Commit Graph

240077 Commits

Author SHA1 Message Date
Justin Hibbits
9ffdae0fd7 powerpc: Fix cpufreq statement scoping
The second statements on the lines are not guarded by the `if' condition.
This triggers a warning with newer gcc.  It's relatively harmless given the
usage, but incorrect.  Instead, wrap the statements so they're properly
guarded.

Reported by:	powerpc64-gcc xtoolchain
MFC after:	1 week
2019-03-08 03:59:53 +00:00
Conrad Meyer
ab69c4858c Fortuna: Add Chacha20 as an alternative stream cipher
Chacha20 with a 256 bit key and 128 bit counter size is a good match for an
AES256-ICM replacement.

In userspace, Chacha20 is typically marginally slower than AES-ICM on
machines with AESNI intrinsics, but typically much faster than AES on
machines without special intrinsics.  ChaCha20 does well on typical modern
architectures with SIMD instructions, which includes most types of machines
FreeBSD runs on.

In the kernel, we can't (or don't) make use of AESNI intrinsics for
random(4) anyway.  So even on amd64, using Chacha provides a modest
performance improvement in random device throughput today.

This change makes the stream cipher used by random(4) configurable at boot
time with the 'kern.random.use_chacha20_cipher' tunable.

Very rough, non-scientific measurements at the /dev/random device, on a
GENERIC-NODEBUG amd64 VM with 'pv', show a factor of 2.2x higher throughput
for Chacha20 over the existing AES-ICM mode.

Reviewed by:	delphij, markm
Approved by:	secteam (delphij)
Differential Revision:	https://reviews.freebsd.org/D19475
2019-03-08 01:17:20 +00:00
Bjoern A. Zeeb
30b450774e Update for IETF draft-ietf-6man-ipv6only-flag.
When we roam between networks and our link-state goes down, automatically remove
the IPv6-Only flag from the interface.  Otherwise we might switch from an
IPv6-only to and IPv4-only network and the flag would stay and we would prevent
IPv4 from working.

While the actual function call to clear the flag is under EXPERIMENTAL,
the eventhandler is not as we might want to re-use it for other
functionality on link-down event (such was re-calculate default routers
for example if there is more than one).

Reviewed by:	hrs
Differential Revision:	https://reviews.freebsd.org/D19487
2019-03-07 23:03:39 +00:00
Alexander Motin
ede8782611 Improve entropy for ZFS taskqueue selection.
I just found that at least on Skylake CPUs cpu_ticks() never returns odd
values, only even, and possibly has even bigger step (176/2?), that makes
its lower bits very bad entropy source, leaving half of taskqueues unused.
Switch to sbinuptime(), closer to upstreams, mitigates the problem by the
rate conversion working as kind of hash function.  In case that is somehow
not enough (timer rate is too low or too divisible) mix in curcpu.

MFC after:	1 week
2019-03-07 22:56:39 +00:00
Jilles Tjoelker
56ada93f8a sh/tests: Improve failure messages of expansion/arith15.0 2019-03-07 22:51:58 +00:00
Brooks Davis
9e23ca1c94 Correct my previous correction to the license. It now matches the text
in https://spdx.org/licenses/GPL-2.0.html
2019-03-07 22:34:45 +00:00
Brooks Davis
b1329b31f7 Correct license boilerplate, to match the SPDX tag.
The GPL-2.0 tag is a deprecated tag which means that same thing as
GPL-2.0-only.
2019-03-07 22:20:20 +00:00
Dimitry Andric
5d3c30e56c Pull in r354937 from upstream clang trunk (by Jörg Sonnenberger):
Fix inline assembler constraint validation

  The current constraint logic is both too lax and too strict. It fails
  for input outside the [INT_MIN..INT_MAX] range, but it also
  implicitly accepts 0 as value when it should not. Adjust logic to
  handle both correctly.

  Differential Revision: https://reviews.llvm.org/D58649

Pull in r355491 from upstream clang trunk (by Hans Wennborg):

  Inline asm constraints: allow ICE-like pointers for the "n"
  constraint (PR40890)

  Apparently GCC allows this, and there's code relying on it (see bug).

  The idea is to allow expression that would have been allowed if they
  were cast to int. So I based the code on how such a cast would be
  done (the CK_PointerToIntegral case in
  IntExprEvaluator::VisitCastExpr()).

  Differential Revision: https://reviews.llvm.org/D58821

These should fix assertions and errors when using the inline assembly
"n" constraint in certain ways.

In case of devel/valgrind, a pointer was used as the input for the
constraint, which lead to "Assertion failed: (isInt() && "Invalid
accessor"), function getInt".

In case of math/secp256k1, a very large integer value was used as input
for the constraint, which lead to "error: value '4624529908474429119'
out of range for constraint 'n'".

