ultimate trigger for the follow-up fixes in revisions 1.78, 1.80,
1.81 and 1.82 of trap.c. I was simply too pre-occupied with the
gateway page and how it blurs kernel space with user space and
vice versa that I couldn't see that it was all a load of bollocks.
It's not the IP address that matters, it's the privilege level that
counts. We never run in user space with lifted permissions and we
sure can not run in kernel space without it. Sure, the gateway page
is the exception, but not if you look at the privilege level. It's
user space if you run with user permissions and kernel space otherwise.
So, we're back to looking at the privilege level like it should be.
There's no other way.
Pointy hat: marcel
prototypes of cpu_halt(), cpu_reset() and swi_vm() from md_var.h to
cpu.h. This affects db_command.c and kern_shutdown.c.
ia64: move all MD prototypes from cpu.h to md_var.h. This affects
madt.c, interrupt.c and mp_machdep.c. Remove is_physical_memory().
It's not used (vm_machdep.c).
alpha: the MD prototypes have been left in cpu.h with a comment
that they should be there. Moving them is left for later. It was
expected that the impact would be significant enough to be done in
a seperate commit.
powerpc: MD prototypes left in cpu.h. Comment added.
Suggested by: bde
Tested with: make universe (pc98 incomplete)
Sign extension happens after the shift, not before so that boundary
cases like 0x40000000 will not be caught properly.
Instead, right shift ndirty. It is guaranteed to be a multiple of 8.
While here, do some manual code motion and code commoning.
Range check bug pointed out by: iedowse
that were on the kernel stack into account. For now we write them
out to the register stack of the process before creating the dump.
This however is not the final solution. The problem is that we may
invalidate the coredump by overwriting vital information due to an
invalid backing store pointer. Instead we need to write the dirty
registers to an unused region of VM which will result in a seperate
segment in the coredump. For now we can at least get to all the
registers from a coredump.
and the move to control register to avoid dependency violations when
these functions are used. Note that explicit data and instruction
serialization also need to be in a subsequent instruction group.
This too requires that we have an igrp break here.
PT_SETKSTACK. These requests allow the tracing process to access the
dirty registers of the traced process that are on the kernel stack.
Note that there's currently no way to access the rnat register for
those dirty registers that are not (yet) covered by a nat collection
point. The interface for this is still being slept on.
Also note that implied by these requests is the division of work:
The tracing process has to keep track of where registers are spilled
and is responsible to figure out where the NaT bit of the stacked
registers are at any time during the execution of the traced process.
The kernel provides the interfaces but will not abstract the fact
that the register stack can be split. This model does not follow
the approach taken in Linux where PT_PEEK and PT_POKE deals with
this automagically.
in user space or kernel space. VM_MIN_KERNEL_ADDRESS starts after the
gateway page, which means that improper memory accesses to the gateway
page while in user mode would panic the kernel. Use VM_MAX_ADDRESS
instead. It ends before the gateway page. The difference between
VM_MIN_KERNEL_ADDRESS and VM_MAX_ADDRESS is exactly the gateway page.
move to ar.rsc. The RSE must be in enforced lazy mode when writing
to RSE modifyable registers. In this case we restore the RSE NaT
collection register ar.rnat. I have seen 2 general exception faults
on pluto1 now that indicate that the move to ar.rsc has already
happened prior to the move to ar.rnat, meaning that the RSE is not
in enforced lazy mode anymore. The ia64 dependency and instruction
ordering rules seem to allow having both registers written to in
the same instruction group, provided ar.rsc is written to later than
ar.rnat (based on the ordering semantics). It appears that we may
be pushing our luck. For now, put them in seperate cycles (by means
of the instruction group break). If we ever get a general exception
fault on the move to ar.rnat again, we have definite proof that
something else is fishy.
o Differentiate between CPU family and CPU model. There are multiple
Itanium 2 models and it's nice to differentiate between them.
o Seperately export the CPU family and CPU model with sysctl.
o Merced is the only model in the Itanium family.
o Add Madison to the Itanium 2 family. We already knew about McKinley.
o Print the CPU family between parenthesis, like we do with the i386
CPU class.
My prototype now identifies itself as:
CPU: Merced (800.03-Mhz Itanium)
pluto1 and pluto2 will eventually identify themselves as:
CPU: McKinley (900.00-Mhz Itanium 2)
magic from exec_setregs(). In set_mcontext() we now also don't have
to worry that we entered the kernel with more that 512 bytes of
dirty registers on the kernel stack. Note that we cannot make any
assumptions anymore WRT to NaT collection points in exec_setregs(),
so we have to deal with them now.
when we create contexts. The meaning of the flags are documented in
<machine/ucontext.h>. I only list them here to help browsing the
commit logs:
_MC_FLAGS_ASYNC_CONTEXT
_MC_FLAGS_HIGHFP_VALID
_MC_FLAGS_KSE_SET_MBOX
_MC_FLAGS_RETURN_VALID
_MC_FLAGS_SCRATCH_VALID
Yes, _MC_FLAGS_KSE_SET_MBOX is a hack and I'm proud of it :-)
o For trap-based upcalls the argument (the kse_mailbox) to
the UTS must be written onto the kernel stack, not the
user stack. While here, deal with the fact that we may
be at a NaT collection point.
path into the kernel. Normally it's due to a syscall, but one can
also be created as the result of a clock interrupt (for example).
This now even more looks like exec_setregs().
While here, add an assert that we don't expect more than 8KB of
dirty registers on the kernel stack.
unconditionally restore ar.k7 (kernel memory stack) and ar.k6
(kernel register stack). I don't know what I was smoking then,
but if you unconditionally restore ar.k6, you also want to
compute its value unconditionally. By having the computation
predicated and dependent on whether we return to user mode, we
would end up writing junk (= invalid value for ar.bspstore) if
we would return to kernel mode. But the whole point of the
unconditional restoration was that there is a grey area where
we still need to have ar.k6 restored. If we restore with a junk
value, we would end up wedging the machine on the next interrupt.
