- devmatch_enable in rc.conf(5) was not gating the start of devmatch
- Use quietstart in devd/devmatch to suppress dozens of 'Cannot start'
messages and other spurious messages from rc.subr(8) that aren't
necessarily helpful.
Discussed with: imp
On very large memory systems 'size' can become 2GB or larger, resulting in a
negative value being formatted. Also, moea64_pteg_count is already a long, so
format it as such.
It is better to try allocate a big mbuf, than just silently drop a big
packet. A better solution could be reworking of libalias modules to be
able use m_copydata()/m_copyback() instead of requiring the single
contiguous buffer.
PR: 229006
MFC after: 1 week
Give up and remove the almost useless informational message reporting
that device not available exception occured while our state tracking
indicates the current CPU has FPU context loaded for the current
thread.
It seems that this is recurring bug with some VM monitors.
Sponsored by: The FreeBSD Foundation
Four functions nfscl_reqstart(), nfscl_fillsattr(), nfsm_stateidtom()
and nfsmnt_mdssession() are now called from within the nfsd.
As such, they needed to be moved from nfscl.ko to nfscommon.ko so that
nfsd.ko would load when nfscl.ko wasn't loaded.
Reported by: herbert@gojira.at
It is possible that ifma_protospec becomes NULL in this function for
some entry, but it is still referenced and thus it will not unlinked
from the list. Then "restart" condition triggers and this entry with
NULL ifma_protospec will lead to page fault.
PR: 228982
This controller have a special mode for RX to help with smbus-like transfer
when the controller will automatically send the slave address, register address
and read the data. Use it when possible.
The same mode for TX is describe is the datasheet but is broken and have been
since ~10 years of presence of this controller in RockChip SoCs.
Attach this driver early at we need it to communicate with the PMIC early in the
boot.
Do not hook it to the kernel build for now.
Add driver for the designware ethernet controller found in some RockChip SoCs.
The driver still rely on a lot of things setup by the bootloader like clocks
and phy mode.
But since netbooting is the only/easiest way to boot rockchip board at the
moment add the driver so other people can test/dev on thoses boards.
This was omitted in r334112 and r334996 which cause the PLL to not correctly
reparent, leaving the armclk to be derived from the APLL instead of the NPLL.
The arm core clock is now correctly set to 600Mhz via the assigned-clock present
in the DTB.
RockChip PLL have two modes controlled by a register, a "slow mode" (the
default one) where the frequency is derived from the 24Mhz oscillator on the
board, and a "normal" one when the pll take it's input from the real PLL output.
Default the mode to normal for all the PLLs.
This is the only node we are interested in so do not waste time to test
creating device that will be either unused or fail as most of the nodes
don't have a compatible string.
Rack with respect to its handling of TCP Fast Open. Several
fixes all related to TFO are included in this commit:
1) Handling of non-TFO retransmissions
2) Building the proper send-map when we are doing TFO
3) Dealing with the ack that comes back that includes the
SYN and data.
It appears that with this commit TFO now works :-)
Thanks Larry for all your help!!
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D15758
Implement MK_NVME now that the expression for where NVMe is
complicated. Default it to "yes" for x86 and powerpc64 and
no everywhere else. Use it in camcontrol to define WITH_NVME
for those platforms where we support nvme.
This should fix the newly introduced nvme files to camcontrol
which were building everywhere.
Pointy Hat To: imp
Sponsored by: Netflix
Broken in r334514
sysctlbyname("vfs.zfs.compressed_arc_enabled", ...) would return ENOMEM
while trying to read the sysctl (a boolean_t) into a bool, which is too small.
Reviewed by: jhb (on irc)
Sponsored by: Klara Systems
Both ATA and NVME have an identify command. They are completely
different, but to the user they are the same. Leverage nvmecontrol's
print_controller code to provide that functionality to camcontrol
identify. Query the path to see what kind of protocol it supports, and
send the most appropriate command down. Refactor nvme_print_dev a
little to make it easy to get the nvme cdata.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15371
Rename print_controller to nvme_print_controller. Put it in its
own file for easy inclusion. Move util.c to be nc_util.c to not
conflict with camcontrol. add nvecontrol_ext.h to define shared
interfaces.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15371
