>
Approved by: Matt Ahrens <mahrens@delphix.com>
Author: Youzhong Yang <yyang@mathworks.com>
PR: 204037
MFC after: 1 week
These allocations can reach up to 128KB, while FreeBSD kernel allocator
can cache allocations only up to 64KB. To avoid expensive allocations
for each large ZIL write use caching zio_buf_alloc() allocator instead.
To make it possible de-inline few instances of zil_itx_destroy().
6988 spa_sync() spends half its time in dmu_objset_do_userquota_updates
Using a benchmark which creates 2 million files in one TXG, I observe
that the thread running spa_sync() is on CPU almost the entire time we
are syncing, and therefore can be a performance bottleneck. About 50% of
the time in spa_sync() is in dmu_objset_do_userquota_updates().
The problem is that dmu_objset_do_userquota_updates() calls
zap_increment_int(DMU_USERUSED_OBJECT) once for every file that was
modified (or created). In this benchmark, all the files are owned by the
same user/group, so all 2 million calls to zap_increment_int() are
modifying the same entry in the zap. The same issue exists for the
DMU_GROUPUSED_OBJECT.
We should keep an in-memory map from user to space delta while we are
syncing, and when we finish, iterate over the in-memory map and modify
the ZAP once per entry. This reduces the number of calls to
zap_increment_int() from "number of objects modified" to "number of
owners/groups of modified files".
This reduced the time spent in spa_sync() in the file create benchmark
by ~33%, from 11 seconds to 7 seconds.
Closes#107
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Jinshan Xiong <jinshan.xiong@intel.com>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@5fc46359c5
5120 zfs should allow large block/gzip/raidz boot pool (loader project)
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Toomas Soome <tsoome@me.com>
openzfs/openzfs@c8811bd3e2
FreeBSD still does not support booting from gzip-compressed datasets,
so keep one chunk of this commit out.
Suppose that we have an exclusively busy page, and a thread which can
accept shared-busy page. In this case, typical code waiting for the
page xbusy state to pass is
again:
VM_OBJECT_WLOCK(object);
...
if (vm_page_xbusied(m)) {
vm_page_lock(m);
VM_OBJECT_WUNLOCK(object); <---1
vm_page_busy_sleep(p, "vmopax");
goto again;
}
Suppose that the xbusy state owner locked the object, unbusied the
page and unlocked the object after we are at the line [1], but before we
executed the load of the busy_lock word in vm_page_busy_sleep(). If it
happens that there is still no waiters recorded for the busy state,
the xbusy owner did not acquired the page lock, so it proceeded.
More, suppose that some other thread happen to share-busy the page
after xbusy state was relinquished but before the m->busy_lock is read
in vm_page_busy_sleep(). Again, that thread only needs vm_object lock
to proceed. Then, vm_page_busy_sleep() reads busy_lock value equal to
the VPB_SHARERS_WORD(1).
In this case, all tests in vm_page_busy_sleep(9) pass and we are going
to sleep, despite the page being share-busied.
Update check for m->busy_lock == VPB_UNBUSIED in vm_page_busy_sleep(9)
to also accept shared-busy state if we only wait for the xbusy state to
pass.
Merge sequential if()s with the same 'then' clause in
vm_page_busy_sleep().
Note that the current code does not share-busy pages from parallel
threads, the only way to have more that one sbusy owner is right now
is to recurse.
Reported and tested by: pho (previous version)
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D8196
Other uses of cache_purgevfs() do rely on the cache purge for correct
operations, when paths are invalidated without unmount.
Reported and tested by: jkim
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
This should allow vn_fullpath() to work even when vfs name cache is
disabled for zfs, which is the case when zfs properties like
casesensitivity and normalization are set non-default values.
The new code should be 100% reliable for directories and "mostly"
reliable for files, that is, when hardlinks across directories are
not used.
Reported by: Frederic Chardon <chardon.frederic@gmail.com>
Reviewed by: kib (vfs contract)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8146
For the extended attributes the order between z_teardown_lock and the
vnode lock is different.
The bug was triggered only with DIAGNOSTIC turned on.
This fix is developed in cooperation with avos.
PR: 213112
Reported by: avos
Tested by: avos
MFC after: 1 week
This restriction was inherited from upstream but is not relevant on FreeBSD.