So, unconditionally calculate the value we unconditionally write
to ar.k6.
o The previous braino was found while making the following change:
We used to clear the lower 9 bits of the value we write to ar.k6.
The meaning being that we know that the kernel register stack is
at least 512 byte aligned and simply clearing the lower 9 bits
allows us to return to a context of which we don't have dirty
registers on the kernel stack, even though the context that
entered the kernel does have dirty registers on the kernel stack.
By masking-off the lower bits, we correctly obtain the base of
the register stack without having to worry that we didn't actually
reached the base while unwinding it.
The change is to mask off the lower 13 bits, knowing that the
kernel register stack is always 8KB aligned. The advantage is that
we don't have to worry anymore if there's more than 512 bytes of
dirty registers on the kernel stack. A situation that frequently
occurs. In exec_setregs() in machdep.c:1.147 or older, we had to
deal with that situation by copying the active portion of the
register stack down in multiples of 512 bytes. Now that we mask off
the lower 13 bits we don't have to do that at all. Contemporary
IPF processors have a register file that can hold up to 96 stacked
registers (=784 bytes [incl. 2 NaT collections]). With no indication
that register files grow beyond a couple of hundred registers, we
should not have to worry about it anymore... and yes, 640KB is
enough for everybody :-)
This change helps setcontext(2) and cpu_set_upcall_kse() in that
they can return to completely different contexts without having to
mess with the kernel stack. Of course exec_setregs() doesn't need
to do that anymore as well.
need this for swapcontext(), KSE upcalls initiated from ast()
also need to save them so that we properly return the syscall
results after having had a context switch. Note that we don't
use r11 in the kernel. However, the runtime specification has
defined r8-r11 as return registers, so we put r11 in the context
as well. I think deischen@ was trying to tell me that we should
save the return registers before. I just wasn't ready for it :-)
o The EPC syscall code has 2 return registers and 2 frame markers
to save. The first (rp/pfs) belongs to the syscall stub itself.
The second (iip/cfm) belongs to the caller of the syscall stub.
We want to put the second in the context (note that iip and cfm
relate to interrupts. They are only being misused by the syscall
code, but are not part of a regular context).
This way, when the context is switched to again, we return to
the caller of setcontext(2) as one would expect.
o Deal with dirty registers on the kernel stack. The getcontext()
syscall will flush the RSE, so we don't expect any dirty registers
in that case. However, in thread_userret() we also need to save
the context in certain cases. When that happens, we are sure that
there are dirty registers on the kernel stack.
This implementation simply copies the registers, one at a time,
from the kernel stack to the user stack. NAT collections are not
dealt with. Hence we don't preserve NaT bits. A better solution
needs to be found at some later time.
We also don't deal with this in all cases in set_mcontext. No
temporay solution is implemented because it's not a showstopper.
The problem is that we need to ignore the dirty registers and we
automaticly do that for at most 62 registers. When there are more
than 62 dirty registers we have a memory "leak".
This commit is fundamental for KSE support.
user space region. Hence, we need to test if 5 is greater than the
region; not greater equal.
This bug caused us to call ast() while interrupting kernel mode.
set in cpu_critical_fork_exit() anymore.
- As far as I can tell, cpu_thread_link() has never been used, not even
when it was originally added, so remove it.
o Remove alpha specific timer code (mc146818A) and compiled-out
calibration of said timer.
o Remove i386 inherited timer code (i8253) and related acquire and
release functions.
o Move sysbeep() from clock.c to machdep.c and have it return
ENODEV. Console beeps should be implemented using ACPI or if no
such device is described, using the sound driver.
o Move the sysctls related to adjkerntz, disable_rtc_set and
wall_cmos_clock from machdep.c to clock.c, where the variables
are.
o Don't hardcode a hz value of 1024 in cpu_initclocks() and don't
bother faking a stathz that's 1/8 of that. Keep it simple: hz
defaults to HZ and stathz equals hz. This is also how it's done
for sparc64.
o Keep a per-CPU ITC counter (pc_clock) and adjustment (pc_clockadj)
to calculate ITC skew and corrections. On average, we adjust the
ITC match register once every ~1500 interrupts for a duration of
2 consequtive interruprs. This is to correct the non-deterministic
behaviour of the ITC interrupt (there's a delay between the match
and the raising of the interrupt).
o Add 4 debugging sysctls to monitor clock behaviour. Those are
debug.clock_adjust_edges, debug.clock_adjust_excess,
debug.clock_adjust_lost and debug.clock_adjust_ticks. The first
counts the individual adjustment cycles (when the skew first
crosses the threshold), the second counts the number of times the
adjustment was excessive (any non-zero value is to be considered
a bug), the third counts lost clock interrupts and the last counts
the number of interrupts for which we applied an adjustment
(debug.clock_adjust_ticks / debug.clock_adjust_edges gives the
avarage duration of an individual adjustment -- should be ~2).
While here, remove some nearby (trivial) left-overs from alpha and
other cleanups.
interrupting user mode. The net effect of this bug is that a clock
interrupt does not cause rescheduling and processes are not
preempted. It only takes a "while (1);" to render the machine
useless.
This bug was introduced by the context changes and EPC syscall code.
Handling of ASTs was moved to C for clarity and ease of maintenance,
but was not added for the external interrupt case.
This needs to be revisited. We now have calls to do_ast() in trap(),
break_syscall() and ivt_External_Interrupt(). A single call in
exception_restore covers these 3 places without duplication. This
is where we handled ASTs prior to the overhaul, except that the
meat has been moved to do_ast(), a C function. This was the goal
to begin with.
Pointy hat: marcel
created not only with UMA_ZONE_VM but also with UMA_ZONE_NOFREE. In
the i386 case in particular, the pmap code would hook a special
page allocation routine that allocated from kernel_map and not kmem_map,
and so when/if the pageout daemon drained the zones, it could actually
push out slabs from the PV ENTRY zone but call UMA's default page_free,
which resulted in pages allocated from kernel_map being freed to
kmem_map; bad. kmem_free() ignores the return value of the
vm_map_delete and just returns. I'm not sure what the exact
repercussions could be, but it doesn't look good.
