mlaier
9cf451328d
Make ip_nat compile again. Should read #if->n<-def LARGE_NAT as in ipf 4.x
2004-12-18 03:47:54 +00:00
julian
dbd1bd5be7
Slight change to formatting so that 'ctags' doesn't
...
give up on teh file half way through.. Might have been my
mistake earlier anyhow. No actual code change
MFC after: 5 days
2004-12-18 01:20:18 +00:00
jkoshy
fc0ef2974e
Document "machdep.hlt_cpus".
...
Reviewed by: ru
2004-12-18 01:13:37 +00:00
jkoshy
1b6e938d41
Uncomment entries for FreeBSD 6.0 and 4.11.
...
Requested by: ru
2004-12-18 01:07:18 +00:00
brueffer
396a9f842f
Specify the state of my birth, similar to other entries.
2004-12-18 00:58:22 +00:00
brueffer
0dc3ac5a70
BCM5721 is supported as well.
2004-12-17 23:03:30 +00:00
ps
cbeb33bd35
Add support for the 5721 which seems to be similar to the 5750/5751.
...
Tested by: Vivek Khera vivek at khera dot org
2004-12-17 21:50:18 +00:00
rse
b88cc5aa83
1. To give the user a clue about the expiration timeout values, mention
...
the default timeouts of 1800 (activity) and 15 (inactivity) seconds.
2. Fix the "ifinfo" ASCII control message description:
it requires the interface number as an argument.
MFC after: 2 days
2004-12-17 20:49:01 +00:00
mdodd
2fc00c6e91
Diff reduce wi_write_wep() relative to revision 1.168
2004-12-17 20:48:13 +00:00
brueffer
c4b0b32c03
Modify the name of the supported bluetooth card.
...
Discussed with: emax
2004-12-17 19:01:55 +00:00
alc
c4f7988cf9
Eliminate another unnecessary call to vm_page_busy(). (See revision 1.333
...
for a detailed explanation.)
2004-12-17 18:54:51 +00:00
brueffer
7d3a2c19ea
Autogenerate device listings for umass(4).
...
MFC after: 3 days
2004-12-17 18:37:58 +00:00
brueffer
66fa47c120
- add a HARDWARE section based on the hardware notes and the devices
...
already listed in the manpage
- reword some DESCRIPTION sentences
- Xref ehci(4)
- bump .Dd
MFC after: 3 days
2004-12-17 18:35:38 +00:00
simon
428e97bf3c
Correct entity name added in the last revision.
2004-12-17 18:19:44 +00:00
peter
eb2a167966
Recognize the 32-bit form of the twe binary passthrough ioctl()s so that
...
there is some hope for the 32-bit management utilities to run. I've used
the cli successfully, but 3dm2 doesn't work for other reasons. Of course,
a native binary of the 3dm2 and cli would be much better, but that doesn't
exist.
2004-12-17 17:45:29 +00:00
alc
aafcafb659
Enable debug.mpsafevm by default on alpha.
2004-12-17 17:17:36 +00:00
jkoshy
ba92b051ce
Revert rev 1.66. This file needs to track its upstream source.
...
Requested by: ru
2004-12-17 16:29:54 +00:00
darrenr
62b778ce28
Move two variables that are unused if LARGE_NAT is defined inside an #ifdef
...
to keep them out of harms way when compiling.
PR: 72783
2004-12-17 15:59:16 +00:00
jkoshy
9f8908c9d1
Mark mknod(8) as deprecated. Add text in the 'COMPATIBILITY' section
...
describing the changes in device management since FreeBSD 4.0.
Reviewed by: ru
2004-12-17 14:36:02 +00:00
jkoshy
ac7b091a54
Remove mention of block devices. Mention that entries under /dev
...
are managed by devfs(5). Add cross-references.
Reviewed by: ru
2004-12-17 14:28:53 +00:00
jkoshy
073d92b022
Support for ".Fx 6.0".
...
Reviewed by: ru
2004-12-17 14:10:44 +00:00
krion
28007e4e88
Introduce new variables FETCHINDEX, MASTER_SITE_INDEX and add
...
description for MASTER_SITE_BACKUP.
Based on PR: ports/74709
Submitted by: Valentin Nechayev <netch@netch.kiev.ua>
Reviewed by: ru
MFC after: 3 days
2004-12-17 13:39:55 +00:00
ru
c5bea8b66d
err() -> errx()
2004-12-17 13:24:22 +00:00
harti
ebeffbcdeb
Remove all the cleanup functions. There is no reason to free memory
...
just before exiting (especially given the number of memory leaks) -
it just costs time.
2004-12-17 13:20:19 +00:00
glebius
fbe42b3f98
Bump .Dd
...
Reminded by: ru
2004-12-17 12:59:20 +00:00
glebius
3335b3bcac
Note that send(2) is no longer applicable to divert(4) sockets.
...
Noticed by: Dmitry Dvoinikov
Wording by: cperciva
MFC after: 3 days
2004-12-17 11:24:33 +00:00
brueffer
6fab81df23
Autogenerate device listings for ng_bt3c(4).
...
MFC after: 3 days
2004-12-17 10:31:00 +00:00
brueffer
f8e052a91c
- add a HARDWARE section
...
- several grammar and language fixes
- bump .Dd
MFC after: 3 days
2004-12-17 10:13:02 +00:00
ru
dbf467b697
Minor tweaks in "make update" comments.