Furthermore, it hindered the tracing of locking primitive subroutines.
MFC after: 1 week
Until we can resolve the numerous hole_birth bugs that have cropped up
recently, and come up with a way going forwards to protect users from
corruption, we should disable the hole_birth feature. Using a tunable
allows those who are confident that their data is correct to continue to
take advantage of the feature.
Closes#188
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
dsl_dataset_space is looking at the ds_bp's fill count while
dmu_objset_write_ready() is concurrently modifying it. This fix adds an
rrwlock to protect the ds_bp.
Closes#180
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
Background. In ZFS a file with extended attributes has a special
directory associated with it where each extended attribute is a file.
The attribute's name is a file name and its value is a file content.
When the ownership of a file with extended attributes is changed, ZFS
also changes ownership of the special directory. This is where the bug
was hit.
The bug was introduced in r209158.
Nota bene. ZFS vnode locks are typically acquired before
z_teardown_lock (i.e., before ZFS_ENTER). But this is not the case for
the vnodes that represent the extended attribute directory and files.
Those are always locked after ZFS_ENTER. This is confusing and fragile.
PR: 212702
Reported by: Christian Fuss to FreeNAS
Tested by: mav
MFC after: 1 week
Otherwise there exists a narrow window during which a syscall probe can be
disabled and cause a concurrently-running thread to call dtrace_probe()
with an invalid probe ID.
Reported by: ngie
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Our shim for Solaris random_get_bytes() uses read_random(), that looks
reasonable, since it guaranties reliably seeded random data. On the other
side Solaris random_get_pseudo_bytes() does not provide this guarantie,
and its original Solaris implementation is equivalent to our arc4rand(),
using software crypto without stressing slower hardware RNG.
The DS_FIELD_LARGE_BLOCKS macro has been unused since the integration of
this patch:
commit ca0cc3918a1789fa839194af2a9245f801a06b1a
Author: Matthew Ahrens <mahrens@delphix.com>
Date: Fri Jul 24 09:53:55 2015 -0700
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This patch simply removes this macro from dsl_dataset.h.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
When changing zfs_arc_max (e.g. as zdb does), it may be set to less
than the default arc_c_min. arc_c_min should decrease to not be more than
arc_c_max, but it doesn't; therefore tuning of arc_c_max is ineffective.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@608764bead
The upstream change introduced a new load state, SPA_LOAD_CREATE,
and vdev_geom code needs to be aware of it.
Tested by: cy
MFC after: 1 week
X-MFC with: r305331
Using a benchmark which has 32 threads creating 2 million files in the
same directory, on a machine with 16 CPU cores, I observed poor
performance. I noticed that dmu_tx_hold_zap() was using about 30% of
all CPU, and doing dnode_hold() 7 times on the same object (the ZAP
object that is being held).
dmu_tx_hold_zap() keeps a hold on the dnode_t the entire time it is
running, in dmu_tx_hold_t:txh_dnode, so it would be nice to use the
dnode_t that we already have in hand, rather than repeatedly calling
dnode_hold(). To do this, we need to pass the dnode_t down through
all the intermediate calls that dmu_tx_hold_zap() makes, making these
routines take the dnode_t* rather than an objset_t* and a uint64_t
object number. In particular, the following routines will need to have
analogous *_by_dnode() variants created:
dmu_buf_hold_noread()
dmu_buf_hold()
zap_lookup()
zap_lookup_norm()
zap_count_write()
zap_lockdir()
zap_count_write()
This can improve performance on the benchmark described above by 100%,
from 30,000 file creations per second to 60,000. (This improvement is on
top of that provided by working around the object allocation issue. Peak
performance of ~90,000 creations per second was observed with 8 CPUs;
adding CPUs past that decreased performance due to lock contention.) The
CPU used by dmu_tx_hold_zap() was reduced by 88%, from 340 CPU-seconds
to 40 CPU-seconds.
Sponsored by: Intel Corp.
Closes#109
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@d3e523d489
This resolves two 'zfs recv' issues. First, when receiving into an
existing filesystem, a snapshot created during the receive process is
not added to the guid->dataset map for the stream, resulting in failed
lookups for deduped streams when a WRITE_BYREF record refers to a
snapshot received earlier in the stream. Second, the newly created
snapshot was also not set properly, referencing the snapshot before the
new receiving dataset rather than the existing filesystem.