In the PAE case on i386, we also set-up a zone in pmap, so be
conservative for now and make that zone also ZONE_NOFREE and
ZONE_VM. Do this for the pmap zones for the other archs too,
although in some cases it may not be entirely necessarily. We'd
rather be safe than sorry at this point.
Perhaps all UMA_ZONE_VM zones should by default be also
UMA_ZONE_NOFREE?
May fix some of silby's crashes on the PV ENTRY zone.
memory in bus_dmamem_alloc(). This is possible now that
contigmalloc() supports the M_ZERO flag.
- Remove the locking of Giant around calls to contigmalloc() since
contigmalloc() now grabs Giant itself.
switching anymore, so there's no need to save and restore GP. This
change breaks threaded applications linked against libc_r. Pull the
tier 2 card again: relink. This will link against libthr instead.
a non-standard construct. Instead, redefine struct _ia64_fpreg as a
union and put a long double in it. On ia64 and for LP64, this is
defined by the ABI to have 16-byte alignment. For ILP32 a long double
has 4-byte alignment, but we don't support ILP32.
Note that the in-memory image of a long double does not match the in-
memory image of spilled FP registers. This means that one cannot use
the fpr_flt field to interpet the bits. For this reason we continue
to use an aggregate type.
but this just created a weird inconsistency when porting gdb(1).
Instead, we name each high FP register seperately, like we do for
all the other registers.
them again afterwards. This fixes a disabled FP fault while in the FPSWA
handler.
While here, merge the FP fault and FP trap handling code to reduce code
duplication. Where code was different, it was not sure it should be.
Trigger case: ports/math/atlas
our unwind information for functions that are entry points into the
kernel. When stepping to the next frame, the unwinder will let us
know when sych a marker was encountered. We use this to stop the
current unwind session, query the trapframe and restart a new
unwind session based on the new trapframe.
The implementation is a bit sloppy, but at this time there are
bigger fish to fry.
to get a stacktrace. This does not work even with M_NOWAIT when we
have WITNESS and is generally a bad idea (pointed out by bde@). We
allocate an 8K heap for use by the unwinder when ddb is active. A
stack trace roughly takes up half of that in any case, so we have
some room for complex unwind situations. We don't want to waste too
much space though. Due to the nature of unwinding, we don't worry
too much about fragmentation or performance of unwinding while in
the debugger. For now we have our own heap management, but we may
be able to leverage from existing code at some later time.
While here:
o Make sure we actually free the unwind environment after unwinding.
This fixes a memory leak.
o Replace Doug's license with mine in unwind.c and unwind.h. Both
files don't have much, if any, of Doug's code left since the EPC
syscall overhaul and the import of the unwinder.
o Remove dead code.
o Replace M_NOWAIT with M_WAITOK for all remaining malloc() calls.
order to avoid the overhead of later page faults. In general, it
implements two cases: one for vnode-backed objects and one for
device-backed objects. Only the device-backed case is really
machine-dependent, belonging in the pmap.
This commit moves the vnode-backed case into the (relatively) new
function vm_map_pmap_enter(). On amd64 and i386, this commit only
amounts to code rearrangement. On alpha and ia64, the new machine
independent (MI) implementation of the vnode case is smaller and more
efficient than their pmap-based implementations. (The MI
implementation takes advantage of the fact that objects in -CURRENT
are ordered collections of pages.) On sparc64, pmap_object_init_pt()
hadn't (yet) been implemented.
o use a mutex to protect the bounce pages structure.
o use a SYSINIT function to initialize the bounce pages structures
and thus avoid a race condition in alloc_bounce_pages().
o add support for the BUS_DMA_NOWAIT flag in bus_dmamap_load().
o remove obsolete splhigh()/splx() calls.
o remove printf() about incorrect locking in busdma_swi() and sync
busdma_swi() with the one of the alpha backend.
o use __FBSDID.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma. At the moment, this is used for the
asynchronous busdma_swi and callback mechanism. Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg. dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create(). The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.
sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms. The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.
If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.
Reviewed by: tmm, gibbs
implementation of a largely MI pmap_object_init_pt() for vnode-backed
objects. pmap_enter_quick() is implemented via pmap_enter() on sparc64
and powerpc.
- Correct a mismatch between pmap_object_init_pt()'s prototype and its
various implementations. (I plan to keep pmap_object_init_pt() as
the MD hook for device-backed objects on i386 and amd64.)
- Correct an error in ia64's pmap_enter_quick() and adjust its interface
to match the other versions. Discussed with: marcel
function behaves correctly in principle, but is not expected to be
100% complete. In any case, with this commit we have KSE ported
enough to start runtime testing with threaded applications and fix
whatever bugs or omissions we encounter. Yay!
bus_dma async callback scheme. Note that sparc64 does not seem to do
async callbacks. Note that ia64 callbacks might not be MPSAFE at the
moment. Note that powerpc doesn't seem to do async callbacks due to
the implementation being incomplete.
Reviewed by: mostly silence on arch@
to the machine-independent parts of the VM. At the same time, this
introduces vm object locking for the non-i386 platforms.
Two details:
1. KSTACK_GUARD has been removed in favor of KSTACK_GUARD_PAGES. The
different machine-dependent implementations used various combinations
of KSTACK_GUARD and KSTACK_GUARD_PAGES. To disable guard page, set
KSTACK_GUARD_PAGES to 0.
2. Remove the (unnecessary) clearing of PG_ZERO in vm_thread_new. In
5.x, (but not 4.x,) PG_ZERO can only be set if VM_ALLOC_ZERO is passed
to vm_page_alloc() or vm_page_grab().
PCB contains FP registers, whose alignment must be 16 bytes at least.
Since the PCB pointed to by pc_pcb is immediately after the PCPU
itself, round-up the size of thge PCPU to a multiple of 16 bytes. The
PCPU is page aligned.