PR:             236216, 236194
MFC after:      1 month
X-MFC-With:     r344779
2019-03-07 19:33:39 +00:00
Emmanuel Vadot
d83a581cad arm64: allwinner: a64: Add TCON clock
The tcon clock need a mux table for it's parent, for now just
list the parents twice.
2019-03-07 19:32:01 +00:00
Emmanuel Vadot
1788e14d92 arm64: allwinner: Add CCU DE2
The Display Engine 2 have it's own Clock and Control Unit, add support
for it.
2019-03-07 19:30:37 +00:00
Emmanuel Vadot
2b0adb4404 arm: allwinner: Fix NM clock recalc
If the NM clock is using a fractional divider the formula isn't the same.
2019-03-07 19:28:47 +00:00
Emmanuel Vadot
73a41ff81c stand/common/module: Apply style(9) 2019-03-07 18:57:43 +00:00
Conrad Meyer
905fdc3ff1 seq(1): Require user-provided format strings to contain a conversion
This matches GNU seq, for example.

For users that are looking for similar functionality, 'jot -b foo N' will
print 'foo' N times.  See jot(1).

PR:		236347
Reported by:	<y AT maya.st>
Sponsored by:	Dell EMC Isilon
2019-03-07 18:24:16 +00:00
Cy Schubert
052d159a8b MFV r344878:
4.2.8p12 --> 4.2.8p13

MFC after:	immediately
Security:	CVE-2019-8936
		VuXML: c2576e14-36e2-11e9-9eda-206a8a720317
Obtained from:	nwtime.org
2019-03-07 13:36:00 +00:00
Cy Schubert
360c01464a Import 4.2.8p13. 2019-03-07 13:01:16 +00:00
Kristof Provost
16b56c7f4e pf tests: Accelerate tests
Make the tests run slightly faster by having pft_ping.py end the capture
of packets as soon as it sees the expected packet, rather than
continuing to sniff.

MFC after:	2 weeks
2019-03-07 11:09:29 +00:00
Mateusz Piotrowski
fdca34e4a5 Do not reference deskutils/cal from cal.1.
The ports version of cal is an abandonware so in order to minimize the
potential bit rot of our documentation let's not mention it at all.
Interested users are going to find suitable alternatives anyway on their
own.

Reported by:	bapt
Approved by:	bapt (src)
Approved by:	krion (mentor, implicit), mat (mentor, implicit)
Differential Revision:	https://reviews.freebsd.org/D19492
2019-03-07 11:09:25 +00:00
Mateusz Piotrowski
a832f42afb Document that cal(1) cannot start a week with Monday.
Reviewed by:	bcr
Approved by:	bcr (doc)
Approved by:	krion (mentor, implicit), mat (mentor, implicit)
Differential Revision:	https://reviews.freebsd.org/D19491
2019-03-07 10:19:40 +00:00
Andrey V. Elsukov
40025d42fd Fix typo.
MFC after:	1 week
2019-03-07 10:01:32 +00:00
Michael Tuexen
e6dcce69ca After removing an entry from the stream scheduler list, set the pointers
to NULL, since we are checking for it in case the element gets inserted
again.

This issue was found by running syzkaller.

MFC after:		3 days
2019-03-07 08:43:20 +00:00
Justin Hibbits
058250a8ab powerpc: Save stack pointer in savectx
This allows 'show acttrace' to show backtrace on processes currently running
on CPUs.

Reported by:	Brandon Bergren
MFC after:	1 week
2019-03-07 04:43:08 +00:00
Andrey V. Elsukov
83354acf5a Fix the problem with O_LIMIT states introduced in r344018.
dyn_install_state() uses `rule` pointer when it creates state.
For O_LIMIT states this pointer actually is not struct ip_fw,
it is pointer to O_LIMIT_PARENT state, that keeps actual pointer
to ip_fw parent rule. Thus we need to cache rule id and number
before calling dyn_get_parent_state(), so we can use them later
when the `rule` pointer is overrided.

PR:		236292
MFC after:	3 days
2019-03-07 04:40:44 +00:00
Matt Macy
8ea23c2b5b add GPL text in addition to SPDX tags as requested by core
MFC after:	1 week
2019-03-07 03:53:48 +00:00
Matt Macy
030963c090 add gcov to LINT build
MFC after:	1 week
2019-03-07 03:50:34 +00:00
Matt Macy
b02af3b2cf Add build time GPL warning when GCOV is enabled
MFC after:	1 week
2019-03-07 03:47:41 +00:00
Alexander Motin
551b7d3a29 Add respective tunables to few ZFS sysctls.
MFC after:	1 week
2019-03-07 01:24:08 +00:00
Conrad Meyer
9a6a45d850 fuse: switch from DFLTPHYS/MAXBSIZE to maxcachebuf
On GENERIC kernels with empty loader.conf, there is no functional change.
DFLTPHYS and MAXBSIZE are both 64kB at the moment.  This change allows
larger bufcache block sizes to be used when either MAXBSIZE (custom kernel)
or the loader.conf tunable vfs.maxbcachebuf (GENERIC) is adjusted higher
than the default.