Closes#159
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Author: Chris Williamson <chris.williamson@delphix.com>
openzfs/openzfs@b09697c8c1
zap_lockdir() / zap_unlockdir() should take a "void *tag" argument which
tags the hold on the zap. This will help diagnose programming errors
which misuse the hold on the ZAP.
Sponsored by: Intel Corp.
Closes#108
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@0780b3eab5
7230 add assertions to dmu_send_impl() to verify that stream includes BEGIN and END records
illumos/illumos-gate@12b90ee2d3https://github.com/illumos/illumos-gate/commit/12b90ee2d3b10689fc45f4930d2392f5f
e1d9cfa
https://www.illumos.org/issues/7230
A test failure occurred where a send stream had only a BEGIN record. This
should not be possible if the send returns without error. Prevented this from
happening in the future by adding an assertion to dmu_send_impl() to verify
that if the function returns 0 (success) both a BEGIN and END record are
present. Did this by adding flags to dmu_sendarg_t (indicating whether BEGIN o
r
END records sent), having dump_record() set flags appropriately, adding VERIFY
statement to dmu_send_impl().
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matt Krantz <matt.krantz@delphix.com>
illumos/illumos-gate@0f7643c737https://github.com/illumos/illumos-gate/commit/0f7643c7376dd69a08acbfc9d1d7d548b
10c846a
https://www.illumos.org/issues/7090
When write I/Os are issued, they are issued in block order but the ZIO pipelin
e
will drive them asynchronously through the allocation stage which can result i
n
blocks being allocated out-of-order. It would be nice to preserve as much of
the logical order as possible.
In addition, the allocations are equally scattered across all top-level VDEVs
but not all top-level VDEVs are created equally. The pipeline should be able t
o
detect devices that are more capable of handling allocations and should
allocate more blocks to those devices. This allows for dynamic allocation
distribution when devices are imbalanced as fuller devices will tend to be
slower than empty devices.
The change includes a new pool-wide allocation queue which would throttle and
order allocations in the ZIO pipeline. The queue would be ordered by issued
time and offset and would provide an initial amount of allocation of work to
each top-level vdev. The allocation logic utilizes a reservation system to
reserve allocations that will be performed by the allocator. Once an allocatio
n
is successfully completed it's scheduled on a given top-level vdev. Each top-
level vdev maintains a maximum number of allocations that it can handle
(mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels *
mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab
groups and round robin across all eligible metaslab groups to distribute the
work. As top-levels complete their work, they receive additional work from the
pool-wide allocation queue until the allocation queue is emptied.
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
7086 ztest attempts dva_get_dsize_sync on an embedded blockpointer
illumos/illumos-gate@926549256bhttps://github.com/illumos/illumos-gate/commit/926549256b71acd595f69b236779ff6b7
8fa08ef
https://www.illumos.org/issues/7086
In dbuf_dirty(), we need to grab the dn_struct_rwlock before looking at the
db_blkptr, to prevent it from being changed by syncing context.