This fixes a misalignment trap caused by stopping a CPU in a SMP
kernel, such as been done when entering the debugger.
Reported by: Alan Robinson <alan.robinson@fujitsu-siemens.com>
the caller assumes this to not happen by means of performing an
indirection without checking the return value. Add KASSERTs to
force a kernel with INVARIANTS to panic. This is a short-term
measure. The pmap code is scheduled to be overhauled.
to deliver a signal and the RSE backing store has been exhausted or
the backing store pointer has been clobbered, we need to make sure
we call userret() and do_ast() when we exit from trap(). Not adjusting
the local variable 'user' in this case will prevent the faulty process
from being terminated and we end up in an infinite fault repetition.
Faulty process provided by: bento
always kernel space. It should be treated as user space when run with
user privileges (which is the case for the signal trampolines). This
fixes its only use in a KASSERT in subr_trap.c.
got fixed two weeks after the ia64 version was copied from the alpha
version (see rev 1.32 of sys/alpha/alpha/mem.c). As such, we were
missing the same continue as on alpha.
While here, add a default case for the device minor switch and do
some general style(9) cleanups.
WARNING: this file still has bugs. When reading from region 6 or
region 7, we don't validate the physical address. One can trivially
cause a machine check by trying to read from address 0xFFFFFFFFFFFFFFF0
or something that uses the unimplemented physical address bits.
Reported by: Alan Robinson <alan.robinson@fujitsu-siemens.com>
we were passing in a void* representing the PCB of the parent thread.
Now we pass a pointer to the parent thread itself.
The prime reason for this change is to allow cpu_set_upcall() to copy
(parts of) the trapframe instead of having it done in MI code in each
caller of cpu_set_upcall(). Copying the trapframe cannot always be
done with a simply bcopy() or may not always be optimal that way. On
ia64 specifically the trapframe contains information that is specific
to an entry into the kernel and can only be used by the corresponding
exit from the kernel. A trapframe copied verbatim from another frame
is in most cases useless without some additional normalization.
Note that this change removes the assignment to td->td_frame in some
implementations of cpu_set_upcall(). The assignment is redundant.
A previous call to cpu_thread_setup() already did the exact same
assignment. An added benefit of removing the redundant assignment is
that we can now change td_pcb without nasty side-effects.
This change officially marks the ability on ia64 for 1:1 threading.
Not tested on: amd64, powerpc
Compile & boot tested on: alpha, sparc64
Functionally tested on: i386, ia64
o Use pcb and tf for the new pcb and the new trapframe and use pcb0
for the old (current) pcb. The mix of pcb, pcb2 and tf was slightly
confusing.
o Don't define td->td_frame here. It has already been set previously
by cpu_thread_setup. Add a KASSERT to make sure pcb and tf are both
non-NULL.
o Make sure the number of dirty registers is 0 for the new thread.
There are no user registers on the backing store because we heven't
enter userland yet.
gateway page is considered kernel space, we can panic when we should
only SIGSEGV. Hence, add the additional constraint that for page
faults we also require running with kernel privileges. The gateway
page is the only kernel code running with user privileges, iso this
is a correct way to exclude the gateway page from kernel land.
We do not currently exclude the gateway page for other faults as it
is not always the right way to do it. Further tuning will happen on
a case by case bases.
thr_create(2). This implementation is so far only compile tested.
But since this is also the last of the functions required to
support libthr, we're now functionally complete (for some weird
definition of functionally; and complete). Runtime testing can
commence.
sigreturn(), we cheat and assume the preserved registers are still
on-chip and unmodified. This is actually the case, but more by accident
than by design. We need to use unwinding eventually or explicitly
compile the kernel in a way that the compiler steers clear from using
the preserved registers completely.
o The SDM states that flushing the RSE in the cycle prior to the
call to ia32 code yields the best performance. We don't really
care to much about performance here, but we do the same anyway.
I'm being paranoia and conservative here.
o Only initialize the ia32 state registers, not the registers used
as scratch by the ia32 engine. This saves a couple of loads from
the trapframe, but also helps debugging: we don't clobber useful
debugging data (engineering hints :-)
o Make sure all general registers constituting ia32 state have been
initialized. If there's no useful to be loaded from the trapframe,
clear the register. This avoids accidentally leaking NaT bits.
o Make sure we set ar.k6 prior to clobbering ar.bspstore and also
set ar.k7 prior to setting sp. This fixes a race seen for ia64
native code as well (and previously fixed too).
backing store before we discard them. It is possible that we
enter the kernel (due to an execve in this case) with a lot of
dirty user registers and that the RSE has only partially spilled
them (to make room for new frames). We cannot move the backing
store pointer down (to discard user registers) when not all of
the user registers are on the backing store.
So, we flush the register stack IFF this happens. Unconditionally
doing the flush is too costly, because the condition in which we
need to flush is very rare.
This change appears to fix the SIGSEGV that sometimes happen for
newly executed processes and so far also appears to fix the last
of the corruption. It is possible, although not likely, that this
change prevents some other bug from happening, even though it is
itself not a fix. Hence the uncertainty. We'll know in a couple
of months I guess :-)
The current name is confusing, because it indicates to
the client that a bus_dmamap_sync() operation is not
necessary when the flag is specified, which is wrong.
The main purpose of this flag is to hint the underlying
architecture that DMA memory should be mapped in a coherent
way, but the architecture can ignore it. But if the
architecture does supports coherent mapping of memory, then
it makes bus_dmamap_sync() calls cheap.
This flag is the same as the one in NetBSD's Bus DMA.
Reviewed by: gibbs, scottl, des (implicitly)
Approved by: re@ (jhb)
BUS_DMASYNC_ definitions remain as before. The does not change the ABI,
and reverts the API to be a bit more compatible and flexible. This has
survived a full 'make universe'.
Approved by: re (bmah)
used by DDB and we cannot know in advance whether it's save to
sleep. It often enough isn't. We may want to pre-allocate space
to cover the most common cases without having to use malloc at
all, but that requires some analysis. We leave that for later.