Suggested by:	ken@
2019-03-07 00:55:49 +00:00
Rebecca Cran
7b1f3e08d9 Document the efivar --load-option option
Reviewed by:	imp, kevans
Sponsored by:	Netflix, Inc.
Differential Revision:	https://reviews.freebsd.org/D19263
2019-03-07 00:01:28 +00:00
Bjoern A. Zeeb
21231a7aa6 Update for IETF draft-ietf-6man-ipv6only-flag.
All changes are hidden behind the EXPERIMENTAL option and are not compiled
in by default.

Add ND6_IFF_IPV6_ONLY_MANUAL to be able to set the interface into no-IPv4-mode
manually without router advertisement options.  This will allow developers to
test software for the appropriate behaviour even on dual-stack networks or
IPv6-Only networks without the option being set in RA messages.
Update ifconfig to allow setting and displaying the flag.

Update the checks for the filters to check for either the automatic or the manual
flag to be set.  Add REVARP to the list of filtered IPv4-related protocols and add
an input filter similar to the output filter.

Add a check, when receiving the IPv6-Only RA flag to see if the receiving
interface has any IPv4 configured.  If it does, ignore the IPv6-Only flag.

Add a per-VNET global sysctl, which is on by default, to not process the automatic
RA IPv6-Only flag.  This way an administrator (if this is compiled in) has control
over the behaviour in case the node still relies on IPv4.
2019-03-06 23:31:42 +00:00
Conrad Meyer
e7df98863b FUSE: Prevent trivial panic
When open(2) was invoked against a FUSE filesystem with an unexpected flags
value (no O_RDONLY / O_RDWR / O_WRONLY), an assertion fired, causing panic.

For now, prevent the panic by rejecting such VOP_OPENs with EINVAL.

This is not considered the correct long term fix, but does prevent an
unprivileged denial-of-service.

PR:		236329
Reported by:	asomers
Reviewed by:	asomers
Sponsored by:	Dell EMC Isilon
2019-03-06 22:56:49 +00:00
John Baldwin
2e43efd0bb Drop "All rights reserved" from my copyright statements.
Reviewed by:	rgrimes
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D19485
2019-03-06 22:11:45 +00:00
John Baldwin
e91609a771 Divorce MK_GDB from MK_BINUTILS.
This permits legacy GDB to still be built and installed if
WITHOUT_BINUTILS is set (e.g. if base/binutils is installed).

Reviewed by:	emaste
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D19480
2019-03-06 20:13:02 +00:00
John Baldwin
bfdf8aa9f7 Regenerate src.conf.5 for recent changes.
Updates include removal of DRM2 and addition of several options
related to secure booting.
2019-03-06 20:10:23 +00:00
Dimitry Andric
01c21ea0a7 Put in a temporary workaround for what is likely a gcc 6 bug (it does
not occur with gcc 7 or later).  This should prevent the following error
from breaking the head-amd64-gcc CI builds:

In file included from /workspace/src/contrib/llvm/tools/lldb/source/API/SBMemoryRegionInfo.cpp:14:0:
/workspace/src/contrib/llvm/tools/lldb/include/lldb/Target/MemoryRegionInfo.h:128:54: error: 'template<class _InputIterator> lldb_private::MemoryRegionInfos::MemoryRegionInfos(_InputIterator, _InputIterator, const allocator_type&)' inherited from 'std::__1::vector<lldb_private::MemoryRegionInfo>'
   using std::vector<lldb_private::MemoryRegionInfo>::vector;
                                                      ^~~~~~
/workspace/src/contrib/llvm/tools/lldb/include/lldb/Target/MemoryRegionInfo.h:128:54: error: conflicts with version inherited from 'std::__1::vector<lldb_private::MemoryRegionInfo>'

Reported by:	CI
2019-03-06 18:19:27 +00:00
Benedict Reuschling
1e61b94049 Update the core-secretary role.
With the last core election, matthew@ stepped down and handed over to jrm@ to
serve as new core secretary. Update this file to match.

Approved by:	core (implicit)
2019-03-06 17:37:56 +00:00
Mark Johnston
f3af92bd36 Reorder copyright lines to preserve the source of "All rights reserved."
Reported by:	rgrimes
MFC with:	r344829, r344830
2019-03-06 16:50:14 +00:00
Alexander Motin
fcc8734127 Flush stdout after each iteration.
Without this, if output is redirected from the console, it is buffered for
too long, making tool quite unusable.