Otherwise we may see that ztest got a segfault from this stack:
libzpool.so.1`dva_get_dsize_sync+0x98(872f000, b32b240, fed7811b, 0, b4cda20,
0)
libzpool.so.1`bp_get_dsize+0x60(872f000, b32b240, 0, 97cb780, 9d4c1a8, 0)
libzpool.so.1`dbuf_dirty+0x9b3(ce0a100, 97cb780, 9, fecd2530)
libzpool.so.1`dmu_buf_will_dirty+0xc3(ce0a100, 97cb780, ea293d6c, 1)
libzpool.so.1`zap_lockdir+0x1a0(8aaa3c0, 1, 0, 97cb780, 1, 1)
libzpool.so.1`zap_remove_norm+0x30(8aaa3c0, 1, 0, 8728b10, 0, 97cb780)
libzpool.so.1`zap_remove+0x29(8aaa3c0, 1, 0, 8728b10, 97cb780, a)
ztest_replay_remove+0x225(ea294588, 8728ae8, 0, 38010000, 0, 0)
ztest_remove+0x9f(ea294588, ea293f50, 4, 3)
ztest_object_init+0x78(ea294588, ea293f50, 4e0, 1)
ztest_dmu_object_alloc_free+0x71(ea294588, 13)
ztest_dmu_objset_create_destroy+0x224(80cef08, 13, 0, 805d36c, 9017ad44, 0)
ztest_execute+0x89(a, 807c720, 13, 0)
ztest_thread+0xea(13, 0, 0, 0)
libc.so.1`_thrp_setup+0x88(f0983240)
libc.so.1`_lwp_start(f0983240, 0, 0, 0, 0, 0)
Looking into it a bit, we see that this is an embedded blockpointer, so
BP_GET_NDVAS should have returned 0:
b32b240::blkptr
EMBEDDED [L0 ZAP_OTHER] et=0 LZ4 size=200L/4aP birth=80L
Instead, it looks like another thread is modifying this blockpointer:
b32b240::ugrep | ::whatis
f47a0e0c is in [ stack tid=0x19f ]
ebd6ec40 is in [ stack tid=0x226 ]
ea293bd0 is in [ stack tid=0x244 ]
ea293be4 is in [ stack tid=0x244 ]
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
7072 zfs fails to expand if lun added when os is in shutdown state
illumos/illumos-gate@c39a2aae1ec39a2aae1ehttps://www.illumos.org/issues/7072
upstream:
38733 zfs fails to expand if lun added when os is in shutdown state
DLPX-36910 spares and caches should not display expandable space
DLPX-39262 vdev_disk_open spam zfs_dbgmsg buffer
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@dcbf3bd6a1dcbf3bd6a1https://www.illumos.org/issues/6950
When reading compressed data from disk, the ARC should keep the compressed
block cached and only decompress it when consumers access the block. The
uncompressed data should be short-lived allowing the ARC to cache a much larger
amount of data. The DMU would also maintain a smaller cache of uncompressed
blocks to minimize the impact of decompressing frequently accessed blocks.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: George Wilson <george.wilson@delphix.com>
7136 ESC_VDEV_REMOVE_AUX ought to always include vdev information
7115 6922 generates ESC_ZFS_VDEV_REMOVE_AUX a bit too often
illumos/illumos-gate@b72b6bb10ahttps://github.com/illumos/illumos-gate/commit/b72b6bb10ad55121a1b352c6f68ebdc8e
20c9086
https://www.illumos.org/issues/7136
6922 added ESC_ZFS_VDEV_REMOVE_AUX and ESC_ZFS_VDEV_REMOVE_DEV sysevents
whenever an aux device gets removed from a pool. However, those sysevents will
be created without the vdev_guid and vdev_path fields. It would be better to
always populate those fields.
https://www.illumos.org/issues/7115
The addition of spa_event_notify in vdev removal code (see #6922) causes event
s
to be generated even if the spare failed to be removed with EBUSY.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Alan Somers <asomers@gmail.com>
illumos/illumos-gate@4b5c8e93cahttps://github.com/illumos/illumos-gate/commit/4b5c8e93cab28d3c65ba9d407fd8f46e3
be1db1c
https://www.illumos.org/issues/7104
The current default indirect block size is 16KB. We can improve
performance by increasing it to 128KB. This is especially helpful for
any workload that needs to read most of the metadata, e.g.
scrub/resilver, file deletion, filesystem deletion, and zfs send.
We also need to fix a few space estimation errors to make the tests
pass.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@759e89be35https://github.com/illumos/illumos-gate/commit/759e89be359f2af635e4122d147df56bc
e948773
https://www.illumos.org/issues/6447
I got a patch from someone who uses nvpair code outside of illumos. It fixes a
couple of gcc warnings/bugs for him.
1. silence uninitialized use warnings
2. add parentheses around assignment used as truth value
3. fix printf format specifier (ll is for integers only)
4. strstr, strspn, strcspn, and strcmp are declared in string.h, not
strings.h.