Approved by: re@ (blanket)
o If the address was not within user space we jumped to fusufault
where we would clear pcb_onfault and return 0. There are two
bugs here:
1. We never got to the point where we assigned the address of
pcb_onfault to r15, which means that we would clobber some
random memory location, including I/O space or ROM.
2. We're supposed to return -1 on error.
o Make sure we have proper memory ordering for setting pcb_onfault,
doing the memory access to user space and clearing pcb_onfault.
For the fu* family of functions this means that we need a mf
instruction, because we don't have acquire semantics on stores
and release semantics on loads (hence st;ld cannot be ordered
without intermediate mf).
While here, implement casuptr() so that we are a (small) step
closer to supporting libthr and deobfuscate the non-implementation
of {f|s}uswintr.
Approved by: re@ (blanket)
VM_ALLOC_INTERRUPT to VM_ALLOC_SYSTEM. There was no mention of
this in commit log as it was considered harmless. Guess what:
it does harm. WITNESS showed that we can not safely grab the
page queue lock in vm_page_alloc() in all cases as we may have
to sleep on it. Revert the request to VM_ALLOC_INTERRUPT to
circumvent this. We panic if vm_page_alloc returns 0. I'm not
entirely happy about this, but we have bigger fish to fry.
Approved by: re@ (blanket)
kernel's VA regions, we cannot limit the use of break-based
syscalls to user mode only. The signal trampolines are in the
gateway page, which is mapped into the process address space in
region 5 and thus is kernel space.
We don't special case the gateway page here. Allow break-based
syscalls from anywhere in the kernel VA space.
Approved by: re@ (blanket)
to userland with interrupts disabled until we restore PSR. However,
it has been observed that interrupts do actually happen before they
are enabled again. This is a bit surprising and I don't know yet
what's going on exactly. Nevertheless, the code was not crafted
carefully enough to allow interrupts to happen and we could
clobber the kernel stack of another thread when interrupts did
happen.
This is what happens: we restore the (memory) stack pointer (sp)
and the register stack base prior to restoring ar.k6 and ar.k7.
This is not a problem if interrupts don't happen between setting
sp/ar.bspstore and ar.k6/ar.k7. Alas, interrupts can happen.
Since sp/ar.bspstore already point to the userland stacks, we
need to switch to the kernel stack in interrupt. However, ar.k6
and ar.k7 have not been set, which means that we were switching
to some unrelated kstack and happily clobbered the trapframe
present there if the thread to which the kstack belonged was
in kernel mode or otherwise we could have our trapframe clobbered
if that other thread enters the kernel. Nasty either way.
We now carefully restore ar.k6 prior to restoring ar.bspstore and
likewise for ar.k7 and sp. All we need is the guarantee that an
interrupt does not clobber ar.k6 or ar.k7 before we're back in
userland. That has been achieved by restoring ar.k6/ar.k7
unconditionally (see exception.s)
While here, remove the disabling of interrupts on EPC entry. It
was added as a way to "resolve" the crashes until it was understood
what was going on. I think I achieved the latter, so we can remove
the patch. Note that setting up a trapframe with interrupts
enabled has it's own share of corner cases, but it's better to
properly fixed those than to keep a mostly wrong patch around
because we're afraid to remove it...
Approved by: re@ (blanket)
PSR only to achieve setting PSR.i back to it's previous value. It
makes it impossible to change any of the 30+ other unrelated bits
when done between intr_disable() and intr_restore(). That's bad.
Instead have intr_disable() return 1 when interrupts were previously
enabled and 0 otherwise and only enable interrupts in intr_restore()
when given a non-0 value.
This change specifically disallows using intr_restore() to disable
interrupts. The reason is simple: interrupts only need to be restored
after they are being disabled, which means that intr_restore() is
called with interrupts disabled and we only need to enable them if
they were previously enabled.
This change does not fix any bugs, other than that it bugged me...
Approved by: re@ (blanket)
and user mode. We need to take into account that the EPC syscall path
introduces a grey area in which one can argue either way, including a
third: neither.
We now use the region in which the IP address lies. Regions 5, 6 and 7
are kernel VA regions and if the IP lies any any of those regions we
assume we're in kernel mode. Hence, we can be in kernel mode even if
we're not on the kernel stack and/or have user privileges. There're
gremlins living in the twilight zone :-)
For the EPC syscall path this particularly means that the process
leaves user mode the moment it calls into the gateway page. This
makes the most sense because from a process' point of view the call
represents a request to the kernel for some service and that service
has been performed if the call returns. With the metric we picked,
this also means that we're back in user mode IFF the call returns.
Approved by: re@ (blanket)
when returning from an interrupt. Both registers are used on interrupt
to switch to the right kernel stack, but other than that they are not
used. This means we only have to make sure they contain proper values
while in user mode. As such, we conditionally restored these registers
based on whether we returned to userland or not. A nice property of
conditionally restoring ar.k6 and ar.k7 is that it introduces two
invariants: ar.k6 always points to the bottom of the kernel stack and
ar.k7 always points to the top of the kernel stack (immediately below
the PCB we have there).
However, the EPC syscall path introduces an irregularity: there's no
"thin red line" between user and kernel. There's a grey area that's a
couple of instructions wide. Any interruption in that grey area is
bound to see an inconsistent state. One such state is that we're in
kernel space for all practical purposes, but we still need to have
ar.k6 and ar.k7 restored as if we're in userland.
Thus: restore ar.k6 and ar.k7 unconditionally at the cost of losing
a valuable invariant. Both registers now hold the extend of the
usable portion of the kernel stack at any interrupt nesting, which
when in userland mean the bottom and the top of the kstack.
On alpha, PAL is involved in context management and after wiring
the CPU (in alpha_init()) a context switch was performed to tell
PAL about the context. This was bogusly brought over to ia64
where it introduced bugs, because we restored the context from
a mostly uninitialized PCB.