MFC after:	1 week
Sponsored by:	iXsystems, Inc.
2019-03-06 15:19:04 +00:00
Adrian Chadd
34d5464b85 [ath_hal_ar9300] Add the missing bits from the previous HAL commit.
Noticed by: 75+ emails telling me I messed up.
2019-03-06 08:52:02 +00:00
Adrian Chadd
28adfbfe13 [athani] Add a simple tool to list and control ANI parameters.
This is a WIP tool I'm using to figure out why ANI is weirdly busted in my
home FreeBSD AP/STA setup.  Although athstats (mostly) gets the ANI statistics
correct, ANI is making the radio deaf it doesn't recover without being disabled.

It's very WIP.

Tested:

* Carambola 2,  (AR9331), AP/STA mode.
2019-03-06 07:58:19 +00:00
Adrian Chadd
7fbcfe69e7 [ath_hal] [ath_hal_ar9300] ANI fixes and preparation for userland control.
* The ani function bitmap was being badly used when determining if a command
  could be used.  In hostap modes only a couple of the ANI control parameters
  are enabled.

* The ani function bitmap was not being reset to HAL_ANI_ALL if transitioning
  from AP -> STA.

* Change mrcCckOff to mrcCck - 1 == on, rather than 1 == off.  This matches
  the API used to set the value from userland via the diagnostic API.

* Handle OFDM/CCK noise immunity level commands in ar9300_ani_control().
  These will only come from userland and it will go and program the rest of
  the ANI control parameters with the values in the ANI table.

* Ensure all of the ANI parameters can be tweaked at runtime, even if they're
  disabled.

Tested:

* carambola2 (AR9331), STA/AP modes
2019-03-06 07:54:29 +00:00
Marcin Wojtas
13ea0450a9 Extend libsecureboot(old libve) to obtain trusted certificates from UEFI and implement revocation
UEFI related headers were copied from edk2.

A new build option "MK_LOADER_EFI_SECUREBOOT" was added to allow
loading of trusted anchors from UEFI.

Certificate revocation support is also introduced.
The forbidden certificates are loaded from dbx variable.
Verification fails in two cases:

There is a direct match between cert in dbx and the one in the chain.
The CA used to sign the chain is found in dbx.
One can also insert a hash of TBS section of a certificate into dbx.
In this case verifications fails only if a direct match with a
certificate in chain is found.

Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision:	https://reviews.freebsd.org/D19093
2019-03-06 06:39:42 +00:00
Rebecca Cran
ce37b71e68 Add retry loop around GetMemoryMap call to fix fragmentation bug
The call to BS->AllocatePages can cause the memory map to become framented,
causing BS->GetMemoryMap to return EFI_BUFFER_TOO_SMALL more than once. For
example this can happen on the MinnowBoard Turbot, causing the boot to stop
with an error. Avoid this by calling GetMemoryMap in a loop.

Reviewed by:	imp, tsoome, kevans
Differential Revision:	https://reviews.freebsd.org/D19341
2019-03-06 05:39:40 +00:00
Cy Schubert
151c6d1020 Remove an empty directory emptied by r343702.
MFC after:	3 days
2019-03-06 02:52:58 +00:00
Mark Johnston
3b5b20292b Implement minidump support for RISC-V.
Submitted by:	Mitchell Horne <mhorne063@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D18320
2019-03-06 00:01:06 +00:00
Mark Johnston
5e58ed820a Add riscv minidump support to libkvm.
Submitted by:	Mitchell Horne <mhorne063@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D19171
2019-03-05 23:59:55 +00:00
Mark Johnston
3a3dfb2815 Initialize dump_avail[] on riscv.
Submitted by:	Mitchell Horne <mhorne063@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D19170
2019-03-05 23:58:16 +00:00
Mark Johnston
91c3fda00b Add pmap_get_tables() for riscv.
This mirrors the arm64 implementation and is for use in the minidump
code.

Submitted by:	Mitchell Horne <mhorne063@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D18321
2019-03-05 23:56:40 +00:00
Marcel Moolenaar
835adc6898 Round # partitions up to fill the last GPT table sector
Set the number of partitions entries in the GPT header to a
multiple of the number of entries that fit in a sector.

PR:		236238
Reviewed by:	imp
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D19465
2019-03-05 22:55:33 +00:00
Dimitry Andric
0a4621159b Add a few missed files to the MK_LLVM_TARGET_BPF=yes case, otherwise
clang and various other executables will fail to link with undefined
symbols.

Reported by:	O. Hartmann <ohartmann@walstatt.org>
MFC after:	1 month
X-MFC-With:	r344779
2019-03-05 22:04:23 +00:00
Mark Johnston
6a85590370 Show wiring state of map entries in procstat -v.
Note that only entries wired by userspace are shown as such.  In
particular, entries transiently wired by sysctl_wire_old_buffer() are
not flagged as wired in procstat -v output.

Reviewed by:	kib (previous version)
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D19461
2019-03-05 19:45:37 +00:00