2004-12-17 10:11:33 +00:00
brueffer
1500948107
Add missing word.
...
MFC after: 3 days
2004-12-17 09:34:48 +00:00
sam
e7607b9bf5
Fix wep operation for station mode:
...
o don't encapsulate on tx; the chip expect a raw frame w/o the crypto header
o clear the WEP bit in the 802.11 header on rx so the 802.11 layer doesn't
try to strip the crypto header
o clobber the "drop unencoded frames" state bit when privacy is enabled so
rx'd frames we pass up to the 802.11 layer are not discarded as unencrypted
This stuff will need to be redone if anyone decides to add WPA support.
2004-12-17 03:57:16 +00:00
sam
18314077b7
set ic_ibss_chan when entering RUN state to match ic_bss so the channel
...
reported when associated to an AP is correct
2004-12-17 03:36:24 +00:00
jmg
584f9ac38a
don't try to recurse on the bpf lock.. kqueue already locks the bpf lock
...
now...
Submitted by: Ed Maste of Sandvine Inc.
MFC after: 1 week
2004-12-17 03:21:46 +00:00
sam
0226dc1c6f
remove power save logic from the tx path; the driver isn't ready to support
...
it so don't mislead folks
2004-12-17 03:05:30 +00:00
brueffer
dc6e9b46a9
Properly capitalize FireWire
...
MFC after: 3 days
2004-12-17 02:33:42 +00:00
darrenr
bb353fef0f
Allow ipnat redirect rules to work for non-TCP/UDP packets.
...
PR: 70038
Submitted by: fming@borderware.com
Reviewed by: darrenr
Obtained from: fming@borderware.com
2004-12-17 02:29:34 +00:00
gad
60517f2012
When printing a data file received from some other host, check to make
...
sure the data file has been completely transfered before starting to
print it. This is needed because some implementations of lpr will send
the control-file for a print job before sending the matching data-files,
and that can cause problems if the receiving host is a busy print-server.
MFC after: 2 weeks
2004-12-17 01:54:50 +00:00
julian
db3f0adb10
Forced commit to note that the previous patch apparently
...
came originaly from the keyboard of:
Submitted by: Branko Lankester <branko@euro.net>
2004-12-17 00:57:48 +00:00
julian
a063053802
Add a missing prototype.
...
MFC after: 1 week
2004-12-17 00:25:56 +00:00
julian
900b64f296
Allow /sys/dev/bktr to support Pinnacle PCTV Rave cards
...
PR: 73669
Submitted by: arne_woerner at yahoo dot com
MFC after: 1 week
2004-12-16 23:37:41 +00:00
julian
3b2878da37
Add some locking for -currnet/5.x
...
PR: 74305
Submitted by: Anish Mistry <amistry at am-productions dot biz>
MFC after: 1 week
2004-12-16 23:19:57 +00:00
njl
dad7ad8289
Inform users how to set throttling and cpu idling variables for the
...
power_profile rc script.
2004-12-16 22:21:21 +00:00
darrenr
e928230a0a
Using just m_pullup to get all of the interesting bits in packet into one
...
buffer doesn't work for ipv6 packets, so use m_defrag() here instead as an
easy drop-in replacement.
PR: 70399
2004-12-16 21:02:16 +00:00
das
0ca0cdb376
GC unused declaration
2004-12-16 20:40:49 +00:00
das
8daeb2e028
Cosmetic changes only:
...
- style
- remove unused variables
- de-support VAX
Inspired by: bin/42388
2004-12-16 20:40:37 +00:00
maxim
2b107b7efe
o The macro versions of sigemptyset(3), sigfillset(3), sigaddset(3),
...
sigdelset(3) and sigismember(3) were killed about five years ago.
o The functions (specifically sigismember(3)) could return -1 and
set errno.
PR: bin/75156
Obtained from: NetBSD
MFC after: 2 weeks
o Bump the date of the document.
2004-12-16 20:27:55 +00:00
ru
4b04260bb8
Previous revision didn't fix all cases. For example,
...
testing for variables that are always defined (e.g.,
"make -V CC") would still print a false warning. Fix
this by only passing a submake the MAKEOBJDIRPREFIX=*
argument if it was present. As a result, we loose
the check for -DMAKEOBJDIRPREFIX, or an esoteric
"MAKEOBJDIRPREFIX = foo" (with embedded spaces), but
these are unorthodox enough to not care about them.
The make(1) bug mentioned in the previous revision
was just fixed in make/main.c,v 1.109.
2004-12-16 19:55:57 +00:00
ru
de05db1167
Fix a long-standing bug when make(1) is passed the -V and
...
-f options in MAKEFLAGS environment variable, and some of
these options are also specified on the command line.
Thanks to: marcel
Reviewed by: harti
2004-12-16 19:46:50 +00:00
ps
0a2e8227c4
Change the NFS sillyrename convention so that we won't run out
...
of sillyrenames (which were limited to 58 per pid per directory,
for no good reason). The new format of sillyrenames looks like
.nfs.0000b31a.00d24.4
^^^^^^^^ ^^^^^
ticks pid
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Obtained from: Yahoo!
2004-12-16 19:28:37 +00:00
roam
057c46b46b
Describe the special meaning of the $ and ~ characters, and the fact
...
that you can get around it by double-quoting them.
PR: 42762
Submitted by: AIDA Shinra <aida-s@jcom.home.ne.jp>
Discussed with: brian
2004-12-16 16:59:19 +00:00