The cleanup constitutes:
o Remove the unused arguments from ia64_init().
o Don't return from ia64_init(), but instead call mi_startup()
directly. This reduces the amount of muckery in assembly and
also allows for the next bullet:
o Save our currect context prior to calling mi_startup(). The
reason for this is that many threads are created from thread0
by cloning the PCB. By saving our context in the PCB, we have
something sane to clone. It also ensures that a cloned thread
that does not alter the context in any way will return to
the saved context, where we're ready for the eventuality with
a nice, user unfriendly panic().
The cleanup fixes at least the following bugs:
o Entering mi_startup() with the RSE in enforced lazy mode.
o Re-execution of ia64_init() in certain "lab" conditions.
While here, add proper unwind directives to __start() so that
the unwind knows it has reached the bottom of the (call) stack.
Approved by: re@ (blanket)
When interrupting a kernel context, we don't need to switch stacks
(memory nor register). As such, we were also not restoring the
register stack pointer (ar.bspstore). This, however, fails to be
valid in 1 situation: when we interrupt a register stack switch as
is being done in restorectx(). The problem is that restorectx()
needs to have ar.bsp == ar.bspstore before it can assign the new
value to ar.bspstore. This is achieved by doing a loadrs prior to
assigning to ar.bspstore. If we take an interrupt in between the
loadrs and the assignment and we don't make sure we restore the
ar.bspstore prior to returning from the interrupt, we switch
stacks with possibly non-zero dirty registers, which means that
the new frame pointer (ar.bsp) will be invalid.
So, instead of jumping over the restoration of the register frame
pointer and related registers, we conditionalize it based on whether
we return to kernel context or user context. A future performance
tweak is possible by only restoring ar.bspstore when returning to
kernel mode *and* when the RSE is in enforced lazy mode. One cannot
assume ar.bsp == ar.bspstore if the RSE is not in enforced lazy mode
anyway.
While here (well, not quite) don't unconditionally assign to
ar.bspstore in exception_save. Only do that when we actually switch
stacks. It can only harm us to do it unconditionally.
Approved by: re@ (blanket)
register stack. There's nothing really wrong with flushing before
putting the RSE in enforced lazy mode, provided you don't depend on
ar.bspstore being equal to ar.bsp when the RSE has been put in
enforced lazy more. The small window between the flush and setting
the RSE may be sufficient to have the RSE eagerly increase the dirty
region (and hence cause ar.bspstore != ar.bsp) or have an interrupt
that may even get the laziest RSE to do something.
Anyway: we don't depend on ar.bspstore being equal to ar.bsp, so
nothing was and is broken. But the code was non-intuitive and
easily confuses. This is a source of future bugs.
Note: the advantage of not depending on ar.bspstore is that there's
some recilience against an interrupted flushrs. Clobbering is limited
to stacked register contents only, not to RSE address clobbering.
Approved: re@ (blanket)
failt and data access fault install the PTE in question into
the VHPT table. However, a post-increment was missing and we
wrote the raw PTE data into the pagesize/access key field.
This leaves a corrupt VHPT entry.
o While here, remove the explicit cache purge. Insertion into
the translation implicitly purges any overlapping entries.
o Make sure there's a cycle break between the itc and the rfi.
o Whitespace fixes.
a mutex. The only volatile chain operations are insertion and deletion
but since updating an existing PTE also updates the VHPT entry itself,
and we have the VHPT mutex in both other cases, we also lock when we
update an existing PTE even though no chain operation is involved.
Note that we perform the insertion and deletion careful enough that
we don't need to lock traversals. If we need to lock traversals, we
also need to lock from the exception handler, which we can't without
creating a trapframe.
We're now able to withstand a -j8 buildworld. More work is needed to
withstand Murphy fields. In other words: we still have a bogon...
Approved by: re@ (blanket)
- Fix visibilty test for LONG_BIT and WORD_BIT. `#if defined(__FOO_VISIBLE)'
is alays wrong because __FOO_VISIBLE is always defined (to 0 for
invisibility).
sys/<arch>/include/limits.h
sys/<arch>/include/_limits.h:
- Style fixes.
Submitted by: bde
Reviewed by: bsdmike
Approved by: re (scottl)
interrupted while writing into the VHPT table. While here, make sure
memory accesses a properly ordered. Tag invalidation must happen
first so that the hardware VHPT walker will not be able to match
this entry while we're updating it and we have to make sure the new
new tag gets written only after the PTE is completely updated.
Approved by: re (blanket)
previously committed cleared pcb_current_pmap prior to changing
the region registers, but that was removed before committing.
Since we don't normally (at all?) pass a NULL pointer, the bug
was mostly harmless. Fix it while I'm here...
I'm here because we need to have data serialization after writing
to the region registers. Not doing so was likely the cause of the
hangs we were experiencing. General exceptions in cpu_switch may
also be caused by the lack of serialization.
Approved by: re (blanket)
switching user regions (region 0-4) with schedlock. Avoid unnecessary
recursion on schedlock by moving the core functionality to another
function (pmap_switch()) where we assert schedlock is held. Turn
pmap_install() into a wrapper that grabs schedlock. This minimizes
the number of callsites that need to be changed.
Since we already have schedlock in cpu_switch() and cpu_throw(),
have them call pmap_switch() directly. These were also the only two
calls to pmap_install() outside pmap.c, so make pmap_install() static
and remove its prototype from pmap.h
Approved by: re (blanket)
prime objectives are:
o Implement a syscall path based on the epc inststruction (see
sys/ia64/ia64/syscall.s).
o Revisit the places were we need to save and restore registers
and define those contexts in terms of the register sets (see
sys/ia64/include/_regset.h).
Secundairy objectives:
o Remove the requirement to use contigmalloc for kernel stacks.
o Better handling of the high FP registers for SMP systems.
o Switch to the new cpu_switch() and cpu_throw() semantics.
o Add a good unwinder to reconstruct contexts for the rare
cases we need to (see sys/contrib/ia64/libuwx)
Many files are affected by this change. Functionally it boils
down to:
o The EPC syscall doesn't preserve registers it does not need
to preserve and places the arguments differently on the stack.