5. avoid scanning integer into boolean variable
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Steve Dougherty <sdougherty@barracuda.com>
illumos/illumos-gate@9adfa60d48https://github.com/illumos/illumos-gate/commit/9adfa60d484ce2435f5af77cc99dcd4e6
92b6660
https://www.illumos.org/issues/6314
Callers of dsl_dataset_name pass a buffer of size ZFS_MAXNAMELEN, but
dsl_dataset_name copies the datasets' name PLUS the snapshot name to it,
resulting in a max of 2 * ZFS_MAXNAMELEN + '@'.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
Note that the bulk of the upstream change is not applicable to FreeBSD
and the affected files are not even in the vendor area.
illumos/illumos-gate@45b174751545b1747515https://www.illumos.org/issues/7019
Currently zfsdev_ioctl, when confronted by a request with the FKIOCTL flag set,
skips all processing of secpolicy functions. This means that ZFS is not doing
any kind of verification of the credentials or access rights of the caller and
assuming that (as it is an in-kernel client) all such checks have already been
done.
This turns out to be quite a dangerous assumption, especially with respect to
sdev. In general I don't think it's particularly reasonable to offload this
enforcement of access rights onto other kernel subsystems when ZFS has some
particular local semantics in this area (delegated datasets etc) and does not
provide any kind of API to allow other subsystems to avoid code duplication
when doing it. ZFS should apply its normal access policy to requests from
within the kernel, and callers should take care to give it the correct
credentials and call it from the correct context in order to get the results
they need.
You can observe the currently unfortunate consequences of this bug in any non-
global zone that has access to /dev/zvol or any subset of it via sdev profiles.
In particular, a zone used to contain a KVM or similar which has a single zvol
passed through to it using a <device match= block in its zone XML.
Even though sdev makes something of an attempt to control for whether the
caller should have access to nodes in /dev/zvol, it doesn't do this correctly,
or really at all in the lookup call path. So, if we have a zone that's been
given access to any part of /dev/zvol, it can simply look up the full path to
any other zvol on the entire system, and the node will appear and be able to be
used.
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alex Wilson <alex.wilson@joyent.com>
illumos/illumos-gate@63364b0ee2https://github.com/illumos/illumos-gate/commit/63364b0ee2604783e7a55f84258888677
68eafa4
https://www.illumos.org/issues/6922
ZFS does not do a config_sync after removing an aux (spare, log, or cache)
device. AFAICT this isn't being done because it is slow and was deemed
unnecessary. However, it should be such a rare operation that speed doesn't
matter, and not doing it results in two problems:
1) It is theoretically possible to remove an aux device from one pool and
attach it to another, then lose power. When power is restored, both pools woul
d
think that they own the aux device.
2) Removal of the aux device doesn't send any useful sysevents to userland.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alan Somers <asomers@gmail.com>
6902 speed up listing of snapshots if requesting name only and sorting by name
This was our change from the beginning, so just reduce the upstream diff.
6876 Stack corruption after importing a pool with a too-long name
illumos/illumos-gate@c971037baac971037baahttps://www.illumos.org/issues/6876
Calling dsl_dataset_name on a dataset with a 256 byte buffer is asking for
trouble. We should check every dataset on import, using a 1024 byte buffer and
checking each time to see if the dataset's new name is longer than 256 bytes.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Paul Dagnelie <pcd@delphix.com>
There are two writable hidden properties "iscsioptions" and "stmf_sbd_lu",
that have no default string value. Attempt to unset them or replicate
caused kernel panic. This simple bandaid seems fixes the problem nicely.
MFC after: 2 weeks
The issue was introduced with adding support for salted checksums, and
was revealed by bhyve userboot.so.
During pool discovery the loader is reading pool label from disks, and
at that time the spa structure is not yet set up, so the NULL pointer
is passed for spa. This condition must be checked to avoid the corruption
of the memory and NULL pointer dereference.
PR: 212114
Reported by: tsoome@freebsd.com
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D7634
Updated sha512 from illumos.
Using skein from freebsd crypto tree.
Since loader itself is using 64MB memory for heap, updated zfsboot to
use same, and this also allows to support zfs large blocks.
Note, adding additional features does increate zfsboot code, therefore
this update does increase zfsboot code to 128k, also I have ported gptldr.S
update to zfsldr.S to support 64k+ code.
With this update, boot1.efi has almost reached the current limit of the size
set for it, so one of the future patches for boot1.efi will need to
increase the limit.
Currently known missing zfs features in boot loader are edonr and gzip support.
Reviewed by: delphij, imp
Approved by: imp (mentor)
Obtained from: sha256.c update and skein_zfs.c stub from illumos.
Differential Revision: https://reviews.freebsd.org/D7418