This affects libc and truss.
o The address of the kernel page directory (kptdir) had to
be unstaticized for use by the nested TLB fault handler.
The name has been changed to ia64_kptdir to avoid conflicts.
The renaming affects libkvm.
o The trapframe only contains the special registers and the
scratch registers. For syscalls using the EPC syscall path
no scratch registers are saved. This affects all places where
the trapframe is accessed. Most notably the unaligned access
handler, the signal delivery code and the debugger.
o Context switching only partly saves the special registers
and the preserved registers. This affects cpu_switch() and
triggered the move to the new semantics, which additionally
affects cpu_throw().
o The high FP registers are either in the PCB or on some
CPU. context switching for them is done lazily. This affects
trap().
o The mcontext has room for all registers, but not all of them
have to be defined in all cases. This mostly affects signal
delivery code now. The *context syscalls are as of yet still
unimplemented.
Many details went into the removal of the requirement to use
contigmalloc for kernel stacks. The details are mostly CPU
specific and limited to exception_save() and exception_restore().
The few places where we create, destroy or switch stacks were
mostly simplified by not having to construct physical addresses
and additionally saving the virtual addresses for later use.
Besides more efficient context saving and restoring, which of
course yields a noticable speedup, this also fixes the dreaded
SMP bootup problem as a side-effect. The details of which are
still not fully understood.
This change includes all the necessary backward compatibility
code to have it handle older userland binaries that use the
break instruction for syscalls. Support for break-based syscalls
has been pessimized in favor of a clean implementation. Due to
the overall better performance of the kernel, this will still
be notived as an improvement if it's noticed at all.
Approved by: re@ (jhb)
switching to kernel_pmap. The pmap is not special enough.
o Clear the active bit on the pmap we're switching out.
o Fix some nearby style(9) bugs.
Approved by: re@
kernel_vm_end in pmap_bootstrap. Don't delay the initialization until
we need to grow the kernel VM space. This BTW happens twice before
we enter either single- or multi-user mode. Don't adjust kernel_vm_end
while growing based on whether the KPT contains a non-NULL entry. We
trust kernel_vm_end to be correct and we make sure it's still correct
after growing.
Define virtual_avail and virtual_end in terms of VM_MIN_KERNEL_ADDRESS
and VM_MAX_KERNEL_ADDRESS (resp). Don't hardcode region knowledge.
o Limit the size of the region ID map to 64KB. This gives a bitmap
that is large enough to keep track of 2^19 numbers. The minimal map
size is 32KB. The reason we limit the map size is that processor
models may have implemented a 24-bit region ID, which would give
a 2MB bitmap while the maximum number of allocations is always
less than PID_MAX*5, which is less than 2^19.
o Allocate all region IDs up-front. The slight downside of reserving
more RIDs then a process needs (3 for ia64 native and 1 for ia32)
is preferable over the call to pmap_ensure_rid() where RIDs are
allocated on demand. On SMP systems this may lead to a race
condition.
o When allocating a region ID, don't use arc4random(). We're not
interested in randomness or uniform distribution across the
spectrum. We only need uniqueness. Random numbers may easily
collide when the number of allocated RIDs is high, creating a
possibly unbounded retry rate.
The advantage of using register sets is that you don't focus on each
register seperately, but instead instroduce a level of abstraction.
This reduces the chance of errors, and also simplifies the code.
The register sers form the basis of everything register.
The sets in this file are:
struct _special
contains all of the control related registers, such as instruction
pointer and stack pointer. It also contains interrupt specific registers
like the faulting address. The set is roughly split in 3 groups. The
first contains the registers that define a context or thread. This is
the only group that the kernel needs to switch threads. The second group
contains registers needed in addition to the first group needed to switch
userland threads. This group contains the thread pointer and the FP control
register. The third group contains those registers we need for execption
handling and are used on top of the first two groups.
struct _callee_saved, struct _callee_saved_fp
These sets contain the preserved registers, including the NaT after
spilling. The general registers (including branch registers) are
seperated from the FP registers for ptrace(2).
struct _caller_saved, struct _caller_saved_fp
These sets contain the scratch registers based on SDM 2.1, This means that
both ar.csd and ar.ccd are included here, even though they contain ia32
segment register descriptions. We keep seperate NaT bits for scratch and
preserved registers, because they are never saved/restored at the same
time.
struct _high_fp
The upper 96 FP registers that can be enabled/disabled seperately on
the CPU from the lower 32 FP registers. Due to the size of this set,
we treat them specially, even though they are defined as scratch
registers.
CVS ----------------------------------------------------------------------
save and restore "sets" of registers in various places.
The restorectx and swapctx functions are used by cpu_switch()
and deal with the special registers, as well as the preserved
registers.
The *callee_saved* functions are used to save and restore the
preserved registers (integer and floating-point). They are
useful for signal delivery and ptrace support.
The save_high_fp and restore_high_fp functions are used to
"load" and "unload" to and from the CPU as part of lazy context
switching.
The ia32 specific context functions have been kept with the ia32
code.
Approved by: re@ (blanket)
on the epc instruction. The epc instruction, given the permissions
of the page in which the epc is located, allows the privilege level
to be increased with little or no overhead. The previous privilege
level is recorded in the current frame marker and is restored by
a regular (function) return.
Since the epc instruction has to live in a page with non-standard
properties, we hardwire a "gateway" page in the address space. The
address of the gateway page is exported to userland in ar.k7. This
allows us to rewire the page without breaking the ABI.
The syscall stubs in libc are regular function calls that slightly
differ from the normal runtime. The difference is mostly to simplify
the stubs themselves by by moving some of the logic to the kernel.
The libc stubs call into the gateway page (offset 0), from where the
kernel trampolines to the code that sets up a minimal trapframe and
arranges to execute from the kernel stack.
The way back is basicly the same. The kernel returns to the gateway
page, whereby privilege is dropped, and jumps back to the syscall
stub.
Only the special registers are saved in the trapframe. None of the
scratch registers are preserved and since the kernel follows the
same runtime model, none of the preserved registers are saved.
Future enhancements can include the implementation of lightweight
syscalls, where kernel functions are performed without setting up
a trapframe. Good candidates are the *context syscalls for example.
Now that there's a gateway page from which code can be executed in
a non-privileged context, we also have the ideal place to put the
signal trampolines. By moving the signal trampolines from the user
stack to the gateway page, we open up the doors to unexecutable
stacks. The gateway page contains signal trampolines for both the
"legacy" break-based syscall code and the new and improved epc-
based syscall code.
Approved: re@ (blanket)
- Move struct sigacts out of the u-area and malloc() it using the
M_SUBPROC malloc bucket.
- Add a small sigacts_*() API for managing sigacts structures: sigacts_alloc(),
sigacts_free(), sigacts_copy(), sigacts_share(), and sigacts_shared().
- Remove the p_sigignore, p_sigacts, and p_sigcatch macros.
- Add a mutex to struct sigacts that protects all the members of the struct.
- Add sigacts locking.
- Remove Giant from nosys(), kill(), killpg(), and kern_sigaction() now
that sigacts is locked.
- Several in-kernel functions such as psignal(), tdsignal(), trapsignal(),
and thread_stopped() are now MP safe.
Reviewed by: arch@
Approved by: re (rwatson)
Remove DBL_DIG, DBL_MIN, DBL_MAX and their FLT_ counterparts, they
were marked for deprecation ever since SUSv1 at least.
Only define ULLONG_MIN/MAX and LLONG_MAX if long long type is
supported.
Restore a lost comment in MI _limits.h file and remove it from
sys/limits.h where it does not belong.
o do not use the in* and out* functions. These functions are used by
legacy drivers and thus must have ia32 compatible behaviour. Hence,
they need to have fences. Using these functions for newbus would
then pessimize performance.
o remove the conditional compilation of PIO and/or MEMIO support. It's
a PITA without having any significant benefit. We always support them
both. Since there are no I/O ports on ia64 (they are simulated by the
chipset by translating memory mapped I/O to predefined uncacheable
memory regions) the only difference between PIO and MEMIO is in the
address calculation. There should be enough ILP that can be exploited
here that making these computations compile-time conditional is not
worth it. We now also don't use the read* and write* functions.
o Add the missing *_8 variants. They were missing, although not missed.
It's for completeness.
o Do not add the fences that were present in the low-level support
functions here. We're using uncacheable memory, which means that
accesses are in program order. Change the barrier implementation
to not only do a memory fence, but also an acceptance fence. This
should more reliably synchronize drivers with the hardware. The
memory fence enforces ordering, but does not imply visibility (ie
the access does not necessarily have happened). This is what the
acceptance deals with.
cpufunc.h cleanup:
o Remove the low-level memory mapped I/O support functions. They are
not used. Keep the low-level I/O port access functions for legacy
drivers and add fences to ensure ia32 compatibility.
o Remove the syscons specific functions now that we have moved the
proper definitions where they belong.
o Replace the ia64_port_address() and ia64_memory_address() functions
with macros. There's a bigger change inline functions get inlined
when there aren't function callsi and the calculations are simply
enough to do it with macros.
Replace the one reference to ia64_memory address in mp_machdep.c to
use the macro.
syscall return values should be cleared. The system calls
getcontext() and swapcontext() want to return 0 on success
but these contexts can be switched to at a later time so
the return values need to be cleared in the saved register
sets. Other callers of get_mcontext() would normally want
the context without clearing the return values.
Remove the i386-specific context saving from the KSE code.
get_mcontext() is not i386-specific any more.
Fix a bad pointer in the alpha get_mcontext() code. The
context was being bcopy()'d from &td->tf_frame, but tf_frame
is itself a pointer, so the thread was being copied instead.
Spotted by jake.
Glanced at by: jake
Reviewed by: bde (months ago)
to get actual constant values. This is in preparation for machine/limits.h
retirement.
Discussed on: standards@
Submitted by: Craig Rodrigues <rodrigc@attbi.com> (*)
Modified by: kan
kern_sigprocmask() in the various binary compatibility emulators.
- Replace calls to sigsuspend(), sigaltstack(), sigaction(), and
sigprocmask() that used the stackgap with calls to the corresponding
kern_sig*() functions instead without using the stackgap.
instruction requires that a translation is present in the TC. This
may trigger a TLB miss and a subsequent call to vm_fault().
This implementation is deliberately non-inline for debugging and
profiling purposes. Partial or full inlining should eventually be
done.
Valuable insights by: jake
enum to an int and redefine the BUS_DMASYNC_* constants as
flags. This allows us to specify several operations in one
call to bus_dmamap_sync() as in NetBSD.
by allprison_mtx), a unique prison/jail identifier field, two path
fields (pr_path for reporting and pr_root vnode instance) to store
the chroot() point of each jail.
o Add jail_attach(2) to allow a process to bind to an existing jail.
o Add change_root() to perform the chroot operation on a specified
vnode.
o Generalize change_dir() to accept a vnode, and move namei() calls
to callers of change_dir().
o Add a new sysctl (security.jail.list) which is a group of
struct xprison instances that represent a snapshot of active jails.
Reviewed by: rwatson, tjr
of asserting that an mbuf has a packet header. Use it instead of hand-
rolled versions wherever applicable.
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
use it because we allocate a VHPT based on the size of the physical
memory and even if the allocated VHPT is 32KB, we don't use the in-
image section for it. Since the VHPT must be naturally aligned, we
save 48K on average (due to alignment).
Consequently, we start off with the VHPT disabled (it is assumed
the VHPT is disabled because the EFI loader runs without memory
address translation and thus has no need to setup the VHPT). It's
probably a good idea to explicitly disable the VHPT if we make the
use of the VHPT optional.
This avoids an immediate access bit fault when we serviced the dirty
bit fault in case the access bit is unset. This typically happens for
newly allocated memory that's being zeroed and thus very common.
